/************************************************************** * * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. * *************************************************************/ // MARKER(update_precomp.py): autogen include statement, do not remove #include "precompiled_svx.hxx" #include #include "svx/unoapi.hxx" #include #include #include #include #include #include #include #include #include #include #include #include #include "unopolyhelper.hxx" #include #include #include #include #include // FRound #include #include #include #include #include #include "svx/svditer.hxx" #include #include #include #include // NotPersistItems #include // #32383# Die Verbinder nach Move nochmal anbroadcasten #include "svx/svdglob.hxx" // StringCache #include "svx/svdstr.hrc" // Objektname #include #include "editeng/editstat.hxx" #include #include #include #include "../svx/EnhancedCustomShapeGeometry.hxx" #include "../svx/EnhancedCustomShapeTypeNames.hxx" #include "../svx/EnhancedCustomShape2d.hxx" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include // #104018# replace macros above with type-safe methods inline double ImplTwipsToMM(double fVal) { return (fVal * (127.0 / 72.0)); } inline double ImplMMToTwips(double fVal) { return (fVal * (72.0 / 127.0)); } using namespace ::com::sun::star; using namespace ::com::sun::star::uno; using namespace ::com::sun::star::lang; using namespace ::com::sun::star::beans; using namespace ::com::sun::star::drawing; static MSO_SPT ImpGetCustomShapeType( const SdrObjCustomShape& rCustoShape ) { MSO_SPT eRetValue = mso_sptNil; rtl::OUString aEngine( ( (SdrCustomShapeEngineItem&)rCustoShape.GetMergedItem( SDRATTR_CUSTOMSHAPE_ENGINE ) ).GetValue() ); if ( !aEngine.getLength() || aEngine.equalsAscii( "com.sun.star.drawing.EnhancedCustomShapeEngine" ) ) { rtl::OUString sShapeType; const rtl::OUString sType( RTL_CONSTASCII_USTRINGPARAM ( "Type" ) ); SdrCustomShapeGeometryItem& rGeometryItem( (SdrCustomShapeGeometryItem&)rCustoShape.GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ); Any* pAny = rGeometryItem.GetPropertyValueByName( sType ); if ( pAny && ( *pAny >>= sShapeType ) ) eRetValue = EnhancedCustomShapeTypeNames::Get( sShapeType ); } return eRetValue; }; static sal_Bool ImpVerticalSwitch( const SdrObjCustomShape& rCustoShape ) { sal_Bool bRet = sal_False; MSO_SPT eShapeType( ImpGetCustomShapeType( rCustoShape ) ); switch( eShapeType ) { case mso_sptAccentBorderCallout90 : // 2 ortho case mso_sptBorderCallout1 : // 2 diag case mso_sptBorderCallout2 : // 3 { bRet = sal_True; } break; /* case mso_sptCallout1 : case mso_sptAccentCallout1 : case mso_sptAccentBorderCallout1 : case mso_sptBorderCallout90 : case mso_sptCallout90 : case mso_sptAccentCallout90 : case mso_sptCallout2 : case mso_sptCallout3 : case mso_sptAccentCallout2 : case mso_sptAccentCallout3 : case mso_sptBorderCallout3 : case mso_sptAccentBorderCallout2 : case mso_sptAccentBorderCallout3 : */ default: break; } return bRet; } //////////////////////////////////////////////////////////////////////////////////////////////////// // #i37011# create a clone with all attributes changed to shadow attributes // and translation executed, too. SdrObject* ImpCreateShadowObjectClone(const SdrObject& rOriginal, const SfxItemSet& rOriginalSet) { SdrObject* pRetval = 0L; const sal_Bool bShadow(((SdrShadowItem&)rOriginalSet.Get(SDRATTR_SHADOW)).GetValue()); if(bShadow) { // create a shadow representing object const sal_Int32 nXDist(((SdrShadowXDistItem&)(rOriginalSet.Get(SDRATTR_SHADOWXDIST))).GetValue()); const sal_Int32 nYDist(((SdrShadowYDistItem&)(rOriginalSet.Get(SDRATTR_SHADOWYDIST))).GetValue()); const ::Color aShadowColor(((SdrShadowColorItem&)(rOriginalSet.Get(SDRATTR_SHADOWCOLOR))).GetColorValue()); const sal_uInt16 nShadowTransparence(((SdrShadowTransparenceItem&)(rOriginalSet.Get(SDRATTR_SHADOWTRANSPARENCE))).GetValue()); pRetval = rOriginal.Clone(); DBG_ASSERT(pRetval, "ImpCreateShadowObjectClone: Could not clone object (!)"); // look for used stuff SdrObjListIter aIterator(rOriginal); sal_Bool bLineUsed(sal_False); sal_Bool bAllFillUsed(sal_False); sal_Bool bSolidFillUsed(sal_False); sal_Bool bGradientFillUsed(sal_False); sal_Bool bHatchFillUsed(sal_False); sal_Bool bBitmapFillUsed(sal_False); while(aIterator.IsMore()) { SdrObject* pObj = aIterator.Next(); XFillStyle eFillStyle = ((XFillStyleItem&)(pObj->GetMergedItem(XATTR_FILLSTYLE))).GetValue(); if(!bLineUsed) { XLineStyle eLineStyle = ((XLineStyleItem&)(pObj->GetMergedItem(XATTR_LINESTYLE))).GetValue(); if(XLINE_NONE != eLineStyle) { bLineUsed = sal_True; } } if(!bAllFillUsed) { if(!bSolidFillUsed && XFILL_SOLID == eFillStyle) { bSolidFillUsed = sal_True; bAllFillUsed = (bSolidFillUsed || bGradientFillUsed || bHatchFillUsed || bBitmapFillUsed); } if(!bGradientFillUsed && XFILL_GRADIENT == eFillStyle) { bGradientFillUsed = sal_True; bAllFillUsed = (bSolidFillUsed || bGradientFillUsed || bHatchFillUsed || bBitmapFillUsed); } if(!bHatchFillUsed && XFILL_HATCH == eFillStyle) { bHatchFillUsed = sal_True; bAllFillUsed = (bSolidFillUsed || bGradientFillUsed || bHatchFillUsed || bBitmapFillUsed); } if(!bBitmapFillUsed && XFILL_BITMAP == eFillStyle) { bBitmapFillUsed = sal_True; bAllFillUsed = (bSolidFillUsed || bGradientFillUsed || bHatchFillUsed || bBitmapFillUsed); } } } // translate to shadow coordinates pRetval->NbcMove(Size(nXDist, nYDist)); // set items as needed SfxItemSet aTempSet(rOriginalSet); // SJ: #40108# :-( if a SvxWritingModeItem (Top->Bottom) is set the text object // is creating a paraobject, but paraobjects can not be created without model. So // we are preventing the crash by setting the writing mode always left to right, // this is not bad since our shadow geometry does not contain text. aTempSet.Put( SvxWritingModeItem( com::sun::star::text::WritingMode_LR_TB, SDRATTR_TEXTDIRECTION ) ); // no shadow aTempSet.Put(SdrShadowItem(sal_False)); aTempSet.Put(SdrShadowXDistItem(0L)); aTempSet.Put(SdrShadowYDistItem(0L)); // line color and transparence like shadow if(bLineUsed) { aTempSet.Put(XLineColorItem(String(), aShadowColor)); aTempSet.Put(XLineTransparenceItem(nShadowTransparence)); } // fill color and transparence like shadow if(bSolidFillUsed) { aTempSet.Put(XFillColorItem(String(), aShadowColor)); aTempSet.Put(XFillTransparenceItem(nShadowTransparence)); } // gradient and transparence like shadow if(bGradientFillUsed) { XGradient aGradient(((XFillGradientItem&)(rOriginalSet.Get(XATTR_FILLGRADIENT))).GetGradientValue()); sal_uInt8 nStartLuminance(aGradient.GetStartColor().GetLuminance()); sal_uInt8 nEndLuminance(aGradient.GetEndColor().GetLuminance()); if(aGradient.GetStartIntens() != 100) { nStartLuminance = (sal_uInt8)(nStartLuminance * ((double)aGradient.GetStartIntens() / 100.0)); } if(aGradient.GetEndIntens() != 100) { nEndLuminance = (sal_uInt8)(nEndLuminance * ((double)aGradient.GetEndIntens() / 100.0)); } ::Color aStartColor( (sal_uInt8)((nStartLuminance * aShadowColor.GetRed()) / 256), (sal_uInt8)((nStartLuminance * aShadowColor.GetGreen()) / 256), (sal_uInt8)((nStartLuminance * aShadowColor.GetBlue()) / 256)); ::Color aEndColor( (sal_uInt8)((nEndLuminance * aShadowColor.GetRed()) / 256), (sal_uInt8)((nEndLuminance * aShadowColor.GetGreen()) / 256), (sal_uInt8)((nEndLuminance * aShadowColor.GetBlue()) / 256)); aGradient.SetStartColor(aStartColor); aGradient.SetEndColor(aEndColor); aTempSet.Put(XFillGradientItem(aTempSet.GetPool(), aGradient)); aTempSet.Put(XFillTransparenceItem(nShadowTransparence)); } // hatch and transparence like shadow if(bHatchFillUsed) { XHatch aHatch(((XFillHatchItem&)(rOriginalSet.Get(XATTR_FILLHATCH))).GetHatchValue()); aHatch.SetColor(aShadowColor); aTempSet.Put(XFillHatchItem(aTempSet.GetPool(), aHatch)); aTempSet.Put(XFillTransparenceItem(nShadowTransparence)); } // bitmap and transparence like shadow if(bBitmapFillUsed) { GraphicObject aGraphicObject(((XFillBitmapItem&)(rOriginalSet.Get(XATTR_FILLBITMAP))).GetGraphicObject()); const BitmapEx aBitmapEx(aGraphicObject.GetGraphic().GetBitmapEx()); Bitmap aBitmap(aBitmapEx.GetBitmap()); if(!aBitmap.IsEmpty()) { BitmapReadAccess* pReadAccess = aBitmap.AcquireReadAccess(); if(pReadAccess) { Bitmap aDestBitmap(aBitmap.GetSizePixel(), 24L); BitmapWriteAccess* pWriteAccess = aDestBitmap.AcquireWriteAccess(); if(pWriteAccess) { for(sal_Int32 y(0L); y < pReadAccess->Height(); y++) { for(sal_Int32 x(0L); x < pReadAccess->Width(); x++) { sal_uInt16 nLuminance((sal_uInt16)pReadAccess->GetLuminance(y, x) + 1); const BitmapColor aDestColor( (sal_uInt8)((nLuminance * (sal_uInt16)aShadowColor.GetRed()) >> 8L), (sal_uInt8)((nLuminance * (sal_uInt16)aShadowColor.GetGreen()) >> 8L), (sal_uInt8)((nLuminance * (sal_uInt16)aShadowColor.GetBlue()) >> 8L)); pWriteAccess->SetPixel(y, x, aDestColor); } } aDestBitmap.ReleaseAccess(pWriteAccess); } aBitmap.ReleaseAccess(pReadAccess); if(aBitmapEx.IsTransparent()) { if(aBitmapEx.IsAlpha()) { aGraphicObject.SetGraphic(Graphic(BitmapEx(aDestBitmap, aBitmapEx.GetAlpha()))); } else { aGraphicObject.SetGraphic(Graphic(BitmapEx(aDestBitmap, aBitmapEx.GetMask()))); } } else { aGraphicObject.SetGraphic(Graphic(aDestBitmap)); } } } aTempSet.Put(XFillBitmapItem(aTempSet.GetPool(), aGraphicObject)); aTempSet.Put(XFillTransparenceItem(nShadowTransparence)); } // set attributes and paint shadow object pRetval->SetMergedItemSet( aTempSet ); } return pRetval; } //////////////////////////////////////////////////////////////////////////////////////////////////// Reference< XCustomShapeEngine > SdrObjCustomShape::GetCustomShapeEngine( const SdrObjCustomShape* pCustomShape ) { Reference< XCustomShapeEngine > xCustomShapeEngine; String aEngine(((SdrCustomShapeEngineItem&)pCustomShape->GetMergedItem( SDRATTR_CUSTOMSHAPE_ENGINE )).GetValue()); if ( !aEngine.Len() ) aEngine = String( RTL_CONSTASCII_USTRINGPARAM ( "com.sun.star.drawing.EnhancedCustomShapeEngine" ) ); Reference< XMultiServiceFactory > xFactory( ::comphelper::getProcessServiceFactory() ); Reference< XShape > aXShape = GetXShapeForSdrObject( (SdrObjCustomShape*)pCustomShape ); if ( aXShape.is() ) { if ( aEngine.Len() && xFactory.is() ) { Sequence< Any > aArgument( 1 ); Sequence< PropertyValue > aPropValues( 1 ); aPropValues[ 0 ].Name = rtl::OUString::createFromAscii( "CustomShape" ); aPropValues[ 0 ].Value <<= aXShape; aArgument[ 0 ] <<= aPropValues; Reference< XInterface > xInterface( xFactory->createInstanceWithArguments( aEngine, aArgument ) ); if ( xInterface.is() ) xCustomShapeEngine = Reference< XCustomShapeEngine >( xInterface, UNO_QUERY ); } } return xCustomShapeEngine; } const SdrObject* SdrObjCustomShape::GetSdrObjectFromCustomShape() const { if ( !mXRenderedCustomShape.is() ) { Reference< XCustomShapeEngine > xCustomShapeEngine( GetCustomShapeEngine( this ) ); if ( xCustomShapeEngine.is() ) ((SdrObjCustomShape*)this)->mXRenderedCustomShape = xCustomShapeEngine->render(); } SdrObject* pRenderedCustomShape = mXRenderedCustomShape.is() ? GetSdrObjectFromXShape( mXRenderedCustomShape ) : NULL; return pRenderedCustomShape; } // #i37011# Shadow geometry creation const SdrObject* SdrObjCustomShape::GetSdrObjectShadowFromCustomShape() const { if(!mpLastShadowGeometry) { const SdrObject* pSdrObject = GetSdrObjectFromCustomShape(); if(pSdrObject) { const SfxItemSet& rOriginalSet = GetObjectItemSet(); const sal_Bool bShadow(((SdrShadowItem&)rOriginalSet.Get( SDRATTR_SHADOW )).GetValue()); if(bShadow) { // create a clone with all attributes changed to shadow attributes // and translation executed, too. ((SdrObjCustomShape*)this)->mpLastShadowGeometry = ImpCreateShadowObjectClone(*pSdrObject, rOriginalSet); } } } return mpLastShadowGeometry; } sal_Bool SdrObjCustomShape::IsTextPath() const { const rtl::OUString sTextPath( RTL_CONSTASCII_USTRINGPARAM ( "TextPath" ) ); sal_Bool bTextPathOn = sal_False; SdrCustomShapeGeometryItem& rGeometryItem = (SdrCustomShapeGeometryItem&)GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ); Any* pAny = rGeometryItem.GetPropertyValueByName( sTextPath, sTextPath ); if ( pAny ) *pAny >>= bTextPathOn; return bTextPathOn; } sal_Bool SdrObjCustomShape::UseNoFillStyle() const { sal_Bool bRet = sal_False; rtl::OUString sShapeType; const rtl::OUString sType( RTL_CONSTASCII_USTRINGPARAM ( "Type" ) ); SdrCustomShapeGeometryItem& rGeometryItem( (SdrCustomShapeGeometryItem&)GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ); Any* pAny = rGeometryItem.GetPropertyValueByName( sType ); if ( pAny ) *pAny >>= sShapeType; bRet = IsCustomShapeFilledByDefault( EnhancedCustomShapeTypeNames::Get( sType ) ) == 0; return bRet; } sal_Bool SdrObjCustomShape::IsMirroredX() const { sal_Bool bMirroredX = sal_False; SdrCustomShapeGeometryItem aGeometryItem( (SdrCustomShapeGeometryItem&)GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ); const