/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_basic.hxx"
#include <tools/errcode.hxx>
#include <basic/sbx.hxx>
#include "sbxconv.hxx"

#include "unotools/syslocale.hxx"

#if defined ( UNX )
#include <stdlib.h>
#endif

#ifndef _APP_HXX //autogen
#include <vcl/svapp.hxx>
#endif
#include <math.h>
#include <string.h>
#include <ctype.h>

#include "sbxres.hxx"
#include <basic/sbxbase.hxx>
#include <basic/sbxform.hxx>
#include <svtools/svtools.hrc>

#include "basrid.hxx"
#include "runtime.hxx"

#include <svl/zforlist.hxx>
#include <comphelper/processfactory.hxx>


void ImpGetIntntlSep( sal_Unicode& rcDecimalSep, sal_Unicode& rcThousandSep )
{
    SvtSysLocale aSysLocale;
    const LocaleDataWrapper& rData = aSysLocale.GetLocaleData();
	rcDecimalSep = rData.getNumDecimalSep().GetBuffer()[0];
	rcThousandSep = rData.getNumThousandSep().GetBuffer()[0];
}

// Scannen eines Strings nach BASIC-Konventionen
// Dies entspricht den ueblichen Konventionen, nur dass der Exponent
// auch ein D sein darf, was den Datentyp auf SbxDOUBLE festlegt.
// Die Routine versucht, den Datentyp so klein wie moeglich zu gestalten.
// Das ganze gibt auch noch einen Konversionsfehler, wenn der Datentyp
// Fixed ist und das ganze nicht hineinpasst!

SbxError ImpScan( const ::rtl::OUString& rWSrc, double& nVal, SbxDataType& rType,
				  sal_uInt16* pLen, sal_Bool bAllowIntntl, sal_Bool bOnlyIntntl )
{
	::rtl::OString aBStr( ::rtl::OUStringToOString( rWSrc, RTL_TEXTENCODING_ASCII_US ) );

	// Bei International Komma besorgen
	char cIntntlComma, cIntntl1000;
	char cNonIntntlComma = '.';

    sal_Unicode cDecimalSep, cThousandSep = 0;
	if( bAllowIntntl || bOnlyIntntl )
	{
        ImpGetIntntlSep( cDecimalSep, cThousandSep );
		cIntntlComma = (char)cDecimalSep;
        cIntntl1000 = (char)cThousandSep;
	}
	// Sonst einfach auch auf . setzen
	else
	{
		cIntntlComma = cNonIntntlComma;
		cIntntl1000 = cNonIntntlComma;	// Unschaedlich machen
	}
	// Nur International -> IntnlComma uebernehmen
	if( bOnlyIntntl )
	{
		cNonIntntlComma = cIntntlComma;
		cIntntl1000 = (char)cThousandSep;
	}

	const char* pStart = aBStr.getStr();
	const char* p = pStart;
	char buf[ 80 ], *q = buf;
	sal_Bool bRes = sal_True;
	sal_Bool bMinus = sal_False;
	nVal = 0;
	SbxDataType eScanType = SbxSINGLE;
	// Whitespace wech
	while( *p &&( *p == ' ' || *p == '\t' ) ) p++;
	// Zahl? Dann einlesen und konvertieren.
	if( *p == '-' )
		p++, bMinus = sal_True;
	if( isdigit( *p ) ||( (*p == cNonIntntlComma || *p == cIntntlComma ||
			*p == cIntntl1000) && isdigit( *(p+1 ) ) ) )
	{
		short exp = 0;		// >0: Exponentteil
		short comma = 0;	// >0: Nachkomma
		short ndig = 0;		// Anzahl Ziffern
		short ncdig = 0;	// Anzahl Ziffern nach Komma
		ByteString aSearchStr( "0123456789DEde" );
		// Kommas ergaenzen
		aSearchStr += cNonIntntlComma;
		if( cIntntlComma != cNonIntntlComma )
			aSearchStr += cIntntlComma;
		if( bOnlyIntntl )
			aSearchStr += cIntntl1000;
		const char* pSearchStr = aSearchStr.GetBuffer();
		while( strchr( pSearchStr, *p ) && *p )
		{
			// 1000er-Trenner ueberlesen
			if( bOnlyIntntl && *p == cIntntl1000 )
			{
				p++;
				continue;
			}

