/**************************************************************
*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*
*************************************************************/
// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_sc.hxx"
#include <com/sun/star/style/XStyleFamiliesSupplier.hpp>
#include <com/sun/star/beans/XPropertySet.hpp>
#include <com/sun/star/container/XNameAccess.hpp>
//------------------------------------------------------------------
//svdraw.hxx
#define _SDR_NOITEMS
#define _SDR_NOTOUCH
#define _SDR_NOTRANSFORM
#define _SI_NOSBXCONTROLS
#define _VCONT_HXX
#define _SI_NOOTHERFORMS
#define _VCTRLS_HXX
#define _SI_NOCONTROL
#define _SETBRW_HXX
#define _VCBRW_HXX
#define _SI_NOSBXCONTROLS
//------------------------------------------------------------------
#include "scitems.hxx"
#include <editeng/eeitem.hxx>
#include <sfx2/app.hxx>
#include <sfx2/viewfrm.hxx>
#include <sfx2/objface.hxx>
#include <sfx2/request.hxx>
#include <svl/whiter.hxx>
#include <vcl/msgbox.hxx>
#define _ZFORLIST_DECLARE_TABLE
#include <svl/stritem.hxx>
#include <svl/zformat.hxx>
#include <svl/languageoptions.hxx>
#include <editeng/boxitem.hxx>
#include <editeng/langitem.hxx>
#include <svx/numinf.hxx>
#include <sfx2/dispatch.hxx>
#include <sfx2/templdlg.hxx>
#include <sfx2/tplpitem.hxx>
#include <editeng/svxenum.hxx>
#include <svx/algitem.hxx>
#include <editeng/wghtitem.hxx>
#include <editeng/postitem.hxx>
#include <editeng/udlnitem.hxx>
#include <editeng/bolnitem.hxx>
#include <editeng/colritem.hxx>
#include <editeng/brshitem.hxx>
#include <editeng/frmdiritem.hxx>
#include <editeng/scripttypeitem.hxx>
#include <svtools/colorcfg.hxx>
#include <editeng/shaditem.hxx>
#include "formatsh.hxx"
#include "sc.hrc"
#include "globstr.hrc"
#include "docsh.hxx"
#include "patattr.hxx"
#include "scmod.hxx"
//CHINA001 #include "styledlg.hxx"
#include "attrdlg.hrc"
#include "stlpool.hxx"
#include "stlsheet.hxx"
#include "printfun.hxx"
#include "docpool.hxx"
#include "scresid.hxx"
#include "tabvwsh.hxx"
#include "undostyl.hxx"
#define ScFormatShell
#define TableFont
#define FormatForSelection
#include "scslots.hxx"
#include "scabstdlg.hxx" //CHINA001
namespace {
SvxCellHorJustify lclConvertSlotToHAlign( sal_uInt16 nSlot )
{
SvxCellHorJustify eHJustify = SVX_HOR_JUSTIFY_STANDARD;
switch( nSlot )
{
case SID_ALIGN_ANY_HDEFAULT: eHJustify = SVX_HOR_JUSTIFY_STANDARD; break;
case SID_ALIGN_ANY_LEFT: eHJustify = SVX_HOR_JUSTIFY_LEFT; break;
case SID_ALIGN_ANY_HCENTER: eHJustify = SVX_HOR_JUSTIFY_CENTER; break;
case SID_ALIGN_ANY_RIGHT: eHJustify = SVX_HOR_JUSTIFY_RIGHT; break;
case SID_ALIGN_ANY_JUSTIFIED: eHJustify = SVX_HOR_JUSTIFY_BLOCK; break;
default: DBG_ERRORFILE( "lclConvertSlotToHAlign - invalid slot" );
}
return eHJustify;
}
SvxCellVerJustify lclConvertSlotToVAlign( sal_uInt16 nSlot )
{
SvxCellVerJustify eVJustify = SVX_VER_JUSTIFY_STANDARD;
switch( nSlot )
{
case SID_ALIGN_ANY_VDEFAULT: eVJustify = SVX_VER_JUSTIFY_STANDARD; break;
case SID_ALIGN_ANY_TOP: eVJustify = SVX_VER_JUSTIFY_TOP; break;
case SID_ALIGN_ANY_VCENTER: eVJustify = SVX_VER_JUSTIFY_CENTER; break;
case SID_ALIGN_ANY_BOTTOM: eVJustify = SVX_VER_JUSTIFY_BOTTOM; break;
default: DBG_ERRORFILE( "lclConvertSlotToVAlign - invalid slot" );
}
return eVJustify;
}
} // namespace
TYPEINIT1( ScFormatShell, SfxShell );
SFX_IMPL_INTERFACE(ScFormatShell, SfxShell, ScResId(SCSTR_FORMATSHELL) )
{
SFX_OBJECTBAR_REGISTRATION( SFX_OBJECTBAR_OBJECT | SFX_VISIBILITY_STANDARD |
SFX_VISIBILITY_SERVER,
ScResId(RID_OBJECTBAR_FORMAT));
}
ScFormatShell::ScFormatShell(ScViewData* pData) :
SfxShell(pData->GetViewShell()),
pViewData(pData)
{
ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell();
SetPool( &pTabViewShell->GetPool() );
::svl::IUndoManager* pMgr = pViewData->GetSfxDocShell()->GetUndoManager();
SetUndoManager( pMgr );
if ( !pViewData->GetDocument()->IsUndoEnabled() )
{
pMgr->SetMaxUndoActionCount( 0 );
}
SetHelpId(HID_SCSHELL_FORMATSH);
SetName(String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM("Format")));
}
ScFormatShell::~ScFormatShell()
{
}
//------------------------------------------------------------------
void __EXPORT ScFormatShell::GetStyleState( SfxItemSet& rSet )
{
ScDocument* pDoc = GetViewData()->GetDocument();
ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell();
SfxStyleSheetBasePool* pStylePool = pDoc->GetStyleSheetPool();
sal_Bool bProtected = sal_False;
SCTAB nTabCount = pDoc->GetTableCount();
for (SCTAB i=0; i<nTabCount; i++)
if (pDoc->IsTabProtected(i)) // ueberhaupt eine Tabelle geschuetzt?
bProtected = sal_True;
SfxWhichIter aIter(rSet);
sal_uInt16 nWhich = aIter.FirstWhich();
sal_uInt16 nSlotId = 0;
while ( nWhich )
{
nSlotId = SfxItemPool::IsWhich( nWhich )
? GetPool().GetSlotId( nWhich )
: nWhich;
switch ( nSlotId )
{
case SID_STYLE_APPLY:
if ( !pStylePool )
rSet.DisableItem( nSlotId );
break;
case SID_STYLE_FAMILY2: // Zellvorlagen
{
SfxStyleSheet* pStyleSheet = (SfxStyleSheet*)
pTabViewShell->GetStyleSheetFromMarked();
if ( pStyleSheet )
rSet.Put( SfxTemplateItem( nSlotId, pStyleSheet->GetName() ) );
else
rSet.Put( SfxTemplateItem( nSlotId, String() ) );
}
break;
case SID_STYLE_FAMILY4: // Seitenvorlagen
{
SCTAB nCurTab = GetViewData()->GetTabNo();
String aPageStyle = pDoc->GetPageStyle( nCurTab );
SfxStyleSheet* pStyleSheet = (SfxStyleSheet*)pStylePool->
Find( aPageStyle, SFX_STYLE_FAMILY_PAGE );
if ( pStyleSheet )
rSet.Put( SfxTemplateItem( nSlotId, aPageStyle ) );
else
rSet.Put( SfxTemplateItem( nSlotId, String() ) );
}
break;
case SID_STYLE_WATERCAN:
{
rSet.Put( SfxBoolItem( nSlotId, SC_MOD()->GetIsWaterCan() ) );
}
break;
case SID_STYLE_UPDATE_BY_EXAMPLE:
{
ISfxTemplateCommon* pDesigner = SFX_APP()->
GetCurrentTemplateCommon(pTabViewShell->GetViewFrame()->GetBindings());
sal_Bool bPage = pDesigner && SFX_STYLE_FAMILY_PAGE == pDesigner->GetActualFamily();
if ( bProtected || bPage )
rSet.DisableItem( nSlotId );
}
break;
case SID_STYLE_EDIT:
case SID_STYLE_DELETE:
{
ISfxTemplateCommon* pDesigner = SFX_APP()->
GetCurrentTemplateCommon(pTabViewShell->GetViewFrame()->GetBindings());
sal_Bool bPage = pDesigner && SFX_STYLE_FAMILY_PAGE == pDesigner->GetActualFamily();
if ( bProtected && !bPage )
rSet.DisableItem( nSlotId );
}
break;
default:
break;
}
nWhich = aIter.NextWhich();
}
}
//------------------------------------------------------------------
void __EXPORT ScFormatShell::ExecuteStyle( SfxRequest& rReq )
{
// Wenn ToolBar vertikal :
if ( !rReq.GetArgs() )
{
pViewData->GetDispatcher().Execute( SID_STYLE_DESIGNER, SFX_CALLMODE_ASYNCHRON | SFX_CALLMODE_RECORD );
return;
}
//--------------------------------------------------------------------
SfxBindings& rBindings = pViewData->GetBindings();
const SfxItemSet* pArgs = rReq.GetArgs();
const sal_uInt16 nSlotId = rReq.GetSlot();
const SCTAB nCurTab = GetViewData()->GetTabNo();
ScDocShell* pDocSh = GetViewData()->GetDocShell();
ScTabViewShell* pTabViewShell= GetViewData()->GetViewShell();
ScDocument* pDoc = pDocSh->GetDocument();
ScMarkData& rMark = GetViewData()->GetMarkData();
ScModule* pScMod = SC_MOD();
String aRefName;
sal_Bool bUndo = pDoc->IsUndoEnabled();
if ( (nSlotId == SID_STYLE_NEW)
|| (nSlotId == SID_STYLE_EDIT)
|| (nSlotId == SID_STYLE_DELETE)
|| (nSlotId == SID_STYLE_APPLY)
|| (nSlotId == SID_STYLE_WATERCAN)
|| (nSlotId == SID_STYLE_FAMILY)
|| (nSlotId == SID_STYLE_NEW_BY_EXAMPLE)
|| (nSlotId == SID_STYLE_UPDATE_BY_EXAMPLE) )
{
SfxStyleSheetBasePool* pStylePool = pDoc->GetStyleSheetPool();
SfxStyleSheetBase* pStyleSheet = NULL;
sal_Bool bStyleToMarked = sal_False;
sal_Bool bListAction = sal_False;
sal_Bool bAddUndo = sal_False; // add ScUndoModifyStyle (style modified)
ScStyleSaveData aOldData; // for undo/redo
ScStyleSaveData aNewData;
SfxStyleFamily eFamily = SFX_STYLE_FAMILY_PARA;
const SfxPoolItem* pFamItem;
if ( pArgs && SFX_ITEM_SET == pArgs->GetItemState( SID_STYLE_FAMILY, sal_True, &pFamItem ) )
eFamily = (SfxStyleFamily)((const SfxUInt16Item*)pFamItem)->GetValue();
else
if ( pArgs && SFX_ITEM_SET == pArgs->GetItemState( SID_STYLE_FAMILYNAME, sal_True, &pFamItem ) )
{
String sFamily = ((const SfxStringItem*)pFamItem)->GetValue();
if (sFamily.CompareToAscii("CellStyles") == COMPARE_EQUAL)
eFamily = SFX_STYLE_FAMILY_PARA;
else
if (sFamily.CompareToAscii("PageStyles") == COMPARE_EQUAL)
eFamily = SFX_STYLE_FAMILY_PAGE;
}
String aStyleName;
sal_uInt16 nRetMask = 0xffff;
// #96983# only stylist sends focus to sheet
// sal_Bool bGrabFocus = ( SID_STYLE_APPLY == nSlotId );
pStylePool->SetSearchMask( eFamily, SFXSTYLEBIT_ALL );