rtl::OUString sMirroredX( RTL_CONSTASCII_USTRINGPARAM ( "MirroredX" ) ); com::sun::star::uno::Any* pAny = aGeometryItem.GetPropertyValueByName( sMirroredX ); if ( pAny ) *pAny >>= bMirroredX; return bMirroredX; } sal_Bool SdrObjCustomShape::IsMirroredY() const { sal_Bool bMirroredY = sal_False; SdrCustomShapeGeometryItem aGeometryItem( (SdrCustomShapeGeometryItem&)GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ); const rtl::OUString sMirroredY( RTL_CONSTASCII_USTRINGPARAM ( "MirroredY" ) ); com::sun::star::uno::Any* pAny = aGeometryItem.GetPropertyValueByName( sMirroredY ); if ( pAny ) *pAny >>= bMirroredY; return bMirroredY; } void SdrObjCustomShape::SetMirroredX( const sal_Bool bMirrorX ) { SdrCustomShapeGeometryItem aGeometryItem( (SdrCustomShapeGeometryItem&)GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ); const rtl::OUString sMirroredX( RTL_CONSTASCII_USTRINGPARAM ( "MirroredX" ) ); //com::sun::star::uno::Any* pAny = aGeometryItem.GetPropertyValueByName( sMirroredX ); PropertyValue aPropVal; aPropVal.Name = sMirroredX; aPropVal.Value <<= bMirrorX; aGeometryItem.SetPropertyValue( aPropVal ); SetMergedItem( aGeometryItem ); } void SdrObjCustomShape::SetMirroredY( const sal_Bool bMirrorY ) { SdrCustomShapeGeometryItem aGeometryItem( (SdrCustomShapeGeometryItem&)GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ); const rtl::OUString sMirroredY( RTL_CONSTASCII_USTRINGPARAM ( "MirroredY" ) ); //com::sun::star::uno::Any* pAny = aGeometryItem.GetPropertyValueByName( sMirroredY ); PropertyValue aPropVal; aPropVal.Name = sMirroredY; aPropVal.Value <<= bMirrorY; aGeometryItem.SetPropertyValue( aPropVal ); SetMergedItem( aGeometryItem ); } double SdrObjCustomShape::GetObjectRotation() const { return fObjectRotation; } double SdrObjCustomShape::GetExtraTextRotation() const { const com::sun::star::uno::Any* pAny; SdrCustomShapeGeometryItem& rGeometryItem = (SdrCustomShapeGeometryItem&)GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ); const rtl::OUString sTextRotateAngle( RTL_CONSTASCII_USTRINGPARAM ( "TextRotateAngle" ) ); pAny = rGeometryItem.GetPropertyValueByName( sTextRotateAngle ); double fExtraTextRotateAngle = 0.0; if ( pAny ) *pAny >>= fExtraTextRotateAngle; return fExtraTextRotateAngle; } sal_Bool SdrObjCustomShape::GetTextBounds( Rectangle& rTextBound ) const { sal_Bool bRet = sal_False; Reference< XCustomShapeEngine > xCustomShapeEngine( GetCustomShapeEngine( this ) ); // a candidate for being cached if ( xCustomShapeEngine.is() ) { awt::Rectangle aR( xCustomShapeEngine->getTextBounds() ); if ( aR.Width || aR.Height ) { rTextBound = Rectangle( Point( aR.X, aR.Y ), Size( aR.Width, aR.Height ) ); bRet = sal_True; } } return bRet; } basegfx::B2DPolyPolygon SdrObjCustomShape::GetLineGeometry( const SdrObjCustomShape* pCustomShape, const sal_Bool bBezierAllowed ) { basegfx::B2DPolyPolygon aRetval; sal_Bool bRet = sal_False; Reference< XCustomShapeEngine > xCustomShapeEngine( GetCustomShapeEngine( pCustomShape ) ); if ( xCustomShapeEngine.is() ) { com::sun::star::drawing::PolyPolygonBezierCoords aBezierCoords = xCustomShapeEngine->getLineGeometry(); try { aRetval = SvxConvertPolyPolygonBezierToB2DPolyPolygon( &aBezierCoords ); if ( !bBezierAllowed && aRetval.areControlPointsUsed()) { aRetval = basegfx::tools::adaptiveSubdivideByAngle(aRetval); } bRet = sal_True; } catch ( const com::sun::star::lang::IllegalArgumentException ) { } } return aRetval; } std::vector< SdrCustomShapeInteraction > SdrObjCustomShape::GetInteractionHandles( const SdrObjCustomShape* pCustomShape ) const { std::vector< SdrCustomShapeInteraction > xRet; try { Reference< XCustomShapeEngine > xCustomShapeEngine( GetCustomShapeEngine( pCustomShape ) ); if ( xCustomShapeEngine.is() ) { int i; Sequence< Reference< XCustomShapeHandle > > xInteractionHandles( xCustomShapeEngine->getInteraction() ); for ( i = 0; i < xInteractionHandles.getLength(); i++ ) { if ( xInteractionHandles[ i ].is() ) { SdrCustomShapeInteraction aSdrCustomShapeInteraction; aSdrCustomShapeInteraction.xInteraction = xInteractionHandles[ i ]; aSdrCustomShapeInteraction.aPosition = xInteractionHandles[ i ]->getPosition(); sal_Int32 nMode = 0; switch( ImpGetCustomShapeType( *this ) ) { case mso_sptAccentBorderCallout90 : // 2 ortho { if ( !i ) nMode |= CUSTOMSHAPE_HANDLE_RESIZE_FIXED | CUSTOMSHAPE_HANDLE_CREATE_FIXED; else if ( i == 1) nMode |= CUSTOMSHAPE_HANDLE_RESIZE_ABSOLUTE_X | CUSTOMSHAPE_HANDLE_RESIZE_ABSOLUTE_Y | CUSTOMSHAPE_HANDLE_MOVE_SHAPE | CUSTOMSHAPE_HANDLE_ORTHO4; } break; case mso_sptWedgeRectCallout : case mso_sptWedgeRRectCallout : case mso_sptCloudCallout : case mso_sptWedgeEllipseCallout : { if ( !i ) nMode |= CUSTOMSHAPE_HANDLE_RESIZE_FIXED; } break; case mso_sptBorderCallout1 : // 2 diag { if ( !i ) nMode |= CUSTOMSHAPE_HANDLE_RESIZE_FIXED | CUSTOMSHAPE_HANDLE_CREATE_FIXED; else if ( i == 1 ) nMode |= CUSTOMSHAPE_HANDLE_RESIZE_ABSOLUTE_X | CUSTOMSHAPE_HANDLE_RESIZE_ABSOLUTE_Y | CUSTOMSHAPE_HANDLE_MOVE_SHAPE; } break; case mso_sptBorderCallout2 : // 3 { if ( !i ) nMode |= CUSTOMSHAPE_HANDLE_RESIZE_FIXED | CUSTOMSHAPE_HANDLE_CREATE_FIXED; else if ( i == 2 ) nMode |= CUSTOMSHAPE_HANDLE_RESIZE_ABSOLUTE_X | CUSTOMSHAPE_HANDLE_RESIZE_ABSOLUTE_Y | CUSTOMSHAPE_HANDLE_MOVE_SHAPE; } break; case mso_sptCallout90 : case mso_sptAccentCallout90 : case mso_sptBorderCallout90 : case mso_sptCallout1 : case mso_sptCallout2 : case mso_sptCallout3 : case mso_sptAccentCallout1 : case mso_sptAccentCallout2 : case mso_sptAccentCallout3 : case mso_sptBorderCallout3 : case mso_sptAccentBorderCallout1 : case mso_sptAccentBorderCallout2 : case mso_sptAccentBorderCallout3 : { if ( !i ) nMode |= CUSTOMSHAPE_HANDLE_RESIZE_FIXED | CUSTOMSHAPE_HANDLE_CREATE_FIXED; } break; default: break; } aSdrCustomShapeInteraction.nMode = nMode; xRet.push_back( aSdrCustomShapeInteraction ); } } } } catch( const uno::RuntimeException& ) { } return xRet; } ////////////////////////////////////////////////////////////////////////////// // BaseProperties section #define DEFAULT_MINIMUM_SIGNED_COMPARE ((sal_Int32)0x80000000) #define DEFAULT_MAXIMUM_SIGNED_COMPARE ((sal_Int32)0x7fffffff) sdr::properties::BaseProperties* SdrObjCustomShape::CreateObjectSpecificProperties() { return new sdr::properties::CustomShapeProperties(*this); } TYPEINIT1(SdrObjCustomShape,SdrTextObj); SdrObjCustomShape::SdrObjCustomShape() : SdrTextObj(), fObjectRotation( 0.0 ), mpLastShadowGeometry(0L) { bTextFrame = sal_True; } SdrObjCustomShape::~SdrObjCustomShape() { // delete buffered display geometry InvalidateRenderGeometry(); } void SdrObjCustomShape::MergeDefaultAttributes( const rtl::OUString* pType ) { PropertyValue aPropVal; rtl::OUString sShapeType; const rtl::OUString sType( RTL_CONSTASCII_USTRINGPARAM ( "Type" ) ); SdrCustomShapeGeometryItem aGeometryItem( (SdrCustomShapeGeometryItem&)GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ); if ( pType && pType->getLength() ) { sal_Int32 nType = pType->toInt32(); if ( nType ) sShapeType = EnhancedCustomShapeTypeNames::Get( static_cast< MSO_SPT >( nType ) ); else sShapeType = *pType; aPropVal.Name = sType; aPropVal.Value <<= sShapeType; aGeometryItem.SetPropertyValue( aPropVal ); } else { Any *pAny = aGeometryItem.GetPropertyValueByName( sType ); if ( pAny ) *pAny >>= sShapeType; } MSO_SPT eSpType = EnhancedCustomShapeTypeNames::Get( sShapeType ); const sal_Int32* pDefData = NULL; const mso_CustomShape* pDefCustomShape = GetCustomShapeContent( eSpType ); if ( pDefCustomShape ) pDefData = pDefCustomShape->pDefData; com::sun::star::uno::Sequence< com::sun::star::drawing::EnhancedCustomShapeAdjustmentValue > seqAdjustmentValues; ////////////////////// // AdjustmentValues // ////////////////////// const rtl::OUString sAdjustmentValues( RTL_CONSTASCII_USTRINGPARAM ( "AdjustmentValues" ) ); const Any* pAny = ((SdrCustomShapeGeometryItem&)aGeometryItem).GetPropertyValueByName( sAdjustmentValues ); if ( pAny ) *pAny >>= seqAdjustmentValues; if ( pDefCustomShape && pDefData ) // now check if we have to default some adjustment values { // first check if there are adjustment values are to be appended sal_Int32 i, nAdjustmentValues = seqAdjustmentValues.getLength(); sal_Int32 nAdjustmentDefaults = *pDefData++; if ( nAdjustmentDefaults > nAdjustmentValues ) { seqAdjustmentValues.realloc( nAdjustmentDefaults ); for ( i = nAdjustmentValues; i < nAdjustmentDefaults; i++ ) { seqAdjustmentValues[ i ].Value <<= pDefData[ i ]; seqAdjustmentValues[ i ].State = com::sun::star::beans::PropertyState_DIRECT_VALUE; // com::sun::star::beans::PropertyState_DEFAULT_VALUE; } } // check if there are defaulted adjustment values that should be filled the hard coded defaults (pDefValue) sal_Int32 nCount = nAdjustmentValues > nAdjustmentDefaults ? nAdjustmentDefaults : nAdjustmentValues; for ( i = 0; i < nCount; i++ ) { if ( seqAdjustmentValues[ i ].State != com::sun::star::beans::PropertyState_DIRECT_VALUE ) { seqAdjustmentValues[ i ].Value <<= pDefData[ i ]; seqAdjustmentValues[ i ].State = com::sun::star::beans::PropertyState_DIRECT_VALUE; } } } aPropVal.Name = sAdjustmentValues; aPropVal.Value <<= seqAdjustmentValues; aGeometryItem.SetPropertyValue( aPropVal ); /////////////// // Coordsize // /////////////// const rtl::OUString sViewBox( RTL_CONSTASCII_USTRINGPARAM ( "ViewBox" ) ); const Any* pViewBox = ((SdrCustomShapeGeometryItem&)aGeometryItem).GetPropertyValueByName( sViewBox ); com::sun::star::awt::Rectangle aViewBox; if ( !pViewBox || !(*pViewBox >>= aViewBox ) ) { if ( pDefCustomShape ) { aViewBox.X = 0; aViewBox.Y = 0; aViewBox.Width = pDefCustomShape->nCoordWidth; aViewBox.Height= pDefCustomShape->nCoordHeight; aPropVal.Name = sViewBox; aPropVal.Value <<= aViewBox; aGeometryItem.SetPropertyValue( aPropVal ); } } const rtl::OUString sPath( RTL_CONSTASCII_USTRINGPARAM ( "Path" ) ); ////////////////////// // Path/Coordinates // ////////////////////// const rtl::OUString sCoordinates( RTL_CONSTASCII_USTRINGPARAM ( "Coordinates" ) ); pAny = ((SdrCustomShapeGeometryItem&)aGeometryItem).GetPropertyValueByName( sPath, sCoordinates ); if ( !pAny && pDefCustomShape && pDefCustomShape->nVertices && pDefCustomShape->pVertices ) { com::sun::star::uno::Sequence< com::sun::star::drawing::EnhancedCustomShapeParameterPair> seqCoordinates; sal_Int32 i, nCount = pDefCustomShape->nVertices; seqCoordinates.realloc( nCount ); for ( i = 0; i < nCount; i++ ) { EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqCoordinates[ i ].First, pDefCustomShape->pVertices[ i ].nValA ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqCoordinates[ i ].Second, pDefCustomShape->pVertices[ i ].nValB ); } aPropVal.Name = sCoordinates; aPropVal.Value <<= seqCoordinates; aGeometryItem.SetPropertyValue( sPath, aPropVal ); } ///////////////////// // Path/GluePoints // ///////////////////// const rtl::OUString sGluePoints( RTL_CONSTASCII_USTRINGPARAM ( "GluePoints" ) ); pAny = ((SdrCustomShapeGeometryItem&)aGeometryItem).GetPropertyValueByName( sPath, sGluePoints ); if ( !pAny && pDefCustomShape && pDefCustomShape->nGluePoints && pDefCustomShape->pGluePoints ) { com::sun::star::uno::Sequence< com::sun::star::drawing::EnhancedCustomShapeParameterPair> seqGluePoints; sal_Int32 i, nCount = pDefCustomShape->nGluePoints; seqGluePoints.realloc( nCount ); for ( i = 0; i < nCount; i++ ) { EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqGluePoints[ i ].First, pDefCustomShape->pGluePoints[ i ].nValA ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqGluePoints[ i ].Second, pDefCustomShape->pGluePoints[ i ].nValB ); } aPropVal.Name = sGluePoints; aPropVal.Value <<= seqGluePoints; aGeometryItem.SetPropertyValue( sPath, aPropVal ); } /////////////////// // Path/Segments // /////////////////// const rtl::OUString sSegments( RTL_CONSTASCII_USTRINGPARAM ( "Segments" ) ); pAny = ((SdrCustomShapeGeometryItem&)aGeometryItem).GetPropertyValueByName( sPath, sSegments ); if ( !pAny && pDefCustomShape && pDefCustomShape->nElements && pDefCustomShape->pElements ) { com::sun::star::uno::Sequence< com::sun::star::drawing::EnhancedCustomShapeSegment > seqSegments; sal_Int32 i, nCount = pDefCustomShape->nElements; seqSegments.realloc( nCount ); for ( i = 0; i < nCount; i++ ) { EnhancedCustomShapeSegment& rSegInfo = seqSegments[ i ]; sal_uInt16 nSDat = pDefCustomShape->pElements[ i ]; switch( nSDat >> 8 ) { case 0x00 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::LINETO; rSegInfo.Count = nSDat & 0xff; if ( !rSegInfo.Count ) rSegInfo.Count = 1; } break; case 0x20 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::CURVETO; rSegInfo.Count = nSDat & 0xff; if ( !rSegInfo.Count ) rSegInfo.Count = 1; } break; case 0x40 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::MOVETO; rSegInfo.Count = nSDat & 0xff; if ( !rSegInfo.Count ) rSegInfo.Count = 1; } break; case 0x60 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::CLOSESUBPATH; rSegInfo.Count = 0; } break; case 0x80 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ENDSUBPATH; rSegInfo.Count = 0; } break; case 0xa1 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ANGLEELLIPSETO; rSegInfo.Count = ( nSDat & 0xff ) / 3; } break; case 0xa2 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ANGLEELLIPSE; rSegInfo.Count = ( nSDat & 0xff ) / 3; } break; case 0xa3 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ARCTO; rSegInfo.Count = ( nSDat & 0xff ) >> 2; } break; case 0xa4 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ARC; rSegInfo.Count = ( nSDat & 0xff ) >> 2; } break; case 0xa5 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::CLOCKWISEARCTO; rSegInfo.Count = ( nSDat & 0xff ) >> 2; } break; case 0xa6 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::CLOCKWISEARC; rSegInfo.Count = ( nSDat & 0xff ) >> 2; } break; case 0xa7 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ELLIPTICALQUADRANTX; rSegInfo.Count = nSDat & 0xff; } break; case 0xa8 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ELLIPTICALQUADRANTY; rSegInfo.Count = nSDat & 0xff; } break; case 0xaa : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::NOFILL; rSegInfo.Count = 0; } break; case 0xab : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::NOSTROKE; rSegInfo.Count = 0; } break; default: case 0xf8 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::UNKNOWN; rSegInfo.Count = nSDat; } break; } } aPropVal.Name = sSegments; aPropVal.Value <<= seqSegments; aGeometryItem.SetPropertyValue( sPath, aPropVal ); } /////////////////// // Path/StretchX // /////////////////// const rtl::OUString sStretchX( RTL_CONSTASCII_USTRINGPARAM ( "StretchX" ) ); pAny = ((SdrCustomShapeGeometryItem&)aGeometryItem).GetPropertyValueByName( sPath, sStretchX ); if ( !pAny && pDefCustomShape ) { sal_Int32 nXRef = pDefCustomShape->nXRef; if ( ( nXRef != DEFAULT_MINIMUM_SIGNED_COMPARE ) ) { aPropVal.Name = sStretchX; aPropVal.Value <<= nXRef; aGeometryItem.SetPropertyValue( sPath, aPropVal ); } } /////////////////// // Path/StretchY // /////////////////// const rtl::OUString sStretchY( RTL_CONSTASCII_USTRINGPARAM ( "StretchY" ) ); pAny = ((SdrCustomShapeGeometryItem&)aGeometryItem).GetPropertyValueByName( sPath, sStretchY ); if ( !pAny && pDefCustomShape ) { sal_Int32 nYRef = pDefCustomShape->nYRef; if ( ( nYRef != DEFAULT_MINIMUM_SIGNED_COMPARE ) ) { aPropVal.Name = sStretchY; aPropVal.Value <<= nYRef; aGeometryItem.SetPropertyValue( sPath, aPropVal ); } } ///////////////////// // Path/TextFrames // ///////////////////// const rtl::OUString sTextFrames( RTL_CONSTASCII_USTRINGPARAM ( "TextFrames" ) ); pAny = ((SdrCustomShapeGeometryItem&)aGeometryItem).GetPropertyValueByName( sPath, sTextFrames ); if ( !pAny && pDefCustomShape && pDefCustomShape->nTextRect && pDefCustomShape->pTextRect ) { com::sun::star::uno::Sequence< com::sun::star::drawing::EnhancedCustomShapeTextFrame > seqTextFrames; sal_Int32 i, nCount = pDefCustomShape->nTextRect; seqTextFrames.realloc( nCount ); const SvxMSDffTextRectangles* pRectangles = pDefCustomShape->pTextRect; for ( i = 0; i < nCount; i++, pRectangles++ ) { EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames[ i ].TopLeft.First, pRectangles->nPairA.nValA ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames[ i ].TopLeft.Second, pRectangles->nPairA.nValB ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames[ i ].BottomRight.First, pRectangles->nPairB.nValA ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames[ i ].BottomRight.Second, pRectangles->nPairB.nValB ); } aPropVal.Name = sTextFrames; aPropVal.Value <<= seqTextFrames; aGeometryItem.SetPropertyValue( sPath, aPropVal ); } /////////////// // Equations // /////////////// const rtl::OUString sEquations( RTL_CONSTASCII_USTRINGPARAM( "Equations" ) ); pAny = ((SdrCustomShapeGeometryItem&)aGeometryItem).GetPropertyValueByName( sEquations ); if ( !pAny && pDefCustomShape && pDefCustomShape->nCalculation && pDefCustomShape->pCalculation ) { com::sun::star::uno::Sequence< rtl::OUString > seqEquations; sal_Int32 i, nCount = pDefCustomShape->nCalculation; seqEquations.realloc( nCount ); const SvxMSDffCalculationData* pData = pDefCustomShape->pCalculation; for ( i = 0; i < nCount; i++, pData++ ) seqEquations[ i ] = EnhancedCustomShape2d::GetEquation( pData->nFlags, pData->nVal[ 0 ], pData->nVal[ 1 ], pData->nVal[ 2 ] ); aPropVal.Name = sEquations; aPropVal.Value <<= seqEquations; aGeometryItem.SetPropertyValue( aPropVal ); } ///////////// // Handles // ///////////// const rtl::OUString sHandles( RTL_CONSTASCII_USTRINGPARAM( "Handles" ) ); pAny = ((SdrCustomShapeGeometryItem&)aGeometryItem).GetPropertyValueByName( sHandles ); if ( !pAny && pDefCustomShape && pDefCustomShape->nHandles && pDefCustomShape->pHandles ) { com::sun::star::uno::Sequence< com::sun::star::beans::PropertyValues > seqHandles; sal_Int32 i, n, nCount = pDefCustomShape->nHandles; const SvxMSDffHandle* pData = pDefCustomShape->pHandles; seqHandles.realloc( nCount ); for ( i = 0; i < nCount; i++, pData++ ) { sal_Int32 nPropertiesNeeded = 1; // position is always needed sal_Int32 nFlags = pData->nFlags; if ( nFlags & MSDFF_HANDLE_FLAGS_MIRRORED_X ) nPropertiesNeeded++; if ( nFlags & MSDFF_HANDLE_FLAGS_MIRRORED_Y ) nPropertiesNeeded++; if ( nFlags & MSDFF_HANDLE_FLAGS_SWITCHED ) nPropertiesNeeded++; if ( nFlags & MSDFF_HANDLE_FLAGS_POLAR ) { nPropertiesNeeded++; if ( nFlags & MSDFF_HANDLE_FLAGS_RADIUS_RANGE ) { if ( pData->nRangeXMin != DEFAULT_MINIMUM_SIGNED_COMPARE ) nPropertiesNeeded++; if ( pData->nRangeXMax != DEFAULT_MAXIMUM_SIGNED_COMPARE ) nPropertiesNeeded++; } } else if ( nFlags & MSDFF_HANDLE_FLAGS_RANGE ) { if ( pData->nRangeXMin != DEFAULT_MINIMUM_SIGNED_COMPARE ) nPropertiesNeeded++; if ( pData->nRangeXMax != DEFAULT_MAXIMUM_SIGNED_COMPARE ) nPropertiesNeeded++; if ( pData->nRangeYMin != DEFAULT_MINIMUM_SIGNED_COMPARE ) nPropertiesNeeded++; if ( pData->nRangeYMax != DEFAULT_MAXIMUM_SIGNED_COMPARE ) nPropertiesNeeded++; } n = 0; com::sun::star::beans::PropertyValues& rPropValues = seqHandles[ i ]; rPropValues.realloc( nPropertiesNeeded ); // POSITION { const rtl::OUString sPosition( RTL_CONSTASCII_USTRINGPARAM ( "Position" ) ); ::com::sun::star::drawing::EnhancedCustomShapeParameterPair aPosition; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aPosition.First, pData->nPositionX, sal_True, sal_True ); EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aPosition.Second, pData->nPositionY, sal_True, sal_False ); rPropValues[ n ].Name = sPosition; rPropValues[ n++ ].Value <<= aPosition; } if ( nFlags & MSDFF_HANDLE_FLAGS_MIRRORED_X ) { const rtl::OUString sMirroredX( RTL_CONSTASCII_USTRINGPARAM ( "MirroredX" ) ); sal_Bool bMirroredX = sal_True; rPropValues[ n ].Name = sMirroredX; rPropValues[ n++ ].Value <<= bMirroredX; } if ( nFlags & MSDFF_HANDLE_FLAGS_MIRRORED_Y ) { const rtl::OUString sMirroredY( RTL_CONSTASCII_USTRINGPARAM ( "MirroredY" ) ); sal_Bool bMirroredY = sal_True; rPropValues[ n ].Name = sMirroredY; rPropValues[ n++ ].Value <<= bMirroredY; } if ( nFlags & MSDFF_HANDLE_FLAGS_SWITCHED ) { const rtl::OUString sSwitched( RTL_CONSTASCII_USTRINGPARAM ( "Switched" ) ); sal_Bool bSwitched = sal_True; rPropValues[ n ].Name = sSwitched; rPropValues[ n++ ].Value <<= bSwitched; } if ( nFlags & MSDFF_HANDLE_FLAGS_POLAR ) { const rtl::OUString sPolar( RTL_CONSTASCII_USTRINGPARAM ( "Polar" ) ); ::com::sun::star::drawing::EnhancedCustomShapeParameterPair aCenter; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aCenter.First, pData->nCenterX, ( nFlags & MSDFF_HANDLE_FLAGS_CENTER_X_IS_SPECIAL ) != 0, sal_True ); EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aCenter.Second, pData->nCenterY, ( nFlags & MSDFF_HANDLE_FLAGS_CENTER_Y_IS_SPECIAL ) != 0, sal_False ); rPropValues[ n ].Name = sPolar; rPropValues[ n++ ].Value <<= aCenter; if ( nFlags & MSDFF_HANDLE_FLAGS_RADIUS_RANGE ) { if ( pData->nRangeXMin != DEFAULT_MINIMUM_SIGNED_COMPARE ) { const rtl::OUString sRadiusRangeMinimum( RTL_CONSTASCII_USTRINGPARAM ( "RadiusRangeMinimum" ) ); ::com::sun::star::drawing::EnhancedCustomShapeParameter aRadiusRangeMinimum; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRadiusRangeMinimum, pData->nRangeXMin, ( nFlags & MSDFF_HANDLE_FLAGS_RANGE_X_MIN_IS_SPECIAL ) != 0, sal_True ); rPropValues[ n ].Name = sRadiusRangeMinimum; rPropValues[ n++ ].Value <<= aRadiusRangeMinimum; } if ( pData->nRangeXMax != DEFAULT_MAXIMUM_SIGNED_COMPARE ) { const rtl::OUString sRadiusRangeMaximum( RTL_CONSTASCII_USTRINGPARAM ( "RadiusRangeMaximum" ) ); ::com::sun::star::drawing::EnhancedCustomShapeParameter aRadiusRangeMaximum; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRadiusRangeMaximum, pData->nRangeXMax, ( nFlags & MSDFF_HANDLE_FLAGS_RANGE_X_MAX_IS_SPECIAL ) != 0, sal_False ); rPropValues[ n ].Name = sRadiusRangeMaximum; rPropValues[ n++ ].Value <<= aRadiusRangeMaximum; } } } else if ( nFlags & MSDFF_HANDLE_FLAGS_RANGE ) { if ( pData->nRangeXMin != DEFAULT_MINIMUM_SIGNED_COMPARE ) { const rtl::OUString sRangeXMinimum( RTL_CONSTASCII_USTRINGPARAM ( "RangeXMinimum" ) ); ::com::sun::star::drawing::EnhancedCustomShapeParameter aRangeXMinimum; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRangeXMinimum, pData->nRangeXMin, ( nFlags & MSDFF_HANDLE_FLAGS_RANGE_X_MIN_IS_SPECIAL ) != 0, sal_True ); rPropValues[ n ].Name = sRangeXMinimum; rPropValues[ n++ ].Value <<= aRangeXMinimum; } if ( pData->nRangeXMax != DEFAULT_MAXIMUM_SIGNED_COMPARE ) { const rtl::OUString sRangeXMaximum( RTL_CONSTASCII_USTRINGPARAM ( "RangeXMaximum" ) ); ::com::sun::star::drawing::EnhancedCustomShapeParameter aRangeXMaximum; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRangeXMaximum, pData->nRangeXMax, ( nFlags & MSDFF_HANDLE_FLAGS_RANGE_X_MAX_IS_SPECIAL ) != 0, sal_False ); rPropValues[ n ].Name = sRangeXMaximum; rPropValues[ n++ ].Value <<= aRangeXMaximum; } if ( pData->nRangeYMin != DEFAULT_MINIMUM_SIGNED_COMPARE ) { const rtl::OUString sRangeYMinimum( RTL_CONSTASCII_USTRINGPARAM ( "RangeYMinimum" ) ); ::com::sun::star::drawing::EnhancedCustomShapeParameter aRangeYMinimum; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRangeYMinimum, pData->nRangeYMin, ( nFlags & MSDFF_HANDLE_FLAGS_RANGE_Y_MIN_IS_SPECIAL ) != 0, sal_True ); rPropValues[ n ].Name = sRangeYMinimum; rPropValues[ n++ ].Value <<= aRangeYMinimum; } if ( pData->nRangeYMax != DEFAULT_MAXIMUM_SIGNED_COMPARE ) { const rtl::OUString sRangeYMaximum( RTL_CONSTASCII_USTRINGPARAM ( "RangeYMaximum" ) ); ::com::sun::star::drawing::EnhancedCustomShapeParameter aRangeYMaximum; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRangeYMaximum, pData->nRangeYMax, ( nFlags & MSDFF_HANDLE_FLAGS_RANGE_Y_MAX_IS_SPECIAL ) != 0, sal_False ); rPropValues[ n ].Name = sRangeYMaximum; rPropValues[ n++ ].Value <<= aRangeYMaximum; } } } aPropVal.Name = sHandles; aPropVal.Value <<= seqHandles; aGeometryItem.SetPropertyValue( aPropVal ); } SetMergedItem( aGeometryItem ); } sal_Bool SdrObjCustomShape::IsDefaultGeometry( const DefaultType eDefaultType ) const { sal_Bool bIsDefaultGeometry = sal_False; PropertyValue aPropVal; rtl::OUString sShapeType; const rtl::OUString sType( RTL_CONSTASCII_USTRINGPARAM ( "Type" ) ); SdrCustomShapeGeometryItem aGeometryItem( (SdrCustomShapeGeometryItem&)GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ); Any *pAny = aGeometryItem.GetPropertyValueByName( sType ); if ( pAny ) *pAny >>= sShapeType; MSO_SPT eSpType = EnhancedCustomShapeTypeNames::Get( sShapeType ); const mso_CustomShape* pDefCustomShape = GetCustomShapeContent( eSpType ); const rtl::OUString sPath( RTL_CONSTASCII_USTRINGPARAM ( "Path" ) ); switch( eDefaultType ) { case DEFAULT_VIEWBOX : { const rtl::OUString sViewBox( RTL_CONSTASCII_USTRINGPARAM ( "ViewBox" ) ); const Any* pViewBox = ((SdrCustomShapeGeometryItem&)aGeometryItem).GetPropertyValueByName( sViewBox ); com::sun::star::awt::Rectangle aViewBox; if ( pViewBox && ( *pViewBox >>= aViewBox ) ) { if ( ( aViewBox.Width == pDefCustomShape->nCoordWidth ) && ( aViewBox.Height == pDefCustomShape->nCoordHeight ) ) bIsDefaultGeometry = sal_True; } } break; case DEFAULT_PATH : { const rtl::OUString sCoordinates( RTL_CONSTASCII_USTRINGPARAM ( "Coordinates" ) ); pAny = ((SdrCustomShapeGeometryItem&)aGeometryItem).GetPropertyValueByName( sPath, sCoordinates ); if ( pAny && pDefCustomShape && pDefCustomShape->nVertices && pDefCustomShape->pVertices ) { com::sun::star::uno::Sequence< com::sun::star::drawing::EnhancedCustomShapeParameterPair> seqCoordinates1, seqCoordinates2; if ( *pAny >>= seqCoordinates1 ) { sal_Int32 i, nCount = pDefCustomShape->nVertices; seqCoordinates2.realloc( nCount ); for ( i = 0; i < nCount; i++ ) { EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqCoordinates2[ i ].First, pDefCustomShape->pVertices[ i ].nValA ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqCoordinates2[ i ].Second, pDefCustomShape->pVertices[ i ].nValB ); } if ( seqCoordinates1 == seqCoordinates2 ) bIsDefaultGeometry = sal_True; } } else if ( pDefCustomShape && ( ( pDefCustomShape->nVertices == 0 ) || ( pDefCustomShape->pVertices == 0 ) ) ) bIsDefaultGeometry = sal_True; } break; case DEFAULT_GLUEPOINTS : { const rtl::OUString sGluePoints( RTL_CONSTASCII_USTRINGPARAM ( "GluePoints" ) ); pAny = ((SdrCustomShapeGeometryItem&)aGeometryItem).GetPropertyValueByName( sPath, sGluePoints ); if ( pAny && pDefCustomShape && pDefCustomShape->nGluePoints && pDefCustomShape->pGluePoints ) { com::sun::star::uno::Sequence< com::sun::star::drawing::EnhancedCustomShapeParameterPair> seqGluePoints1, seqGluePoints2; if ( *pAny >>= seqGluePoints1 ) { sal_Int32 i, nCount = pDefCustomShape->nGluePoints; seqGluePoints2.realloc( nCount ); for ( i = 0; i < nCount; i++ ) { EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqGluePoints2[ i ].First, pDefCustomShape->pGluePoints[ i ].nValA ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqGluePoints2[ i ].Second, pDefCustomShape->pGluePoints[ i ].nValB ); } if ( seqGluePoints1 == seqGluePoints2 ) bIsDefaultGeometry = sal_True; } } else if ( pDefCustomShape && ( pDefCustomShape->nGluePoints == 0 ) ) bIsDefaultGeometry = sal_True; } break; case DEFAULT_SEGMENTS : { /////////////////// // Path/Segments // /////////////////// const rtl::OUString sSegments( RTL_CONSTASCII_USTRINGPARAM ( "Segments" ) ); pAny = ((SdrCustomShapeGeometryItem&)aGeometryItem).GetPropertyValueByName( sPath, sSegments ); if ( pAny ) { com::sun::star::uno::Sequence< com::sun::star::drawing::EnhancedCustomShapeSegment > seqSegments1, seqSegments2; if ( *pAny >>= seqSegments1 ) { if ( pDefCustomShape && pDefCustomShape->nElements && pDefCustomShape->pElements ) { sal_Int32 i, nCount = pDefCustomShape->nElements; if ( nCount ) { seqSegments2.realloc( nCount ); for ( i = 0; i < nCount; i++ ) { EnhancedCustomShapeSegment& rSegInfo = seqSegments2[ i ]; sal_uInt16 nSDat = pDefCustomShape->pElements[ i ]; switch( nSDat >> 8 ) { case 0x00 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::LINETO; rSegInfo.Count = nSDat & 0xff; if ( !rSegInfo.Count ) rSegInfo.Count = 1; } break; case 0x20 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::CURVETO; rSegInfo.Count = nSDat & 0xff; if ( !rSegInfo.Count ) rSegInfo.Count = 1; } break; case 0x40 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::MOVETO; rSegInfo.Count = nSDat & 0xff; if ( !rSegInfo.Count ) rSegInfo.Count = 1; } break; case 0x60 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::CLOSESUBPATH; rSegInfo.Count = 0; } break; case 0x80 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ENDSUBPATH; rSegInfo.Count = 0; } break; case 0xa1 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ANGLEELLIPSETO; rSegInfo.Count = ( nSDat & 0xff ) / 3; } break; case 0xa2 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ANGLEELLIPSE; rSegInfo.Count = ( nSDat & 0xff ) / 3; } break; case 0xa3 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ARCTO; rSegInfo.Count = ( nSDat & 0xff ) >> 2; } break; case 0xa4 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ARC; rSegInfo.Count = ( nSDat & 0xff ) >> 2; } break; case 0xa5 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::CLOCKWISEARCTO; rSegInfo.Count = ( nSDat & 0xff ) >> 2; } break; case 0xa6 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::CLOCKWISEARC; rSegInfo.Count = ( nSDat & 0xff ) >> 2; } break; case 0xa7 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ELLIPTICALQUADRANTX; rSegInfo.Count = nSDat & 0xff; } break; case 0xa8 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::ELLIPTICALQUADRANTY; rSegInfo.Count = nSDat & 0xff; } break; case 0xaa : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::NOFILL; rSegInfo.Count = 0; } break; case 0xab : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::NOSTROKE; rSegInfo.Count = 0; } break; default: case 0xf8 : { rSegInfo.Command = EnhancedCustomShapeSegmentCommand::UNKNOWN; rSegInfo.Count = nSDat; } break; } } if ( seqSegments1 == seqSegments2 ) bIsDefaultGeometry = sal_True; } } else { // check if its the default segment description ( M L Z N ) if ( seqSegments1.getLength() == 4 ) { if ( ( seqSegments1[ 0 ].Command == EnhancedCustomShapeSegmentCommand::MOVETO ) && ( seqSegments1[ 1 ].Command == EnhancedCustomShapeSegmentCommand::LINETO ) && ( seqSegments1[ 2 ].Command == EnhancedCustomShapeSegmentCommand::CLOSESUBPATH ) && ( seqSegments1[ 3 ].Command == EnhancedCustomShapeSegmentCommand::ENDSUBPATH ) ) bIsDefaultGeometry = sal_True; } } } } else if ( pDefCustomShape && ( ( pDefCustomShape->nElements == 0 ) || ( pDefCustomShape->pElements == 0 ) ) ) bIsDefaultGeometry = sal_True; } break; case DEFAULT_STRETCHX : { const rtl::OUString sStretchX( RTL_CONSTASCII_USTRINGPARAM ( "StretchX" ) ); pAny = ((SdrCustomShapeGeometryItem&)aGeometryItem).GetPropertyValueByName( sPath, sStretchX ); if ( pAny && pDefCustomShape ) { sal_Int32 nStretchX = 0; if ( *pAny >>= nStretchX ) { if ( pDefCustomShape->nXRef == nStretchX ) bIsDefaultGeometry = sal_True; } } else if ( pDefCustomShape && ( pDefCustomShape->nXRef == DEFAULT_MINIMUM_SIGNED_COMPARE ) ) bIsDefaultGeometry = sal_True; } break; case DEFAULT_STRETCHY : { const rtl::OUString sStretchY( RTL_CONSTASCII_USTRINGPARAM ( "StretchY" ) ); pAny = ((SdrCustomShapeGeometryItem&)aGeometryItem).GetPropertyValueByName( sPath, sStretchY ); if ( pAny && pDefCustomShape ) { sal_Int32 nStretchY = 0; if ( *pAny >>= nStretchY ) { if ( pDefCustomShape->nYRef == nStretchY ) bIsDefaultGeometry = sal_True; } } else if ( pDefCustomShape && ( pDefCustomShape->nYRef == DEFAULT_MINIMUM_SIGNED_COMPARE ) ) bIsDefaultGeometry = sal_True; } break; case DEFAULT_EQUATIONS : { const rtl::OUString sEquations( RTL_CONSTASCII_USTRINGPARAM( "Equations" ) ); pAny = ((SdrCustomShapeGeometryItem&)aGeometryItem).GetPropertyValueByName( sEquations ); if ( pAny && pDefCustomShape && pDefCustomShape->nCalculation && pDefCustomShape->pCalculation ) { com::sun::star::uno::Sequence< rtl::OUString > seqEquations1, seqEquations2; if ( *pAny >>= seqEquations1 ) { sal_Int32 i, nCount = pDefCustomShape->nCalculation; seqEquations2.realloc( nCount ); const SvxMSDffCalculationData* pData = pDefCustomShape->pCalculation; for ( i = 0; i < nCount; i++, pData++ ) seqEquations2[ i ] = EnhancedCustomShape2d::GetEquation( pData->nFlags, pData->nVal[ 0 ], pData->nVal[ 1 ], pData->nVal[ 2 ] ); if ( seqEquations1 == seqEquations2 ) bIsDefaultGeometry = sal_True; } } else if ( pDefCustomShape && ( ( pDefCustomShape->nCalculation == 0 ) || ( pDefCustomShape->pCalculation == 0 ) ) ) bIsDefaultGeometry = sal_True; } break; case DEFAULT_TEXTFRAMES : { const rtl::OUString sTextFrames( RTL_CONSTASCII_USTRINGPARAM( "TextFrames" ) ); pAny = ((SdrCustomShapeGeometryItem&)aGeometryItem).GetPropertyValueByName( sPath, sTextFrames ); if ( pAny && pDefCustomShape && pDefCustomShape->nTextRect && pDefCustomShape->pTextRect ) { com::sun::star::uno::Sequence< com::sun::star::drawing::EnhancedCustomShapeTextFrame > seqTextFrames1, seqTextFrames2; if ( *pAny >>= seqTextFrames1 ) { sal_Int32 i, nCount = pDefCustomShape->nTextRect; seqTextFrames2.realloc( nCount ); const SvxMSDffTextRectangles* pRectangles = pDefCustomShape->pTextRect; for ( i = 0; i < nCount; i++, pRectangles++ ) { EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames2[ i ].TopLeft.First, pRectangles->nPairA.nValA ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames2[ i ].TopLeft.Second, pRectangles->nPairA.nValB ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames2[ i ].BottomRight.First, pRectangles->nPairB.nValA ); EnhancedCustomShape2d::SetEnhancedCustomShapeParameter( seqTextFrames2[ i ].BottomRight.Second, pRectangles->nPairB.nValB ); } if ( seqTextFrames1 == seqTextFrames2 ) bIsDefaultGeometry = sal_True; } } else if ( pDefCustomShape && ( ( pDefCustomShape->nTextRect == 0 ) || ( pDefCustomShape->pTextRect == 0 ) ) ) bIsDefaultGeometry = sal_True; } break; case DEFAULT_HANDLES : { const rtl::OUString sHandles( RTL_CONSTASCII_USTRINGPARAM( "Handles" ) ); pAny = ((SdrCustomShapeGeometryItem&)aGeometryItem).GetPropertyValueByName( sHandles ); if ( pAny && pDefCustomShape && pDefCustomShape->nHandles && pDefCustomShape->pHandles ) { com::sun::star::uno::Sequence< com::sun::star::beans::PropertyValues > seqHandles1, seqHandles2; if ( *pAny >>= seqHandles1 ) { sal_Int32 i, n, nCount = pDefCustomShape->nHandles; const SvxMSDffHandle* pData = pDefCustomShape->pHandles; seqHandles2.realloc( nCount ); for ( i = 0; i < nCount; i++, pData++ ) { sal_Int32 nPropertiesNeeded = 1; // position is always needed sal_Int32 nFlags = pData->nFlags; if ( nFlags & MSDFF_HANDLE_FLAGS_MIRRORED_X ) nPropertiesNeeded++; if ( nFlags & MSDFF_HANDLE_FLAGS_MIRRORED_Y ) nPropertiesNeeded++; if ( nFlags & MSDFF_HANDLE_FLAGS_SWITCHED ) nPropertiesNeeded++; if ( nFlags & MSDFF_HANDLE_FLAGS_POLAR ) { nPropertiesNeeded++; if ( nFlags & MSDFF_HANDLE_FLAGS_RADIUS_RANGE ) { if ( pData->nRangeXMin != DEFAULT_MINIMUM_SIGNED_COMPARE ) nPropertiesNeeded++; if ( pData->nRangeXMax != DEFAULT_MAXIMUM_SIGNED_COMPARE ) nPropertiesNeeded++; } } else if ( nFlags & MSDFF_HANDLE_FLAGS_RANGE ) { if ( pData->nRangeXMin != DEFAULT_MINIMUM_SIGNED_COMPARE ) nPropertiesNeeded++; if ( pData->nRangeXMax != DEFAULT_MAXIMUM_SIGNED_COMPARE ) nPropertiesNeeded++; if ( pData->nRangeYMin != DEFAULT_MINIMUM_SIGNED_COMPARE ) nPropertiesNeeded++; if ( pData->nRangeYMax != DEFAULT_MAXIMUM_SIGNED_COMPARE ) nPropertiesNeeded++; } n = 0; com::sun::star::beans::PropertyValues& rPropValues = seqHandles2[ i ]; rPropValues.realloc( nPropertiesNeeded ); // POSITION { const rtl::OUString sPosition( RTL_CONSTASCII_USTRINGPARAM ( "Position" ) ); ::com::sun::star::drawing::EnhancedCustomShapeParameterPair aPosition; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aPosition.First, pData->nPositionX, sal_True, sal_True ); EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aPosition.Second, pData->nPositionY, sal_True, sal_False ); rPropValues[ n ].Name = sPosition; rPropValues[ n++ ].Value <<= aPosition; } if ( nFlags & MSDFF_HANDLE_FLAGS_MIRRORED_X ) { const rtl::OUString sMirroredX( RTL_CONSTASCII_USTRINGPARAM ( "MirroredX" ) ); sal_Bool bMirroredX = sal_True; rPropValues[ n ].Name = sMirroredX; rPropValues[ n++ ].Value <<= bMirroredX; } if ( nFlags & MSDFF_HANDLE_FLAGS_MIRRORED_Y ) { const rtl::OUString sMirroredY( RTL_CONSTASCII_USTRINGPARAM ( "MirroredY" ) ); sal_Bool bMirroredY = sal_True; rPropValues[ n ].Name = sMirroredY; rPropValues[ n++ ].Value <<= bMirroredY; } if ( nFlags & MSDFF_HANDLE_FLAGS_SWITCHED ) { const rtl::OUString sSwitched( RTL_CONSTASCII_USTRINGPARAM ( "Switched" ) ); sal_Bool bSwitched = sal_True; rPropValues[ n ].Name = sSwitched; rPropValues[ n++ ].Value <<= bSwitched; } if ( nFlags & MSDFF_HANDLE_FLAGS_POLAR ) { const rtl::OUString sPolar( RTL_CONSTASCII_USTRINGPARAM ( "Polar" ) ); ::com::sun::star::drawing::EnhancedCustomShapeParameterPair aCenter; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aCenter.First, pData->nCenterX, ( nFlags & MSDFF_HANDLE_FLAGS_CENTER_X_IS_SPECIAL ) != 0, sal_True ); EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aCenter.Second, pData->nCenterY, ( nFlags & MSDFF_HANDLE_FLAGS_CENTER_Y_IS_SPECIAL ) != 0, sal_False ); rPropValues[ n ].Name = sPolar; rPropValues[ n++ ].Value <<= aCenter; if ( nFlags & MSDFF_HANDLE_FLAGS_RADIUS_RANGE ) { if ( pData->nRangeXMin != DEFAULT_MINIMUM_SIGNED_COMPARE ) { const rtl::OUString sRadiusRangeMinimum( RTL_CONSTASCII_USTRINGPARAM ( "RadiusRangeMinimum" ) ); ::com::sun::star::drawing::EnhancedCustomShapeParameter aRadiusRangeMinimum; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRadiusRangeMinimum, pData->nRangeXMin, ( nFlags & MSDFF_HANDLE_FLAGS_RANGE_X_MIN_IS_SPECIAL ) != 0, sal_True ); rPropValues[ n ].Name = sRadiusRangeMinimum; rPropValues[ n++ ].Value <<= aRadiusRangeMinimum; } if ( pData->nRangeXMax != DEFAULT_MAXIMUM_SIGNED_COMPARE ) { const rtl::OUString sRadiusRangeMaximum( RTL_CONSTASCII_USTRINGPARAM ( "RadiusRangeMaximum" ) ); ::com::sun::star::drawing::EnhancedCustomShapeParameter aRadiusRangeMaximum; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRadiusRangeMaximum, pData->nRangeXMax, ( nFlags & MSDFF_HANDLE_FLAGS_RANGE_X_MAX_IS_SPECIAL ) != 0, sal_False ); rPropValues[ n ].Name = sRadiusRangeMaximum; rPropValues[ n++ ].Value <<= aRadiusRangeMaximum; } } } else if ( nFlags & MSDFF_HANDLE_FLAGS_RANGE ) { if ( pData->nRangeXMin != DEFAULT_MINIMUM_SIGNED_COMPARE ) { const