			// Komma oder Exponent?
			if( *p == cNonIntntlComma || *p == cIntntlComma )
			{
				// Immer '.' einfuegen, damit atof funktioniert
				p++;
				if( ++comma > 1 )
					continue;
				else
					*q++ = '.';
			}
			else if( strchr( "DdEe", *p ) )
			{
				if( ++exp > 1 )
				{
					p++; continue;
				}
				if( toupper( *p ) == 'D' )
					eScanType = SbxDOUBLE;
				*q++ = 'E'; p++;
				// Vorzeichen hinter Exponent?
				if( *p == '+' )
					p++;
				else
				if( *p == '-' )
					*q++ = *p++;
			}
			else
			{
				*q++ = *p++;
				if( comma && !exp ) ncdig++;
			}
			if( !exp ) ndig++;
		}
		*q = 0;
		// Komma, Exponent mehrfach vorhanden?
		if( comma > 1 || exp > 1 )
			bRes = sal_False;
		// Kann auf Integer gefaltet werden?
		if( !comma && !exp )
		{
			if( nVal >= SbxMININT && nVal <= SbxMAXINT )
				eScanType = SbxINTEGER;
			else if( nVal >= SbxMINLNG && nVal <= SbxMAXLNG )
				eScanType = SbxLONG;
		}

		nVal = atof( buf );
		ndig = ndig - comma;
		// zu viele Zahlen fuer SINGLE?
		if( ndig > 15 || ncdig > 6 )
			eScanType = SbxDOUBLE;

		// Typkennung?
		if( strchr( "%!&#", *p ) && *p ) p++;
	}
	// Hex/Oktalzahl? Einlesen und konvertieren:
	else if( *p == '&' )
	{
		p++;
		eScanType = SbxLONG;
		const char *cmp = "0123456789ABCDEF";
		char base = 16;
		char ndig = 8;
		char xch  = *p++;
		switch( toupper( xch ) )
		{
			case 'O': cmp = "01234567"; base = 8; ndig = 11; break;
			case 'H': break;
			default : bRes = sal_False;
		}
		long l = 0;
		int i;
		while( isalnum( *p ) )
		{
			char ch = sal::static_int_cast< char >( toupper( *p ) );
			p++;
			if( strchr( cmp, ch ) ) *q++ = ch;
			else bRes = sal_False;
		}
		*q = 0;
		for( q = buf; *q; q++ )
		{
			i =( *q & 0xFF ) - '0';
			if( i > 9 ) i -= 7;
			l =( l * base ) + i;
			if( !ndig-- )
				bRes = sal_False;
		}
		if( *p == '&' ) p++;
		nVal = (double) l;
		if( l >= SbxMININT && l <= SbxMAXINT )
			eScanType = SbxINTEGER;
	}
	else if ( SbiRuntime::isVBAEnabled() )
	{
		OSL_TRACE("Reporting error converting");
		return SbxERR_CONVERSION;
	}
	if( pLen )
		*pLen = (sal_uInt16) ( p - pStart );
	if( !bRes )
		return SbxERR_CONVERSION;
	if( bMinus )
		nVal = -nVal;
	rType = eScanType;
	return SbxERR_OK;
}

// Schnittstelle fuer CDbl im Basic
SbxError SbxValue::ScanNumIntnl( const String& rSrc, double& nVal, sal_Bool bSingle )
{
	SbxDataType t;
	sal_uInt16 nLen = 0;
	SbxError nRetError = ImpScan( rSrc, nVal, t, &nLen,
		/*bAllowIntntl*/sal_False, /*bOnlyIntntl*/sal_True );
	// Komplett gelesen?
	if( nRetError == SbxERR_OK && nLen != rSrc.Len() )
		nRetError = SbxERR_CONVERSION;

	if( bSingle )
	{
		SbxValues aValues( nVal );
		nVal = (double)ImpGetSingle( &aValues );	// Hier Error bei Overflow
	}
	return nRetError;
}

////////////////////////////////////////////////////////////////////////////

static double roundArray[] = {
	5.0e+0, 0.5e+0,	0.5e-1,	0.5e-2,	0.5e-3,	0.5e-4,	0.5e-5,	0.5e-6,	0.5e-7,
	0.5e-8,	0.5e-9,	0.5e-10,0.5e-11,0.5e-12,0.5e-13,0.5e-14,0.5e-15 };

