/************************************************************** * * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. * *************************************************************/ // MARKER(update_precomp.py): autogen include statement, do not remove #include "precompiled_cui.hxx" // include --------------------------------------------------------------- #include #include #include #include #include #include #include #include #include #include "transfrm.hrc" #include #include "transfrm.hxx" #include #include "svx/dlgutil.hxx" #include #include "svx/anchorid.hxx" #include #include #include #include // Toleranz fuer WorkingArea #define DIFF 1000 // static ---------------------------------------------------------------- static sal_uInt16 pPosSizeRanges[] = { SID_ATTR_TRANSFORM_POS_X, SID_ATTR_TRANSFORM_POS_Y, SID_ATTR_TRANSFORM_PROTECT_POS, SID_ATTR_TRANSFORM_PROTECT_POS, SID_ATTR_TRANSFORM_INTERN, SID_ATTR_TRANSFORM_INTERN, SID_ATTR_TRANSFORM_ANCHOR, SID_ATTR_TRANSFORM_VERT_ORIENT, SID_ATTR_TRANSFORM_WIDTH, SID_ATTR_TRANSFORM_SIZE_POINT, SID_ATTR_TRANSFORM_PROTECT_POS, SID_ATTR_TRANSFORM_INTERN, SID_ATTR_TRANSFORM_AUTOWIDTH, SID_ATTR_TRANSFORM_AUTOHEIGHT, 0 }; static sal_uInt16 pAngleRanges[] = { SID_ATTR_TRANSFORM_ROT_X, SID_ATTR_TRANSFORM_ANGLE, SID_ATTR_TRANSFORM_INTERN, SID_ATTR_TRANSFORM_INTERN, 0 }; static sal_uInt16 pSlantRanges[] = { SDRATTR_ECKENRADIUS, SDRATTR_ECKENRADIUS, SID_ATTR_TRANSFORM_SHEAR, SID_ATTR_TRANSFORM_SHEAR_VERTICAL, SID_ATTR_TRANSFORM_INTERN, SID_ATTR_TRANSFORM_INTERN, 0 }; void lcl_ConvertRect(basegfx::B2DRange& rRange, const sal_uInt16 nDigits, const MapUnit ePoolUnit, const FieldUnit eDlgUnit) { const basegfx::B2DPoint aTopLeft( (double)MetricField::ConvertValue(basegfx::fround(rRange.getMinX()), nDigits, ePoolUnit, eDlgUnit), (double)MetricField::ConvertValue(basegfx::fround(rRange.getMinY()), nDigits, ePoolUnit, eDlgUnit)); const basegfx::B2DPoint aBottomRight( (double)MetricField::ConvertValue(basegfx::fround(rRange.getMaxX()), nDigits, ePoolUnit, eDlgUnit), (double)MetricField::ConvertValue(basegfx::fround(rRange.getMaxY()), nDigits, ePoolUnit, eDlgUnit)); rRange = basegfx::B2DRange(aTopLeft, aBottomRight); } void lcl_ScaleRect(basegfx::B2DRange& rRange, const Fraction aUIScale) { const double fFactor(1.0 / double(aUIScale)); rRange = basegfx::B2DRange(rRange.getMinimum() * fFactor, rRange.getMaximum() * fFactor); } /************************************************************************* |* |* Konstruktor des Tab-Dialogs: Fuegt die Seiten zum Dialog hinzu |* \************************************************************************/ SvxTransformTabDialog::SvxTransformTabDialog( Window* pParent, const SfxItemSet* pAttr, const SdrView* pSdrView, sal_uInt16 nAnchorTypes ) : SfxTabDialog( pParent, CUI_RES( RID_SVXDLG_TRANSFORM ), pAttr ), pView ( pSdrView ), nAnchorCtrls(nAnchorTypes) { DBG_ASSERT(pView, "no valid view (!)"); FreeResource(); //different positioning page in Writer if(nAnchorCtrls & 0x00ff) { AddTabPage(RID_SVXPAGE_SWPOSSIZE, SvxSwPosSizeTabPage::Create, SvxSwPosSizeTabPage::GetRanges); RemoveTabPage(RID_SVXPAGE_POSITION_SIZE); } else { AddTabPage(RID_SVXPAGE_POSITION_SIZE, SvxPositionSizeTabPage::Create, SvxPositionSizeTabPage::GetRanges); RemoveTabPage(RID_SVXPAGE_SWPOSSIZE); } AddTabPage(RID_SVXPAGE_ANGLE, SvxAngleTabPage::Create, SvxAngleTabPage::GetRanges); AddTabPage(RID_SVXPAGE_SLANT, SvxSlantTabPage::Create, SvxSlantTabPage::GetRanges); } // ----------------------------------------------------------------------- SvxTransformTabDialog::~SvxTransformTabDialog() { } // ----------------------------------------------------------------------- void SvxTransformTabDialog::PageCreated(sal_uInt16 nId, SfxTabPage &rPage) { switch(nId) { case RID_SVXPAGE_POSITION_SIZE: { SvxPositionSizeTabPage& rSvxPos = static_cast(rPage); rSvxPos.SetView(pView); rSvxPos.Construct(); if(nAnchorCtrls & SVX_OBJ_NORESIZE) { rSvxPos.DisableResize(); } if(nAnchorCtrls & SVX_OBJ_NOPROTECT) { rSvxPos.DisableProtect(); rSvxPos.UpdateControlStates(); } break; } case RID_SVXPAGE_SWPOSSIZE : { SvxSwPosSizeTabPage& rSwPos = static_cast(rPage); rSwPos.EnableAnchorTypes(nAnchorCtrls); rSwPos.SetValidateFramePosLink(aValidateLink); rSwPos.SetView(pView); break; } case RID_SVXPAGE_ANGLE: { SvxAngleTabPage& rSvxAng = static_cast(rPage); rSvxAng.SetView( pView ); rSvxAng.Construct(); break; } case RID_SVXPAGE_SLANT: { SvxSlantTabPage& rSvxSlnt = static_cast(rPage); rSvxSlnt.SetView( pView ); rSvxSlnt.Construct(); break; } } } // ----------------------------------------------------------------------- void SvxTransformTabDialog::SetValidateFramePosLink(const Link& rLink) { aValidateLink = rLink; } /************************************************************************* |* |* Dialog zum Aendern der Position des Drehwinkels und des Drehwinkels |* der Grafikobjekte |* \************************************************************************/ SvxAngleTabPage::SvxAngleTabPage( Window* pParent, const SfxItemSet& rInAttrs ) : SvxTabPage ( pParent, CUI_RES( RID_SVXPAGE_ANGLE ), rInAttrs ), aFlPosition ( this, CUI_RES( FL_POSITION ) ), aFtPosX ( this, CUI_RES( FT_POS_X ) ), aMtrPosX ( this, CUI_RES( MTR_FLD_POS_X ) ), aFtPosY ( this, CUI_RES( FT_POS_Y ) ), aMtrPosY ( this, CUI_RES( MTR_FLD_POS_Y ) ), aFtPosPresets ( this, CUI_RES(FT_POSPRESETS) ), aCtlRect ( this, CUI_RES( CTL_RECT ) ), aFlAngle ( this, CUI_RES( FL_ANGLE ) ), aFtAngle ( this, CUI_RES( FT_ANGLE ) ), aMtrAngle ( this, CUI_RES( MTR_FLD_ANGLE ) ), aFtAnglePresets ( this, CUI_RES(FT_ANGLEPRESETS) ), aCtlAngle ( this, CUI_RES( CTL_ANGLE ), RP_RB, 200, 80, CS_ANGLE ), rOutAttrs ( rInAttrs ) { FreeResource(); // calculate PoolUnit SfxItemPool* pPool = rOutAttrs.GetPool(); DBG_ASSERT( pPool, "no pool (!)" ); ePoolUnit = pPool->GetMetric(SID_ATTR_TRANSFORM_POS_X); aMtrAngle.SetModifyHdl(LINK( this, SvxAngleTabPage, ModifiedHdl)); aCtlRect.SetAccessibleRelationLabeledBy(&aFtPosPresets); aCtlRect.SetAccessibleRelationMemberOf(&aFlPosition); aCtlAngle.SetAccessibleRelationLabeledBy(&aFtAnglePresets); aCtlAngle.SetAccessibleRelationMemberOf(&aFlAngle); } // ----------------------------------------------------------------------- void SvxAngleTabPage::Construct() { DBG_ASSERT(pView, "No valid view (!)"); eDlgUnit = GetModuleFieldUnit(GetItemSet()); SetFieldUnit(aMtrPosX, eDlgUnit, sal_True); SetFieldUnit(aMtrPosY, eDlgUnit, sal_True); if(FUNIT_MILE == eDlgUnit || FUNIT_KM == eDlgUnit) { aMtrPosX.SetDecimalDigits( 3 ); aMtrPosY.SetDecimalDigits( 3 ); } { // #i75273# Rectangle aTempRect(pView->GetAllMarkedRect()); pView->GetSdrPageView()->LogicToPagePos(aTempRect); maRange = basegfx::B2DRange(aTempRect.Left(), aTempRect.Top(), aTempRect.Right(), aTempRect.Bottom()); } // Take anchor into account (Writer) const SdrMarkList& rMarkList = pView->GetMarkedObjectList(); if(rMarkList.GetMarkCount()) { const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj(); maAnchor = basegfx::B2DPoint(pObj->GetAnchorPos().X(), pObj->GetAnchorPos().Y()); if(!maAnchor.equalZero()) // -> Writer { maRange = basegfx::B2DRange(maRange.getMinimum() - maAnchor, maRange.getMaximum() - maAnchor); } } // take scale into account const Fraction aUIScale(pView->GetModel()->GetUIScale()); lcl_ScaleRect(maRange, aUIScale); // take UI units into account sal_uInt16 nDigits(aMtrPosX.GetDecimalDigits()); lcl_ConvertRect(maRange, nDigits, (MapUnit)ePoolUnit, eDlgUnit); if(!pView->IsRotateAllowed()) { aFlPosition.Disable(); aFtPosX.Disable(); aMtrPosX.Disable(); aFtPosY.Disable(); aMtrPosY.Disable(); aFtPosPresets.Disable(); aCtlRect.Disable(); aFlAngle.Disable(); aFtAngle.Disable(); aMtrAngle.Disable(); aFtAnglePresets.Disable(); aCtlAngle.Disable(); } } // ----------------------------------------------------------------------- sal_Bool SvxAngleTabPage::FillItemSet(SfxItemSet& rSet) { sal_Bool bModified = sal_False; if(aMtrAngle.IsValueModified() || aMtrPosX.IsValueModified() || aMtrPosY.IsValueModified()) { const double fUIScale(double(pView->GetModel()->GetUIScale())); const double fTmpX((GetCoreValue(aMtrPosX, ePoolUnit) + maAnchor.getX()) * fUIScale); const double fTmpY((GetCoreValue(aMtrPosY, ePoolUnit) + maAnchor.getY()) * fUIScale); rSet.Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_ANGLE), static_cast(aMtrAngle.GetValue()))); rSet.Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_ROT_X), basegfx::fround(fTmpX))); rSet.Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_ROT_Y), basegfx::fround(fTmpY))); bModified |= sal_True; } return bModified; } // ----------------------------------------------------------------------- void SvxAngleTabPage::Reset(const SfxItemSet& rAttrs) { const double fUIScale(double(pView->GetModel()->GetUIScale())); const SfxPoolItem* pItem = GetItem( rAttrs, SID_ATTR_TRANSFORM_ROT_X ); if(pItem) { const double fTmp(((double)((const SfxInt32Item*)pItem)->GetValue() - maAnchor.getX()) / fUIScale); SetMetricValue(aMtrPosX, basegfx::fround(fTmp), ePoolUnit); } else { aMtrPosX.SetText( String() ); } pItem = GetItem(rAttrs, SID_ATTR_TRANSFORM_ROT_Y); if(pItem) { const double fTmp(((double)((const SfxInt32Item*)pItem)->GetValue() - maAnchor.getY()) / fUIScale); SetMetricValue(aMtrPosY, basegfx::fround(fTmp), ePoolUnit); } else { aMtrPosX.SetText( String() ); } pItem = GetItem( rAttrs, SID_ATTR_TRANSFORM_ANGLE ); if(pItem) { aMtrAngle.SetValue(((const SfxInt32Item*)pItem)->GetValue()); } else { aMtrAngle.SetText( String() ); } aMtrAngle.SaveValue(); ModifiedHdl(this); } // ----------------------------------------------------------------------- SfxTabPage* SvxAngleTabPage::Create( Window* pWindow, const SfxItemSet& rSet) { return(new SvxAngleTabPage(pWindow, rSet)); } //------------------------------------------------------------------------ sal_uInt16* SvxAngleTabPage::GetRanges() { return(pAngleRanges); } // ----------------------------------------------------------------------- void SvxAngleTabPage::ActivatePage(const SfxItemSet& /*rSet*/) { } // ----------------------------------------------------------------------- int SvxAngleTabPage::DeactivatePage( SfxItemSet* _pSet ) { if(_pSet) { FillItemSet(*_pSet); } return LEAVE_PAGE; } //------------------------------------------------------------------------ void SvxAngleTabPage::PointChanged(Window* pWindow, RECT_POINT eRP) { if(pWindow == &aCtlRect) { switch(eRP) { case RP_LT: { aMtrPosX.SetUserValue( basegfx::fround64(maRange.getMinX()), FUNIT_NONE ); aMtrPosY.SetUserValue( basegfx::fround64(maRange.getMinY()), FUNIT_NONE ); break; } case RP_MT: { aMtrPosX.SetUserValue( basegfx::fround64(maRange.getCenter().getX()), FUNIT_NONE ); aMtrPosY.SetUserValue( basegfx::fround64(maRange.getMinY()), FUNIT_NONE ); break; } case RP_RT: { aMtrPosX.SetUserValue( basegfx::fround64(maRange.getMaxX()), FUNIT_NONE ); aMtrPosY.SetUserValue( basegfx::fround64(maRange.getMinY()), FUNIT_NONE ); break; } case RP_LM: { aMtrPosX.SetUserValue( basegfx::fround64(maRange.getMinX()), FUNIT_NONE ); aMtrPosY.SetUserValue( basegfx::fround64(maRange.getCenter().getY()), FUNIT_NONE ); break; } case RP_MM: { aMtrPosX.SetUserValue( basegfx::fround64(maRange.getCenter().getX()), FUNIT_NONE ); aMtrPosY.SetUserValue( basegfx::fround64(maRange.getCenter().getY()), FUNIT_NONE ); break; } case RP_RM: { aMtrPosX.SetUserValue( basegfx::fround64(maRange.getMaxX()), FUNIT_NONE ); aMtrPosY.SetUserValue( basegfx::fround64(maRange.getCenter().getY()), FUNIT_NONE ); break; } case RP_LB: { aMtrPosX.SetUserValue( basegfx::fround64(maRange.getMinX()), FUNIT_NONE ); aMtrPosY.SetUserValue( basegfx::fround64(maRange.getMaxY()), FUNIT_NONE ); break; } case RP_MB: { aMtrPosX.SetUserValue( basegfx::fround64(maRange.getCenter().getX()), FUNIT_NONE ); aMtrPosY.SetUserValue( basegfx::fround64(maRange.getMaxY()), FUNIT_NONE ); break; } case RP_RB: { aMtrPosX.SetUserValue( basegfx::fround64(maRange.getMaxX()), FUNIT_NONE ); aMtrPosY.SetUserValue( basegfx::fround64(maRange.getMaxY()), FUNIT_NONE ); break; } } } else if(pWindow == &aCtlAngle) { switch( eRP ) { case RP_LT: aMtrAngle.SetUserValue( 13500, FUNIT_NONE ); break; case RP_MT: aMtrAngle.SetUserValue( 9000, FUNIT_NONE ); break; case RP_RT: aMtrAngle.SetUserValue( 4500, FUNIT_NONE ); break; case RP_LM: aMtrAngle.SetUserValue( 18000, FUNIT_NONE ); break; case RP_RM: aMtrAngle.SetUserValue( 0, FUNIT_NONE ); break; case RP_LB: aMtrAngle.SetUserValue( 22500, FUNIT_NONE ); break; case RP_MB: aMtrAngle.SetUserValue( 27000, FUNIT_NONE ); break; case RP_RB: aMtrAngle.SetUserValue( 31500, FUNIT_NONE ); break; case RP_MM: break; } } } //------------------------------------------------------------------------ IMPL_LINK( SvxAngleTabPage, ModifiedHdl, void *, EMPTYARG ) { switch(aMtrAngle.GetValue()) { case 13500: aCtlAngle.SetActualRP( RP_LT ); break; case 9000: aCtlAngle.SetActualRP( RP_MT ); break; case 4500: aCtlAngle.SetActualRP( RP_RT ); break; case 18000: aCtlAngle.SetActualRP( RP_LM ); break; case 0: aCtlAngle.SetActualRP( RP_RM ); break; case 22500: aCtlAngle.SetActualRP( RP_LB ); break; case 27000: aCtlAngle.SetActualRP( RP_MB ); break; case 31500: aCtlAngle.SetActualRP( RP_RB ); break; default: aCtlAngle.SetActualRP( RP_MM ); break; } return( 0L ); } /************************************************************************* |* |* Dialog zum Aendern des Eckenradius und zum Schraegstellen |* \************************************************************************/ SvxSlantTabPage::SvxSlantTabPage( Window* pParent, const SfxItemSet& rInAttrs ) : SvxTabPage ( pParent, CUI_RES( RID_SVXPAGE_SLANT ), rInAttrs ), aFlRadius ( this, CUI_RES( FL_RADIUS ) ), aFtRadius ( this, CUI_RES( FT_RADIUS ) ), aMtrRadius ( this, CUI_RES( MTR_FLD_RADIUS ) ), aFlAngle ( this, CUI_RES( FL_SLANT ) ), aFtAngle ( this, CUI_RES( FT_ANGLE ) ), aMtrAngle ( this, CUI_RES( MTR_FLD_ANGLE ) ), rOutAttrs ( rInAttrs ) { FreeResource(); // this page needs ExchangeSupport SetExchangeSupport(); // evaluate PoolUnit SfxItemPool* pPool = rOutAttrs.GetPool(); DBG_ASSERT( pPool, "no pool (!)" ); ePoolUnit = pPool->GetMetric( SID_ATTR_TRANSFORM_POS_X ); } // ----------------------------------------------------------------------- void SvxSlantTabPage::Construct() { // get the range DBG_ASSERT(pView, "no valid view (!)"); eDlgUnit = GetModuleFieldUnit(GetItemSet()); SetFieldUnit(aMtrRadius, eDlgUnit, sal_True); { // #i75273# Rectangle aTempRect(pView->GetAllMarkedRect()); pView->GetSdrPageView()->LogicToPagePos(aTempRect); maRange = basegfx::B2DRange(aTempRect.Left(), aTempRect.Top(), aTempRect.Right(), aTempRect.Bottom()); } } // ----------------------------------------------------------------------- sal_Bool SvxSlantTabPage::FillItemSet(SfxItemSet& rAttrs) { sal_Bool bModified = sal_False; sal_Int32 nValue = 0L; String aStr = aMtrRadius.GetText(); if( aStr != aMtrRadius.GetSavedValue() ) { Fraction aUIScale = pView->GetModel()->GetUIScale(); long nTmp = GetCoreValue( aMtrRadius, ePoolUnit ); nTmp = Fraction( nTmp ) * aUIScale; rAttrs.Put( SdrEckenradiusItem( nTmp ) ); bModified = sal_True; } aStr = aMtrAngle.GetText(); if( aStr != aMtrAngle.GetSavedValue() ) { nValue = static_cast(aMtrAngle.GetValue()); rAttrs.Put( SfxInt32Item( SID_ATTR_TRANSFORM_SHEAR, nValue ) ); bModified = sal_True; } if( bModified ) { // Referenzpunkt setzen // #75897# Rectangle aObjectRect(pView->GetAllMarkedRect()); pView->GetSdrPageView()->LogicToPagePos(aObjectRect); Point aPt = aObjectRect.Center(); rAttrs.Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR_X, aPt.X())); rAttrs.Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR_Y, aPt.Y())); rAttrs.Put( SfxBoolItem( SID_ATTR_TRANSFORM_SHEAR_VERTICAL, sal_False ) ); } return( bModified ); } // ----------------------------------------------------------------------- void SvxSlantTabPage::Reset(const SfxItemSet& rAttrs) { // if the view has selected objects, items with SFX_ITEM_DEFAULT need to be disabled const SfxPoolItem* pItem; // Eckenradius if(!pView->IsEdgeRadiusAllowed()) { aFlRadius.Disable(); aFtRadius.Disable(); aMtrRadius.Disable(); aMtrRadius.SetText( String() ); } else { pItem = GetItem( rAttrs, SDRATTR_ECKENRADIUS ); if( pItem ) { const double fUIScale(double(pView->GetModel()->GetUIScale())); const double fTmp((double)((const SdrEckenradiusItem*)pItem)->GetValue() / fUIScale); SetMetricValue(aMtrRadius, basegfx::fround(fTmp), ePoolUnit); } else { aMtrRadius.SetText( String() ); } } aMtrRadius.SaveValue(); // Schraegstellen: Winkel if( !pView->IsShearAllowed() ) { aFlAngle.Disable(); aFtAngle.Disable(); aMtrAngle.Disable(); aMtrAngle.SetText( String() ); } else { pItem = GetItem( rAttrs, SID_ATTR_TRANSFORM_SHEAR ); if( pItem ) { aMtrAngle.SetValue( ( (const SfxInt32Item*)pItem )->GetValue() ); } else { aMtrAngle.SetText( String() ); } } aMtrAngle.SaveValue(); } // ----------------------------------------------------------------------- SfxTabPage* SvxSlantTabPage::Create( Window* pWindow, const SfxItemSet& rOutAttrs ) { return( new SvxSlantTabPage( pWindow, rOutAttrs ) ); } //------------------------------------------------------------------------ sal_uInt16* SvxSlantTabPage::GetRanges() { return( pSlantRanges ); } // ----------------------------------------------------------------------- void SvxSlantTabPage::ActivatePage( const SfxItemSet& rSet ) { SfxRectangleItem* pRectItem = NULL; if( SFX_ITEM_SET == rSet.GetItemState( GetWhich( SID_ATTR_TRANSFORM_INTERN ) , sal_False, (const SfxPoolItem**) &pRectItem ) ) { const Rectangle aTempRect(pRectItem->GetValue()); maRange = basegfx::B2DRange(aTempRect.Left(), aTempRect.Top(), aTempRect.Right(), aTempRect.Bottom()); } } // ----------------------------------------------------------------------- int