rtl::OUString sRangeXMinimum( RTL_CONSTASCII_USTRINGPARAM ( "RangeXMinimum" ) ); ::com::sun::star::drawing::EnhancedCustomShapeParameter aRangeXMinimum; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRangeXMinimum, pData->nRangeXMin, ( nFlags & MSDFF_HANDLE_FLAGS_RANGE_X_MIN_IS_SPECIAL ) != 0, sal_True ); rPropValues[ n ].Name = sRangeXMinimum; rPropValues[ n++ ].Value <<= aRangeXMinimum; } if ( pData->nRangeXMax != DEFAULT_MAXIMUM_SIGNED_COMPARE ) { const rtl::OUString sRangeXMaximum( RTL_CONSTASCII_USTRINGPARAM ( "RangeXMaximum" ) ); ::com::sun::star::drawing::EnhancedCustomShapeParameter aRangeXMaximum; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRangeXMaximum, pData->nRangeXMax, ( nFlags & MSDFF_HANDLE_FLAGS_RANGE_X_MAX_IS_SPECIAL ) != 0, sal_False ); rPropValues[ n ].Name = sRangeXMaximum; rPropValues[ n++ ].Value <<= aRangeXMaximum; } if ( pData->nRangeYMin != DEFAULT_MINIMUM_SIGNED_COMPARE ) { const rtl::OUString sRangeYMinimum( RTL_CONSTASCII_USTRINGPARAM ( "RangeYMinimum" ) ); ::com::sun::star::drawing::EnhancedCustomShapeParameter aRangeYMinimum; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRangeYMinimum, pData->nRangeYMin, ( nFlags & MSDFF_HANDLE_FLAGS_RANGE_Y_MIN_IS_SPECIAL ) != 0, sal_True ); rPropValues[ n ].Name = sRangeYMinimum; rPropValues[ n++ ].Value <<= aRangeYMinimum; } if ( pData->nRangeYMax != DEFAULT_MAXIMUM_SIGNED_COMPARE ) { const rtl::OUString sRangeYMaximum( RTL_CONSTASCII_USTRINGPARAM ( "RangeYMaximum" ) ); ::com::sun::star::drawing::EnhancedCustomShapeParameter aRangeYMaximum; EnhancedCustomShape2d::SetEnhancedCustomShapeHandleParameter( aRangeYMaximum, pData->nRangeYMax, ( nFlags & MSDFF_HANDLE_FLAGS_RANGE_Y_MAX_IS_SPECIAL ) != 0, sal_False ); rPropValues[ n ].Name = sRangeYMaximum; rPropValues[ n++ ].Value <<= aRangeYMaximum; } } } if ( seqHandles1 == seqHandles2 ) bIsDefaultGeometry = sal_True; } } else if ( pDefCustomShape && ( ( pDefCustomShape->nHandles == 0 ) || ( pDefCustomShape->pHandles == 0 ) ) ) bIsDefaultGeometry = sal_True; } break; } return bIsDefaultGeometry; } void SdrObjCustomShape::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const { rInfo.bResizeFreeAllowed=fObjectRotation == 0.0; rInfo.bResizePropAllowed=sal_True; rInfo.bRotateFreeAllowed=sal_True; rInfo.bRotate90Allowed =sal_True; rInfo.bMirrorFreeAllowed=sal_True; rInfo.bMirror45Allowed =sal_True; rInfo.bMirror90Allowed =sal_True; rInfo.bTransparenceAllowed = sal_False; rInfo.bGradientAllowed = sal_False; rInfo.bShearAllowed =sal_True; rInfo.bEdgeRadiusAllowed=sal_False; rInfo.bNoContortion =sal_True; // #i37011# if ( mXRenderedCustomShape.is() ) { const SdrObject* pRenderedCustomShape = GetSdrObjectFromXShape( mXRenderedCustomShape ); if ( pRenderedCustomShape ) { // #i37262# // Iterate self over the contained objects, since there are combinations of // polygon and curve objects. In that case, aInfo.bCanConvToPath and // aInfo.bCanConvToPoly would be false. What is needed here is an or, not an and. SdrObjListIter aIterator(*pRenderedCustomShape); while(aIterator.IsMore()) { SdrObject* pCandidate = aIterator.Next(); SdrObjTransformInfoRec aInfo; pCandidate->TakeObjInfo(aInfo); // set path and poly conversion if one is possible since // this object will first be broken const sal_Bool bCanConvToPathOrPoly(aInfo.bCanConvToPath || aInfo.bCanConvToPoly); if(rInfo.bCanConvToPath != bCanConvToPathOrPoly) { rInfo.bCanConvToPath = bCanConvToPathOrPoly; } if(rInfo.bCanConvToPoly != bCanConvToPathOrPoly) { rInfo.bCanConvToPoly = bCanConvToPathOrPoly; } if(rInfo.bCanConvToContour != aInfo.bCanConvToContour) { rInfo.bCanConvToContour = aInfo.bCanConvToContour; } } } } } void SdrObjCustomShape::SetModel(SdrModel* pNewModel) { SdrTextObj::SetModel(pNewModel); mXRenderedCustomShape.clear(); } sal_uInt16 SdrObjCustomShape::GetObjIdentifier() const { return sal_uInt16(OBJ_CUSTOMSHAPE); } //////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////////////////////////// void SdrObjCustomShape::RecalcSnapRect() { SdrTextObj::RecalcSnapRect(); } const Rectangle& SdrObjCustomShape::GetSnapRect() const { return SdrTextObj::GetSnapRect(); } const Rectangle& SdrObjCustomShape::GetCurrentBoundRect() const { return SdrTextObj::GetCurrentBoundRect(); } const Rectangle& SdrObjCustomShape::GetLogicRect() const { return SdrTextObj::GetLogicRect(); } void SdrObjCustomShape::NbcSetSnapRect( const Rectangle& rRect ) { aRect=rRect; ImpJustifyRect(aRect); InvalidateRenderGeometry(); Rectangle aTextBound( aRect ); if ( GetTextBounds( aTextBound ) ) { if ( pModel==NULL || !pModel->IsPasteResize() ) { long nHDist=GetTextLeftDistance()+GetTextRightDistance(); long nVDist=GetTextUpperDistance()+GetTextLowerDistance(); long nTWdt=aTextBound.GetWidth ()-1-nHDist; if (nTWdt<0) nTWdt=0; long nTHgt=aTextBound.GetHeight()-1-nVDist; if (nTHgt<0) nTHgt=0; if ( IsAutoGrowWidth() ) NbcSetMinTextFrameWidth( nTWdt ); if ( IsAutoGrowHeight() ) NbcSetMinTextFrameHeight( nTHgt ); NbcAdjustTextFrameWidthAndHeight(); } } ImpCheckShear(); SetRectsDirty(); SetChanged(); } void SdrObjCustomShape::SetSnapRect( const Rectangle& rRect ) { Rectangle aBoundRect0; if ( pUserCall ) aBoundRect0 = GetLastBoundRect(); NbcSetSnapRect( rRect ); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } void SdrObjCustomShape::NbcSetLogicRect( const Rectangle& rRect ) { aRect = rRect; ImpJustifyRect( aRect ); InvalidateRenderGeometry(); Rectangle aTextBound( aRect ); if ( GetTextBounds( aTextBound ) ) { long nHDist=GetTextLeftDistance()+GetTextRightDistance(); long nVDist=GetTextUpperDistance()+GetTextLowerDistance(); long nTWdt=aTextBound.GetWidth()-1-nHDist; if (nTWdt<0) nTWdt=0; long nTHgt=aTextBound.GetHeight()-1-nVDist; if (nTHgt<0) nTHgt=0; if ( IsAutoGrowWidth() ) NbcSetMinTextFrameWidth( nTWdt ); if ( IsAutoGrowHeight() ) NbcSetMinTextFrameHeight( nTHgt ); NbcAdjustTextFrameWidthAndHeight(); } SetRectsDirty(); SetChanged(); } void SdrObjCustomShape::SetLogicRect( const Rectangle& rRect ) { Rectangle aBoundRect0; if ( pUserCall ) aBoundRect0 = GetLastBoundRect(); NbcSetLogicRect(rRect); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } void SdrObjCustomShape::Move( const Size& rSiz ) { if ( rSiz.Width() || rSiz.Height() ) { Rectangle aBoundRect0; if ( pUserCall ) aBoundRect0 = GetLastBoundRect(); // #110094#-14 SendRepaintBroadcast(); NbcMove(rSiz); SetChanged(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_MOVEONLY,aBoundRect0); } } void SdrObjCustomShape::NbcMove( const Size& rSiz ) { SdrTextObj::NbcMove( rSiz ); if ( mXRenderedCustomShape.is() ) { SdrObject* pRenderedCustomShape = GetSdrObjectFromXShape( mXRenderedCustomShape ); if ( pRenderedCustomShape ) { // #i97149# the visualisation shape needs to be informed // about change, too pRenderedCustomShape->ActionChanged(); pRenderedCustomShape->NbcMove( rSiz ); } } // #i37011# adapt geometry shadow if(mpLastShadowGeometry) { mpLastShadowGeometry->NbcMove( rSiz ); } } void SdrObjCustomShape::Resize( const Point& rRef, const Fraction& xFact, const Fraction& yFact ) { SdrTextObj::Resize( rRef, xFact, yFact ); } void SdrObjCustomShape::NbcResize( const Point& rRef, const Fraction& rxFact, const Fraction& ryFact ) { Fraction xFact( rxFact ); Fraction yFact( ryFact ); // taking care of handles that should not been changed Rectangle aOld( aRect ); std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles( this ) ); SdrTextObj::NbcResize( rRef, xFact, yFact ); if ( ( xFact.GetNumerator() != xFact.GetDenominator() ) || ( yFact.GetNumerator()!= yFact.GetDenominator() ) ) { if ( ( ( xFact.GetNumerator() < 0 ) && ( xFact.GetDenominator() > 0 ) ) || ( ( xFact.GetNumerator() > 0 ) && ( xFact.GetDenominator() < 0 ) ) ) { SetMirroredX( IsMirroredX() == sal_False ); } if ( ( ( yFact.GetNumerator() < 0 ) && ( yFact.GetDenominator() > 0 ) ) || ( ( yFact.GetNumerator() > 0 ) && ( yFact.GetDenominator() < 0 ) ) ) { SetMirroredY( IsMirroredY() == sal_False ); } } std::vector< SdrCustomShapeInteraction >::iterator aIter( aInteractionHandles.begin() ); while ( aIter != aInteractionHandles.end() ) { try { if ( aIter->nMode & CUSTOMSHAPE_HANDLE_RESIZE_FIXED ) aIter->xInteraction->setControllerPosition( aIter->aPosition ); if ( aIter->nMode & CUSTOMSHAPE_HANDLE_RESIZE_ABSOLUTE_X ) { sal_Int32 nX = ( aIter->aPosition.X - aOld.Left() ) + aRect.Left(); aIter->xInteraction->setControllerPosition( com::sun::star::awt::Point( nX, aIter->xInteraction->getPosition().Y ) ); } if ( aIter->nMode & CUSTOMSHAPE_HANDLE_RESIZE_ABSOLUTE_Y ) { sal_Int32 nY = ( aIter->aPosition.Y - aOld.Top() ) + aRect.Top(); aIter->xInteraction->setControllerPosition( com::sun::star::awt::Point( aIter->xInteraction->getPosition().X, nY ) ); } } catch ( const uno::RuntimeException& ) { } aIter++; } InvalidateRenderGeometry(); } void SdrObjCustomShape::NbcRotate( const Point& rRef, long nWink, double sn, double cs ) { sal_Bool bMirroredX = IsMirroredX(); sal_Bool bMirroredY = IsMirroredY(); fObjectRotation = fmod( fObjectRotation, 360.0 ); if ( fObjectRotation < 0 ) fObjectRotation = 360 + fObjectRotation; // the rotation angle for ashapes is stored in fObjectRotation, this rotation // has to be applied to the text object (which is internally using aGeo.nWink). SdrTextObj::NbcRotate( aRect.TopLeft(), -aGeo.nDrehWink, // retrieving the unrotated text object sin( (-aGeo.nDrehWink) * F_PI18000 ), cos( (-aGeo.nDrehWink) * F_PI18000 ) ); aGeo.nDrehWink = 0; // resetting aGeo data aGeo.RecalcSinCos(); long nW = (long)( fObjectRotation * 100 ); // applying our object rotation if ( bMirroredX ) nW = 36000 - nW; if ( bMirroredY ) nW = 18000 - nW; nW = nW % 36000; if ( nW < 0 ) nW = 36000 + nW; SdrTextObj::NbcRotate( aRect.TopLeft(), nW, // applying text rotation sin( nW * F_PI18000 ), cos( nW * F_PI18000 ) ); int nSwap = 0; if ( bMirroredX ) nSwap ^= 1; if ( bMirroredY ) nSwap ^= 1; double fWink = nWink; // updating to our new object rotation fWink /= 100.0; fObjectRotation = fmod( nSwap ? fObjectRotation - fWink : fObjectRotation + fWink, 360.0 ); if ( fObjectRotation < 0 ) fObjectRotation = 360 + fObjectRotation; SdrTextObj::NbcRotate( rRef, nWink, sn, cs ); // applying text rotation InvalidateRenderGeometry(); } void SdrObjCustomShape::NbcMirror( const Point& rRef1, const Point& rRef2 ) { // storing horizontal and vertical flipping without modifying the rotate angle sal_Bool bHorz = sal_False; sal_Bool bVert = sal_False; if ( rRef1.X() == rRef2.X() ) bHorz = sal_True; if ( rRef1.Y() == rRef2.Y() ) bVert = sal_True; if ( !bHorz && !bVert ) bHorz = bVert = sal_True; if ( bHorz || bVert ) { SdrCustomShapeGeometryItem aGeometryItem( (SdrCustomShapeGeometryItem&)GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ); ///////////////// // "MirroredX" // ///////////////// if ( bHorz ) { const rtl::OUString sMirroredX( RTL_CONSTASCII_USTRINGPARAM ( "MirroredX" ) ); com::sun::star::uno::Any* pAny = aGeometryItem.GetPropertyValueByName( sMirroredX ); if ( pAny ) { sal_Bool bFlip = sal_Bool(); if ( *pAny >>= bFlip ) { if ( bFlip ) bHorz = sal_False; } } PropertyValue aPropVal; aPropVal.Name = sMirroredX; aPropVal.Value <<= bHorz; aGeometryItem.SetPropertyValue( aPropVal ); } ///////////////// // "MirroredY" // ///////////////// if ( bVert ) { const rtl::OUString sMirroredY( RTL_CONSTASCII_USTRINGPARAM ( "MirroredY" ) ); com::sun::star::uno::Any* pAny = aGeometryItem.GetPropertyValueByName( sMirroredY ); if ( pAny ) { sal_Bool bFlip = sal_Bool(); if ( *pAny >>= bFlip ) { if ( bFlip ) bVert = sal_False; } } PropertyValue aPropVal; aPropVal.Name = sMirroredY; aPropVal.Value <<= bVert; aGeometryItem.SetPropertyValue( aPropVal ); } SetMergedItem( aGeometryItem ); } SdrTextObj::NbcMirror( rRef1, rRef2 ); InvalidateRenderGeometry(); } void SdrObjCustomShape::Shear( const Point& rRef, long nWink, double tn, FASTBOOL bVShear ) { SdrTextObj::Shear( rRef, nWink, tn, bVShear ); InvalidateRenderGeometry(); } void SdrObjCustomShape::NbcShear( const Point& rRef, long nWink, double tn, FASTBOOL bVShear ) { long nDrehWink = aGeo.nDrehWink; if ( nDrehWink ) { aGeo.nDrehWink = -nDrehWink; aGeo.RecalcSinCos(); NbcRotate( rRef, aGeo.nDrehWink, aGeo.nSin, aGeo.nCos ); } SdrTextObj::NbcShear(rRef,nWink,tn,bVShear); if ( nDrehWink ) { aGeo.nDrehWink = nDrehWink; aGeo.RecalcSinCos(); Rotate( rRef, aGeo.nDrehWink, aGeo.nSin, aGeo.nCos ); } InvalidateRenderGeometry(); } //////////////////////////////////////////////////////////////////////////////////////////////////// SdrGluePoint SdrObjCustomShape::GetVertexGluePoint(sal_uInt16 nPosNum) const { sal_Int32 nWdt = ImpGetLineWdt(); // #i25616# ((XLineWidthItem&)(GetObjectItem(XATTR_LINEWIDTH))).GetValue(); // #i25616# if(!LineIsOutsideGeometry()) { nWdt++; nWdt /= 2; } Point aPt; switch (nPosNum) { case 0: aPt=aRect.TopCenter(); aPt.Y()-=nWdt; break; case 1: aPt=aRect.RightCenter(); aPt.X()+=nWdt; break; case 2: aPt=aRect.BottomCenter(); aPt.Y()+=nWdt; break; case 3: aPt=aRect.LeftCenter(); aPt.X()-=nWdt; break; } if (aGeo.nShearWink!