/***************************************************************************
|*
|*	void myftoa( double, char *, short, short, sal_Bool, sal_Bool )
|*
|*	Beschreibung:		Konversion double --> ASCII
|*	Parameter:			double				die Zahl.
|*						char *				der Zielpuffer
|*						short				Anzahl Nachkommastellen
|*						short				Weite des Exponenten( 0=kein E )
|*						sal_Bool				sal_True: mit 1000er Punkten
|*						sal_Bool				sal_True: formatfreie Ausgabe
|*
***************************************************************************/

static void myftoa( double nNum, char * pBuf, short nPrec, short nExpWidth,
					sal_Bool bPt, sal_Bool bFix, sal_Unicode cForceThousandSep = 0 )
{

	short nExp = 0;						// Exponent
	short nDig = nPrec + 1;				// Anzahl Digits in Zahl
	short nDec;							// Anzahl Vorkommastellen
	register int i, digit;

	// Komma besorgen
    sal_Unicode cDecimalSep, cThousandSep;
    ImpGetIntntlSep( cDecimalSep, cThousandSep );
    if( cForceThousandSep )
        cThousandSep = cForceThousandSep;

	// Exponentberechnung:
	nExp = 0;
	if( nNum > 0.0 )
	{
		while( nNum <   1.0 ) nNum *= 10.0, nExp--;
		while( nNum >= 10.0 ) nNum /= 10.0, nExp++;
	}
	if( !bFix && !nExpWidth )
		nDig = nDig + nExp;
	else if( bFix && !nPrec )
		nDig = nExp + 1;

	// Zahl runden:
	if( (nNum += roundArray [( nDig > 16 ) ? 16 : nDig] ) >= 10.0 )
	{
		nNum = 1.0;
		++nExp;
		if( !nExpWidth ) ++nDig;
	}

	// Bestimmung der Vorkommastellen:
	if( !nExpWidth )
	{
		if( nExp < 0 )
		{
			// #41691: Auch bei bFix eine 0 spendieren
			*pBuf++ = '0';
			if( nPrec ) *pBuf++ = (char)cDecimalSep;
			i = -nExp - 1;
			if( nDig <= 0 ) i = nPrec;
			while( i-- )	*pBuf++ = '0';
			nDec = 0;
		}
		else
			nDec = nExp+1;
	}
	else
		nDec = 1;

	// Zahl ausgeben:
	if( nDig > 0 )
	{
		for( i = 0 ; ; ++i )
		{
			if( i < 16 )
			{
				digit = (int) nNum;
				*pBuf++ = sal::static_int_cast< char >(digit + '0');
				nNum =( nNum - digit ) * 10.0;
			} else
				*pBuf++ = '0';
			if( --nDig == 0 ) break;
			if( nDec )
			{
				nDec--;
				if( !nDec )
					*pBuf++ = (char)cDecimalSep;
				else if( !(nDec % 3 ) && bPt )
					*pBuf++ = (char)cThousandSep;
			}
		}
	}

	// Exponent ausgeben:
	if( nExpWidth )
	{
		if( nExpWidth < 3 ) nExpWidth = 3;
		nExpWidth -= 2;
		*pBuf++ = 'E';
		*pBuf++ =( nExp < 0 ) ?( (nExp = -nExp ), '-' ) : '+';
		while( nExpWidth > 3 ) *pBuf++ = '0', nExpWidth--;
		if( nExp >= 100 || nExpWidth == 3 )
		{
			*pBuf++ = sal::static_int_cast< char >(nExp/100 + '0');
			nExp %= 100;
		}
		if( nExp/10 || nExpWidth >= 2 )
			*pBuf++ = sal::static_int_cast< char >(nExp/10 + '0');
		*pBuf++ = sal::static_int_cast< char >(nExp%10 + '0');
	}
	*pBuf = 0;
}

// Die Zahl wird unformatiert mit der angegebenen Anzahl NK-Stellen
// aufbereitet. Evtl. wird ein Minus vorangestellt.
// Diese Routine ist public, weil sie auch von den Put-Funktionen
// der Klasse SbxImpSTRING verwendet wird.

#ifdef _MSC_VER
#pragma optimize( "", off )
#pragma warning(disable: 4748) // "... because optimizations are disabled ..."
#endif

void ImpCvtNum( double nNum, short nPrec, ::rtl::OUString& rRes, sal_Bool bCoreString )
{
	char *q;
	char cBuf[ 40 ], *p = cBuf;

    sal_Unicode cDecimalSep, cThousandSep;
    ImpGetIntntlSep( cDecimalSep, cThousandSep );
    if( bCoreString )
        cDecimalSep = '.';

	if( nNum < 0.0 ) {
		nNum = -nNum;
		*p++ = '-';
	}
	double dMaxNumWithoutExp = (nPrec == 6) ? 1E6 : 1E14;
	myftoa( nNum, p, nPrec,( nNum &&( nNum < 1E-1 || nNum > dMaxNumWithoutExp ) ) ? 4:0,
        sal_False, sal_True, cDecimalSep );
	// Trailing Zeroes weg:
	for( p = cBuf; *p &&( *p != 'E' ); p++ ) {}
	q = p; p--;
	while( nPrec && *p == '0' ) nPrec--, p--;
	if( *p == cDecimalSep ) p--;
	while( *q ) *++p = *q++;
	*++p = 0;
	rRes = ::rtl::OUString::createFromAscii( cBuf );
}