SvxSlantTabPage::DeactivatePage( SfxItemSet* _pSet ) { if(_pSet) { FillItemSet(*_pSet); } return LEAVE_PAGE; } //------------------------------------------------------------------------ void SvxSlantTabPage::PointChanged( Window* , RECT_POINT ) { } /************************************************************************* |* |* Dialog for changing position and size of graphic objects |* \************************************************************************/ SvxPositionSizeTabPage::SvxPositionSizeTabPage( Window* pParent, const SfxItemSet& rInAttrs ) : SvxTabPage ( pParent, CUI_RES( RID_SVXPAGE_POSITION_SIZE ), rInAttrs ), maFlPosition ( this, CUI_RES( FL_POSITION ) ), maFtPosX ( this, CUI_RES( FT_POS_X ) ), maMtrPosX ( this, CUI_RES( MTR_FLD_POS_X ) ), maFtPosY ( this, CUI_RES( FT_POS_Y ) ), maMtrPosY ( this, CUI_RES( MTR_FLD_POS_Y ) ), maFtPosReference ( this, CUI_RES( FT_POSREFERENCE ) ), maCtlPos ( this, CUI_RES( CTL_POSRECT ), RP_LT ), maFlSize ( this, CUI_RES( FL_SIZE ) ), maFtWidth ( this, CUI_RES( FT_WIDTH ) ), maMtrWidth ( this, CUI_RES( MTR_FLD_WIDTH ) ), maFtHeight ( this, CUI_RES( FT_HEIGHT ) ), maMtrHeight ( this, CUI_RES( MTR_FLD_HEIGHT ) ), maCbxScale ( this, CUI_RES( CBX_SCALE ) ), maFtSizeReference ( this, CUI_RES( FT_SIZEREFERENCE) ), maCtlSize ( this, CUI_RES( CTL_SIZERECT ), RP_LT ), maFlProtect ( this, CUI_RES( FL_PROTECT) ), maTsbPosProtect ( this, CUI_RES( TSB_POSPROTECT ) ), maTsbSizeProtect ( this, CUI_RES( TSB_SIZEPROTECT ) ), maFlAdjust ( this, CUI_RES( FL_ADJUST ) ), maTsbAutoGrowWidth ( this, CUI_RES( TSB_AUTOGROW_WIDTH ) ), maTsbAutoGrowHeight ( this, CUI_RES( TSB_AUTOGROW_HEIGHT ) ), maFlDivider (this, CUI_RES( FL_DIVIDER ) ), mrOutAttrs ( rInAttrs ), mnProtectSizeState( STATE_NOCHECK ), mbPageDisabled ( sal_False ), mbProtectDisabled( false ), mbSizeDisabled( false ), mbAdjustDisabled( true ) { FreeResource(); // this pege needs ExchangeSupport SetExchangeSupport(); // evaluate PoolUnit SfxItemPool* pPool = mrOutAttrs.GetPool(); DBG_ASSERT( pPool, "no pool (!)" ); mePoolUnit = pPool->GetMetric( SID_ATTR_TRANSFORM_POS_X ); meRP = RP_LT; // s.o. maMtrWidth.SetModifyHdl( LINK( this, SvxPositionSizeTabPage, ChangeWidthHdl ) ); maMtrHeight.SetModifyHdl( LINK( this, SvxPositionSizeTabPage, ChangeHeightHdl ) ); maCbxScale.SetClickHdl( LINK( this, SvxPositionSizeTabPage, ClickAutoHdl ) ); maTsbAutoGrowWidth.Disable(); maTsbAutoGrowHeight.Disable(); maFlAdjust.Disable(); // #i2379# disable controls when protected maTsbPosProtect.SetClickHdl( LINK( this, SvxPositionSizeTabPage, ChangePosProtectHdl ) ); maTsbSizeProtect.SetClickHdl( LINK( this, SvxPositionSizeTabPage, ChangeSizeProtectHdl ) ); maCtlPos.SetAccessibleRelationMemberOf( &maFlPosition ); maCtlSize.SetAccessibleRelationMemberOf( &maFlSize ); maCtlPos.SetAccessibleRelationLabeledBy( &maFtPosReference ); maCtlSize.SetAccessibleRelationLabeledBy( &maFtSizeReference ); } // ----------------------------------------------------------------------- void SvxPositionSizeTabPage::Construct() { // get range and work area DBG_ASSERT( mpView, "no valid view (!)" ); meDlgUnit = GetModuleFieldUnit( GetItemSet() ); SetFieldUnit( maMtrPosX, meDlgUnit, sal_True ); SetFieldUnit( maMtrPosY, meDlgUnit, sal_True ); SetFieldUnit( maMtrWidth, meDlgUnit, sal_True ); SetFieldUnit( maMtrHeight, meDlgUnit, sal_True ); if(FUNIT_MILE == meDlgUnit || FUNIT_KM == meDlgUnit) { maMtrPosX.SetDecimalDigits( 3 ); maMtrPosY.SetDecimalDigits( 3 ); maMtrWidth.SetDecimalDigits( 3 ); maMtrHeight.SetDecimalDigits( 3 ); } { // #i75273# Rectangle aTempRect(mpView->GetAllMarkedRect()); mpView->GetSdrPageView()->LogicToPagePos(aTempRect); maRange = basegfx::B2DRange(aTempRect.Left(), aTempRect.Top(), aTempRect.Right(), aTempRect.Bottom()); } { // #i75273# Rectangle aTempRect(mpView->GetWorkArea()); mpView->GetSdrPageView()->LogicToPagePos(aTempRect); maWorkRange = basegfx::B2DRange(aTempRect.Left(), aTempRect.Top(), aTempRect.Right(), aTempRect.Bottom()); } // take anchor into account (Writer) const SdrMarkList& rMarkList = mpView->GetMarkedObjectList(); if(rMarkList.GetMarkCount()) { const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj(); maAnchor = basegfx::B2DPoint(pObj->GetAnchorPos().X(), pObj->GetAnchorPos().Y()); if(!maAnchor.equalZero()) // -> Writer { for(sal_uInt16 i(1); i < rMarkList.GetMarkCount(); i++) { pObj = rMarkList.GetMark(i)->GetMarkedSdrObj(); if(maAnchor != basegfx::B2DPoint(pObj->GetAnchorPos().X(), pObj->GetAnchorPos().Y())) { // diferent anchor positions maMtrPosX.SetText( String() ); maMtrPosY.SetText( String() ); mbPageDisabled = sal_True; return; } } // translate ranges about anchor maRange = basegfx::B2DRange(maRange.getMinimum() - maAnchor, maRange.getMaximum() - maAnchor); maWorkRange = basegfx::B2DRange(maWorkRange.getMinimum() - maAnchor, maWorkRange.getMaximum() - maAnchor); } } // this should happen via SID_ATTR_TRANSFORM_AUTOSIZE if(1 == rMarkList.GetMarkCount()) { const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj(); const SdrObjKind eKind((SdrObjKind)pObj->GetObjIdentifier()); if((pObj->GetObjInventor() == SdrInventor) && (OBJ_TEXT == eKind || OBJ_TITLETEXT == eKind || OBJ_OUTLINETEXT == eKind) && // #121917# The original ((SdrTextObj*)pObj)->HasText() will fail badly with SdrVirtObjs from Writer 0 != dynamic_cast< const SdrTextObj* >(pObj) && static_cast< const SdrTextObj* >(pObj)->HasText()) { mbAdjustDisabled = false; maFlAdjust.Enable(); maTsbAutoGrowWidth.Enable(); maTsbAutoGrowHeight.Enable(); maTsbAutoGrowWidth.SetClickHdl( LINK( this, SvxPositionSizeTabPage, ClickSizeProtectHdl ) ); maTsbAutoGrowHeight.SetClickHdl( LINK( this, SvxPositionSizeTabPage, ClickSizeProtectHdl ) ); // is used as flag to evaluate if its selectable maTsbAutoGrowWidth.EnableTriState( sal_False ); maTsbAutoGrowHeight.EnableTriState( sal_False ); } } // take scale into