=0) ShearPoint(aPt,aRect.TopLeft(),aGeo.nTan); if (aGeo.nDrehWink!=0) RotatePoint(aPt,aRect.TopLeft(),aGeo.nSin,aGeo.nCos); aPt-=GetSnapRect().Center(); SdrGluePoint aGP(aPt); aGP.SetPercent(sal_False); return aGP; } //////////////////////////////////////////////////////////////////////////////////////////////////// // #i38892# void SdrObjCustomShape::ImpCheckCustomGluePointsAreAdded() { const SdrObject* pSdrObject = GetSdrObjectFromCustomShape(); if(pSdrObject) { const SdrGluePointList* pSource = pSdrObject->GetGluePointList(); if(pSource && pSource->GetCount()) { if(!SdrTextObj::GetGluePointList()) { SdrTextObj::ForceGluePointList(); } const SdrGluePointList* pList = SdrTextObj::GetGluePointList(); if(pList) { SdrGluePointList aNewList; sal_uInt16 a; for(a = 0; a < pSource->GetCount(); a++) { SdrGluePoint aCopy((*pSource)[a]); aCopy.SetUserDefined(sal_False); aNewList.Insert(aCopy); } sal_Bool bMirroredX = IsMirroredX(); sal_Bool bMirroredY = IsMirroredY(); long nShearWink = aGeo.nShearWink; double fTan = aGeo.nTan; if ( aGeo.nDrehWink || nShearWink || bMirroredX || bMirroredY ) { Polygon aPoly( aRect ); if( nShearWink ) { sal_uInt16 nPointCount=aPoly.GetSize(); for (sal_uInt16 i=0; iGetCount(); a++) { const SdrGluePoint& rCandidate = (*pList)[a]; if(rCandidate.IsUserDefined()) { aNewList.Insert(rCandidate); } } // copy new list to local. This is NOT very convenient behaviour, the local // GluePointList should not be set, but be delivered by using GetGluePointList(), // maybe on demand. Since the local object is changed here, this is assumed to // be a result of GetGluePointList and thus the list is copied if(pPlusData) { *pPlusData->pGluePoints = aNewList; } } } } } // #i38892# const SdrGluePointList* SdrObjCustomShape::GetGluePointList() const { ((SdrObjCustomShape*)this)->ImpCheckCustomGluePointsAreAdded(); return SdrTextObj::GetGluePointList(); } // #i38892# //SdrGluePointList* SdrObjCustomShape::GetGluePointList() //{ // ImpCheckCustomGluePointsAreAdded(); // return SdrTextObj::GetGluePointList(); //} // #i38892# SdrGluePointList* SdrObjCustomShape::ForceGluePointList() { if(SdrTextObj::ForceGluePointList()) { ImpCheckCustomGluePointsAreAdded(); return SdrTextObj::ForceGluePointList(); } else { return 0L; } } //////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////////////////////////// sal_uInt32 SdrObjCustomShape::GetHdlCount() const { const sal_uInt32 nBasicHdlCount(SdrTextObj::GetHdlCount()); std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles( this ) ); return ( aInteractionHandles.size() + nBasicHdlCount ); } SdrHdl* SdrObjCustomShape::GetHdl( sal_uInt32 nHdlNum ) const { SdrHdl* pH = NULL; const sal_uInt32 nBasicHdlCount(SdrTextObj::GetHdlCount()); if ( nHdlNum < nBasicHdlCount ) pH = SdrTextObj::GetHdl( nHdlNum ); else { std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles( this ) ); const sal_uInt32 nCustomShapeHdlNum(nHdlNum - nBasicHdlCount); if ( nCustomShapeHdlNum < aInteractionHandles.size() ) { if ( aInteractionHandles[ nCustomShapeHdlNum ].xInteraction.is() ) { try { com::sun::star::awt::Point aPosition( aInteractionHandles[ nCustomShapeHdlNum ].xInteraction->getPosition() ); pH = new SdrHdl( Point( aPosition.X, aPosition.Y ), HDL_CUSTOMSHAPE1 ); pH->SetPointNum( nCustomShapeHdlNum ); pH->SetObj( (SdrObject*)this ); } catch ( const uno::RuntimeException& ) { } } } } return pH; } //////////////////////////////////////////////////////////////////////////////////////////////////// bool SdrObjCustomShape::hasSpecialDrag() const { return true; } bool SdrObjCustomShape::beginSpecialDrag(SdrDragStat& rDrag) const { const SdrHdl* pHdl = rDrag.GetHdl(); if(pHdl && HDL_CUSTOMSHAPE1 == pHdl->GetKind()) { rDrag.SetEndDragChangesAttributes(true); rDrag.SetNoSnap(true); } else { const SdrHdl* pHdl2 = rDrag.GetHdl(); const SdrHdlKind eHdl((pHdl2 == NULL) ? HDL_MOVE : pHdl2->GetKind()); switch( eHdl ) { case HDL_UPLFT : case HDL_UPPER : case HDL_UPRGT : case HDL_LEFT : case HDL_RIGHT : case HDL_LWLFT : case HDL_LOWER : case HDL_LWRGT : case HDL_MOVE : { break; } default: { return false; } } } return true; } void SdrObjCustomShape::DragResizeCustomShape( const Rectangle& rNewRect, SdrObjCustomShape* pObj ) const { Rectangle aOld( pObj->aRect ); sal_Bool bOldMirroredX( pObj->IsMirroredX() ); sal_Bool bOldMirroredY( pObj->IsMirroredY() ); Rectangle aNewRect( rNewRect ); aNewRect.Justify(); std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles( pObj ) ); GeoStat aGeoStat( pObj->GetGeoStat() ); if ( aNewRect.TopLeft()!= pObj->aRect.TopLeft() && ( pObj->aGeo.nDrehWink || pObj->aGeo.nShearWink ) ) { Point aNewPos( aNewRect.TopLeft() ); if ( pObj->aGeo.nShearWink ) ShearPoint( aNewPos, aOld.TopLeft(), aGeoStat.nTan ); if ( pObj->aGeo.nDrehWink ) RotatePoint(aNewPos, aOld.TopLeft(), aGeoStat.nSin, aGeoStat.nCos ); aNewRect.SetPos( aNewPos ); } if ( aNewRect != pObj->aRect ) { pObj->SetLogicRect( aNewRect ); pObj->InvalidateRenderGeometry(); if ( rNewRect.Left() > rNewRect.Right() ) { Point aTop( ( pObj->GetSnapRect().Left() + pObj->GetSnapRect().Right() ) >> 1, pObj->GetSnapRect().Top() ); Point aBottom( aTop.X(), aTop.Y() + 1000 ); pObj->NbcMirror( aTop, aBottom ); } if ( rNewRect.Top() > rNewRect.Bottom() ) { Point aLeft( pObj->GetSnapRect().Left(), ( pObj->GetSnapRect().Top() + pObj->GetSnapRect().Bottom() ) >> 1 ); Point aRight( aLeft.X() + 1000, aLeft.Y() ); pObj->NbcMirror( aLeft, aRight ); } std::vector< SdrCustomShapeInteraction >::iterator aIter( aInteractionHandles.begin() ); while ( aIter != aInteractionHandles.end() ) { try { if ( aIter->nMode & CUSTOMSHAPE_HANDLE_RESIZE_FIXED ) aIter->xInteraction->setControllerPosition( aIter->aPosition ); if ( aIter->nMode & CUSTOMSHAPE_HANDLE_RESIZE_ABSOLUTE_X ) { sal_Int32 nX; if ( bOldMirroredX ) { nX = ( aIter->aPosition.X - aOld.Right() ); if ( rNewRect.Left() > rNewRect.Right() ) nX = pObj->aRect.Left() - nX; else nX += pObj->aRect.Right(); } else { nX = ( aIter->aPosition.X - aOld.Left() ); if ( rNewRect.Left() > rNewRect.Right() ) nX = pObj->aRect.Right() - nX; else nX += pObj->aRect.Left(); } aIter->xInteraction->setControllerPosition( com::sun::star::awt::Point( nX, aIter->xInteraction->getPosition().Y ) ); } if ( aIter->nMode & CUSTOMSHAPE_HANDLE_RESIZE_ABSOLUTE_Y ) { sal_Int32 nY; if ( bOldMirroredY ) { nY = ( aIter->aPosition.Y - aOld.Bottom() ); if ( rNewRect.Top() > rNewRect.Bottom() ) nY = pObj->aRect.Top() - nY; else nY += pObj->aRect.Bottom(); } else { nY = ( aIter->aPosition.Y - aOld.Top() ); if ( rNewRect.Top() > rNewRect.Bottom() ) nY = pObj->aRect.Bottom() - nY; else nY += pObj->aRect.Top(); } aIter->xInteraction->setControllerPosition( com::sun::star::awt::Point( aIter->xInteraction->getPosition().X, nY ) ); } } catch ( const uno::RuntimeException& ) { } aIter++; } } } void SdrObjCustomShape::DragMoveCustomShapeHdl( const Point aDestination, const sal_uInt16 nCustomShapeHdlNum, SdrObjCustomShape* pObj ) const { std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles( pObj ) ); if ( nCustomShapeHdlNum < aInteractionHandles.size() ) { SdrCustomShapeInteraction aInteractionHandle( aInteractionHandles[ nCustomShapeHdlNum ] ); if ( aInteractionHandle.xInteraction.is() ) { try { com::sun::star::awt::Point aPt( aDestination.X(), aDestination.Y() ); if ( aInteractionHandle.nMode & CUSTOMSHAPE_HANDLE_MOVE_SHAPE ) { sal_Int32 nXDiff = aPt.X - aInteractionHandle.aPosition.X; sal_Int32 nYDiff = aPt.Y - aInteractionHandle.aPosition.Y; pObj->aRect.Move( nXDiff, nYDiff ); pObj->aOutRect.Move( nXDiff, nYDiff ); pObj->maSnapRect.Move( nXDiff, nYDiff ); pObj->SetRectsDirty(sal_True); pObj->InvalidateRenderGeometry(); std::vector< SdrCustomShapeInteraction >::iterator aIter( aInteractionHandles.begin() ); while ( aIter != aInteractionHandles.end() ) { if ( aIter->nMode & CUSTOMSHAPE_HANDLE_RESIZE_FIXED ) { if ( aIter->xInteraction.is() ) aIter->xInteraction->setControllerPosition( aIter->aPosition ); } aIter++; } } aInteractionHandle.xInteraction->setControllerPosition( aPt ); } catch ( const uno::RuntimeException& ) { } } } } bool SdrObjCustomShape::applySpecialDrag(SdrDragStat& rDrag) { const SdrHdl* pHdl = rDrag.GetHdl(); const SdrHdlKind eHdl((pHdl == NULL) ? HDL_MOVE : pHdl->GetKind()); switch(eHdl) { case HDL_CUSTOMSHAPE1 : { rDrag.SetEndDragChangesGeoAndAttributes(true); DragMoveCustomShapeHdl( rDrag.GetNow(), (sal_uInt16)pHdl->GetPointNum(), this ); SetRectsDirty(); InvalidateRenderGeometry(); SetChanged(); break; } case HDL_UPLFT : case HDL_UPPER : case HDL_UPRGT : case HDL_LEFT : case HDL_RIGHT : case HDL_LWLFT : case HDL_LOWER : case HDL_LWRGT : { DragResizeCustomShape(ImpDragCalcRect(rDrag), this); break; } case HDL_MOVE : { Move(Size(rDrag.GetDX(), rDrag.GetDY())); break; } default: break; } return true; } //////////////////////////////////////////////////////////////////////////////////////////////////// void SdrObjCustomShape::DragCreateObject( SdrDragStat& rStat ) { Rectangle aRect1; rStat.TakeCreateRect( aRect1 ); std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles( this ) ); sal_uInt32 nDefaultObjectSizeWidth = 3000; // default width from SDOptions ? sal_uInt32 nDefaultObjectSizeHeight= 3000; if ( ImpVerticalSwitch( *this ) ) { SetMirroredX( aRect1.Left() > aRect1.Right() ); aRect1 = Rectangle( rStat.GetNow(), Size( nDefaultObjectSizeWidth, nDefaultObjectSizeHeight ) ); // subtracting the horizontal difference of the latest handle from shape position if ( !aInteractionHandles.empty() ) { sal_Int32 nHandlePos = aInteractionHandles[ aInteractionHandles.size() - 1 ].xInteraction->getPosition().X; aRect1.Move( aRect.Left() - nHandlePos, 0 ); } } ImpJustifyRect( aRect1 ); rStat.SetActionRect( aRect1 ); aRect = aRect1; SetRectsDirty(); std::vector< SdrCustomShapeInteraction >::iterator aIter( aInteractionHandles.begin() ); while ( aIter != aInteractionHandles.end() ) { try { if ( aIter->nMode & CUSTOMSHAPE_HANDLE_CREATE_FIXED ) aIter->xInteraction->setControllerPosition( awt::Point( rStat.GetStart().X(), rStat.GetStart().Y() ) ); } catch ( const uno::RuntimeException& ) { } aIter++; } SetBoundRectDirty(); bSnapRectDirty=sal_True; } FASTBOOL SdrObjCustomShape::BegCreate( SdrDragStat& rDrag ) { return SdrTextObj::BegCreate( rDrag ); } FASTBOOL SdrObjCustomShape::MovCreate(SdrDragStat& rStat) { SdrView* pView = rStat.GetView(); // #i37448# if( pView && pView->IsSolidDragging() ) { InvalidateRenderGeometry(); } DragCreateObject( rStat ); SetRectsDirty(); return sal_True; } FASTBOOL SdrObjCustomShape::EndCreate( SdrDragStat& rStat, SdrCreateCmd eCmd ) { DragCreateObject( rStat ); if ( bTextFrame ) { if ( IsAutoGrowHeight() ) { // MinTextHeight long nHgt=aRect.GetHeight()-1; if (nHgt==1) nHgt=0; NbcSetMinTextFrameHeight( nHgt ); } if ( IsAutoGrowWidth() ) { // MinTextWidth long nWdt=aRect.GetWidth()-1; if (nWdt==1) nWdt=0; NbcSetMinTextFrameWidth( nWdt ); } // Textrahmen neu berechnen NbcAdjustTextFrameWidthAndHeight(); } SetRectsDirty(); return ( eCmd == SDRCREATE_FORCEEND || rStat.GetPointAnz() >= 2 ); } basegfx::B2DPolyPolygon SdrObjCustomShape::TakeCreatePoly(const SdrDragStat& /*rDrag*/) const { return GetLineGeometry( this, sal_False ); } //////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////////////////////////// // in context with the SdrObjCustomShape the SdrTextAutoGrowHeightItem == true -> Resize Shape to fit text, // the SdrTextAutoGrowWidthItem == true -> Word wrap text in Shape FASTBOOL SdrObjCustomShape::IsAutoGrowHeight() const { const SfxItemSet& rSet = GetMergedItemSet(); FASTBOOL bIsAutoGrowHeight = ((SdrTextAutoGrowHeightItem&)(rSet.Get(SDRATTR_TEXT_AUTOGROWHEIGHT))).GetValue(); if ( bIsAutoGrowHeight && IsVerticalWriting() ) bIsAutoGrowHeight = ((SdrTextWordWrapItem&)(rSet.Get(SDRATTR_TEXT_WORDWRAP))).GetValue() == sal_False; return bIsAutoGrowHeight; } FASTBOOL SdrObjCustomShape::IsAutoGrowWidth() const { const SfxItemSet& rSet = GetMergedItemSet(); FASTBOOL bIsAutoGrowWidth = ((SdrTextAutoGrowHeightItem&)(rSet.Get(SDRATTR_TEXT_AUTOGROWHEIGHT))).GetValue(); if ( bIsAutoGrowWidth && !IsVerticalWriting() ) bIsAutoGrowWidth = ((SdrTextWordWrapItem&)(rSet.Get(SDRATTR_TEXT_WORDWRAP))).GetValue() == sal_False; return bIsAutoGrowWidth; } /* The following method is identical to the SdrTextObj::SetVerticalWriting method, the only difference is that the SdrAutoGrowWidthItem and SdrAutoGrowHeightItem are not exchanged if the vertical writing mode has been changed */ void SdrObjCustomShape::SetVerticalWriting( sal_Bool bVertical ) { ForceOutlinerParaObject(); OutlinerParaObject* pOutlinerParaObject = GetOutlinerParaObject(); DBG_ASSERT( pOutlinerParaObject, "SdrTextObj::SetVerticalWriting() without