switch ( nSlotId )
{
case SID_STYLE_NEW:
{
const SfxPoolItem* pNameItem;
if (pArgs && SFX_ITEM_SET == pArgs->GetItemState( nSlotId, sal_True, &pNameItem ))
aStyleName = ((const SfxStringItem*)pNameItem)->GetValue();
const SfxPoolItem* pRefItem=NULL;
if (pArgs && SFX_ITEM_SET == pArgs->GetItemState( SID_STYLE_REFERENCE, sal_True, &pRefItem ))
{
if(pRefItem!=NULL)
aRefName = ((const SfxStringItem*)pRefItem)->GetValue();
}
pStyleSheet = &(pStylePool->Make( aStyleName, eFamily,
SFXSTYLEBIT_USERDEF ) );
if ( pStyleSheet && pStyleSheet->HasParentSupport() )
pStyleSheet->SetParent(aRefName);
}
break;
case SID_STYLE_APPLY:
{
SFX_REQUEST_ARG( rReq, pNameItem, SfxStringItem, SID_APPLY_STYLE, sal_False );
SFX_REQUEST_ARG( rReq, pFamilyItem, SfxStringItem, SID_STYLE_FAMILYNAME, sal_False );
if ( pFamilyItem && pNameItem )
{
com::sun::star::uno::Reference< com::sun::star::style::XStyleFamiliesSupplier > xModel(pDocSh->GetModel(), com::sun::star::uno::UNO_QUERY);
try
{
com::sun::star::uno::Reference< com::sun::star::container::XNameAccess > xStyles;
com::sun::star::uno::Reference< com::sun::star::container::XNameAccess > xCont = xModel->getStyleFamilies();
xCont->getByName(pFamilyItem->GetValue()) >>= xStyles;
com::sun::star::uno::Reference< com::sun::star::beans::XPropertySet > xInfo;
xStyles->getByName( pNameItem->GetValue() ) >>= xInfo;
::rtl::OUString aUIName;
xInfo->getPropertyValue( ::rtl::OUString::createFromAscii("DisplayName") ) >>= aUIName;
if ( aUIName.getLength() )
rReq.AppendItem( SfxStringItem( SID_STYLE_APPLY, aUIName ) );
}
catch( com::sun::star::uno::Exception& )
{
}
}
}
case SID_STYLE_EDIT:
case SID_STYLE_DELETE:
case SID_STYLE_NEW_BY_EXAMPLE:
{
const SfxPoolItem* pNameItem;
if (pArgs && SFX_ITEM_SET == pArgs->GetItemState( nSlotId, sal_True, &pNameItem ))
aStyleName = ((const SfxStringItem*)pNameItem)->GetValue();
pStyleSheet = pStylePool->Find( aStyleName, eFamily );
aOldData.InitFromStyle( pStyleSheet );
}
break;
case SID_STYLE_WATERCAN:
{
sal_Bool bWaterCan = pScMod->GetIsWaterCan();
if( !bWaterCan )
{
const SfxPoolItem* pItem;
if ( SFX_ITEM_SET ==
pArgs->GetItemState( nSlotId, sal_True, &pItem ) )
{
const SfxStringItem* pStrItem = PTR_CAST(SfxStringItem,pItem);
if ( pStrItem )
{
aStyleName = pStrItem->GetValue();
pStyleSheet = pStylePool->Find( aStyleName, eFamily );
if ( pStyleSheet )
{
((ScStyleSheetPool*)pStylePool)->
SetActualStyleSheet( pStyleSheet );
rReq.Done();
}
}
}
}
if ( !bWaterCan && pStyleSheet )
{
pScMod->SetWaterCan( sal_True );
pTabViewShell->SetActivePointer( Pointer(POINTER_FILL) );
rReq.Done();
}
else
{
pScMod->SetWaterCan( sal_False );
pTabViewShell->SetActivePointer( Pointer(POINTER_ARROW) );
rReq.Done();
}
}
break;
default:
break;
}
// Neuen Style fuer WaterCan-Mode setzen
if ( nSlotId == SID_STYLE_APPLY && pScMod->GetIsWaterCan() && pStyleSheet )
((ScStyleSheetPool*)pStylePool)->SetActualStyleSheet( pStyleSheet );
switch ( eFamily )
{
case SFX_STYLE_FAMILY_PARA:
{
switch ( nSlotId )
{
case SID_STYLE_DELETE:
{
if ( pStyleSheet )
{
pTabViewShell->RemoveStyleSheetInUse( pStyleSheet );
pStylePool->Remove( pStyleSheet );
pTabViewShell->InvalidateAttribs();
nRetMask = sal_True;
bAddUndo = sal_True;
rReq.Done();
}
else
nRetMask = sal_False;
}
break;
case SID_STYLE_APPLY:
{
if ( pStyleSheet && !pScMod->GetIsWaterCan() )
{
// Anwenden der Vorlage auf das Dokument
pTabViewShell->SetStyleSheetToMarked( (SfxStyleSheet*)pStyleSheet );
pTabViewShell->InvalidateAttribs();
rReq.Done();
}
}
break;
case SID_STYLE_NEW_BY_EXAMPLE:
case SID_STYLE_UPDATE_BY_EXAMPLE:
{
// Vorlage erzeugen/ersetzen durch Attribute
// an der Cursor-Position:
const ScPatternAttr* pAttrItem = NULL;
// Die Abfrage, ob markiert ist, war hier immer falsch,
// darum jetzt gar nicht mehr, und einfach vom Cursor.
// Wenn Attribute aus der Selektion genommen werden sollen,
// muss noch darauf geachtet werden, Items aus Vorlagen nicht
// zu uebernehmen (GetSelectionPattern sammelt auch Items aus
// Vorlagen zusammen) (#44748#)
// pAttrItem = GetSelectionPattern();
// ScViewData* pViewData = GetViewData();
SCCOL nCol = pViewData->GetCurX();
SCROW nRow = pViewData->GetCurY();
pAttrItem = pDoc->GetPattern( nCol, nRow, nCurTab );
SfxItemSet aAttrSet = pAttrItem->GetItemSet();
aAttrSet.ClearItem( ATTR_MERGE );
aAttrSet.ClearItem( ATTR_MERGE_FLAG );
// bedingte Formatierung und Gueltigkeit nicht uebernehmen,
// weil sie in der Vorlage nicht editiert werden koennen
aAttrSet.ClearItem( ATTR_VALIDDATA );
aAttrSet.ClearItem( ATTR_CONDITIONAL );
if ( SID_STYLE_NEW_BY_EXAMPLE == nSlotId )
{
if ( bUndo )
{
String aUndo = ScGlobal::GetRscString( STR_UNDO_EDITCELLSTYLE );
pDocSh->GetUndoManager()->EnterListAction( aUndo, aUndo );
bListAction = sal_True;
}
sal_Bool bConvertBack = sal_False;
SfxStyleSheet* pSheetInUse = (SfxStyleSheet*)
pTabViewShell->GetStyleSheetFromMarked();
// wenn neuer Style vorhanden und in der Selektion
// verwendet wird, so darf der Parent nicht uebernommen
// werden:
if ( pStyleSheet && pSheetInUse && pStyleSheet == pSheetInUse )
pSheetInUse = NULL;
// wenn bereits vorhanden, erstmal entfernen...
if ( pStyleSheet )
{
// Style-Pointer zu Namen vor Erase,
// weil Zellen sonst ungueltige Pointer
// enthalten.
//!!! bei Gelenheit mal eine Methode, die
// das fuer einen bestimmten Style macht
pDoc->StylesToNames();
bConvertBack = sal_True;
pStylePool->Remove(pStyleSheet);
}
// ...und neu anlegen
pStyleSheet = &pStylePool->Make( aStyleName, eFamily,
SFXSTYLEBIT_USERDEF );
// wenn ein Style vorhanden ist, so wird dieser
// Parent der neuen Vorlage:
if ( pSheetInUse && pStyleSheet->HasParentSupport() )
pStyleSheet->SetParent( pSheetInUse->GetName() );
if ( bConvertBack )
// Namen zu Style-Pointer
pDoc->UpdStlShtPtrsFrmNms();
else
pDoc->GetPool()->CellStyleCreated( aStyleName );
// Attribute uebernehmen und Style anwenden
pStyleSheet->GetItemSet().Put( aAttrSet );
pTabViewShell->UpdateStyleSheetInUse( pStyleSheet );
// call SetStyleSheetToMarked after adding the ScUndoModifyStyle
// (pStyleSheet pointer is used!)
bStyleToMarked = sal_True;
}
else // ( nSlotId == SID_STYLE_UPDATE_BY_EXAMPLE )
{
pStyleSheet = (SfxStyleSheet*)pTabViewShell->GetStyleSheetFromMarked();
if ( pStyleSheet )
{
aOldData.InitFromStyle( pStyleSheet );
if ( bUndo )
{
String aUndo = ScGlobal::GetRscString( STR_UNDO_EDITCELLSTYLE );
pDocSh->GetUndoManager()->EnterListAction( aUndo, aUndo );
bListAction = sal_True;
}
pStyleSheet->GetItemSet().Put( aAttrSet );
pTabViewShell->UpdateStyleSheetInUse( pStyleSheet );
// call SetStyleSheetToMarked after adding the ScUndoModifyStyle
// (pStyleSheet pointer is used!)
bStyleToMarked = sal_True;
}
}
aNewData.InitFromStyle( pStyleSheet );
bAddUndo = sal_True;
rReq.Done();
}
break;
default:
break;
}
} // case SFX_STYLE_FAMILY_PARA:
break;
case SFX_STYLE_FAMILY_PAGE:
{
switch ( nSlotId )
{
case SID_STYLE_DELETE:
{
nRetMask = ( NULL != pStyleSheet );
if ( pStyleSheet )
{
if ( pDoc->RemovePageStyleInUse( pStyleSheet->GetName() ) )
{
ScPrintFunc( pDocSh, pTabViewShell->GetPrinter(sal_True), nCurTab ).UpdatePages();
rBindings.Invalidate( SID_STATUS_PAGESTYLE );
rBindings.Invalidate( FID_RESET_PRINTZOOM );
}
pStylePool->Remove( pStyleSheet );
rBindings.Invalidate( SID_STYLE_FAMILY4 );
pDocSh->SetDocumentModified();
bAddUndo = sal_True;
rReq.Done();
}
}
break;
case SID_STYLE_APPLY:
{
nRetMask = ( NULL != pStyleSheet );
if ( pStyleSheet && !pScMod->GetIsWaterCan() )
{
ScUndoApplyPageStyle* pUndoAction = 0;
for( SCTAB nTab = 0, nTabCount = pDoc->GetTableCount(); nTab < nTabCount; ++nTab )
{
if( rMark.GetTableSelect( nTab ) )
{
String aOldName = pDoc->GetPageStyle( nTab );
if ( aOldName != aStyleName )
{
pDoc->SetPageStyle( nTab, aStyleName );
ScPrintFunc( pDocSh, pTabViewShell->GetPrinter(sal_True), nTab ).UpdatePages();
if( !pUndoAction )
pUndoAction = new ScUndoApplyPageStyle( pDocSh, aStyleName );
pUndoAction->AddSheetAction( nTab, aOldName );
}
}
}
if( pUndoAction )
{
pDocSh->GetUndoManager()->AddUndoAction( pUndoAction );
pDocSh->SetDocumentModified();
rBindings.Invalidate( SID_STYLE_FAMILY4 );
rBindings.Invalidate( SID_STATUS_PAGESTYLE );
rBindings.Invalidate( FID_RESET_PRINTZOOM );
}
rReq.Done();
}
}
break;
case SID_STYLE_NEW_BY_EXAMPLE:
{
const String& rStrCurStyle = pDoc->GetPageStyle( nCurTab );
if ( rStrCurStyle != aStyleName )
{
SfxStyleSheetBase* pCurStyle = pStylePool->Find( rStrCurStyle, eFamily );
SfxItemSet aAttrSet = pCurStyle->GetItemSet();
SCTAB nInTab;
sal_Bool bUsed = pDoc->IsPageStyleInUse( aStyleName, &nInTab );
// wenn bereits vorhanden, erstmal entfernen...