account const Fraction aUIScale(mpView->GetModel()->GetUIScale()); lcl_ScaleRect( maWorkRange, aUIScale ); lcl_ScaleRect( maRange, aUIScale ); // take UI units into account const sal_uInt16 nDigits(maMtrPosX.GetDecimalDigits()); lcl_ConvertRect( maWorkRange, nDigits, (MapUnit) mePoolUnit, meDlgUnit ); lcl_ConvertRect( maRange, nDigits, (MapUnit) mePoolUnit, meDlgUnit ); SetMinMaxPosition(); } // ----------------------------------------------------------------------- sal_Bool SvxPositionSizeTabPage::FillItemSet( SfxItemSet& rOutAttrs ) { sal_Bool bModified(sal_False); if ( maMtrWidth.HasFocus() ) { ChangeWidthHdl( this ); } if ( maMtrHeight.HasFocus() ) { ChangeHeightHdl( this ); } if( !mbPageDisabled ) { if ( maMtrPosX.IsValueModified() || maMtrPosY.IsValueModified() ) { const double fUIScale(double(mpView->GetModel()->GetUIScale())); double fX((GetCoreValue( maMtrPosX, mePoolUnit ) + maAnchor.getX()) * fUIScale); double fY((GetCoreValue( maMtrPosY, mePoolUnit ) + maAnchor.getY()) * fUIScale); { // #i75273# Rectangle aTempRect(mpView->GetAllMarkedRect()); mpView->GetSdrPageView()->LogicToPagePos(aTempRect); maRange = basegfx::B2DRange(aTempRect.Left(), aTempRect.Top(), aTempRect.Right(), aTempRect.Bottom()); } // #101581# GetTopLeftPosition(...) needs coordinates after UI scaling, in real PagePositions GetTopLeftPosition(fX, fY, maRange); rOutAttrs.Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_POS_X), basegfx::fround(fX))); rOutAttrs.Put(SfxInt32Item(GetWhich(SID_ATTR_TRANSFORM_POS_Y), basegfx::fround(fY))); bModified |= sal_True; } if ( maTsbPosProtect.GetState() != maTsbPosProtect.GetSavedValue() ) { if( maTsbPosProtect.GetState() == STATE_DONTKNOW ) { rOutAttrs.InvalidateItem( SID_ATTR_TRANSFORM_PROTECT_POS ); } else { rOutAttrs.Put( SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_PROTECT_POS ), maTsbPosProtect.GetState() == STATE_CHECK ? sal_True : sal_False ) ); } bModified |= sal_True; } } if ( maMtrWidth.IsValueModified() || maMtrHeight.IsValueModified() ) { Fraction aUIScale = mpView->GetModel()->GetUIScale(); // get Width double nWidth = static_cast(maMtrWidth.GetValue( meDlgUnit )); nWidth = MetricField::ConvertDoubleValue( nWidth, maMtrWidth.GetBaseValue(), maMtrWidth.GetDecimalDigits(), meDlgUnit, FUNIT_100TH_MM ); long lWidth = long(nWidth * (double)aUIScale); lWidth = OutputDevice::LogicToLogic( lWidth, MAP_100TH_MM, (MapUnit)mePoolUnit ); lWidth = static_cast(maMtrWidth.Denormalize( lWidth )); // get Height double nHeight = static_cast(maMtrHeight.GetValue( meDlgUnit )); nHeight = MetricField::ConvertDoubleValue( nHeight, maMtrHeight.GetBaseValue(), maMtrHeight.GetDecimalDigits(), meDlgUnit, FUNIT_100TH_MM ); long lHeight = long(nHeight * (double)aUIScale); lHeight = OutputDevice::LogicToLogic( lHeight, MAP_100TH_MM, (MapUnit)mePoolUnit ); lHeight = static_cast(maMtrWidth.Denormalize( lHeight )); // put Width & Height to itemset rOutAttrs.Put( SfxUInt32Item( GetWhich( SID_ATTR_TRANSFORM_WIDTH ), (sal_uInt32) lWidth ) ); rOutAttrs.Put( SfxUInt32Item( GetWhich( SID_ATTR_TRANSFORM_HEIGHT ), (sal_uInt32) lHeight ) ); rOutAttrs.Put( SfxAllEnumItem( GetWhich( SID_ATTR_TRANSFORM_SIZE_POINT ), sal::static_int_cast< sal_uInt16 >( meRP ) ) ); bModified |= sal_True; } if ( maTsbSizeProtect.GetState() != maTsbSizeProtect.GetSavedValue() ) { if ( maTsbSizeProtect.GetState() == STATE_DONTKNOW ) rOutAttrs.InvalidateItem( SID_ATTR_TRANSFORM_PROTECT_SIZE ); else rOutAttrs.Put( SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_PROTECT_SIZE ), maTsbSizeProtect.GetState() == STATE_CHECK ? sal_True : sal_False ) ); bModified |= sal_True; } if ( maTsbAutoGrowWidth.GetState() != maTsbAutoGrowWidth.GetSavedValue() ) { if ( !maTsbAutoGrowWidth.IsTriStateEnabled() ) { if( maTsbAutoGrowWidth.GetState() == STATE_DONTKNOW ) rOutAttrs.InvalidateItem( SID_ATTR_TRANSFORM_AUTOWIDTH ); else rOutAttrs.Put( SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_AUTOWIDTH ), maTsbAutoGrowWidth.GetState() == STATE_CHECK ? sal_True : sal_False ) ); } bModified |= sal_True; } if ( maTsbAutoGrowHeight.GetState() != maTsbAutoGrowHeight.GetSavedValue() ) { if ( !maTsbAutoGrowHeight.IsTriStateEnabled() ) { if( maTsbAutoGrowHeight.GetState() == STATE_DONTKNOW ) rOutAttrs.InvalidateItem( SID_ATTR_TRANSFORM_AUTOHEIGHT ); else rOutAttrs.Put( SfxBoolItem( GetWhich( SID_ATTR_TRANSFORM_AUTOHEIGHT ), maTsbAutoGrowHeight.GetState() == STATE_CHECK ? sal_True : sal_False ) ); } bModified |= sal_True; } return bModified; } // ----------------------------------------------------------------------- void SvxPositionSizeTabPage::Reset( const SfxItemSet& ) { const SfxPoolItem* pItem; const double fUIScale(double(mpView->GetModel()->GetUIScale())); if ( !mbPageDisabled ) { pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_POS_X ); if ( pItem ) { const double fTmp((((const SfxInt32Item*)pItem)->GetValue() - maAnchor.getX()) / fUIScale); SetMetricValue(maMtrPosX, basegfx::fround(fTmp), mePoolUnit); } pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_POS_Y ); if ( pItem ) { const double fTmp((((const SfxInt32Item*)pItem)->GetValue() - maAnchor.getY()) / fUIScale); SetMetricValue(maMtrPosY, basegfx::fround(fTmp), mePoolUnit); } pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_PROTECT_POS ); if ( pItem ) { sal_Bool bProtected = ( ( const SfxBoolItem* )pItem )->GetValue(); maTsbPosProtect.SetState( bProtected ? STATE_CHECK : STATE_NOCHECK ); maTsbPosProtect.EnableTriState( sal_False ); } else { maTsbPosProtect.SetState( STATE_DONTKNOW ); } maTsbPosProtect.SaveValue(); maCtlPos.Reset(); // #i2379# Disable controls for protected objects ChangePosProtectHdl( this ); } { // #i75273# set width pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_WIDTH ); mfOldWidth = std::max( pItem ? (double)((const SfxUInt32Item*)pItem)->GetValue() : 0.0, 1.0 ); double