OutlinerParaObject!" ); if( pOutlinerParaObject ) { if(pOutlinerParaObject->IsVertical() != (bool)bVertical) { // get item settings const SfxItemSet& rSet = GetObjectItemSet(); // #103516# Also exchange hor/ver adjust items SdrTextHorzAdjust eHorz = ((SdrTextHorzAdjustItem&)(rSet.Get(SDRATTR_TEXT_HORZADJUST))).GetValue(); SdrTextVertAdjust eVert = ((SdrTextVertAdjustItem&)(rSet.Get(SDRATTR_TEXT_VERTADJUST))).GetValue(); // rescue object size Rectangle aObjectRect = GetSnapRect(); // prepare ItemSet to set exchanged width and height items SfxItemSet aNewSet(*rSet.GetPool(), SDRATTR_TEXT_AUTOGROWHEIGHT, SDRATTR_TEXT_AUTOGROWHEIGHT, // #103516# Expanded item ranges to also support hor and ver adjust. SDRATTR_TEXT_VERTADJUST, SDRATTR_TEXT_VERTADJUST, SDRATTR_TEXT_AUTOGROWWIDTH, SDRATTR_TEXT_HORZADJUST, 0, 0); aNewSet.Put(rSet); // #103516# Exchange horz and vert adjusts switch(eVert) { case SDRTEXTVERTADJUST_TOP: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_RIGHT)); break; case SDRTEXTVERTADJUST_CENTER: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_CENTER)); break; case SDRTEXTVERTADJUST_BOTTOM: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_LEFT)); break; case SDRTEXTVERTADJUST_BLOCK: aNewSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_BLOCK)); break; } switch(eHorz) { case SDRTEXTHORZADJUST_LEFT: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_BOTTOM)); break; case SDRTEXTHORZADJUST_CENTER: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_CENTER)); break; case SDRTEXTHORZADJUST_RIGHT: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_TOP)); break; case SDRTEXTHORZADJUST_BLOCK: aNewSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_BLOCK)); break; } SetObjectItemSet( aNewSet ); pOutlinerParaObject = GetOutlinerParaObject(); if ( pOutlinerParaObject ) pOutlinerParaObject->SetVertical(bVertical); // restore object size SetSnapRect(aObjectRect); } } } FASTBOOL SdrObjCustomShape::AdjustTextFrameWidthAndHeight(Rectangle& rR, FASTBOOL bHgt, FASTBOOL bWdt) const { if ( pModel && HasText() && !rR.IsEmpty() ) { FASTBOOL bWdtGrow=bWdt && IsAutoGrowWidth(); FASTBOOL bHgtGrow=bHgt && IsAutoGrowHeight(); if ( bWdtGrow || bHgtGrow ) { Rectangle aR0(rR); long nHgt=0,nMinHgt=0,nMaxHgt=0; long nWdt=0,nMinWdt=0,nMaxWdt=0; Size aSiz(rR.GetSize()); aSiz.Width()--; aSiz.Height()--; Size aMaxSiz(100000,100000); Size aTmpSiz(pModel->GetMaxObjSize()); if (aTmpSiz.Width()!=0) aMaxSiz.Width()=aTmpSiz.Width(); if (aTmpSiz.Height()!=0) aMaxSiz.Height()=aTmpSiz.Height(); if (bWdtGrow) { nMinWdt=GetMinTextFrameWidth(); nMaxWdt=GetMaxTextFrameWidth(); if (nMaxWdt==0 || nMaxWdt>aMaxSiz.Width()) nMaxWdt=aMaxSiz.Width(); if (nMinWdt<=0) nMinWdt=1; aSiz.Width()=nMaxWdt; } if (bHgtGrow) { nMinHgt=GetMinTextFrameHeight(); nMaxHgt=GetMaxTextFrameHeight(); if (nMaxHgt==0 || nMaxHgt>aMaxSiz.Height()) nMaxHgt=aMaxSiz.Height(); if (nMinHgt<=0) nMinHgt=1; aSiz.Height()=nMaxHgt; } long nHDist=GetTextLeftDistance()+GetTextRightDistance(); long nVDist=GetTextUpperDistance()+GetTextLowerDistance(); aSiz.Width()-=nHDist; aSiz.Height()-=nVDist; if ( aSiz.Width() < 2 ) aSiz.Width() = 2; // Mindestgroesse 2 if ( aSiz.Height() < 2 ) aSiz.Height() = 2; // Mindestgroesse 2 if(pEdtOutl) { pEdtOutl->SetMaxAutoPaperSize( aSiz ); if (bWdtGrow) { Size aSiz2(pEdtOutl->CalcTextSize()); nWdt=aSiz2.Width()+1; // lieber etwas Tolleranz if (bHgtGrow) nHgt=aSiz2.Height()+1; // lieber etwas Tolleranz } else { nHgt=pEdtOutl->GetTextHeight()+1; // lieber etwas Tolleranz } } else { Outliner& rOutliner=ImpGetDrawOutliner(); rOutliner.SetPaperSize(aSiz); rOutliner.SetUpdateMode(sal_True); // !!! hier sollte ich wohl auch noch mal die Optimierung mit // bPortionInfoChecked usw einbauen OutlinerParaObject* pOutlinerParaObject = GetOutlinerParaObject(); if( pOutlinerParaObject != NULL ) { rOutliner.SetText(*pOutlinerParaObject); rOutliner.SetFixedCellHeight(((const SdrTextFixedCellHeightItem&)GetMergedItem(SDRATTR_TEXT_USEFIXEDCELLHEIGHT)).GetValue()); } if ( bWdtGrow ) { Size aSiz2(rOutliner.CalcTextSize()); nWdt=aSiz2.Width()+1; // lieber etwas Tolleranz if ( bHgtGrow ) nHgt=aSiz2.Height()+1; // lieber etwas Tolleranz } else nHgt = rOutliner.GetTextHeight()+1; // lieber etwas Tolleranz rOutliner.Clear(); } if ( nWdt < nMinWdt ) nWdt = nMinWdt; if ( nWdt > nMaxWdt ) nWdt = nMaxWdt; nWdt += nHDist; if ( nWdt < 1 ) nWdt = 1; // nHDist kann auch negativ sein if ( nHgt < nMinHgt ) nHgt = nMinHgt; if ( nHgt > nMaxHgt ) nHgt = nMaxHgt; nHgt+=nVDist; if ( nHgt < 1 ) nHgt = 1; // nVDist kann auch negativ sein long nWdtGrow = nWdt-(rR.Right()-rR.Left()); long nHgtGrow = nHgt-(rR.Bottom()-rR.Top()); if ( nWdtGrow == 0 ) bWdtGrow = sal_False; if ( nHgtGrow == 0 ) bHgtGrow=sal_False; if ( bWdtGrow || bHgtGrow ) { if ( bWdtGrow ) { SdrTextHorzAdjust eHAdj=GetTextHorizontalAdjust(); if ( eHAdj == SDRTEXTHORZADJUST_LEFT ) rR.Right()+=nWdtGrow; else if ( eHAdj == SDRTEXTHORZADJUST_RIGHT ) rR.Left()-=nWdtGrow; else { long nWdtGrow2=nWdtGrow/2; rR.Left()-=nWdtGrow2; rR.Right()=rR.Left()+nWdt; } } if ( bHgtGrow ) { SdrTextVertAdjust eVAdj=GetTextVerticalAdjust(); if ( eVAdj == SDRTEXTVERTADJUST_TOP ) rR.Bottom()+=nHgtGrow; else if ( eVAdj == SDRTEXTVERTADJUST_BOTTOM ) rR.Top()-=nHgtGrow; else { long nHgtGrow2=nHgtGrow/2; rR.Top()-=nHgtGrow2; rR.Bottom()=rR.Top()+nHgt; } } if ( aGeo.nDrehWink ) { Point aD1(rR.TopLeft()); aD1-=aR0.TopLeft(); Point aD2(aD1); RotatePoint(aD2,Point(),aGeo.nSin,aGeo.nCos); aD2-=aD1; rR.Move(aD2.X(),aD2.Y()); } return sal_True; } } } return sal_False; } Rectangle SdrObjCustomShape::ImpCalculateTextFrame( const FASTBOOL bHgt, const FASTBOOL bWdt ) { Rectangle aReturnValue; Rectangle aOldTextRect( aRect ); // <- initial text rectangle Rectangle aNewTextRect( aRect ); // <- new text rectangle returned from the custom shape renderer, GetTextBounds( aNewTextRect ); // it depends to the current logical shape size Rectangle aAdjustedTextRect( aNewTextRect ); // <- new text rectangle is being tested by AdjustTextFrameWidthAndHeight to ensure if ( AdjustTextFrameWidthAndHeight( aAdjustedTextRect, bHgt, bWdt ) ) // that the new text rectangle is matching the current text size from the outliner { if ( ( aAdjustedTextRect != aNewTextRect ) && ( aOldTextRect != aAdjustedTextRect ) ) { aReturnValue = aRect; double fXScale = (double)aOldTextRect.GetWidth() / (double)aNewTextRect.GetWidth(); double fYScale = (double)aOldTextRect.GetHeight() / (double)aNewTextRect.GetHeight(); double fRightDiff = (double)( aAdjustedTextRect.Right() - aNewTextRect.Right() ) * fXScale; double fLeftDiff = (double)( aAdjustedTextRect.Left() - aNewTextRect.Left() ) * fXScale; double fTopDiff = (double)( aAdjustedTextRect.Top() - aNewTextRect.Top() ) * fYScale; double fBottomDiff= (double)( aAdjustedTextRect.Bottom()- aNewTextRect.Bottom()) * fYScale; aReturnValue.Left() += (sal_Int32)fLeftDiff; aReturnValue.Right() += (sal_Int32)fRightDiff; aReturnValue.Top() += (sal_Int32)fTopDiff; aReturnValue.Bottom() += (sal_Int32)fBottomDiff; } } return aReturnValue; } FASTBOOL SdrObjCustomShape::NbcAdjustTextFrameWidthAndHeight(FASTBOOL bHgt, FASTBOOL bWdt) { Rectangle aNewTextRect = ImpCalculateTextFrame( bHgt, bWdt ); sal_Bool bRet = !aNewTextRect.IsEmpty() && ( aNewTextRect != aRect ); if ( bRet ) { // taking care of handles that should not been changed std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles( this ) ); aRect = aNewTextRect; SetRectsDirty(); SetChanged(); std::vector< SdrCustomShapeInteraction >::iterator aIter( aInteractionHandles.begin() ); while ( aIter != aInteractionHandles.end() ) { try { if ( aIter->nMode & CUSTOMSHAPE_HANDLE_RESIZE_FIXED ) aIter->xInteraction->setControllerPosition( aIter->aPosition ); } catch ( const uno::RuntimeException& ) { } aIter++; } InvalidateRenderGeometry(); } return bRet; } FASTBOOL SdrObjCustomShape::AdjustTextFrameWidthAndHeight(FASTBOOL bHgt, FASTBOOL bWdt) { Rectangle aNewTextRect = ImpCalculateTextFrame( bHgt, bWdt ); sal_Bool bRet = !aNewTextRect.IsEmpty() && ( aNewTextRect != aRect ); if ( bRet ) { Rectangle aBoundRect0; if ( pUserCall ) aBoundRect0 = GetCurrentBoundRect(); // taking care of handles that should not been changed std::vector< SdrCustomShapeInteraction > aInteractionHandles( GetInteractionHandles( this ) ); // SendRepaintBroadcast(); aRect = aNewTextRect; SetRectsDirty(); std::vector< SdrCustomShapeInteraction >::iterator aIter( aInteractionHandles.begin() ); while ( aIter != aInteractionHandles.end() ) { try { if ( aIter->nMode & CUSTOMSHAPE_HANDLE_RESIZE_FIXED ) aIter->xInteraction->setControllerPosition( aIter->aPosition ); } catch ( const uno::RuntimeException& ) { } aIter++; } InvalidateRenderGeometry(); SetChanged(); // SendRepaintBroadcast(); BroadcastObjectChange(); SendUserCall(SDRUSERCALL_RESIZE,aBoundRect0); } return bRet; } sal_Bool SdrObjCustomShape::BegTextEdit( SdrOutliner& rOutl ) { return SdrTextObj::BegTextEdit( rOutl ); } void SdrObjCustomShape::TakeTextEditArea(Size* pPaperMin, Size* pPaperMax, Rectangle* pViewInit, Rectangle* pViewMin) const { Size aPaperMin,aPaperMax; Rectangle aViewInit; TakeTextAnchorRect( aViewInit ); if ( aGeo.nDrehWink ) { Point aCenter(aViewInit.Center()); aCenter-=aViewInit.TopLeft(); Point aCenter0(aCenter); RotatePoint(aCenter,Point(),aGeo.nSin,aGeo.nCos); aCenter-=aCenter0; aViewInit.Move(aCenter.X(),aCenter.Y()); } Size aAnkSiz(aViewInit.GetSize()); aAnkSiz.Width()--; aAnkSiz.Height()--; // weil GetSize() ein draufaddiert Size aMaxSiz(1000000,1000000); if (pModel!=NULL) { Size aTmpSiz(pModel->GetMaxObjSize()); if (aTmpSiz.Width()!=0) aMaxSiz.Width()=aTmpSiz.Width(); if (aTmpSiz.Height()!=0) aMaxSiz.Height()=aTmpSiz.Height(); } SdrTextHorzAdjust eHAdj(GetTextHorizontalAdjust()); SdrTextVertAdjust eVAdj(GetTextVerticalAdjust()); long nMinWdt = GetMinTextFrameWidth(); long nMinHgt = GetMinTextFrameHeight(); long nMaxWdt = GetMaxTextFrameWidth(); long nMaxHgt = GetMaxTextFrameHeight(); if (nMinWdt<1) nMinWdt=1; if (nMinHgt<1) nMinHgt=1; if ( nMaxWdt == 0 || nMaxWdt > aMaxSiz.Width() ) nMaxWdt = aMaxSiz.Width(); if ( nMaxHgt == 0 || nMaxHgt > aMaxSiz.Height() ) nMaxHgt=aMaxSiz.Height(); if (((SdrTextWordWrapItem&)(GetMergedItem(SDRATTR_TEXT_WORDWRAP))).GetValue()) { if ( IsVerticalWriting() ) { nMaxHgt = aAnkSiz.Height(); nMinHgt = nMaxHgt; } else { nMaxWdt = aAnkSiz.Width(); nMinWdt = nMaxWdt; } } aPaperMax.Width()=nMaxWdt; aPaperMax.Height()=nMaxHgt; aPaperMin.Width()=nMinWdt; aPaperMin.Height()=nMinHgt; if ( pViewMin ) { *pViewMin = aViewInit; long nXFree = aAnkSiz.Width() - aPaperMin.Width(); if ( eHAdj == SDRTEXTHORZADJUST_LEFT ) pViewMin->Right() -= nXFree; else if ( eHAdj == SDRTEXTHORZADJUST_RIGHT ) pViewMin->Left() += nXFree; else { pViewMin->Left() += nXFree / 2; pViewMin->Right() = pViewMin->Left() + aPaperMin.Width(); } long nYFree = aAnkSiz.Height() - aPaperMin.Height(); if ( eVAdj == SDRTEXTVERTADJUST_TOP ) pViewMin->Bottom() -= nYFree; else if ( eVAdj == SDRTEXTVERTADJUST_BOTTOM ) pViewMin->Top() += nYFree; else { pViewMin->Top() += nYFree / 2; pViewMin->Bottom() = pViewMin->Top() + aPaperMin.Height(); } } if( IsVerticalWriting() ) aPaperMin.Width() = 0; else aPaperMin.Height() = 0; // #33102# if( eHAdj != SDRTEXTHORZADJUST_BLOCK ) aPaperMin.Width()=0; // #103516# For complete ver adjust support, set paper min height to 0, here. if(SDRTEXTVERTADJUST_BLOCK != eVAdj ) aPaperMin.Height() = 0; if (pPaperMin!=NULL) *pPaperMin=aPaperMin; if (pPaperMax!=NULL) *pPaperMax=aPaperMax; if (pViewInit!