#ifdef _MSC_VER
#pragma optimize( "", on )
#endif

sal_Bool ImpConvStringExt( ::rtl::OUString& rSrc, SbxDataType eTargetType )
{
	// Merken, ob ueberhaupt was geaendert wurde
	sal_Bool bChanged = sal_False;
	::rtl::OUString aNewString;

	// Nur Spezial-Fälle behandeln, als Default tun wir nichts
	switch( eTargetType )
	{
		// Bei Fliesskomma International beruecksichtigen
		case SbxSINGLE:
		case SbxDOUBLE:
		case SbxCURRENCY:
		{
			::rtl::OString aBStr( ::rtl::OUStringToOString( rSrc, RTL_TEXTENCODING_ASCII_US ) );

			// Komma besorgen
            sal_Unicode cDecimalSep, cThousandSep;
            ImpGetIntntlSep( cDecimalSep, cThousandSep );
			aNewString = rSrc;

			// Ersetzen, wenn DecimalSep kein '.' (nur den ersten)
			if( cDecimalSep != (sal_Unicode)'.' )
			{
				sal_Int32 nPos = aNewString.indexOf( cDecimalSep );
				if( nPos != -1 )
				{
                    sal_Unicode* pStr = (sal_Unicode*)aNewString.getStr();
					pStr[nPos] = (sal_Unicode)'.';
					bChanged = sal_True;
				}
			}
			break;
		}

		// Bei sal_Bool sal_True und sal_False als String pruefen
		case SbxBOOL:
		{
			if( rSrc.equalsIgnoreAsciiCaseAscii( "true" ) )
			{
				aNewString = ::rtl::OUString::valueOf( (sal_Int32)SbxTRUE );
				bChanged = sal_True;
			}
			else
			if( rSrc.equalsIgnoreAsciiCaseAscii( "false" ) )
			{
				aNewString = ::rtl::OUString::valueOf( (sal_Int32)SbxFALSE );
				bChanged = sal_True;
			}
			break;
		}
		default: break;
	}
	// String bei Aenderung uebernehmen
	if( bChanged )
		rSrc = aNewString;
	return bChanged;
}


// Formatierte Zahlenausgabe
// Der Returnwert ist die Anzahl Zeichen, die aus dem
// Format verwendt wurden.

#ifdef _old_format_code_
// lasse diesen Code vorl"aufig drin, zum 'abgucken'
// der bisherigen Implementation

static sal_uInt16 printfmtnum( double nNum, XubString& rRes, const XubString& rWFmt )
{
	const String& rFmt = rWFmt;
	char	cFill  = ' ';			// Fuellzeichen
	char	cPre   = 0;				// Startzeichen( evtl. "$" )
	short	nExpDig= 0;				// Anzahl Exponentstellen
	short	nPrec  = 0;				// Anzahl Nachkommastellen
	short	nWidth = 0;				// Zahlenweite gesamnt
	short	nLen;					// Laenge konvertierte Zahl
	sal_Bool	bPoint = sal_False;			// sal_True: mit 1000er Kommas
	sal_Bool	bTrail = sal_False;			// sal_True, wenn folgendes Minus
	sal_Bool	bSign  = sal_False;			// sal_True: immer mit Vorzeichen
	sal_Bool	bNeg   = sal_False;			// sal_True: Zahl ist negativ
	char	cBuf [1024];			// Zahlenpuffer
	char  * p;
	const char* pFmt = rFmt;
	rRes.Erase();
	// $$ und ** abfangen. Einfach wird als Zeichen ausgegeben.
	if( *pFmt == '$' )
	  if( *++pFmt != '$' ) rRes += '$';
	if( *pFmt == '*' )
	  if( *++pFmt != '*' ) rRes += '*';