if ( pStyleSheet )
pStylePool->Remove( pStyleSheet );
// ...und neu anlegen
pStyleSheet = &pStylePool->Make( aStyleName, eFamily,
SFXSTYLEBIT_USERDEF );
// Attribute uebernehmen
pStyleSheet->GetItemSet().Put( aAttrSet );
pDocSh->SetDocumentModified();
// wenn in Verwendung -> Update
if ( bUsed )
ScPrintFunc( pDocSh, pTabViewShell->GetPrinter(sal_True), nInTab ).UpdatePages();
aNewData.InitFromStyle( pStyleSheet );
bAddUndo = sal_True;
rReq.Done();
nRetMask = sal_True;
}
}
break;
default:
break;
} // switch ( nSlotId )
} // case SFX_STYLE_FAMILY_PAGE:
break;
default:
break;
} // switch ( eFamily )
// Neu anlegen oder bearbeiten ueber Dialog:
if ( nSlotId == SID_STYLE_NEW || nSlotId == SID_STYLE_EDIT )
{
if ( pStyleSheet )
{
SvxNumberInfoItem* pNumberInfoItem = NULL;
SfxStyleFamily eFam = pStyleSheet->GetFamily();
// ScDocument* pDoc = GetViewData()->GetDocument();
// ScDocShell* pDocSh = GetViewData()->GetDocShell();
//CHINA001 ScStyleDlg* pDlg = NULL;
SfxAbstractTabDialog* pDlg = NULL; //CHINA001
sal_uInt16 nRsc = 0;
// #37034#/#37245# alte Items aus der Vorlage merken
SfxItemSet aOldSet = pStyleSheet->GetItemSet();
String aOldName = pStyleSheet->GetName();
switch ( eFam )
{
case SFX_STYLE_FAMILY_PAGE:
nRsc = RID_SCDLG_STYLES_PAGE;
break;
case SFX_STYLE_FAMILY_PARA:
default:
{
SfxItemSet& rSet = pStyleSheet->GetItemSet();
const SfxPoolItem* pItem;
if ( rSet.GetItemState( ATTR_VALUE_FORMAT,
sal_False, &pItem ) == SFX_ITEM_SET )
{
// NumberFormat Value aus Value und Language
// erzeugen und eintueten
sal_uLong nFormat =
((SfxUInt32Item*)pItem)->GetValue();
LanguageType eLang =
((SvxLanguageItem*)&rSet.Get(
ATTR_LANGUAGE_FORMAT ))->GetLanguage();
sal_uLong nLangFormat = pDoc->GetFormatTable()->
GetFormatForLanguageIfBuiltIn( nFormat, eLang );
if ( nLangFormat != nFormat )
{
SfxUInt32Item aNewItem( ATTR_VALUE_FORMAT, nLangFormat );
rSet.Put( aNewItem );
aOldSet.Put( aNewItem );
// auch in aOldSet fuer Vergleich nach dem Dialog,
// sonst geht evtl. eine Aenderung der Sprache verloren
}
}
pTabViewShell->MakeNumberInfoItem( pDoc, GetViewData(), &pNumberInfoItem );
pDocSh->PutItem( *pNumberInfoItem );
nRsc = RID_SCDLG_STYLES_PAR;
// auf jeden Fall ein SvxBoxInfoItem mit Table = sal_False im Set:
// (wenn gar kein Item da ist, loescht der Dialog auch das
// BORDER_OUTER SvxBoxItem aus dem Vorlagen-Set)
if ( rSet.GetItemState( ATTR_BORDER_INNER, sal_False ) != SFX_ITEM_SET )
{
SvxBoxInfoItem aBoxInfoItem( ATTR_BORDER_INNER );
aBoxInfoItem.SetTable(sal_False); // keine inneren Linien
aBoxInfoItem.SetDist(sal_True);
aBoxInfoItem.SetMinDist(sal_False);
rSet.Put( aBoxInfoItem );
}
}
break;
}
// If GetDefDialogParent is a dialog, it must be used
// (style catalog)
Window* pParent = Application::GetDefDialogParent();
if ( !pParent || !pParent->IsDialog() )
{
// #107256# GetDefDialogParent currently doesn't return the window
// that was set with SetDefDialogParent (but dynamically finds the
// topmost parent of the focus window), so IsDialog above is FALSE
// even if called from the style catalog.
// -> Use NULL if a modal dialog is open, to enable the Dialog's
// default parent handling.
if ( Application::IsInModalMode() )
pParent = NULL;
else
pParent = pTabViewShell->GetDialogParent();
}
pTabViewShell->SetInFormatDialog(sal_True);
//CHINA001 pDlg = new ScStyleDlg( pParent, *pStyleSheet, nRsc );
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
DBG_ASSERT(pFact, "ScAbstractFactory create fail!");//CHINA001
pDlg = pFact->CreateScStyleDlg( pParent, *pStyleSheet, nRsc, nRsc );
DBG_ASSERT(pDlg, "Dialog create fail!");//CHINA001
short nResult = pDlg->Execute();
pTabViewShell->SetInFormatDialog(sal_False);
if ( nResult == RET_OK )
{
const SfxItemSet* pOutSet = pDlg->GetOutputItemSet();
if ( pOutSet )
{
nRetMask = pStyleSheet->GetMask();
// #37034#/#37245# Attribut-Vergleiche (frueher in ModifyStyleSheet)
// jetzt hier mit den alten Werten (Style ist schon veraendert)
if ( SFX_STYLE_FAMILY_PARA == eFam )
{
// pDoc->CellStyleChanged( *pStyleSheet, aOldSet );
SfxItemSet& rNewSet = pStyleSheet->GetItemSet();
sal_Bool bNumFormatChanged;
if ( ScGlobal::CheckWidthInvalidate(
bNumFormatChanged, aOldSet, rNewSet ) )
pDoc->InvalidateTextWidth( NULL, NULL, bNumFormatChanged );
SCTAB nTabCount = pDoc->GetTableCount();
for (SCTAB nTab=0; nTab<nTabCount; nTab++)
if (pDoc->IsStreamValid(nTab))
pDoc->SetStreamValid(nTab, sal_False);
sal_uLong nOldFormat = ((const SfxUInt32Item&)aOldSet.
Get( ATTR_VALUE_FORMAT )).GetValue();
sal_uLong nNewFormat = ((const SfxUInt32Item&)rNewSet.
Get( ATTR_VALUE_FORMAT )).GetValue();
if ( nNewFormat != nOldFormat )
{
SvNumberFormatter* pFormatter = pDoc->GetFormatTable();
const SvNumberformat* pOld = pFormatter->GetEntry( nOldFormat );
const SvNumberformat* pNew = pFormatter->GetEntry( nNewFormat );
if ( pOld && pNew && pOld->GetLanguage() != pNew->GetLanguage() )
rNewSet.Put( SvxLanguageItem(
pNew->GetLanguage(), ATTR_LANGUAGE_FORMAT ) );
}
pDoc->GetPool()->CellStyleCreated( pStyleSheet->GetName() );
}
else
{
//! auch fuer Seitenvorlagen die Abfragen hier
String aNewName = pStyleSheet->GetName();
if ( aNewName != aOldName &&
pDoc->RenamePageStyleInUse( aOldName, aNewName ) )
{
rBindings.Invalidate( SID_STATUS_PAGESTYLE );
rBindings.Invalidate( FID_RESET_PRINTZOOM );
}
pDoc->ModifyStyleSheet( *pStyleSheet, *pOutSet );
rBindings.Invalidate( FID_RESET_PRINTZOOM );
}
pDocSh->SetDocumentModified();
if ( SFX_STYLE_FAMILY_PARA == eFam )
{
pTabViewShell->UpdateNumberFormatter( pDoc,
(const SvxNumberInfoItem&)
*(pDocSh->GetItem(SID_ATTR_NUMBERFORMAT_INFO)) );
pTabViewShell->UpdateStyleSheetInUse( pStyleSheet );
pTabViewShell->InvalidateAttribs();
}
aNewData.InitFromStyle( pStyleSheet );
bAddUndo = sal_True;
}
}
else
{
if ( nSlotId == SID_STYLE_NEW )
pStylePool->Remove( pStyleSheet );
else
{
// falls zwischendurch etwas mit dem temporaer geaenderten
// ItemSet gepainted wurde:
pDocSh->PostPaintGridAll();
}
}
delete pDlg;
}
}
// if ( nRetMask != 0xffff )// Irgendein Wert MUSS geliefert werden JN
rReq.SetReturnValue( SfxUInt16Item( nSlotId, nRetMask ) );
// #96983# only stylist sends focus to sheet
// if ( bGrabFocus )
// pTabViewShell->GetActiveWin()->GrabFocus();
if ( bAddUndo && bUndo)
pDocSh->GetUndoManager()->AddUndoAction(
new ScUndoModifyStyle( pDocSh, eFamily, aOldData, aNewData ) );
if ( bStyleToMarked )
{
// call SetStyleSheetToMarked after adding the ScUndoModifyStyle,
// so redo will find the modified style
pTabViewShell->SetStyleSheetToMarked( (SfxStyleSheet*)pStyleSheet );
pTabViewShell->InvalidateAttribs();
}
if ( bListAction )
pDocSh->GetUndoManager()->LeaveListAction();
}
else
{
DBG_ERROR( "Unknown slot (ScViewShell::ExecuteStyle)" );
}
}
void ScFormatShell::ExecuteNumFormat( SfxRequest& rReq )
{
ScModule* pScMod = SC_MOD();
ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell();
const SfxItemSet* pReqArgs = rReq.GetArgs();
sal_uInt16 nSlot = rReq.GetSlot();
pTabViewShell->HideListBox(); // Autofilter-DropDown-Listbox
// Eingabe beenden
if ( GetViewData()->HasEditView( GetViewData()->GetActivePart() ) )
{
switch ( nSlot )
{
case SID_NUMBER_TWODEC:
case SID_NUMBER_SCIENTIFIC:
case SID_NUMBER_DATE:
case SID_NUMBER_CURRENCY:
case SID_NUMBER_PERCENT:
case SID_NUMBER_STANDARD:
case SID_NUMBER_FORMAT:
case SID_NUMBER_INCDEC:
case SID_NUMBER_DECDEC:
case FID_DEFINE_NAME:
case FID_USE_NAME:
case FID_INSERT_NAME:
case SID_SPELL_DIALOG:
case SID_HANGUL_HANJA_CONVERSION:
pScMod->InputEnterHandler();
pTabViewShell->UpdateInputHandler();
break;
default:
break;
}
}
switch ( nSlot )
{
case SID_NUMBER_TWODEC:
pTabViewShell->SetNumberFormat( NUMBERFORMAT_NUMBER, 4 ); // Standard+4 = #.##0,00
rReq.Done();
break;
case SID_NUMBER_SCIENTIFIC:
pTabViewShell->SetNumberFormat( NUMBERFORMAT_SCIENTIFIC );
rReq.Done();
break;
case SID_NUMBER_DATE:
pTabViewShell->SetNumberFormat( NUMBERFORMAT_DATE );
rReq.Done();
break;
case SID_NUMBER_TIME:
pTabViewShell->SetNumberFormat( NUMBERFORMAT_TIME );
rReq.Done();
break;
case SID_NUMBER_CURRENCY:
pTabViewShell->SetNumberFormat( NUMBERFORMAT_CURRENCY );
rReq.Done();
break;
case SID_NUMBER_PERCENT:
pTabViewShell->SetNumberFormat( NUMBERFORMAT_PERCENT );
rReq.Done();
break;
case SID_NUMBER_STANDARD:
pTabViewShell->SetNumberFormat( NUMBERFORMAT_NUMBER );
rReq.Done();
break;
case SID_NUMBER_INCDEC:
pTabViewShell->ChangeNumFmtDecimals( sal_True );
rReq.Done();
break;
case SID_NUMBER_DECDEC:
pTabViewShell->ChangeNumFmtDecimals( sal_False );
rReq.Done();
break;
case SID_NUMBER_FORMAT:
//if ( pReqArgs )
//{
// const SfxPoolItem* pItem;
// if(pReqArgs->GetItemState(nSlot, sal_True, &pItem) == SFX_ITEM_SET)
// {
// String aCode = ((const SfxStringItem*)pItem)->GetValue();
// pTabViewShell->SetNumFmtByStr( aCode );
// }
//}
// symphony version with format interpretation
if(pReqArgs)
{
const SfxPoolItem* pItem;
ScDocument* pDoc = pViewData->GetDocument();
SvNumberFormatter* pFormatter = pDoc->GetFormatTable();
LanguageType eLanguage = ScGlobal::eLnge;
sal_Int16 eType = -1;
sal_uInt32 nCurrentNumberFormat;
pDoc->GetNumberFormat(pViewData->GetCurX(), pViewData->GetCurY(), pViewData->GetTabNo(), nCurrentNumberFormat);
const SvNumberformat* pEntry = pFormatter->GetEntry(nCurrentNumberFormat);
if(pEntry)
{
eLanguage = pEntry->GetLanguage();
eType = pEntry->GetType();
}
//Just use eType to judge whether the command is fired for NUMBER/PERCENT/CURRENCY
//In sidebar, users can fire SID_NUMBER_FORMAT command by operating the related UI controls before they are disable
switch(eType)
{
case NUMBERFORMAT_ALL:
case NUMBERFORMAT_NUMBER:
case NUMBERFORMAT_NUMBER| NUMBERFORMAT_DEFINED:
case NUMBERFORMAT_PERCENT:
case NUMBERFORMAT_PERCENT| NUMBERFORMAT_DEFINED:
case NUMBERFORMAT_CURRENCY:
case NUMBERFORMAT_CURRENCY|NUMBERFORMAT_DEFINED:
eType = 0;
break;
default:
eType =-1;
}
if(SFX_ITEM_SET == pReqArgs->GetItemState(nSlot, true, &pItem) && eType != -1)
{
String aCode = ((const SfxStringItem*)pItem)->GetValue();
sal_uInt16 aLen = aCode.Len();
String* sFormat = new String[4];
String sTmpStr = String::CreateFromAscii("");
sal_uInt16 nCount(0);
sal_uInt16 nStrCount(0);
while(nCount < aLen)
{
sal_Unicode cChar = aCode.GetChar(nCount);
if(cChar == sal_Unicode(','))
{
sFormat[nStrCount] = sTmpStr;
sTmpStr = String::CreateFromAscii("");
nStrCount++;
}
else
{
sTmpStr += cChar;
}
nCount++;
if(nStrCount > 3)
break;
}
const sal_Bool bThousand = (sal_Bool)sFormat[0].ToInt32();
const sal_Bool bNegRed = (sal_Bool)sFormat[1].ToInt32();
const sal_uInt16 nPrecision = (sal_uInt16)sFormat[2].ToInt32();
const sal_uInt16 nLeadZeroes = (sal_uInt16)sFormat[3].ToInt32();
pFormatter->GenerateFormat(
aCode,
nCurrentNumberFormat,//modify
eLanguage,
bThousand,
bNegRed,
nPrecision,
nLeadZeroes);
pTabViewShell->SetNumFmtByStr(aCode);
delete[] sFormat;
}
}
break;
case SID_ATTR_NUMBERFORMAT_VALUE:
if ( pReqArgs )
{
const SfxPoolItem* pItem;
if ( pReqArgs->GetItemState( ATTR_VALUE_FORMAT, sal_True, &pItem ) == SFX_ITEM_SET )
{
// We have to accomplish this using ApplyAttributes()
// because we also need the language information to be
// considered.