fTmpWidth((OutputDevice::LogicToLogic(static_cast(mfOldWidth), (MapUnit)mePoolUnit, MAP_100TH_MM)) / fUIScale); if(maMtrWidth.GetDecimalDigits()) fTmpWidth *= pow(10.0, maMtrWidth.GetDecimalDigits()); fTmpWidth = MetricField::ConvertDoubleValue(fTmpWidth, maMtrWidth.GetBaseValue(), maMtrWidth.GetDecimalDigits(), FUNIT_100TH_MM, meDlgUnit); maMtrWidth.SetValue(static_cast(fTmpWidth), meDlgUnit); } { // #i75273# set height pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_HEIGHT ); mfOldHeight = std::max( pItem ? (double)((const SfxUInt32Item*)pItem)->GetValue() : 0.0, 1.0 ); double fTmpHeight((OutputDevice::LogicToLogic(static_cast(mfOldHeight), (MapUnit)mePoolUnit, MAP_100TH_MM)) / fUIScale); if(maMtrHeight.GetDecimalDigits()) fTmpHeight *= pow(10.0, maMtrHeight.GetDecimalDigits()); fTmpHeight = MetricField::ConvertDoubleValue(fTmpHeight, maMtrHeight.GetBaseValue(), maMtrHeight.GetDecimalDigits(), FUNIT_100TH_MM, meDlgUnit); maMtrHeight.SetValue(static_cast(fTmpHeight), meDlgUnit); } pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_PROTECT_SIZE ); if ( pItem ) { maTsbSizeProtect.SetState( ( (const SfxBoolItem*)pItem )->GetValue() ? STATE_CHECK : STATE_NOCHECK ); maTsbSizeProtect.EnableTriState( sal_False ); } else maTsbSizeProtect.SetState( STATE_DONTKNOW ); pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_AUTOWIDTH ); if ( pItem ) { maTsbAutoGrowWidth.SetState( ( ( const SfxBoolItem* )pItem )->GetValue() ? STATE_CHECK : STATE_NOCHECK ); } else maTsbAutoGrowWidth.SetState( STATE_DONTKNOW ); pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_AUTOHEIGHT ); if ( pItem ) { maTsbAutoGrowHeight.SetState( ( ( const SfxBoolItem* )pItem )->GetValue() ? STATE_CHECK : STATE_NOCHECK ); } else maTsbAutoGrowHeight.SetState( STATE_DONTKNOW ); // Ist Abgleich gesetzt? String aStr = GetUserData(); maCbxScale.Check( (sal_Bool)aStr.ToInt32() ); maTsbSizeProtect.SaveValue(); maTsbAutoGrowWidth.SaveValue(); maTsbAutoGrowHeight.SaveValue(); ClickSizeProtectHdl( NULL ); // #i2379# Disable controls for protected objects ChangeSizeProtectHdl( this ); } // ----------------------------------------------------------------------- SfxTabPage* SvxPositionSizeTabPage::Create( Window* pWindow, const SfxItemSet& rOutAttrs ) { return( new SvxPositionSizeTabPage( pWindow, rOutAttrs ) ); } //------------------------------------------------------------------------ sal_uInt16* SvxPositionSizeTabPage::GetRanges() { return( pPosSizeRanges ); } // ----------------------------------------------------------------------- void SvxPositionSizeTabPage::ActivatePage( const SfxItemSet& rSet ) { SfxRectangleItem* pRectItem = NULL; if( SFX_ITEM_SET == rSet.GetItemState( GetWhich( SID_ATTR_TRANSFORM_INTERN ) , sal_False, (const SfxPoolItem**) &pRectItem ) ) { { // #i75273# const Rectangle aTempRect(pRectItem->GetValue()); maRange = basegfx::B2DRange(aTempRect.Left(), aTempRect.Top(), aTempRect.Right(), aTempRect.Bottom()); } SetMinMaxPosition(); } } // ----------------------------------------------------------------------- int SvxPositionSizeTabPage::DeactivatePage( SfxItemSet* _pSet ) { if( _pSet ) { double fX((double)maMtrPosX.GetValue()); double fY((double)maMtrPosY.GetValue()); GetTopLeftPosition(fX, fY, maRange); const Rectangle aOutRectangle( basegfx::fround(fX), basegfx::fround(fY), basegfx::fround(fX + maRange.getWidth()), basegfx::fround(fY + maRange.getHeight())); _pSet->Put(SfxRectangleItem(SID_ATTR_TRANSFORM_INTERN, aOutRectangle)); FillItemSet(*_pSet); } return LEAVE_PAGE; } //------------------------------------------------------------------------ IMPL_LINK( SvxPositionSizeTabPage, ChangePosProtectHdl, void *, EMPTYARG ) { // #106572# Remember user's last choice maTsbSizeProtect.SetState( maTsbPosProtect.GetState() == STATE_CHECK ? STATE_CHECK : mnProtectSizeState ); UpdateControlStates(); return( 0L ); } //------------------------------------------------------------------------ void SvxPositionSizeTabPage::UpdateControlStates() { const bool bPosProtect = maTsbPosProtect.GetState() == STATE_CHECK; const bool bSizeProtect = maTsbSizeProtect.GetState() == STATE_CHECK; const bool bHeightChecked = !maTsbAutoGrowHeight.IsTriStateEnabled() && (maTsbAutoGrowHeight.GetState() == STATE_CHECK); const bool bWidthChecked = !maTsbAutoGrowWidth.IsTriStateEnabled() && (maTsbAutoGrowWidth.GetState() == STATE_CHECK); maFlPosition.Enable( !bPosProtect && !mbPageDisabled ); maFtPosX.Enable( !bPosProtect && !mbPageDisabled ); maMtrPosX.Enable( !bPosProtect && !mbPageDisabled ); maFtPosY.Enable( !bPosProtect && !mbPageDisabled ); maMtrPosY.Enable( !bPosProtect && !mbPageDisabled ); maFtPosReference.Enable( !bPosProtect && !mbPageDisabled ); maCtlPos.Enable( !bPosProtect ); maTsbPosProtect.Enable( !mbProtectDisabled && !mbPageDisabled ); maFlSize.Enable( !mbSizeDisabled && !bSizeProtect ); maCtlSize.Enable( !mbSizeDisabled && !bSizeProtect && (!bHeightChecked || !bWidthChecked) ); maFtWidth.Enable( !mbSizeDisabled && !bSizeProtect && !bWidthChecked ); maMtrWidth.Enable( !mbSizeDisabled && !bSizeProtect && !bWidthChecked ); maFtHeight.Enable( !mbSizeDisabled && !bSizeProtect && !bHeightChecked ); maMtrHeight.Enable( !mbSizeDisabled && !bSizeProtect && !bHeightChecked ); maCbxScale.Enable( !mbSizeDisabled && !bSizeProtect && !bHeightChecked && !bWidthChecked ); maFtSizeReference.Enable( !mbSizeDisabled && !bSizeProtect ); maFlProtect.Enable( !mbProtectDisabled ); maTsbSizeProtect.Enable( !mbProtectDisabled && !bPosProtect ); maFlAdjust.Enable( !mbSizeDisabled && !bSizeProtect && !mbAdjustDisabled ); maTsbAutoGrowWidth.Enable( !mbSizeDisabled && !bSizeProtect && !mbAdjustDisabled ); maTsbAutoGrowHeight.Enable( !mbSizeDisabled && !bSizeProtect && !mbAdjustDisabled ); maCtlSize.Invalidate(); maCtlPos.Invalidate(); } //------------------------------------------------------------------------ IMPL_LINK( SvxPositionSizeTabPage, ChangeSizeProtectHdl, void *, EMPTYARG ) { if( maTsbSizeProtect.IsEnabled() ) { // #106572# Remember user's last choice // Note: this works only as long as the dialog is open. When // the user closes the dialog, there is no way to remember // whether size was enabled or disabled befor pos protect was // clicked. Thus, if pos protect is selected, the dialog is // closed and reopened again, unchecking pos protect will // always uncheck size protect, too. That's life. mnProtectSizeState = maTsbSizeProtect.GetState(); } UpdateControlStates(); return( 0L ); } //------------------------------------------------------------------------ IMPL_LINK_INLINE_START( SvxPositionSizeTabPage, ChangePosXHdl, void *, EMPTYARG ) { return( 0L ); } IMPL_LINK_INLINE_END( SvxPositionSizeTabPage, ChangePosXHdl, void *, EMPTYARG ) //------------------------------------------------------------------------ IMPL_LINK_INLINE_START( SvxPositionSizeTabPage, ChangePosYHdl, void *, EMPTYARG ) { return( 0L ); } IMPL_LINK_INLINE_END( SvxPositionSizeTabPage, ChangePosYHdl, void *, EMPTYARG ) //------------------------------------------------------------------------ void SvxPositionSizeTabPage::SetMinMaxPosition() { // position double fLeft(maWorkRange.getMinX()); double fTop(maWorkRange.getMinY()); double fRight(maWorkRange.getMaxX()); double fBottom(maWorkRange.getMaxY()); switch ( maCtlPos.GetActualRP() ) { case RP_LT: { fRight -= maRange.getWidth(); fBottom -= maRange.getHeight(); break; } case RP_MT: { fLeft += maRange.getWidth() / 2.0; fRight -= maRange.getWidth() / 2.0; fBottom -= maRange.getHeight(); break; } case RP_RT: { fLeft += maRange.getWidth(); fBottom -= maRange.getHeight(); break; } case RP_LM: { fRight -= maRange.getWidth(); fTop += maRange.getHeight() / 2.0; fBottom -= maRange.getHeight() / 2.0; break; } case RP_MM: { fLeft += maRange.getWidth() / 2.0; fRight -= maRange.getWidth() / 2.0; fTop += maRange.getHeight() / 2.0; fBottom -= maRange.getHeight() / 2.0; break; } case RP_RM: { fLeft += maRange.getWidth(); fTop += maRange.getHeight() / 2.0; fBottom -= maRange.getHeight() / 2.0; break; } case RP_LB: { fRight -= maRange.getWidth(); fTop += maRange.getHeight(); break; } case RP_MB: { fLeft += maRange.getWidth() / 2.0; fRight -= maRange.getWidth() / 2.0; fTop += maRange.getHeight(); break; } case RP_RB: { fLeft += maRange.getWidth(); fTop += maRange.getHeight(); break; } } const double fMaxLong((double)(MetricField::ConvertValue( LONG_MAX, 0, MAP_100TH_MM, meDlgUnit ) - 1L)); fLeft = (fLeft > fMaxLong) ? fMaxLong : (fLeft < -fMaxLong) ? -fMaxLong : fLeft; fRight = (fRight > fMaxLong) ? fMaxLong : (fRight < -fMaxLong) ? -fMaxLong : fRight; fTop = (fTop > fMaxLong) ? fMaxLong : (fTop < -fMaxLong) ? -fMaxLong : fTop; fBottom = (fBottom > fMaxLong) ? fMaxLong : (fBottom < -fMaxLong) ? -fMaxLong : fBottom; // #i75273# normalizing when setting the min/max values was wrong, removed maMtrPosX.SetMin(basegfx::fround64(fLeft)); maMtrPosX.SetFirst(basegfx::fround64(fLeft)); maMtrPosX.SetMax(basegfx::fround64(fRight)); maMtrPosX.SetLast(basegfx::fround64(fRight)); maMtrPosY.SetMin(basegfx::fround64(fTop)); maMtrPosY.SetFirst(basegfx::fround64(fTop)); maMtrPosY.SetMax(basegfx::fround64(fBottom)); maMtrPosY.SetLast(basegfx::fround64(fBottom)); // size fLeft = maWorkRange.getMinX(); fTop = maWorkRange.getMinY(); fRight = maWorkRange.getMaxX(); fBottom = maWorkRange.getMaxY(); double fNewX(0); double fNewY(0); switch ( maCtlSize.GetActualRP() ) { case RP_LT: { fNewX = maWorkRange.getWidth() - ( maRange.getMinX() - fLeft ); fNewY = maWorkRange.getHeight() - ( maRange.getMinY() - fTop ); break; } case RP_MT: { fNewX = std::min( maRange.getCenter().getX() - fLeft, fRight - maRange.getCenter().getX() ) * 2.0; fNewY = maWorkRange.getHeight() - ( maRange.getMinY() - fTop ); break; } case RP_RT: { fNewX = maWorkRange.getWidth() - ( fRight - maRange.getMaxX() ); fNewY = maWorkRange.getHeight() - ( maRange.getMinY() - fTop ); break; } case RP_LM: { fNewX = maWorkRange.getWidth() - ( maRange.getMinX() - fLeft ); fNewY = std::min( maRange.getCenter().getY() - fTop, fBottom - maRange.getCenter().getY() ) * 2.0; break; } case RP_MM: { const double f1(maRange.getCenter().getX() - fLeft); const double f2(fRight - maRange.getCenter().getX()); const double f3(std::min(f1, f2)); const double f4(maRange.getCenter().getY() - fTop); const double f5(fBottom - maRange.getCenter().getY()); const double f6(std::min(f4, f5)); fNewX = f3 * 2.0; fNewY = f6 * 3.0; break; } case RP_RM: { fNewX = maWorkRange.getWidth() - ( fRight - maRange.getMaxX() ); fNewY = std::min( maRange.getCenter().getY() - fTop, fBottom - maRange.getCenter().getY() ) * 2.0; break; } case RP_LB: { fNewX = maWorkRange.getWidth() - ( maRange.getMinX() - fLeft ); fNewY = maWorkRange.getHeight() - ( fBottom - maRange.getMaxY() ); break; } case RP_MB: { fNewX = std::min( maRange.getCenter().getX() - fLeft, fRight - maRange.getCenter().getX() ) * 2.0; fNewY = maWorkRange.getHeight() - ( maRange.getMaxY() - fBottom ); break; } case RP_RB: { fNewX = maWorkRange.getWidth() - ( fRight - maRange.getMaxX() ); fNewY = maWorkRange.getHeight() - ( fBottom - maRange.getMaxY() ); break; } } // #i75273# normalizing when setting the min/max values was wrong, removed maMtrWidth.SetMax(basegfx::fround64(fNewX)); maMtrWidth.SetLast(basegfx::fround64(fNewX)); maMtrHeight.SetMax(basegfx::fround64(fNewY)); maMtrHeight.SetLast(basegfx::fround64(fNewY)); } //------------------------------------------------------------------------ void SvxPositionSizeTabPage::GetTopLeftPosition(double& rfX, double& rfY, const basegfx::B2DRange& rRange) { switch (maCtlPos.GetActualRP()) { case RP_LT: { break; } case RP_MT: { rfX -= rRange.getCenter().getX() - rRange.getMinX(); break; } case RP_RT: { rfX -= rRange.getWidth(); break; } case RP_LM: { rfY -= rRange.getCenter().getY() - rRange.getMinY(); break; } case RP_MM: { rfX -= rRange.getCenter().getX() - rRange.getMinX(); rfY -= rRange.getCenter().getY() - rRange.getMinY(); break; } case RP_RM: { rfX -= rRange.getWidth(); rfY -= rRange.getCenter().getY() - rRange.getMinY(); break; } case RP_LB: { rfY -= rRange.getHeight(); break; } case RP_MB: { rfX -= rRange.getCenter().getX() - rRange.getMinX(); rfY -= rRange.getHeight(); break; } case RP_RB: { rfX -= rRange.getWidth(); rfY -= rRange.getHeight(); break; } } } //------------------------------------------------------------------------ void SvxPositionSizeTabPage::PointChanged( Window* pWindow, RECT_POINT eRP ) { if( pWindow == &maCtlPos ) { SetMinMaxPosition(); switch( eRP ) { case RP_LT: { maMtrPosX.SetValue( basegfx::fround64(maRange.getMinX()) ); maMtrPosY.SetValue( basegfx::fround64(maRange.getMinY()) ); break; } case RP_MT: { maMtrPosX.SetValue( basegfx::fround64(maRange.getCenter().getX()) ); maMtrPosY.SetValue( basegfx::fround64(maRange.getMinY()) ); break; } case RP_RT: { maMtrPosX.SetValue( basegfx::fround64(maRange.getMaxX()) ); maMtrPosY.SetValue( basegfx::fround64(maRange.getMinY()) ); break; } case RP_LM: { maMtrPosX.SetValue( basegfx::fround64(maRange.getMinX()) ); maMtrPosY.SetValue( basegfx::fround64(maRange.getCenter().getY()) ); break; } case RP_MM: { maMtrPosX.SetValue( basegfx::fround64(maRange.getCenter().getX()) ); maMtrPosY.SetValue( basegfx::fround64(maRange.getCenter().getY()) ); break; } case RP_RM: { maMtrPosX.SetValue( basegfx::fround64(maRange.getMaxX()) ); maMtrPosY.SetValue( basegfx::fround64(maRange.getCenter().getY()) ); break; } case RP_LB: { maMtrPosX.SetValue( basegfx::fround64(maRange.getMinX()) ); maMtrPosY.SetValue( basegfx::fround64(maRange.getMaxY()) ); break; } case RP_MB: { maMtrPosX.SetValue( basegfx::fround64(maRange.getCenter().getX()) ); maMtrPosY.SetValue( basegfx::fround64(maRange.getMaxY()) ); break; } case RP_RB: { maMtrPosX.SetValue( basegfx::fround64(maRange.getMaxX()) ); maMtrPosY.SetValue( basegfx::fround64(maRange.getMaxY()) ); break; } } } else { meRP = eRP; Rectangle aTmpRect( GetRect() ); SetMinMaxPosition(); } } //------------------------------------------------------------------------ void SvxPositionSizeTabPage::DisableResize() { mbSizeDisabled = true; } //------------------------------------------------------------------------ void SvxPositionSizeTabPage::DisableProtect() { mbProtectDisabled = true; } //------------------------------------------------------------------------ Rectangle SvxPositionSizeTabPage::GetRect() { double fLeft(maRange.getMinX()); double fTop(maRange.getMinY()); double fRight(fLeft + (double)maMtrWidth.GetValue()); double fBottom(fTop + (double)maMtrHeight.GetValue()); switch ( maCtlSize.GetActualRP() ) { case RP_LT: { break; } case RP_MT: { fLeft = maRange.getMinX() - ( fRight - maRange.getMaxX() ) / 2.0; break; } case RP_RT: { fLeft = maRange.getMinX() - ( fRight - maRange.getMaxX() ); break; } case RP_LM: { fTop = maRange.getMinY() - ( fBottom - maRange.getMaxY() ) / 2.0; break; } case RP_MM: { fLeft = maRange.getMinX() - ( fRight - maRange.getMaxX() ) / 2.0; fTop = maRange.getMinY() - ( fBottom - maRange.getMaxY() ) / 2.0; break; } case RP_RM: { fLeft = maRange.getMinX() - ( fRight - maRange.getMaxX() ); fTop = maRange.getMinY() - ( fBottom - maRange.getMaxY() ) / 2.0; break; } case RP_LB: { fTop = maRange.getMinY() - ( fBottom - maRange.getMaxY() ); break; } case RP_MB: { fLeft = maRange.getMinX() - ( fRight - maRange.getMaxX() ) / 2.0; fTop = maRange.getMinY() - ( fBottom - maRange.getMaxY() ); break; } case RP_RB: { fLeft = maRange.getMinX() - ( fRight - maRange.getMaxX() ); fTop = maRange.getMinY() - ( fBottom - maRange.getMaxY() ); break; } } return Rectangle(basegfx::fround(fLeft), basegfx::fround(fTop), basegfx::fround(fRight), basegfx::fround(fBottom)); } //------------------------------------------------------------------------ IMPL_LINK( SvxPositionSizeTabPage, ChangeWidthHdl, void *, EMPTYARG ) { if( maCbxScale.IsChecked() && maCbxScale.IsEnabled() ) { sal_Int64 nHeight(basegfx::fround64((mfOldHeight * (double)maMtrWidth.GetValue()) / mfOldWidth)); if(nHeight <= maMtrHeight.GetMax(FUNIT_NONE)) { maMtrHeight.SetUserValue(nHeight, FUNIT_NONE); } else { nHeight = maMtrHeight.GetMax(FUNIT_NONE); maMtrHeight.SetUserValue(nHeight); const sal_Int64 nWidth(basegfx::fround64((mfOldWidth * (double)nHeight) / mfOldHeight)); maMtrWidth.SetUserValue(nWidth, FUNIT_NONE); } } return( 0L ); } //------------------------------------------------------------------------ IMPL_LINK( SvxPositionSizeTabPage, ChangeHeightHdl, void *, EMPTYARG ) { if( maCbxScale.IsChecked() && maCbxScale.IsEnabled() ) { sal_Int64 nWidth(basegfx::fround64((mfOldWidth * (double)maMtrHeight.GetValue()) / mfOldHeight)); if(nWidth <= maMtrWidth.GetMax(FUNIT_NONE)) { maMtrWidth.SetUserValue(nWidth, FUNIT_NONE); } else { nWidth = maMtrWidth.GetMax(FUNIT_NONE); maMtrWidth.SetUserValue(nWidth); const sal_Int64 nHeight(basegfx::fround64((mfOldHeight * (double)nWidth) / mfOldWidth)); maMtrHeight.SetUserValue(nHeight, FUNIT_NONE); } } return( 0L ); } //------------------------------------------------------------------------ IMPL_LINK( SvxPositionSizeTabPage, ClickSizeProtectHdl, void *, EMPTYARG ) { UpdateControlStates(); return( 0L ); } //------------------------------------------------------------------------ IMPL_LINK( SvxPositionSizeTabPage, ClickAutoHdl, void *, EMPTYARG ) { if( maCbxScale.IsChecked() ) { mfOldWidth = std::max( (double)GetCoreValue( maMtrWidth, mePoolUnit ), 1.0 ); mfOldHeight = std::max( (double)GetCoreValue( maMtrHeight, mePoolUnit ), 1.0 ); } return( 0L ); } //------------------------------------------------------------------------ void SvxPositionSizeTabPage::FillUserData() { // Abgleich wird in der Ini-Datei festgehalten UniString aStr = UniString::CreateFromInt32( (sal_Int32) maCbxScale.IsChecked() ); SetUserData( aStr ); } // eof