	switch( *pFmt++ )
	{
		case 0:
			break;
		case '+':
			bSign = sal_True; nWidth++; break;
		case '*':
			nWidth++; cFill = '*';
			if( *pFmt == '$' ) nWidth++, pFmt++, cPre = '$';
			break;
		case '$':
			nWidth++; cPre = '$'; break;
		case '#':
		case '.':
		case ',':
			pFmt--; break;
	}
	// Vorkomma:
	for( ;; )
	{
		while( *pFmt == '#' ) pFmt++, nWidth++;
		// 1000er Kommas?
		if( *pFmt == ',' )
		{
			nWidth++; pFmt++; bPoint = sal_True;
		} else break;
	}
	// Nachkomma:
	if( *pFmt == '.' )
	{
		while( *++pFmt == '#' ) nPrec++;
		nWidth += nPrec + 1;
	}
	// Exponent:
	while( *pFmt == '^' )
		pFmt++, nExpDig++, nWidth++;
	// Folgendes Minus:
	if( !bSign && *pFmt == '-' )
		pFmt++, bTrail = sal_True;

	// Zahl konvertieren:
	if( nPrec > 15 ) nPrec = 15;
	if( nNum < 0.0 ) nNum = -nNum, bNeg = sal_True;
	p = cBuf;
	if( bSign ) *p++ = bNeg ? '-' : '+';
	myftoa( nNum, p, nPrec, nExpDig, bPoint, sal_False );
	nLen = strlen( cBuf );

	// Ueberlauf?
	if( cPre ) nLen++;
	if( nLen > nWidth ) rRes += '%';
	else {
		nWidth -= nLen;
		while( nWidth-- ) rRes += (xub_Unicode)cFill;
		if( cPre ) rRes += (xub_Unicode)cPre;
	}
	rRes += (xub_Unicode*)&(cBuf[0]);
	if( bTrail )
		rRes += bNeg ? '-' : ' ';

	return (sal_uInt16) ( pFmt - (const char*) rFmt );
}

#endif //_old_format_code_

static sal_uInt16 printfmtstr( const XubString& rStr, XubString& rRes, const XubString& rFmt )
{
	const xub_Unicode* pStr = rStr.GetBuffer();
	const xub_Unicode* pFmtStart = rFmt.GetBuffer();
	const xub_Unicode* pFmt = pFmtStart;
	rRes.Erase();
	switch( *pFmt )
	{
		case '!':
				rRes += *pStr++; pFmt++; break;
		case '\\':
			do
			{
				rRes += *pStr ? *pStr++ : static_cast< xub_Unicode >(' ');
				pFmt++;
			} while( *pFmt != '\\' );
			rRes += *pStr ? *pStr++ : static_cast< xub_Unicode >(' ');
			pFmt++; break;
		case '&':
			rRes = rStr;
			pFmt++; break;
		default:
			rRes = rStr;
			break;
	}
	return (sal_uInt16) ( pFmt - pFmtStart );
}

/////////////////////////////////////////////////////////////////////////

sal_Bool SbxValue::Scan( const XubString& rSrc, sal_uInt16* pLen )
{
	SbxError eRes = SbxERR_OK;
	if( !CanWrite() )
		eRes = SbxERR_PROP_READONLY;
	else
	{
		double n;
		SbxDataType t;
		eRes = ImpScan( rSrc, n, t, pLen );
		if( eRes == SbxERR_OK )
		{
			if( !IsFixed() )
				SetType( t );
			PutDouble( n );
		}
	}
	if( eRes )
	{
		SetError( eRes ); return sal_False;
	}
	else
		return sal_True;
}


ResMgr* implGetResMgr( void )
{
	static ResMgr* pResMgr = NULL;
	if( !pResMgr )
	{
		::com::sun::star::lang::Locale aLocale = Application::GetSettings().GetUILocale();
		pResMgr = ResMgr::CreateResMgr(CREATEVERSIONRESMGR_NAME(sb), aLocale );
	}
	return pResMgr;
}

class SbxValueFormatResId : public ResId
{
public:
	SbxValueFormatResId( sal_uInt16 nId )
		: ResId( nId, *implGetResMgr() )
	{}
};


enum VbaFormatType
{
    VBA_FORMAT_TYPE_OFFSET, // standard number format
    VBA_FORMAT_TYPE_USERDEFINED, // user defined number format
    VBA_FORMAT_TYPE_NULL
};

struct VbaFormatInfo
{
    VbaFormatType meType; 
    const char* mpVbaFormat; // Format string in vba
    NfIndexTableOffset meOffset; // SvNumberFormatter format index, if meType = VBA_FORMAT_TYPE_OFFSET
    const char* mpOOoFormat; // if meType = VBA_FORMAT_TYPE_USERDEFINED
};