const SfxItemSet& rOldSet =
pTabViewShell->GetSelectionPattern()->GetItemSet();
SfxItemPool* pDocPool = GetViewData()->GetDocument()->GetPool();
SfxItemSet aNewSet( *pDocPool, ATTR_PATTERN_START, ATTR_PATTERN_END );
aNewSet.Put( *pItem );
pTabViewShell->ApplyAttributes( &aNewSet, &rOldSet, sal_True );
}
}
break;
case SID_NUMBER_TYPE_FORMAT:
if ( pReqArgs )
{
const SfxPoolItem* pItem;
if ( pReqArgs->GetItemState( nSlot, sal_True, &pItem ) == SFX_ITEM_SET )
{
sal_uInt16 nFormat = ((SfxInt16Item *)pItem)->GetValue();
switch(nFormat)
{
case 0:
pTabViewShell->SetNumberFormat( NUMBERFORMAT_NUMBER); //Modify
break;
case 1:
pTabViewShell->SetNumberFormat( NUMBERFORMAT_NUMBER, 2 ); //Modify
break;
case 2:
pTabViewShell->SetNumberFormat( NUMBERFORMAT_PERCENT );
break;
case 3:
pTabViewShell->SetNumberFormat( NUMBERFORMAT_CURRENCY );
break;
case 4:
pTabViewShell->SetNumberFormat( NUMBERFORMAT_DATE );
break;
case 5:
pTabViewShell->SetNumberFormat( NUMBERFORMAT_TIME );
break;
case 6:
pTabViewShell->SetNumberFormat( NUMBERFORMAT_SCIENTIFIC );
break;
case 7:
pTabViewShell->SetNumberFormat( NUMBERFORMAT_FRACTION );
break;
case 8:
pTabViewShell->SetNumberFormat( NUMBERFORMAT_LOGICAL );
break;
case 9:
pTabViewShell->SetNumberFormat( NUMBERFORMAT_TEXT );
break;
default:
;
}
rReq.Done();
}
}
break;
default:
DBG_ERROR("falscher Slot bei ExecuteEdit");
break;
}
}
//------------------------------------------------------------------
#define APPLY_HOR_JUSTIFY(j) \
{ \
if ( !pHorJustify || (eHorJustify != (j) ) ) \
pTabViewShell->ApplyAttr( SvxHorJustifyItem( (j) ) ); \
else \
pTabViewShell->ApplyAttr( SvxHorJustifyItem( SVX_HOR_JUSTIFY_STANDARD ) ); \
}
#define APPLY_VER_JUSTIFY(j) \
{ \
if ( !pVerJustify || (eVerJustify != (j) ) ) \
pTabViewShell->ApplyAttr( SvxVerJustifyItem( (j) ) ); \
else \
pTabViewShell->ApplyAttr( SvxVerJustifyItem( SVX_VER_JUSTIFY_STANDARD ) ); \
}
void ScFormatShell::ExecuteAlignment( SfxRequest& rReq )
{
ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell();
SfxBindings& rBindings = pViewData->GetBindings();
const SfxItemSet* pSet = rReq.GetArgs();
sal_uInt16 nSlot = rReq.GetSlot();
pTabViewShell->HideListBox(); // Autofilter-DropDown-Listbox
switch( nSlot )
{
// pseudo slots for Format menu
case SID_ALIGN_ANY_HDEFAULT:
case SID_ALIGN_ANY_LEFT:
case SID_ALIGN_ANY_HCENTER:
case SID_ALIGN_ANY_RIGHT:
case SID_ALIGN_ANY_JUSTIFIED:
pTabViewShell->ApplyAttr( SvxHorJustifyItem( lclConvertSlotToHAlign( nSlot ), ATTR_HOR_JUSTIFY ) );
break;
case SID_ALIGN_ANY_VDEFAULT:
case SID_ALIGN_ANY_TOP:
case SID_ALIGN_ANY_VCENTER:
case SID_ALIGN_ANY_BOTTOM:
pTabViewShell->ApplyAttr( SvxVerJustifyItem( lclConvertSlotToVAlign( nSlot ), ATTR_VER_JUSTIFY ) );
break;
default:
if( pSet )
{
const SfxPoolItem* pItem = NULL;
if( pSet->GetItemState(GetPool().GetWhich(nSlot), sal_True, &pItem ) == SFX_ITEM_SET )
{
switch ( nSlot )
{
case SID_ATTR_ALIGN_HOR_JUSTIFY:
case SID_ATTR_ALIGN_VER_JUSTIFY:
case SID_ATTR_ALIGN_INDENT:
case SID_ATTR_ALIGN_HYPHENATION:
case SID_ATTR_ALIGN_DEGREES:
case SID_ATTR_ALIGN_LOCKPOS:
case SID_ATTR_ALIGN_MARGIN:
case SID_ATTR_ALIGN_STACKED:
pTabViewShell->ApplyAttr( *pItem );
break;
case SID_H_ALIGNCELL:
{
SvxCellHorJustify eJust = (SvxCellHorJustify)((const SvxHorJustifyItem*)pItem)->GetValue();
// #i78476# update alignment of text in cell edit mode
pTabViewShell->UpdateInputHandlerCellAdjust( eJust );
pTabViewShell->ApplyAttr( SvxHorJustifyItem( eJust, ATTR_HOR_JUSTIFY ) );
}
break;
case SID_V_ALIGNCELL:
pTabViewShell->ApplyAttr( SvxVerJustifyItem( (SvxCellVerJustify)((const SvxVerJustifyItem*)pItem)->GetValue(), ATTR_VER_JUSTIFY ) );
break;
default:
DBG_ERROR( "ExecuteAlignment: invalid slot" );
return;
}
}
}
}
rBindings.Invalidate( SID_ATTR_PARA_ADJUST_LEFT );
rBindings.Invalidate( SID_ATTR_PARA_ADJUST_RIGHT );
rBindings.Invalidate( SID_ATTR_PARA_ADJUST_BLOCK );
rBindings.Invalidate( SID_ATTR_PARA_ADJUST_CENTER);
rBindings.Invalidate( SID_ALIGNLEFT );
rBindings.Invalidate( SID_ALIGNRIGHT );
rBindings.Invalidate( SID_ALIGNCENTERHOR );
rBindings.Invalidate( SID_ALIGNBLOCK );
rBindings.Invalidate( SID_ALIGNTOP );
rBindings.Invalidate( SID_ALIGNBOTTOM );
rBindings.Invalidate( SID_ALIGNCENTERVER );
rBindings.Invalidate( SID_V_ALIGNCELL );
rBindings.Invalidate( SID_H_ALIGNCELL );
// pseudo slots for Format menu
rBindings.Invalidate( SID_ALIGN_ANY_HDEFAULT );
rBindings.Invalidate( SID_ALIGN_ANY_LEFT );
rBindings.Invalidate( SID_ALIGN_ANY_HCENTER );
rBindings.Invalidate( SID_ALIGN_ANY_RIGHT );
rBindings.Invalidate( SID_ALIGN_ANY_JUSTIFIED );
rBindings.Invalidate( SID_ALIGN_ANY_VDEFAULT );
rBindings.Invalidate( SID_ALIGN_ANY_TOP );
rBindings.Invalidate( SID_ALIGN_ANY_VCENTER );
rBindings.Invalidate( SID_ALIGN_ANY_BOTTOM );
rBindings.Update();
if( ! rReq.IsAPI() )
rReq.Done();
}
void ScFormatShell::ExecuteTextAttr( SfxRequest& rReq )
{
ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell();
SfxBindings& rBindings = pViewData->GetBindings();
const ScPatternAttr* pAttrs = pTabViewShell->GetSelectionPattern();
const SfxItemSet* pSet = rReq.GetArgs();
sal_uInt16 nSlot = rReq.GetSlot();
SfxAllItemSet* pNewSet = 0;
pTabViewShell->HideListBox(); // Autofilter-DropDown-Listbox
if ( (nSlot == SID_ATTR_CHAR_WEIGHT)
||(nSlot == SID_ATTR_CHAR_POSTURE)
||(nSlot == SID_ATTR_CHAR_UNDERLINE)
||(nSlot == SID_ULINE_VAL_NONE)
||(nSlot == SID_ULINE_VAL_SINGLE)
||(nSlot == SID_ULINE_VAL_DOUBLE)
||(nSlot == SID_ULINE_VAL_DOTTED) )
{
pNewSet = new SfxAllItemSet( GetPool() );
switch ( nSlot )
{
case SID_ATTR_CHAR_WEIGHT:
{
// #i78017 establish the same behaviour as in Writer
sal_uInt8 nScript = SCRIPTTYPE_LATIN | SCRIPTTYPE_ASIAN | SCRIPTTYPE_COMPLEX;
SfxItemPool& rPool = GetPool();
SvxScriptSetItem aSetItem( nSlot, rPool );
if ( pSet )
aSetItem.PutItemForScriptType( nScript, pSet->Get( ATTR_FONT_WEIGHT ) );
else
{
// toggle manually
FontWeight eWeight = WEIGHT_BOLD;
SvxScriptSetItem aOldSetItem( nSlot, rPool );
aOldSetItem.GetItemSet().Put( pAttrs->GetItemSet(), sal_False );
const SfxPoolItem* pCore = aOldSetItem.GetItemOfScript( nScript );
if ( pCore && ((const SvxWeightItem*)pCore)->GetWeight() == WEIGHT_BOLD )
eWeight = WEIGHT_NORMAL;
aSetItem.PutItemForScriptType( nScript, SvxWeightItem( eWeight, ATTR_FONT_WEIGHT ) );
}
pTabViewShell->ApplyUserItemSet( aSetItem.GetItemSet() );
pNewSet->Put( aSetItem.GetItemSet(), sal_False );
}
break;
case SID_ATTR_CHAR_POSTURE:
{
// #i78017 establish the same behaviour as in Writer
sal_uInt8 nScript = SCRIPTTYPE_LATIN | SCRIPTTYPE_ASIAN | SCRIPTTYPE_COMPLEX;
SfxItemPool& rPool = GetPool();
SvxScriptSetItem aSetItem( nSlot, rPool );
if ( pSet )
aSetItem.PutItemForScriptType( nScript, pSet->Get( ATTR_FONT_POSTURE ) );
else
{
// toggle manually
FontItalic eItalic = ITALIC_NORMAL;
SvxScriptSetItem aOldSetItem( nSlot, rPool );
aOldSetItem.GetItemSet().Put( pAttrs->GetItemSet(), sal_False );
const SfxPoolItem* pCore = aOldSetItem.GetItemOfScript( nScript );
if ( pCore && ((const SvxPostureItem*)pCore)->GetPosture() == ITALIC_NORMAL )
eItalic = ITALIC_NONE;
aSetItem.PutItemForScriptType( nScript, SvxPostureItem( eItalic, ATTR_FONT_POSTURE ) );
}
pTabViewShell->ApplyUserItemSet( aSetItem.GetItemSet() );
pNewSet->Put( aSetItem.GetItemSet(), sal_False );
}
break;
case SID_ATTR_CHAR_UNDERLINE:
{
FontUnderline eUnderline;
if( pSet )
{
const SfxPoolItem& rUnderline = pSet->Get( ATTR_FONT_UNDERLINE );
if( rUnderline.ISA(SvxUnderlineItem) )
{
pTabViewShell->ApplyAttr( rUnderline );
pNewSet->Put( rUnderline,rUnderline.Which() );
}
else if ( rUnderline.ISA(SvxTextLineItem) )
{
// #i106580# also allow SvxTextLineItem (base class of SvxUnderlineItem)
const SvxTextLineItem& rTextLineItem = static_cast<const SvxTextLineItem&>(rUnderline);
SvxUnderlineItem aNewItem( rTextLineItem.GetLineStyle(), rTextLineItem.Which() );
aNewItem.SetColor( rTextLineItem.GetColor() );
pTabViewShell->ApplyAttr( aNewItem );
pNewSet->Put( aNewItem, aNewItem.Which() );
}
}
else
{
SvxUnderlineItem aUnderline( (const SvxUnderlineItem&)
pAttrs->GetItem(
ATTR_FONT_UNDERLINE ) );
eUnderline = (UNDERLINE_NONE != aUnderline.GetLineStyle())
? UNDERLINE_NONE
: UNDERLINE_SINGLE;
aUnderline.SetLineStyle( eUnderline );
pTabViewShell->ApplyAttr( aUnderline );
pNewSet->Put( aUnderline,aUnderline.Which() );
}
}
break;
case SID_ULINE_VAL_NONE:
pTabViewShell->ApplyAttr( SvxUnderlineItem( UNDERLINE_NONE, ATTR_FONT_UNDERLINE ) );
break;
case SID_ULINE_VAL_SINGLE: // Toggles
case SID_ULINE_VAL_DOUBLE:
case SID_ULINE_VAL_DOTTED:
{
FontUnderline eOld = ((const SvxUnderlineItem&)
pAttrs->GetItem(ATTR_FONT_UNDERLINE)).GetLineStyle();
FontUnderline eNew = eOld;
switch (nSlot)
{
case SID_ULINE_VAL_SINGLE:
eNew = ( eOld == UNDERLINE_SINGLE ) ? UNDERLINE_NONE : UNDERLINE_SINGLE;
break;
case SID_ULINE_VAL_DOUBLE:
eNew = ( eOld == UNDERLINE_DOUBLE ) ? UNDERLINE_NONE : UNDERLINE_DOUBLE;
break;
case SID_ULINE_VAL_DOTTED:
eNew = ( eOld == UNDERLINE_DOTTED ) ? UNDERLINE_NONE : UNDERLINE_DOTTED;
break;
}
pTabViewShell->ApplyAttr( SvxUnderlineItem( eNew, ATTR_FONT_UNDERLINE ) );
}
break;
default:
break;
}
rBindings.Invalidate( nSlot );
}
else
{
/*
* "Selbstgemachte" RadioButton-Funktionalitaet
* Beim Toggle gibt es den Standard-State, d.h. kein
* Button ist gedrueckt
*/
const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet();
const SfxPoolItem* pItem = NULL;
const SvxHorJustifyItem* pHorJustify = NULL;
const SvxVerJustifyItem* pVerJustify = NULL;
SvxCellHorJustify eHorJustify = SVX_HOR_JUSTIFY_STANDARD;
SvxCellVerJustify eVerJustify = SVX_VER_JUSTIFY_STANDARD;
if (rAttrSet.GetItemState(ATTR_HOR_JUSTIFY, sal_True,&pItem ) == SFX_ITEM_SET)
{
pHorJustify = (const SvxHorJustifyItem*)pItem;
eHorJustify = SvxCellHorJustify( pHorJustify->GetValue() );
}
if (rAttrSet.GetItemState(ATTR_VER_JUSTIFY, sal_True,&pItem ) == SFX_ITEM_SET)
{
pVerJustify = (const SvxVerJustifyItem*)pItem;
eVerJustify = SvxCellVerJustify( pVerJustify->GetValue() );
}
switch ( nSlot )
{
case SID_ALIGNLEFT:
rReq.SetSlot( SID_H_ALIGNCELL );
rReq.AppendItem( SvxHorJustifyItem(
!pHorJustify || (eHorJustify != SVX_HOR_JUSTIFY_LEFT) ?
SVX_HOR_JUSTIFY_LEFT : SVX_HOR_JUSTIFY_STANDARD, SID_H_ALIGNCELL ) );
ExecuteSlot( rReq, GetInterface() );
return;
// APPLY_HOR_JUSTIFY( SVX_HOR_JUSTIFY_LEFT );
//break;
case SID_ALIGNRIGHT:
rReq.SetSlot( SID_H_ALIGNCELL );
rReq.AppendItem( SvxHorJustifyItem(
!pHorJustify || (eHorJustify != SVX_HOR_JUSTIFY_RIGHT) ?
SVX_HOR_JUSTIFY_RIGHT : SVX_HOR_JUSTIFY_STANDARD, SID_H_ALIGNCELL ) );
ExecuteSlot( rReq, GetInterface() );
return;
// APPLY_HOR_JUSTIFY( SVX_HOR_JUSTIFY_RIGHT );
//break;
case SID_ALIGNCENTERHOR:
rReq.SetSlot( SID_H_ALIGNCELL );
rReq.AppendItem( SvxHorJustifyItem(
!pHorJustify || (eHorJustify != SVX_HOR_JUSTIFY_CENTER) ?
SVX_HOR_JUSTIFY_CENTER : SVX_HOR_JUSTIFY_STANDARD, SID_H_ALIGNCELL ) );
ExecuteSlot( rReq, GetInterface() );
return;
// APPLY_HOR_JUSTIFY( SVX_HOR_JUSTIFY_CENTER );
//break;
case SID_ALIGNBLOCK:
rReq.SetSlot( SID_H_ALIGNCELL );
rReq.AppendItem( SvxHorJustifyItem(
!pHorJustify || (eHorJustify != SVX_HOR_JUSTIFY_BLOCK) ?
SVX_HOR_JUSTIFY_BLOCK : SVX_HOR_JUSTIFY_STANDARD, SID_H_ALIGNCELL ) );
ExecuteSlot( rReq, GetInterface() );
return;
// APPLY_HOR_JUSTIFY( SVX_HOR_JUSTIFY_BLOCK );
//break;
case SID_ALIGNTOP:
rReq.SetSlot( SID_V_ALIGNCELL );
rReq.AppendItem( SvxVerJustifyItem(
!pVerJustify || (eVerJustify != SVX_VER_JUSTIFY_TOP) ?
SVX_VER_JUSTIFY_TOP : SVX_VER_JUSTIFY_STANDARD, SID_V_ALIGNCELL ) );
ExecuteSlot( rReq, GetInterface() );
return;
// APPLY_VER_JUSTIFY( SVX_VER_JUSTIFY_TOP );
//break;
case SID_ALIGNBOTTOM:
rReq.SetSlot( SID_V_ALIGNCELL );
rReq.AppendItem( SvxVerJustifyItem(
!pVerJustify || (eVerJustify != SVX_VER_JUSTIFY_BOTTOM) ?
SVX_VER_JUSTIFY_BOTTOM : SVX_VER_JUSTIFY_STANDARD, SID_V_ALIGNCELL ) );
ExecuteSlot( rReq, GetInterface() );
return;
// APPLY_VER_JUSTIFY( SVX_VER_JUSTIFY_BOTTOM );
//break;
case SID_ALIGNCENTERVER:
rReq.SetSlot( SID_V_ALIGNCELL );
rReq.AppendItem( SvxVerJustifyItem(
!pVerJustify || (eVerJustify != SVX_VER_JUSTIFY_CENTER) ?
SVX_VER_JUSTIFY_CENTER : SVX_VER_JUSTIFY_STANDARD, SID_V_ALIGNCELL ) );
ExecuteSlot( rReq, GetInterface() );
return;
// APPLY_VER_JUSTIFY( SVX_VER_JUSTIFY_CENTER );
//break;
default:
break;
}
}
rBindings.Update();
// rReq.Done();
if( pNewSet )
{
rReq.Done( *pNewSet );
delete pNewSet;
}
else
{
rReq.Done();
}
}
#undef APPLY_HOR_JUSTIFY
#undef APPLY_VER_JUSTIFY
//------------------------------------------------------------------
void ScFormatShell::ExecuteAttr( SfxRequest& rReq )
{
ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell();
SfxBindings& rBindings = pViewData->GetBindings();
const SfxItemSet* pNewAttrs = rReq.GetArgs();
pTabViewShell->HideListBox(); // Autofilter-DropDown-Listbox
if ( !pNewAttrs )
{
sal_uInt16 nSlot = rReq.GetSlot();
switch ( nSlot )
{
case SID_ATTR_CHAR_FONT:
case SID_ATTR_CHAR_FONTHEIGHT:
pTabViewShell->ExecuteCellFormatDlg( rReq, TP_FONT ); // wenn ToolBar vertikal
break;
case SID_ATTR_ALIGN_LINEBREAK: // ohne Parameter als Toggle
{
const ScPatternAttr* pAttrs = pTabViewShell->GetSelectionPattern();
sal_Bool bOld = ((const SfxBoolItem&)pAttrs->GetItem(ATTR_LINEBREAK)).GetValue();
SfxBoolItem aBreakItem( ATTR_LINEBREAK, !bOld );
pTabViewShell->ApplyAttr( aBreakItem );
SfxAllItemSet aNewSet( GetPool() );
aNewSet.Put( aBreakItem,aBreakItem.Which() );
rReq.Done( aNewSet );
rBindings.Invalidate( nSlot );
}
break;
case SID_BACKGROUND_COLOR:
{
// SID_BACKGROUND_COLOR without arguments -> set transparent background
SvxBrushItem aBrushItem( (const SvxBrushItem&)
pTabViewShell->GetSelectionPattern()->
GetItem( ATTR_BACKGROUND ) );
aBrushItem.SetColor( COL_TRANSPARENT );
pTabViewShell->ApplyAttr( aBrushItem );
}
break;
}
}
else
{
sal_uInt16 nSlot = rReq.GetSlot();
switch ( nSlot )
{
case SID_ATTR_CHAR_OVERLINE:
case SID_ATTR_CHAR_STRIKEOUT:
case SID_ATTR_ALIGN_LINEBREAK:
case SID_ATTR_CHAR_COLOR:
case SID_ATTR_CHAR_CONTOUR:
case SID_ATTR_CHAR_SHADOWED:
case SID_ATTR_CHAR_RELIEF:
case SID_SCATTR_PROTECTION :
pTabViewShell->ApplyAttr( pNewAttrs->Get( pNewAttrs->GetPool()->GetWhich( nSlot ) ) );
rBindings.Invalidate( nSlot );
rBindings.Update( nSlot );
break;
case SID_ATTR_CHAR_FONT:
case SID_ATTR_CHAR_FONTHEIGHT:
{
// #i78017 establish the same behaviour as in Writer
sal_uInt8 nScript = SCRIPTTYPE_LATIN | SCRIPTTYPE_ASIAN | SCRIPTTYPE_COMPLEX;
if (nSlot == SID_ATTR_CHAR_FONT)
nScript = pTabViewShell->GetSelectionScriptType();
SfxItemPool& rPool = GetPool();
SvxScriptSetItem aSetItem( nSlot, rPool );
sal_uInt16 nWhich = rPool.GetWhich( nSlot );
aSetItem.PutItemForScriptType( nScript, pNewAttrs->Get( nWhich ) );
pTabViewShell->ApplyUserItemSet( aSetItem.GetItemSet() );
rBindings.Invalidate( nSlot );
rBindings.Update( nSlot );
}
break;
case SID_FRAME_LINESTYLE:
{
// Default-Linie aktualisieren
const SvxBorderLine* pLine =
((const SvxLineItem&)
pNewAttrs->Get( SID_FRAME_LINESTYLE )).
GetLine();
if ( pLine )
{
SvxBorderLine* pDefLine = pTabViewShell->GetDefaultFrameLine();
if ( pDefLine )
{
pDefLine->SetOutWidth( pLine->GetOutWidth() );
pDefLine->SetInWidth ( pLine->GetInWidth() );
pDefLine->SetDistance( pLine->GetDistance() );
pTabViewShell->SetSelectionFrameLines( pDefLine, sal_False );
}
else
{
pTabViewShell->SetDefaultFrameLine( pLine );
pTabViewShell->GetDefaultFrameLine()->SetColor( COL_BLACK );
pTabViewShell->SetSelectionFrameLines( pLine, sal_False );
}
}
else
{
Color aColorBlack( COL_BLACK );
SvxBorderLine aDefLine( &aColorBlack, 20, 0, 0 );
pTabViewShell->SetDefaultFrameLine( &aDefLine );
pTabViewShell->SetSelectionFrameLines( NULL, sal_False );
}
}
break;
case SID_FRAME_LINECOLOR:
{
SvxBorderLine* pDefLine = pTabViewShell->GetDefaultFrameLine();
const Color& rColor = ((const SvxColorItem&)
pNewAttrs->Get( SID_FRAME_LINECOLOR )).