#define VBA_FORMAT_OFFSET( pcUtf8, eOffset ) \
    { VBA_FORMAT_TYPE_OFFSET, pcUtf8, eOffset, 0 }

#define VBA_FORMAT_USERDEFINED( pcUtf8, pcDefinedUtf8 ) \
    { VBA_FORMAT_TYPE_USERDEFINED, pcUtf8, NF_NUMBER_STANDARD, pcDefinedUtf8 }

static VbaFormatInfo pFormatInfoTable[] = 
{
    VBA_FORMAT_OFFSET( "Long Date", NF_DATE_SYSTEM_LONG ),
    VBA_FORMAT_USERDEFINED( "Medium Date", "DD-MMM-YY" ),
    VBA_FORMAT_OFFSET( "Short Date", NF_DATE_SYSTEM_SHORT ),
    VBA_FORMAT_USERDEFINED( "Long Time", "H:MM:SS AM/PM" ), 
    VBA_FORMAT_OFFSET( "Medium Time", NF_TIME_HHMMAMPM ),
    VBA_FORMAT_OFFSET( "Short Time", NF_TIME_HHMM ),
    VBA_FORMAT_OFFSET( "ddddd", NF_DATE_SYSTEM_SHORT ),
    VBA_FORMAT_OFFSET( "dddddd", NF_DATE_SYSTEM_LONG ),
    VBA_FORMAT_USERDEFINED( "ttttt", "H:MM:SS AM/PM" ),
    VBA_FORMAT_OFFSET( "ww", NF_DATE_WW ),
    { VBA_FORMAT_TYPE_NULL, 0, NF_INDEX_TABLE_ENTRIES, 0 }
};

VbaFormatInfo* getFormatInfo( const String& rFmt )
{
    VbaFormatInfo* pInfo = NULL;
    sal_Int16 i = 0;
    while( (pInfo = pFormatInfoTable + i )->mpVbaFormat != NULL )
    {
        if( rFmt.EqualsIgnoreCaseAscii( pInfo->mpVbaFormat ) )
            break;
        i++;    
    }
    return pInfo;
}

#define VBAFORMAT_GENERALDATE       "General Date"
#define VBAFORMAT_C                 "c"
#define VBAFORMAT_N                 "n"
#define VBAFORMAT_NN                "nn"
#define VBAFORMAT_W                 "w"
#define VBAFORMAT_Y                 "y"
#define VBAFORMAT_LOWERCASE  		"<"
#define VBAFORMAT_UPPERCASE  		">"

// From methods1.cxx
sal_Int16 implGetWeekDay( double aDate, bool bFirstDayParam = false, sal_Int16 nFirstDay = 0 );
// from methods.cxx
sal_Int16 implGetMinute( double dDate );
sal_Int16 implGetDateYear( double aDate );
sal_Bool implDateSerial( sal_Int16 nYear, sal_Int16 nMonth, sal_Int16 nDay, double& rdRet );

void SbxValue::Format( XubString& rRes, const XubString* pFmt ) const
{
	short nComma = 0;
	double d = 0;

	// pflin, It is better to use SvNumberFormatter to handle the date/time/number format.
	// the SvNumberFormatter output is mostly compatible with 
	// VBA output besides the OOo-basic output
	if( pFmt && !SbxBasicFormater::isBasicFormat( *pFmt ) )
	{
		String aStr = GetString();

        SvtSysLocale aSysLocale;
        const CharClass& rCharClass = aSysLocale.GetCharClass();

		if( pFmt->EqualsIgnoreCaseAscii( VBAFORMAT_LOWERCASE ) )
		{
            rCharClass.toLower( aStr );
            rRes = aStr;
			return;
		}
		if( pFmt->EqualsIgnoreCaseAscii( VBAFORMAT_UPPERCASE ) )
		{
            rCharClass.toUpper( aStr );
            rRes = aStr;
			return;
		}

		LanguageType eLangType = GetpApp()->GetSettings().GetLanguage();
		com::sun::star::uno::Reference< com::sun::star::lang::XMultiServiceFactory > 
			xFactory = comphelper::getProcessServiceFactory();
		SvNumberFormatter aFormatter( xFactory, eLangType );

		sal_uInt32 nIndex;
		xub_StrLen nCheckPos = 0;
		short nType;
		double nNumber;
		Color* pCol;

	    sal_Bool bSuccess = aFormatter.IsNumberFormat( aStr, nIndex, nNumber );

    	// number format, use SvNumberFormatter to handle it. 
	    if( bSuccess )
    	{
			String aFmtStr = *pFmt;
	        VbaFormatInfo* pInfo = getFormatInfo( aFmtStr );
    	    if( pInfo && pInfo->meType != VBA_FORMAT_TYPE_NULL )
       		{
            	if( pInfo->meType == VBA_FORMAT_TYPE_OFFSET )
	            {
    	            nIndex = aFormatter.GetFormatIndex( pInfo->meOffset, eLangType );
            	}
        	    else
           		{
                	aFmtStr.AssignAscii( pInfo->mpOOoFormat );
	                aFormatter.PutandConvertEntry( aFmtStr, nCheckPos, nType, nIndex, LANGUAGE_ENGLISH, eLangType );
    	        }
	    	    aFormatter.GetOutputString( nNumber, nIndex, rRes, &pCol );
	        }
    	    else if( aFmtStr.EqualsIgnoreCaseAscii( VBAFORMAT_GENERALDATE )
        	        || aFmtStr.EqualsIgnoreCaseAscii( VBAFORMAT_C )) 
	        {
            	if( nNumber <=-1.0 || nNumber >= 1.0 )
        	    {
    	            // short date 
            	    nIndex = aFormatter.GetFormatIndex( NF_DATE_SYSTEM_SHORT, eLangType );
	           		aFormatter.GetOutputString( nNumber, nIndex, rRes, &pCol );
                
	                // long time
    	            if( floor( nNumber ) != nNumber )
        	        {
                		aFmtStr.AssignAscii( "H:MM:SS AM/PM" );
		                aFormatter.PutandConvertEntry( aFmtStr, nCheckPos, nType, nIndex, LANGUAGE_ENGLISH, eLangType );
                	    String aTime;
		                aFormatter.GetOutputString( nNumber, nIndex, aTime, &pCol );
    	                rRes.AppendAscii(" ");
            	        rRes += aTime;
        	        }
            	}
	            else
    	        {
        	        // long time only
                	aFmtStr.AssignAscii( "H:MM:SS AM/PM" );
		            aFormatter.PutandConvertEntry( aFmtStr, nCheckPos, nType, nIndex, LANGUAGE_ENGLISH, eLangType );
	            	aFormatter.GetOutputString( nNumber, nIndex, rRes, &pCol );
	            }
    	    }
        	else if( aFmtStr.EqualsIgnoreCaseAscii( VBAFORMAT_N )
            	    || aFmtStr.EqualsIgnoreCaseAscii( VBAFORMAT_NN )) 
	        {
    	        sal_Int32 nMin = implGetMinute( nNumber );
        	    if( nMin < 10 && aFmtStr.EqualsIgnoreCaseAscii( VBAFORMAT_NN ) )
            	{
                	// Minute in two digits
	                 sal_Unicode* p = rRes.AllocBuffer( 2 );
    	             *p++ = '0';
        	         *p = sal_Unicode( '0' + nMin );
            	}
	            else
    	        {
        	        rRes = String::CreateFromInt32( nMin );
            	}
	        }
    	    else if( aFmtStr.EqualsIgnoreCaseAscii( VBAFORMAT_W ))
        	{
	            sal_Int32 nWeekDay = implGetWeekDay( nNumber );
    	        rRes = String::CreateFromInt32( nWeekDay );
        	}
	        else if( aFmtStr.EqualsIgnoreCaseAscii( VBAFORMAT_Y ))
    	    {
				sal_Int16 nYear = implGetDateYear( nNumber );
				double dBaseDate;
				implDateSerial( nYear, 1, 1, dBaseDate );
				sal_Int32 nYear32 = 1 + sal_Int32( nNumber - dBaseDate );
            	rRes = String::CreateFromInt32( nYear32 );
	        }
    	    else
        	{
	            aFormatter.PutandConvertEntry( aFmtStr, nCheckPos, nType, nIndex, LANGUAGE_ENGLISH, eLangType );
		        aFormatter.GetOutputString( nNumber, nIndex, rRes, &pCol );
        	}

			return;
	    }
	}

	SbxDataType eType = GetType();
	switch( eType )
	{
		case SbxCHAR:
		case SbxBYTE:
		case SbxINTEGER:
		case SbxUSHORT:
		case SbxLONG:
		case SbxULONG:
		case SbxINT:
		case SbxUINT:
		case SbxNULL:		// #45929 NULL mit durchschummeln
			nComma = 0;		goto cvt;
		case SbxSINGLE:
			nComma = 6;		goto cvt;
		case SbxDOUBLE:
			nComma = 14;

		cvt:
			if( eType != SbxNULL )
				d = GetDouble();