GetValue();
// Default-Linie aktualisieren
if ( pDefLine )
{
pDefLine->SetColor( rColor );
pTabViewShell->SetSelectionFrameLines( pDefLine, sal_True );
}
else
{
SvxBorderLine aDefLine( &rColor, 20, 0, 0 );
pTabViewShell->SetDefaultFrameLine( &aDefLine );
pTabViewShell->SetSelectionFrameLines( &aDefLine, sal_False );
}
}
break;
case SID_ATTR_BORDER_OUTER:
case SID_ATTR_BORDER:
{
SvxBorderLine* pDefLine = pTabViewShell->GetDefaultFrameLine();
const ScPatternAttr* pOldAttrs = pTabViewShell->GetSelectionPattern();
ScDocument* pDoc = GetViewData()->GetDocument();
SfxItemSet* pOldSet =
new SfxItemSet(
*(pDoc->GetPool()),
ATTR_PATTERN_START,
ATTR_PATTERN_END );
SfxItemSet* pNewSet =
new SfxItemSet(
*(pDoc->GetPool()),
ATTR_PATTERN_START,
ATTR_PATTERN_END );
const SfxPoolItem& rBorderAttr =
pOldAttrs->GetItemSet().
Get( ATTR_BORDER );
// Border-Items vom Controller auswerten:
const SfxPoolItem* pItem = 0;
if ( pNewAttrs->GetItemState( ATTR_BORDER, sal_True, &pItem )
== SFX_ITEM_SET )
{
// #100959# The SvxFrameToolBoxControl toolbox controller uses a default
// SvxBorderLine (all widths 0) to mark the lines that should be set.
// Macro recording uses a SvxBoxItem with the real values (OutWidth > 0)
// or NULL pointers for no lines.
// -> Substitute existing lines with pDefLine only if widths are 0.
SvxBoxItem aBoxItem ( *(const SvxBoxItem*)pItem );
if ( aBoxItem.GetTop() && aBoxItem.GetTop()->GetOutWidth() == 0 )
aBoxItem.SetLine( pDefLine, BOX_LINE_TOP );
if ( aBoxItem.GetBottom() && aBoxItem.GetBottom()->GetOutWidth() == 0 )
aBoxItem.SetLine( pDefLine, BOX_LINE_BOTTOM );
if ( aBoxItem.GetLeft() && aBoxItem.GetLeft()->GetOutWidth() == 0 )
aBoxItem.SetLine( pDefLine, BOX_LINE_LEFT );
if ( aBoxItem.GetRight() && aBoxItem.GetRight()->GetOutWidth() == 0 )
aBoxItem.SetLine( pDefLine, BOX_LINE_RIGHT );
pNewSet->Put( aBoxItem );
rReq.AppendItem( aBoxItem );
}
if ( pNewAttrs->GetItemState( ATTR_BORDER_INNER, sal_True, &pItem )
== SFX_ITEM_SET )
{
SvxBoxInfoItem aBoxInfoItem( *(const SvxBoxInfoItem*)pItem );
if ( aBoxInfoItem.GetHori() && aBoxInfoItem.GetHori()->GetOutWidth() == 0 )
aBoxInfoItem.SetLine( pDefLine, BOXINFO_LINE_HORI );
if ( aBoxInfoItem.GetVert() && aBoxInfoItem.GetVert()->GetOutWidth() == 0 )
aBoxInfoItem.SetLine( pDefLine, BOXINFO_LINE_VERT );
pNewSet->Put( aBoxInfoItem );
rReq.AppendItem( aBoxInfoItem );
}
else
{
SvxBoxInfoItem aBoxInfoItem( ATTR_BORDER_INNER );
aBoxInfoItem.SetLine( NULL, BOXINFO_LINE_HORI );
aBoxInfoItem.SetLine( NULL, BOXINFO_LINE_VERT );
pNewSet->Put( aBoxInfoItem );
}
pOldSet->Put( rBorderAttr );
pTabViewShell->ApplyAttributes( pNewSet, pOldSet );
delete pOldSet;
delete pNewSet;
}
break;
case SID_ATTR_BORDER_DIAG_TLBR:
case SID_ATTR_BORDER_DIAG_BLTR:
{
// ScDocument* pDoc = GetViewData()->GetDocument();
const ScPatternAttr* pOldAttrs = pTabViewShell->GetSelectionPattern();
SfxItemSet* pOldSet = new SfxItemSet(pOldAttrs->GetItemSet());
SfxItemSet* pNewSet = new SfxItemSet(pOldAttrs->GetItemSet());
const SfxPoolItem* pItem = 0;
if(SID_ATTR_BORDER_DIAG_TLBR == nSlot)
{
if(SFX_ITEM_SET == pNewAttrs->GetItemState(ATTR_BORDER_TLBR, true, &pItem))
{
SvxLineItem aItem(ATTR_BORDER_TLBR);
aItem.SetLine(((const SvxLineItem&)pNewAttrs->Get(ATTR_BORDER_TLBR)).GetLine());
pNewSet->Put(aItem);
rReq.AppendItem(aItem);
pTabViewShell->ApplyAttributes(pNewSet, pOldSet);
}
}
else // if( nSlot == SID_ATTR_BORDER_DIAG_BLTR )
{
if(SFX_ITEM_SET == pNewAttrs->GetItemState(ATTR_BORDER_BLTR, true, &pItem ))
{
SvxLineItem aItem(ATTR_BORDER_BLTR);
aItem.SetLine(((const SvxLineItem&)pNewAttrs->Get(ATTR_BORDER_BLTR)).GetLine());
pNewSet->Put(aItem);
rReq.AppendItem(aItem);
pTabViewShell->ApplyAttributes(pNewSet, pOldSet);
}
}
delete pOldSet;
delete pNewSet;
rBindings.Invalidate(nSlot);
}
break;
// ATTR_BACKGROUND (=SID_ATTR_BRUSH) muss ueber zwei IDs
// gesetzt werden:
case SID_BACKGROUND_COLOR:
{
const SvxColorItem rNewColorItem = (const SvxColorItem&)
pNewAttrs->Get( SID_BACKGROUND_COLOR );
SvxBrushItem aBrushItem( (const SvxBrushItem&)
pTabViewShell->GetSelectionPattern()->
GetItem( ATTR_BACKGROUND ) );
aBrushItem.SetColor( rNewColorItem.GetValue() );
pTabViewShell->ApplyAttr( aBrushItem );
}
break;
case SID_ATTR_BRUSH:
{
SvxBrushItem aBrushItem( (const SvxBrushItem&)
pTabViewShell->GetSelectionPattern()->
GetItem( ATTR_BACKGROUND ) );
const SvxBrushItem& rNewBrushItem = (const SvxBrushItem&)
pNewAttrs->Get( GetPool().GetWhich(nSlot) );
aBrushItem.SetColor(rNewBrushItem.GetColor());
pTabViewShell->ApplyAttr( aBrushItem );
}
break;
case SID_ATTR_BORDER_SHADOW:
{
const SvxShadowItem& rNewShadowItem = (const SvxShadowItem&)
pNewAttrs->Get( ATTR_SHADOW );
pTabViewShell->ApplyAttr( rNewShadowItem );
}
break;
default:
break;
}
if( ! rReq.IsAPI() )
if( ! rReq.IsDone() )
rReq.Done();
}
}
void ScFormatShell::GetAttrState( SfxItemSet& rSet )
{
ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell();
const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet();
// const SvxBorderLine* pLine = pTabViewShell->GetDefaultFrameLine();
const SvxBrushItem& rBrushItem = (const SvxBrushItem&)rAttrSet.Get( ATTR_BACKGROUND );
SfxWhichIter aIter( rSet );
sal_uInt16 nWhich = aIter.FirstWhich();
rSet.Put( rAttrSet, sal_False );
// choose font info according to selection script type
sal_uInt8 nScript = 0; // GetSelectionScriptType never returns 0
if ( rSet.GetItemState( ATTR_FONT ) != SFX_ITEM_UNKNOWN )
{
if (!nScript) nScript = pTabViewShell->GetSelectionScriptType();
ScViewUtil::PutItemScript( rSet, rAttrSet, ATTR_FONT, nScript );
}
if ( rSet.GetItemState( ATTR_FONT_HEIGHT ) != SFX_ITEM_UNKNOWN )
{
if (!nScript) nScript = pTabViewShell->GetSelectionScriptType();
ScViewUtil::PutItemScript( rSet, rAttrSet, ATTR_FONT_HEIGHT, nScript );
}
while ( nWhich )
{
switch(nWhich)
{
case SID_BACKGROUND_COLOR:
{
rSet.Put( SvxColorItem( rBrushItem.GetColor(), SID_BACKGROUND_COLOR ) );
if(SFX_ITEM_DONTCARE == rAttrSet.GetItemState(ATTR_BACKGROUND))
{
rSet.InvalidateItem(SID_BACKGROUND_COLOR);
}
}
break;
case SID_FRAME_LINESTYLE:
case SID_FRAME_LINECOLOR:
{
// handled together because both need the cell border information for decisions
// rSet.Put( SvxColorItem( pLine ? pLine->GetColor() : Color(), SID_FRAME_LINECOLOR ) );
Color aCol = 0;
// sal_uInt16 nOut = 0, nIn = 0, nDis = 0;
SvxBorderLine aLine(0,0,0,0);
bool bCol = 0;
bool bColDisable = 0, bStyleDisable = 0;
SvxBoxItem aBoxItem(ATTR_BORDER);
SvxBoxInfoItem aInfoItem(ATTR_BORDER_INNER);
pTabViewShell->GetSelectionFrame(aBoxItem, aInfoItem);
if( aBoxItem.GetTop() )
{
bCol = 1;
aCol = aBoxItem.GetTop()->GetColor() ;
aLine.SetColor(aCol);
aLine.SetOutWidth( aBoxItem.GetTop()->GetOutWidth());
aLine.SetInWidth( aBoxItem.GetTop()->GetInWidth());
aLine.SetDistance( aBoxItem.GetTop()->GetDistance());
}
if( aBoxItem.GetBottom() )
{
if(bCol == 0)
{
bCol = 1;
aCol = aBoxItem.GetBottom()->GetColor() ;
aLine.SetColor(aCol);
aLine.SetOutWidth( aBoxItem.GetBottom()->GetOutWidth());
aLine.SetInWidth( aBoxItem.GetBottom()->GetInWidth());
aLine.SetDistance( aBoxItem.GetBottom()->GetDistance());
}
else
{
if(aCol != aBoxItem.GetBottom()->GetColor() )
bColDisable = 1;
if(!( aLine == *(aBoxItem.GetBottom())) )
bStyleDisable = 1;
}
}
if( aBoxItem.GetLeft() )
{
if(bCol == 0)
{
bCol = 1;
aCol = aBoxItem.GetLeft()->GetColor() ;
aLine.SetColor(aCol);
aLine.SetOutWidth( aBoxItem.GetLeft()->GetOutWidth());
aLine.SetInWidth( aBoxItem.GetLeft()->GetInWidth());
aLine.SetDistance( aBoxItem.GetLeft()->GetDistance());
}
else
{
if(aCol != aBoxItem.GetLeft()->GetColor() )
bColDisable = 1;
if(!( aLine == *(aBoxItem.GetLeft())) )
bStyleDisable = 1;
}
}
if( aBoxItem.GetRight() )
{
if(bCol == 0)
{
bCol = 1;
aCol = aBoxItem.GetRight()->GetColor() ;
aLine.SetColor(aCol);
aLine.SetOutWidth( aBoxItem.GetRight()->GetOutWidth());
aLine.SetInWidth( aBoxItem.GetRight()->GetInWidth());
aLine.SetDistance( aBoxItem.GetRight()->GetDistance());
}
else
{
if(aCol != aBoxItem.GetRight()->GetColor() )
bColDisable = 1;
if(!( aLine == *(aBoxItem.GetRight())) )
bStyleDisable = 1;
}
}
if( aInfoItem.GetVert())
{
if(bCol == 0)
{
bCol = 1;
aCol = aInfoItem.GetVert()->GetColor() ;
aLine.SetColor(aCol);
aLine.SetOutWidth( aInfoItem.GetVert()->GetOutWidth());
aLine.SetInWidth( aInfoItem.GetVert()->GetInWidth());
aLine.SetDistance( aInfoItem.GetVert()->GetDistance());
}
else
{
if(aCol != aInfoItem.GetVert()->GetColor() )
bColDisable = 1;
if(!( aLine == *(aInfoItem.GetVert())) )
bStyleDisable = 1;
}
}
if( aInfoItem.GetHori())
{
if(bCol == 0)
{
bCol = 1;
aCol = aInfoItem.GetHori()->GetColor() ;
aLine.SetColor(aCol);
aLine.SetOutWidth( aInfoItem.GetHori()->GetOutWidth());
aLine.SetInWidth( aInfoItem.GetHori()->GetInWidth());
aLine.SetDistance( aInfoItem.GetHori()->GetDistance());
}
else
{
if(aCol != aInfoItem.GetHori()->GetColor() )
bColDisable = 1;
if(!( aLine == *(aInfoItem.GetHori())) )
bStyleDisable = 1;
}
}
if( !aInfoItem.IsValid( VALID_VERT )
|| !aInfoItem.IsValid( VALID_HORI )
|| !aInfoItem.IsValid( VALID_LEFT )
|| !aInfoItem.IsValid( VALID_RIGHT )
|| !aInfoItem.IsValid( VALID_TOP )
|| !aInfoItem.IsValid( VALID_BOTTOM ) )
{
bColDisable = 1;
bStyleDisable = 1;
}
if(SID_FRAME_LINECOLOR == nWhich)
{
if(bColDisable) // if different lines have differernt colors
{
aCol = COL_TRANSPARENT;
rSet.Put( SvxColorItem(aCol, SID_FRAME_LINECOLOR ) );
rSet.InvalidateItem(SID_FRAME_LINECOLOR);
}
else if( bCol == 0 && bColDisable == 0) // if no line available
{
aCol = COL_AUTO;
rSet.Put( SvxColorItem(aCol, SID_FRAME_LINECOLOR ) );
}
else
rSet.Put( SvxColorItem(aCol, SID_FRAME_LINECOLOR ) );
}
else // if( nWhich == SID_FRAME_LINESTYLE)
{
if(bStyleDisable) // if have several lines but don't have same style
{
aLine.SetOutWidth( 1 );
aLine.SetInWidth( 0 );
aLine.SetDistance( 0 );
SvxLineItem aItem(SID_FRAME_LINESTYLE);
aItem.SetLine(&aLine);
rSet.Put( aItem );
rSet.InvalidateItem(SID_FRAME_LINESTYLE);
}
else // all the lines have same style or no line available, use initial value (0,0,0,0)
{
SvxLineItem aItem(SID_FRAME_LINESTYLE);
aItem.SetLine(&aLine);
rSet.Put( aItem );
}
}
}
break;
case SID_ATTR_BRUSH:
{
rSet.Put( rBrushItem, GetPool().GetWhich(nWhich) );
}
break;
}
nWhich = aIter.NextWhich();
}
// stuff for sidebar panels
Invalidate(SID_ATTR_ALIGN_DEGREES);
Invalidate(SID_ATTR_ALIGN_STACKED);
}
//------------------------------------------------------------------
void ScFormatShell::GetTextAttrState( SfxItemSet& rSet )
{
ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell();
const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet();
rSet.Put( rAttrSet, sal_False ); // ItemStates mitkopieren
// choose font info according to selection script type
sal_uInt8 nScript = 0; // GetSelectionScriptType never returns 0
if ( rSet.GetItemState( ATTR_FONT_WEIGHT ) != SFX_ITEM_UNKNOWN )
{
if (!nScript) nScript = pTabViewShell->GetSelectionScriptType();
ScViewUtil::PutItemScript( rSet, rAttrSet, ATTR_FONT_WEIGHT, nScript );
}
if ( rSet.GetItemState( ATTR_FONT_POSTURE ) != SFX_ITEM_UNKNOWN )
{
if (!nScript) nScript = pTabViewShell->GetSelectionScriptType();
ScViewUtil::PutItemScript( rSet, rAttrSet, ATTR_FONT_POSTURE, nScript );
}
SfxItemState eState;
// const SfxPoolItem* pItem;
//--------------------------------------------------------------------
// eigene Kontrolle ueber RadioButton-Funktionalitaet:
//--------------------------------------------------------------------
// Unterstreichung
//------------------------
eState = rAttrSet.GetItemState( ATTR_FONT_UNDERLINE, sal_True );
if ( eState == SFX_ITEM_DONTCARE )
{
rSet.InvalidateItem( SID_ULINE_VAL_NONE );
rSet.InvalidateItem( SID_ULINE_VAL_SINGLE );
rSet.InvalidateItem( SID_ULINE_VAL_DOUBLE );
rSet.InvalidateItem( SID_ULINE_VAL_DOTTED );
}
else
{
FontUnderline eUnderline = ((const SvxUnderlineItem&)
rAttrSet.Get(ATTR_FONT_UNDERLINE)).GetLineStyle();
sal_uInt16 nId = SID_ULINE_VAL_NONE;
switch (eUnderline)
{
case UNDERLINE_SINGLE: nId = SID_ULINE_VAL_SINGLE; break;
case UNDERLINE_DOUBLE: nId = SID_ULINE_VAL_DOUBLE; break;
case UNDERLINE_DOTTED: nId = SID_ULINE_VAL_DOTTED; break;
default:
break;
}
rSet.Put( SfxBoolItem( nId, sal_True ) );
}
//------------------------
// horizontale Ausrichtung
//------------------------
const SvxHorJustifyItem* pHorJustify = NULL;
const SvxVerJustifyItem* pVerJustify = NULL;
SvxCellHorJustify eHorJustify = SVX_HOR_JUSTIFY_STANDARD;
SvxCellVerJustify eVerJustify = SVX_VER_JUSTIFY_STANDARD;
sal_uInt16 nWhich = 0;
sal_Bool bJustifyStd = sal_False;
SfxBoolItem aBoolItem ( 0, sal_True );
eState = rAttrSet.GetItemState( ATTR_HOR_JUSTIFY, sal_True,
(const SfxPoolItem**)&pHorJustify );
switch ( eState )
{
case SFX_ITEM_SET:
{
eHorJustify = SvxCellHorJustify( pHorJustify->GetValue() );
switch ( SvxCellHorJustify( pHorJustify->GetValue() ) )
{
case SVX_HOR_JUSTIFY_STANDARD:
break;
case SVX_HOR_JUSTIFY_LEFT:
nWhich = SID_ALIGNLEFT;
break;
case SVX_HOR_JUSTIFY_RIGHT:
nWhich = SID_ALIGNRIGHT;
break;
case SVX_HOR_JUSTIFY_CENTER:
nWhich = SID_ALIGNCENTERHOR;
break;
case SVX_HOR_JUSTIFY_BLOCK:
nWhich = SID_ALIGNBLOCK;
break;
case SVX_HOR_JUSTIFY_REPEAT:
default:
bJustifyStd = sal_True;
break;
}
}
break;
case SFX_ITEM_DONTCARE:
rSet.InvalidateItem( SID_ALIGNLEFT );
rSet.InvalidateItem( SID_ALIGNRIGHT );
rSet.InvalidateItem( SID_ALIGNCENTERHOR );
rSet.InvalidateItem( SID_ALIGNBLOCK );
break;
default:
bJustifyStd = sal_True;
break;
}
if ( nWhich )
{
aBoolItem.SetWhich( nWhich );
rSet.Put( aBoolItem );
}
else if ( bJustifyStd )
{
aBoolItem.SetValue( sal_False );
aBoolItem.SetWhich( SID_ALIGNLEFT ); rSet.Put( aBoolItem );
aBoolItem.SetWhich( SID_ALIGNRIGHT ); rSet.Put( aBoolItem );
aBoolItem.SetWhich( SID_ALIGNCENTERHOR ); rSet.Put( aBoolItem );
aBoolItem.SetWhich( SID_ALIGNBLOCK ); rSet.Put( aBoolItem );
bJustifyStd = sal_False;
}
//------------------------
// vertikale Ausrichtung
//------------------------
nWhich = 0;
aBoolItem.SetValue( sal_True );
eState = rAttrSet.GetItemState( ATTR_VER_JUSTIFY, sal_True,
(const SfxPoolItem**)&pVerJustify );
switch ( eState )
{
case SFX_ITEM_SET:
{
eVerJustify = SvxCellVerJustify( pVerJustify->GetValue() );
switch ( eVerJustify )
{
case SVX_VER_JUSTIFY_TOP:
nWhich = SID_ALIGNTOP;
break;
case SVX_VER_JUSTIFY_BOTTOM:
nWhich = SID_ALIGNBOTTOM;
break;
case SVX_VER_JUSTIFY_CENTER:
nWhich = SID_ALIGNCENTERVER;
break;
case SVX_VER_JUSTIFY_STANDARD:
default:
bJustifyStd = sal_True;
break;
}
}
break;
case SFX_ITEM_DONTCARE:
rSet.InvalidateItem( SID_ALIGNTOP );
rSet.InvalidateItem( SID_ALIGNBOTTOM );
rSet.InvalidateItem( SID_ALIGNCENTERVER );
break;
default:
bJustifyStd = sal_True;
break;
}
if ( nWhich )
{
aBoolItem.SetWhich( nWhich );
rSet.Put( aBoolItem );
}
else if ( bJustifyStd )
{
aBoolItem.SetValue( sal_False );
aBoolItem.SetWhich( SID_ALIGNTOP ); rSet.Put( aBoolItem );
aBoolItem.SetWhich( SID_ALIGNBOTTOM ); rSet.Put( aBoolItem );
aBoolItem.SetWhich( SID_ALIGNCENTERVER ); rSet.Put( aBoolItem );
}
}
//------------------------------------------------------------------
void ScFormatShell::GetBorderState( SfxItemSet& rSet )
{
ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell();
SvxBoxItem aBoxItem( ATTR_BORDER );
SvxBoxInfoItem aInfoItem( ATTR_BORDER_INNER );
pTabViewShell->GetSelectionFrame( aBoxItem, aInfoItem );
if ( rSet.GetItemState( ATTR_BORDER ) != SFX_ITEM_UNKNOWN )
rSet.Put( aBoxItem );
if ( rSet.GetItemState( ATTR_BORDER_INNER ) != SFX_ITEM_UNKNOWN )
rSet.Put( aInfoItem );
}
//------------------------------------------------------------------
void ScFormatShell::GetAlignState( SfxItemSet& rSet )
{
ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell();
const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet();
SfxWhichIter aIter(rSet);
sal_uInt16 nWhich = aIter.FirstWhich();
SvxCellHorJustify eHAlign = SVX_HOR_JUSTIFY_STANDARD;
bool bHasHAlign = rAttrSet.GetItemState( ATTR_HOR_JUSTIFY ) != SFX_ITEM_DONTCARE;
if( bHasHAlign )
eHAlign = (SvxCellHorJustify)((const SvxHorJustifyItem&) rAttrSet.Get( ATTR_HOR_JUSTIFY )).GetValue();
SvxCellVerJustify eVAlign = SVX_VER_JUSTIFY_STANDARD;
bool bHasVAlign = rAttrSet.GetItemState( ATTR_VER_JUSTIFY ) != SFX_ITEM_DONTCARE;
if( bHasVAlign )
eVAlign = (SvxCellVerJustify)((const SvxVerJustifyItem&) rAttrSet.Get( ATTR_VER_JUSTIFY )).GetValue();
while ( nWhich )
{
switch ( nWhich )
{
case SID_H_ALIGNCELL:
if ( bHasHAlign )
rSet.Put( SvxHorJustifyItem( eHAlign, nWhich ));
break;
case SID_V_ALIGNCELL:
if ( bHasVAlign )
rSet.Put( SvxVerJustifyItem( eVAlign, nWhich ));
break;
// pseudo slots for Format menu
case SID_ALIGN_ANY_HDEFAULT:
case SID_ALIGN_ANY_LEFT:
case SID_ALIGN_ANY_HCENTER:
case SID_ALIGN_ANY_RIGHT:
case SID_ALIGN_ANY_JUSTIFIED:
rSet.Put( SfxBoolItem( nWhich, bHasHAlign && (eHAlign == lclConvertSlotToHAlign( nWhich )) ) );
break;
case SID_ALIGN_ANY_VDEFAULT:
case SID_ALIGN_ANY_TOP:
case SID_ALIGN_ANY_VCENTER:
case SID_ALIGN_ANY_BOTTOM:
rSet.Put( SfxBoolItem( nWhich, bHasVAlign && (eVAlign == lclConvertSlotToVAlign( nWhich )) ) );
break;
}
nWhich = aIter.NextWhich();
}
}
void ScFormatShell::GetNumFormatState( SfxItemSet& rSet )
{
ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell();
// ScViewData* pViewData = GetViewData();
ScDocument* pDoc = pViewData->GetDocument();
SfxWhichIter aIter(rSet);
sal_uInt16 nWhich = aIter.FirstWhich();
while ( nWhich )
{
switch ( nWhich )
{
case SID_NUMBER_FORMAT:
//{
// String aFormatCode; // bleibt leer, wenn dont-care
//
// const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet();
// if ( rAttrSet.GetItemState( ATTR_VALUE_FORMAT ) != SFX_ITEM_DONTCARE )
// {
// sal_uLong nNumberFormat = ((const SfxUInt32Item&)rAttrSet.Get(
// ATTR_VALUE_FORMAT )).GetValue();
//
// SvNumberFormatter* pFormatter = pDoc->GetFormatTable();
// const SvNumberformat* pFormatEntry = pFormatter->GetEntry( nNumberFormat );