			// #45355 weiterer Einsprungpunkt fuer isnumeric-String
		cvt2:
			if( pFmt )
			{
				// hole die 'statischen' Daten f"ur Sbx
				SbxAppData* pData = GetSbxData_Impl();

                LanguageType eLangType = GetpApp()->GetSettings().GetLanguage();
				if( pData->pBasicFormater )
                {
                    if( pData->eBasicFormaterLangType != eLangType )
                    {
                        delete pData->pBasicFormater;
                        pData->pBasicFormater = NULL;
                    }
                }
                pData->eBasicFormaterLangType = eLangType;

				// falls bisher noch kein BasicFormater-Objekt
				// existiert, so erzeuge dieses
				if( !pData->pBasicFormater )
				{
                    SvtSysLocale aSysLocale;
                    const LocaleDataWrapper& rData = aSysLocale.GetLocaleData();
					sal_Unicode cComma = rData.getNumDecimalSep().GetBuffer()[0];
					sal_Unicode c1000  = rData.getNumThousandSep().GetBuffer()[0];
					String aCurrencyStrg = rData.getCurrSymbol();
 
					// Initialisierung des Basic-Formater-Hilfsobjekts:
					// hole die Resourcen f"ur die vordefinierten Ausgaben
					// des Format()-Befehls, z.B. f"ur "On/Off".
					String aOnStrg = String( SbxValueFormatResId(
						STR_BASICKEY_FORMAT_ON ) );
					String aOffStrg = String( SbxValueFormatResId(
						STR_BASICKEY_FORMAT_OFF) );
					String aYesStrg = String( SbxValueFormatResId(
						STR_BASICKEY_FORMAT_YES) );
					String aNoStrg = String( SbxValueFormatResId(
						STR_BASICKEY_FORMAT_NO) );
					String aTrueStrg = String( SbxValueFormatResId(
						STR_BASICKEY_FORMAT_TRUE) );
					String aFalseStrg = String( SbxValueFormatResId(
						STR_BASICKEY_FORMAT_FALSE) );
					String aCurrencyFormatStrg = String( SbxValueFormatResId(
						STR_BASICKEY_FORMAT_CURRENCY) );
					// erzeuge das Basic-Formater-Objekt
					pData->pBasicFormater
						= new SbxBasicFormater( cComma,c1000,aOnStrg,aOffStrg,
									aYesStrg,aNoStrg,aTrueStrg,aFalseStrg,
									aCurrencyStrg,aCurrencyFormatStrg );
				}
				// Bem.: Aus Performance-Gr"unden wird nur EIN BasicFormater-
				//    Objekt erzeugt und 'gespeichert', dadurch erspart man
				// 	  sich das teure Resourcen-Laden (f"ur landesspezifische
				//    vordefinierte Ausgaben, z.B. "On/Off") und die st"andige
				//    String-Erzeugungs Operationen.
				// ABER: dadurch ist dieser Code NICHT multithreading f"ahig !

				// hier gibt es Probleme mit ;;;Null, da diese Methode nur aufgerufen
				// wird, wenn der SbxValue eine Zahl ist !!!
				// dazu koennte: pData->pBasicFormater->BasicFormatNull( *pFmt ); aufgerufen werden !
				if( eType != SbxNULL )
				{
					rRes = pData->pBasicFormater->BasicFormat( d ,*pFmt );
				}
				else
				{
					rRes = pData->pBasicFormater->BasicFormatNull( *pFmt );
				}

				// Die alte Implementierung:
				//old: printfmtnum( GetDouble(), rRes, *pFmt );
			}
			else
            {
                ::rtl::OUString aTmpString( rRes );
				ImpCvtNum( GetDouble(), nComma, aTmpString );
                rRes = aTmpString;
            }
			break;
		case SbxSTRING:
			if( pFmt )
			{
				// #45355 wenn es numerisch ist, muss gewandelt werden
				if( IsNumericRTL() )
				{
					ScanNumIntnl( GetString(), d, /*bSingle*/sal_False );
					goto cvt2;
				}
				else
				{
					// Sonst String-Formatierung
					printfmtstr( GetString(), rRes, *pFmt );
				}
			}
			else
				rRes = GetString();
			break;
		default:
			rRes = GetString();
	}
}