// if ( pFormatEntry )
// aFormatCode = pFormatEntry->GetFormatstring();
// }
//
// rSet.Put( SfxStringItem( nWhich, aFormatCode ) );
//}
// symphony version with format interpretation
{
const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet();
if(SFX_ITEM_DONTCARE != rAttrSet.GetItemState(ATTR_VALUE_FORMAT))
{
SvNumberFormatter* pFormatter = pDoc->GetFormatTable();
sal_uInt32 nNumberFormat = ((const SfxUInt32Item&)rAttrSet.Get(ATTR_VALUE_FORMAT)).GetValue();
sal_Bool bThousand(false);
sal_Bool bNegRed(false);
sal_uInt16 nPrecision(0);
sal_uInt16 nLeadZeroes(0);
pFormatter->GetFormatSpecialInfo(nNumberFormat,bThousand, bNegRed, nPrecision, nLeadZeroes);
String aFormat;
static String sBreak = String::CreateFromAscii(",");
const String sThousand = String::CreateFromInt32(bThousand);
const String sNegRed = String::CreateFromInt32(bNegRed);
const String sPrecision = String::CreateFromInt32(nPrecision);
const String sLeadZeroes = String::CreateFromInt32(nLeadZeroes);
aFormat += sThousand;
aFormat += sBreak;
aFormat += sNegRed;
aFormat += sBreak;
aFormat += sPrecision;
aFormat += sBreak;
aFormat += sLeadZeroes;
aFormat += sBreak;
rSet.Put(SfxStringItem(nWhich, aFormat));
}
else
{
rSet.InvalidateItem( nWhich );
}
}
break;
case SID_NUMBER_TYPE_FORMAT:
{
sal_Int16 aFormatCode = -1;
const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet();
if ( rAttrSet.GetItemState( ATTR_VALUE_FORMAT ) >= SFX_ITEM_AVAILABLE ) //Modify for more robust
{
SvNumberFormatter* pFormatter = pDoc->GetFormatTable();
sal_uInt32 nNumberFormat = pTabViewShell->GetSelectionPattern()->GetNumberFormat( pFormatter );
const SvNumberformat* pFormatEntry = pFormatter->GetEntry( nNumberFormat );
bool bStandard = false;
if ( pFormatEntry )
{
aFormatCode = pFormatEntry->GetType();
bStandard = pFormatEntry->IsStandard();
}
switch(aFormatCode)
{
case NUMBERFORMAT_NUMBER:
case NUMBERFORMAT_NUMBER| NUMBERFORMAT_DEFINED:
//use format code and standard format code to judge whether it is General,
//if (nNumberFormat == nStandardNumberFormat)
if (bStandard)
aFormatCode = 0;
else
aFormatCode = 1;
break;
case NUMBERFORMAT_PERCENT:
case NUMBERFORMAT_PERCENT| NUMBERFORMAT_DEFINED:
aFormatCode = 2;
break;
case NUMBERFORMAT_CURRENCY:
case NUMBERFORMAT_CURRENCY| NUMBERFORMAT_DEFINED:
aFormatCode = 3;
break;
case NUMBERFORMAT_DATE:
case NUMBERFORMAT_DATE| NUMBERFORMAT_DEFINED:
//Add
case NUMBERFORMAT_DATETIME:
case NUMBERFORMAT_DATETIME | NUMBERFORMAT_DEFINED:
aFormatCode = 4;
break;
case NUMBERFORMAT_TIME:
case NUMBERFORMAT_TIME| NUMBERFORMAT_DEFINED:
aFormatCode = 5;
break;
case NUMBERFORMAT_SCIENTIFIC:
case NUMBERFORMAT_SCIENTIFIC| NUMBERFORMAT_DEFINED:
aFormatCode = 6;
break;
case NUMBERFORMAT_FRACTION:
case NUMBERFORMAT_FRACTION| NUMBERFORMAT_DEFINED:
aFormatCode = 7;
break;
case NUMBERFORMAT_LOGICAL:
case NUMBERFORMAT_LOGICAL| NUMBERFORMAT_DEFINED:
aFormatCode = 8;
break;
case NUMBERFORMAT_TEXT:
case NUMBERFORMAT_TEXT| NUMBERFORMAT_DEFINED:
aFormatCode = 9;
break;
default:
aFormatCode = -1; //for more roburst
}
if( aFormatCode == -1 )
rSet.InvalidateItem( nWhich );
else
rSet.Put( SfxInt16Item( nWhich, aFormatCode ) );
}
else
{
rSet.InvalidateItem( nWhich );
}
}
break;
}
nWhich = aIter.NextWhich();
}
}
void ScFormatShell::ExecuteTextDirection( SfxRequest& rReq )
{
ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell();
pTabViewShell->HideListBox(); // Autofilter-DropDown-Listbox
if ( GetViewData()->HasEditView( GetViewData()->GetActivePart() ) )
{
SC_MOD()->InputEnterHandler();
pTabViewShell->UpdateInputHandler();
}
sal_uInt16 nSlot = rReq.GetSlot();
switch( nSlot )
{
case SID_TEXTDIRECTION_LEFT_TO_RIGHT:
case SID_TEXTDIRECTION_TOP_TO_BOTTOM:
{
sal_Bool bVert = (nSlot == SID_TEXTDIRECTION_TOP_TO_BOTTOM);
ScPatternAttr aAttr( GetViewData()->GetDocument()->GetPool() );
SfxItemSet& rItemSet = aAttr.GetItemSet();
rItemSet.Put( SfxBoolItem( ATTR_STACKED, bVert ) );
rItemSet.Put( SfxBoolItem( ATTR_VERTICAL_ASIAN, bVert ) );
pTabViewShell->ApplySelectionPattern( aAttr );
pTabViewShell->AdjustBlockHeight();
}
break;
case SID_ATTR_PARA_LEFT_TO_RIGHT:
case SID_ATTR_PARA_RIGHT_TO_LEFT:
{
SvxFrameDirection eDirection = ( nSlot == SID_ATTR_PARA_LEFT_TO_RIGHT ) ?
FRMDIR_HORI_LEFT_TOP : FRMDIR_HORI_RIGHT_TOP;
pTabViewShell->ApplyAttr( SvxFrameDirectionItem( eDirection, ATTR_WRITINGDIR ) );
}
break;
}
}
void ScFormatShell::GetTextDirectionState( SfxItemSet& rSet )
{
ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell();
const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet();
sal_Bool bVertDontCare =
(rAttrSet.GetItemState( ATTR_VERTICAL_ASIAN ) == SFX_ITEM_DONTCARE) ||
(rAttrSet.GetItemState( ATTR_STACKED ) == SFX_ITEM_DONTCARE);
sal_Bool bLeftRight = !bVertDontCare &&
!((const SfxBoolItem&) rAttrSet.Get( ATTR_STACKED )).GetValue();
sal_Bool bTopBottom = !bVertDontCare && !bLeftRight &&
((const SfxBoolItem&) rAttrSet.Get( ATTR_VERTICAL_ASIAN )).GetValue();
sal_Bool bBidiDontCare = (rAttrSet.GetItemState( ATTR_WRITINGDIR ) == SFX_ITEM_DONTCARE);
EEHorizontalTextDirection eBidiDir = EE_HTEXTDIR_DEFAULT;
if ( !bBidiDontCare )
{
SvxFrameDirection eCellDir = (SvxFrameDirection)((const SvxFrameDirectionItem&)
rAttrSet.Get( ATTR_WRITINGDIR )).GetValue();
if ( eCellDir == FRMDIR_ENVIRONMENT )
eBidiDir = (EEHorizontalTextDirection)GetViewData()->GetDocument()->
GetEditTextDirection( GetViewData()->GetTabNo() );
else if ( eCellDir == FRMDIR_HORI_RIGHT_TOP )
eBidiDir = EE_HTEXTDIR_R2L;
else
eBidiDir = EE_HTEXTDIR_L2R;
}
SvtLanguageOptions aLangOpt;
sal_Bool bDisableCTLFont = !aLangOpt.IsCTLFontEnabled();
sal_Bool bDisableVerticalText = !aLangOpt.IsVerticalTextEnabled();
SfxWhichIter aIter( rSet );
sal_uInt16 nWhich = aIter.FirstWhich();
while( nWhich )
{
switch( nWhich )
{
case SID_TEXTDIRECTION_LEFT_TO_RIGHT:
case SID_TEXTDIRECTION_TOP_TO_BOTTOM:
if ( bDisableVerticalText )
rSet.DisableItem( nWhich );
else
{
if( bVertDontCare )
rSet.InvalidateItem( nWhich );
else if ( nWhich == SID_TEXTDIRECTION_LEFT_TO_RIGHT )
rSet.Put( SfxBoolItem( nWhich, bLeftRight ) );
else
rSet.Put( SfxBoolItem( nWhich, bTopBottom ) );
}
break;
case SID_ATTR_PARA_LEFT_TO_RIGHT:
case SID_ATTR_PARA_RIGHT_TO_LEFT:
if ( bDisableCTLFont )
rSet.DisableItem( nWhich );
else
{
if ( bTopBottom )
rSet.DisableItem( nWhich );
else if ( bBidiDontCare )
rSet.InvalidateItem( nWhich );
else if ( nWhich == SID_ATTR_PARA_LEFT_TO_RIGHT )
rSet.Put( SfxBoolItem( nWhich, eBidiDir == EE_HTEXTDIR_L2R ) );
else
rSet.Put( SfxBoolItem( nWhich, eBidiDir == EE_HTEXTDIR_R2L ) );
}
}
nWhich = aIter.NextWhich();
}
}
void ScFormatShell::ExecFormatPaintbrush( SfxRequest& rReq )
{
ScViewFunc* pView = pViewData->GetView();
if ( pView->HasPaintBrush() )
{
// cancel paintbrush mode
pView->ResetBrushDocument();
}
else
{
sal_Bool bLock = sal_False;
const SfxItemSet *pArgs = rReq.GetArgs();
if( pArgs && pArgs->Count() >= 1 )
bLock = static_cast<const SfxBoolItem&>(pArgs->Get(SID_FORMATPAINTBRUSH)).GetValue();
// in case of multi selection, deselect all and use the cursor position
ScRange aDummy;
if ( pViewData->GetSimpleArea(aDummy) != SC_MARK_SIMPLE )
pView->Unmark();
ScDocument* pBrushDoc = new ScDocument( SCDOCMODE_CLIP );
pView->CopyToClip( pBrushDoc, sal_False, sal_True );
pView->SetBrushDocument( pBrushDoc, bLock );
}
}
void ScFormatShell::StateFormatPaintbrush( SfxItemSet& rSet )
{
if ( pViewData->HasEditView( pViewData->GetActivePart() ) )
rSet.DisableItem( SID_FORMATPAINTBRUSH );
else
rSet.Put( SfxBoolItem( SID_FORMATPAINTBRUSH, pViewData->GetView()->HasPaintBrush() ) );
}
void ScFormatShell::ExecViewOptions( SfxRequest& rReq )
{
ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell();
SfxBindings& rBindings = pViewData->GetBindings();
const SfxItemSet* pNewAttrs = rReq.GetArgs();
if ( pNewAttrs )
{
sal_uInt16 nSlot = rReq.GetSlot();
if( nSlot == SID_SCGRIDSHOW)
{
ScViewData* pViewData = pTabViewShell->GetViewData();
const ScViewOptions& rOldOpt = pViewData->GetOptions();
ScDocShell* pDocSh = PTR_CAST(ScDocShell, SfxObjectShell::Current());
bool bState = ((const SfxBoolItem &)pNewAttrs->Get( pNewAttrs->GetPool()->GetWhich( nSlot ) )).GetValue();
if ( (bool)rOldOpt.GetOption( VOPT_GRID ) != bState)
{
ScViewOptions rNewOpt(rOldOpt);
rNewOpt.SetOption( VOPT_GRID, bState);
pViewData->SetOptions( rNewOpt );
pViewData->GetDocument()->SetViewOptions( rNewOpt );
pDocSh->SetDocumentModified();
//add , write the change to sc view config
ScModule* pScMod = SC_MOD();
pScMod->SetViewOptions( rNewOpt );
//add end
rBindings.Invalidate( nSlot );
}
}
}
}
void ScFormatShell::GetViewOptions( SfxItemSet& rSet )
{
ScTabViewShell* pTabViewShell = GetViewData()->GetViewShell();
if( pTabViewShell )
{
ScViewOptions aViewOpt = pTabViewShell->GetViewData()->GetOptions();
rSet.ClearItem(SID_SCGRIDSHOW);
SfxBoolItem aItem( SID_SCGRIDSHOW, aViewOpt.GetOption( VOPT_GRID ) );
rSet.Put(aItem);
}
}
// eof