=NULL) *pViewInit=aViewInit; } void SdrObjCustomShape::EndTextEdit( SdrOutliner& rOutl ) { SdrTextObj::EndTextEdit( rOutl ); InvalidateRenderGeometry(); } void SdrObjCustomShape::TakeTextAnchorRect( Rectangle& rAnchorRect ) const { if ( GetTextBounds( rAnchorRect ) ) { Point aRotateRef( maSnapRect.Center() ); rAnchorRect.Left() += GetTextLeftDistance(); rAnchorRect.Top() += GetTextUpperDistance(); rAnchorRect.Right() -= GetTextRightDistance(); rAnchorRect.Bottom() -= GetTextLowerDistance(); ImpJustifyRect( rAnchorRect ); if ( rAnchorRect.GetWidth() < 2 ) rAnchorRect.Right() = rAnchorRect.Left() + 1; // minimal width is 2 if ( rAnchorRect.GetHeight() < 2 ) rAnchorRect.Bottom() = rAnchorRect.Top() + 1; // minimal height is 2 if ( aGeo.nDrehWink ) { Point aP( rAnchorRect.TopLeft() ); RotatePoint( aP, aRotateRef, aGeo.nSin, aGeo. nCos ); rAnchorRect.SetPos( aP ); } } else SdrTextObj::TakeTextAnchorRect( rAnchorRect ); } void SdrObjCustomShape::TakeTextRect( SdrOutliner& rOutliner, Rectangle& rTextRect, FASTBOOL bNoEditText, Rectangle* pAnchorRect, sal_Bool /*bLineWidth*/) const { Rectangle aAnkRect; // Rect innerhalb dem geankert wird TakeTextAnchorRect(aAnkRect); SdrTextVertAdjust eVAdj=GetTextVerticalAdjust(); SdrTextHorzAdjust eHAdj=GetTextHorizontalAdjust(); sal_uIntPtr nStat0=rOutliner.GetControlWord(); Size aNullSize; rOutliner.SetControlWord(nStat0|EE_CNTRL_AUTOPAGESIZE); rOutliner.SetMinAutoPaperSize(aNullSize); sal_Int32 nMaxAutoPaperWidth = 1000000; sal_Int32 nMaxAutoPaperHeight= 1000000; long nAnkWdt=aAnkRect.GetWidth(); long nAnkHgt=aAnkRect.GetHeight(); if (((SdrTextWordWrapItem&)(GetMergedItem(SDRATTR_TEXT_WORDWRAP))).GetValue()) { if ( IsVerticalWriting() ) nMaxAutoPaperHeight = nAnkHgt; else nMaxAutoPaperWidth = nAnkWdt; } if(SDRTEXTHORZADJUST_BLOCK == eHAdj && !IsVerticalWriting()) { rOutliner.SetMinAutoPaperSize(Size(nAnkWdt, 0)); } if(SDRTEXTVERTADJUST_BLOCK == eVAdj && IsVerticalWriting()) { rOutliner.SetMinAutoPaperSize(Size(0, nAnkHgt)); } rOutliner.SetMaxAutoPaperSize( Size( nMaxAutoPaperWidth, nMaxAutoPaperHeight ) ); rOutliner.SetPaperSize( aNullSize ); // Text in den Outliner stecken - ggf. den aus dem EditOutliner OutlinerParaObject* pPara= GetOutlinerParaObject(); if (pEdtOutl && !bNoEditText) pPara=pEdtOutl->CreateParaObject(); if (pPara) { sal_Bool bHitTest = sal_False; if( pModel ) bHitTest = &pModel->GetHitTestOutliner() == &rOutliner; const SdrTextObj* pTestObj = rOutliner.GetTextObj(); if( !pTestObj || !bHitTest || pTestObj != this || pTestObj->GetOutlinerParaObject() != GetOutlinerParaObject() ) { if( bHitTest ) rOutliner.SetTextObj( this ); rOutliner.SetUpdateMode(sal_True); rOutliner.SetText(*pPara); } } else { rOutliner.SetTextObj( NULL ); } if (pEdtOutl && !bNoEditText && pPara) delete pPara; rOutliner.SetUpdateMode(sal_True); rOutliner.SetControlWord(nStat0); SdrText* pText = getActiveText(); if( pText ) pText->CheckPortionInfo( rOutliner ); Point aTextPos(aAnkRect.TopLeft()); Size aTextSiz(rOutliner.GetPaperSize()); // GetPaperSize() hat etwas Toleranz drauf, oder? // #106653# // For draw objects containing text correct hor/ver alignment if text is bigger // than the object itself. Without that correction, the text would always be // formatted to the left edge (or top edge when vertical) of the draw object. if( !IsTextFrame() ) { if(aAnkRect.GetWidth() < aTextSiz.Width() && !IsVerticalWriting()) { // #110129# // Horizontal case here. Correct only if eHAdj == SDRTEXTHORZADJUST_BLOCK, // else the alignment is wanted. if(SDRTEXTHORZADJUST_BLOCK == eHAdj) { eHAdj = SDRTEXTHORZADJUST_CENTER; } } if(aAnkRect.GetHeight() < aTextSiz.Height() && IsVerticalWriting()) { // #110129# // Vertical case here. Correct only if eHAdj == SDRTEXTVERTADJUST_BLOCK, // else the alignment is wanted. if(SDRTEXTVERTADJUST_BLOCK == eVAdj) { eVAdj = SDRTEXTVERTADJUST_CENTER; } } } if (eHAdj==SDRTEXTHORZADJUST_CENTER || eHAdj==SDRTEXTHORZADJUST_RIGHT) { long nFreeWdt=aAnkRect.GetWidth()-aTextSiz.Width(); if (eHAdj==SDRTEXTHORZADJUST_CENTER) aTextPos.X()+=nFreeWdt/2; if (eHAdj==SDRTEXTHORZADJUST_RIGHT) aTextPos.X()+=nFreeWdt; } if (eVAdj==SDRTEXTVERTADJUST_CENTER || eVAdj==SDRTEXTVERTADJUST_BOTTOM) { long nFreeHgt=aAnkRect.GetHeight()-aTextSiz.Height(); if (eVAdj==SDRTEXTVERTADJUST_CENTER) aTextPos.Y()+=nFreeHgt/2; if (eVAdj==SDRTEXTVERTADJUST_BOTTOM) aTextPos.Y()+=nFreeHgt; } if (aGeo.nDrehWink!=0) RotatePoint(aTextPos,aAnkRect.TopLeft(),aGeo.nSin,aGeo.nCos); if (pAnchorRect) *pAnchorRect=aAnkRect; // rTextRect ist bei ContourFrame in einigen Faellen nicht korrekt rTextRect=Rectangle(aTextPos,aTextSiz); } void SdrObjCustomShape::NbcSetOutlinerParaObject(OutlinerParaObject* pTextObject) { SdrTextObj::NbcSetOutlinerParaObject( pTextObject ); SetBoundRectDirty(); SetRectsDirty(sal_True); InvalidateRenderGeometry(); } void SdrObjCustomShape::operator=(const SdrObject& rObj) { SdrTextObj::operator=( rObj ); aName =((SdrObjCustomShape&)rObj).aName; fObjectRotation = ((SdrObjCustomShape&)rObj).fObjectRotation; InvalidateRenderGeometry(); } void SdrObjCustomShape::TakeObjNameSingul(XubString& rName) const { rName = ImpGetResStr(STR_ObjNameSingulCUSTOMSHAPE); String aNm( GetName() ); if( aNm.Len() ) { rName += sal_Unicode(' '); rName += sal_Unicode('\''); rName += aNm; rName += sal_Unicode('\''); } } void SdrObjCustomShape::TakeObjNamePlural(XubString& rName) const { rName=ImpGetResStr(STR_ObjNamePluralCUSTOMSHAPE); } basegfx::B2DPolyPolygon SdrObjCustomShape::TakeXorPoly() const { return GetLineGeometry( (SdrObjCustomShape*)this, sal_False ); } basegfx::B2DPolyPolygon SdrObjCustomShape::TakeContour() const { const SdrObject* pSdrObject = GetSdrObjectFromCustomShape(); if ( pSdrObject ) return pSdrObject->TakeContour(); return basegfx::B2DPolyPolygon(); } SdrObject* SdrObjCustomShape::DoConvertToPolyObj(sal_Bool bBezier, bool bAddText) const { // #i37011# SdrObject* pRetval = 0L; SdrObject* pRenderedCustomShape = 0L; if ( !mXRenderedCustomShape.is() ) { // force CustomShape ((SdrObjCustomShape*)this)->GetSdrObjectFromCustomShape(); } if ( mXRenderedCustomShape.is() ) { pRenderedCustomShape = GetSdrObjectFromXShape( mXRenderedCustomShape ); } if ( pRenderedCustomShape ) { SdrObject* pCandidate = pRenderedCustomShape->Clone(); DBG_ASSERT(pCandidate, "SdrObjCustomShape::DoConvertToPolyObj: Could not clone SdrObject (!)"); pCandidate->SetModel(GetModel()); pRetval = pCandidate->DoConvertToPolyObj(bBezier, bAddText); SdrObject::Free( pCandidate ); if(pRetval) { const sal_Bool bShadow(((SdrShadowItem&)GetMergedItem(SDRATTR_SHADOW)).GetValue()); if(bShadow) { pRetval->SetMergedItem(SdrShadowItem(sal_True)); } } if(bAddText && HasText() && !IsTextPath()) { pRetval = ImpConvertAddText(pRetval, bBezier); } } return pRetval; } void SdrObjCustomShape::NbcSetStyleSheet( SfxStyleSheet* pNewStyleSheet, sal_Bool bDontRemoveHardAttr ) { // #i40944# InvalidateRenderGeometry(); SdrObject::NbcSetStyleSheet( pNewStyleSheet, bDontRemoveHardAttr ); } void SdrObjCustomShape::SetPage( SdrPage* pNewPage ) { SdrTextObj::SetPage( pNewPage ); if( pNewPage ) { // invalidating rectangles by SetRectsDirty is not sufficient, // AdjustTextFrameWidthAndHeight() also has to be made, both // actions are done by NbcSetSnapRect Rectangle aTmp( aRect ); //creating temporary rectangle #i61108# NbcSetSnapRect( aTmp ); } } SdrObjGeoData* SdrObjCustomShape::NewGeoData() const { return new SdrAShapeObjGeoData; } void SdrObjCustomShape::SaveGeoData(SdrObjGeoData& rGeo) const { SdrTextObj::SaveGeoData( rGeo ); SdrAShapeObjGeoData& rAGeo=(SdrAShapeObjGeoData&)rGeo; rAGeo.fObjectRotation = fObjectRotation; rAGeo.bMirroredX = IsMirroredX(); rAGeo.bMirroredY = IsMirroredY(); const rtl::OUString sAdjustmentValues( RTL_CONSTASCII_USTRINGPARAM ( "AdjustmentValues" ) ); Any* pAny( ( (SdrCustomShapeGeometryItem&)GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ) ).GetPropertyValueByName( sAdjustmentValues ) ); if ( pAny ) *pAny >>= rAGeo.aAdjustmentSeq; } void SdrObjCustomShape::RestGeoData(const SdrObjGeoData& rGeo) { SdrTextObj::RestGeoData( rGeo ); SdrAShapeObjGeoData& rAGeo=(SdrAShapeObjGeoData&)rGeo; fObjectRotation = rAGeo.fObjectRotation; SetMirroredX( rAGeo.bMirroredX ); SetMirroredY( rAGeo.bMirroredY ); SdrCustomShapeGeometryItem rGeometryItem = (SdrCustomShapeGeometryItem&)GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY ); const rtl::OUString sAdjustmentValues( RTL_CONSTASCII_USTRINGPARAM ( "AdjustmentValues" ) ); PropertyValue aPropVal; aPropVal.Name = sAdjustmentValues; aPropVal.Value <<= rAGeo.aAdjustmentSeq; rGeometryItem.SetPropertyValue( aPropVal ); SetMergedItem( rGeometryItem ); InvalidateRenderGeometry(); } void SdrObjCustomShape::TRSetBaseGeometry(const basegfx::B2DHomMatrix& rMatrix, const basegfx::B2DPolyPolygon& /*rPolyPolygon*/) { // break up matrix basegfx::B2DTuple aScale; basegfx::B2DTuple aTranslate; double fRotate, fShearX; rMatrix.decompose(aScale, aTranslate, fRotate, fShearX); // #i75086# Old DrawingLayer (GeoStat and geometry) does not support holding negative scalings // in X and Y which equal a 180 degree rotation. Recognize it and react accordingly const bool bMirrorX(basegfx::fTools::less(aScale.getX(), 0.0)); const bool bMirrorY(basegfx::fTools::less(aScale.getY(), 0.0)); if(bMirrorX && bMirrorY) { aScale.setX(fabs(aScale.getX())); aScale.setY(fabs(aScale.getY())); fRotate = fmod(fRotate + F_PI, F_2PI); } else if(bMirrorX || bMirrorY) { basegfx::B2DHomMatrix aNew; // create pre-multiplied matrix without mirroring aNew.translate(-0.5, -0.5); aNew.scale(bMirrorX ? -1.0 : 1.0, bMirrorY ? -1.0 : 1.0); aNew.translate(0.5, 0.5); aNew = rMatrix * aNew; // decompose to get corrected, mirror-free values aNew.decompose(aScale, aTranslate, fRotate, fShearX); // apply mirroring to CustomShapeGeometry if((bool)IsMirroredX() != bMirrorX) { SetMirroredX(bMirrorX); } if((bool)IsMirroredY() != bMirrorY) { SetMirroredY(bMirrorY); } } // reset object shear and rotations aGeo.nDrehWink = 0; aGeo.RecalcSinCos(); aGeo.nShearWink = 0; aGeo.RecalcTan(); // force metric to pool metric SfxMapUnit eMapUnit = GetObjectItemSet().GetPool()->GetMetric(0); if(eMapUnit != SFX_MAPUNIT_100TH_MM) { switch(eMapUnit) { case SFX_MAPUNIT_TWIP : { // position aTranslate.setX(ImplMMToTwips(aTranslate.getX())); aTranslate.setY(ImplMMToTwips(aTranslate.getY())); // size aScale.setX(ImplMMToTwips(aScale.getX())); aScale.setY(ImplMMToTwips(aScale.getY())); break; } default: { DBG_ERROR("TRSetBaseGeometry: Missing unit translation to PoolMetric!"); } } } // if anchor is used, make position relative to it if( pModel && pModel->IsWriter() ) { if(GetAnchorPos().X() || GetAnchorPos().Y()) { aTranslate += basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y()); } } // build and set BaseRect (use scale) Point aPoint = Point(); Size aSize(FRound(aScale.getX()), FRound(aScale.getY())); Rectangle aBaseRect(aPoint, aSize); SetSnapRect(aBaseRect); // shear? if(!basegfx::fTools::equalZero(fShearX)) { GeoStat aGeoStat; aGeoStat.nShearWink = FRound((atan(fShearX) / F_PI180) * 100.0); aGeoStat.RecalcTan(); Shear(Point(), aGeoStat.nShearWink, aGeoStat.nTan, sal_False); } // rotation? if(!basegfx::fTools::equalZero(fRotate)) { GeoStat aGeoStat; // #i78696# // fRotate is mathematically correct, but aGeoStat.nDrehWink is // mirrored -> mirror value here aGeoStat.nDrehWink = NormAngle360(FRound(-fRotate / F_PI18000)); aGeoStat.RecalcSinCos(); Rotate(Point(), aGeoStat.nDrehWink, aGeoStat.nSin, aGeoStat.nCos); } // translate? if(!aTranslate.equalZero()) { Move(Size(FRound(aTranslate.getX()), FRound(aTranslate.getY()))); } } // taking fObjectRotation instead of aGeo.nWink sal_Bool SdrObjCustomShape::TRGetBaseGeometry(basegfx::B2DHomMatrix& rMatrix, basegfx::B2DPolyPolygon& /*rPolyPolygon*/) const { // get turn and shear // double fRotate = (aGeo.nDrehWink / 100.0) * F_PI180; double fRotate = fObjectRotation * F_PI180; double fShearX = (aGeo.nShearWink / 100.0) * F_PI180; // get aRect, this is the unrotated snaprect Rectangle aRectangle(aRect); sal_Bool bMirroredX = IsMirroredX(); sal_Bool bMirroredY = IsMirroredY(); if ( bMirroredX || bMirroredY ) { // we have to retrieve the unmirrored rect GeoStat aNewGeo( aGeo ); if ( bMirroredX ) { Polygon aPol( Rect2Poly( aRect, aNewGeo ) ); Rectangle aBoundRect( aPol.GetBoundRect() ); Point aRef1( ( aBoundRect.Left() + aBoundRect.Right() ) >> 1, aBoundRect.Top() ); Point aRef2( aRef1.X(), aRef1.Y() + 1000 ); sal_uInt16 i; sal_uInt16 nPntAnz=aPol.GetSize(); for (i=0; i> 1 ); Point aRef2( aRef1.X() + 1000, aRef1.Y() ); sal_uInt16 i; sal_uInt16 nPntAnz=aPol.GetSize(); for (i=0; iIsWriter() ) { if(GetAnchorPos().X() || GetAnchorPos().Y()) { aTranslate -= basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y()); } } // force MapUnit to 100th mm SfxMapUnit eMapUnit = GetObjectItemSet().GetPool()->GetMetric(0); if(eMapUnit != SFX_MAPUNIT_100TH_MM) { switch(eMapUnit) { case SFX_MAPUNIT_TWIP : { // postion aTranslate.setX(ImplTwipsToMM(aTranslate.getX())); aTranslate.setY(ImplTwipsToMM(aTranslate.getY())); // size aScale.setX(ImplTwipsToMM(aScale.getX())); aScale.setY(ImplTwipsToMM(aScale.getY())); break; } default: { DBG_ERROR("TRGetBaseGeometry: Missing unit translation to 100th mm!"); } } } // build matrix rMatrix = basegfx::tools::createScaleShearXRotateTranslateB2DHomMatrix( aScale, basegfx::fTools::equalZero(fShearX) ? 0.0 : tan(fShearX), basegfx::fTools::equalZero(fRotate) ? 0.0 : -fRotate, aTranslate); return sal_False; } sdr::contact::ViewContact* SdrObjCustomShape::CreateObjectSpecificViewContact() { return new sdr::contact::ViewContactOfSdrObjCustomShape(*this); } // #i33136# bool SdrObjCustomShape::doConstructOrthogonal(const ::rtl::OUString& rName) { bool bRetval(false); static ::rtl::OUString Imps_sNameASOrtho_quadrat( RTL_CONSTASCII_USTRINGPARAM( "quadrat" ) ); static ::rtl::OUString Imps_sNameASOrtho_round_quadrat( RTL_CONSTASCII_USTRINGPARAM( "round-quadrat" ) ); static ::rtl::OUString Imps_sNameASOrtho_circle( RTL_CONSTASCII_USTRINGPARAM( "circle" ) ); static ::rtl::OUString Imps_sNameASOrtho_circle_pie( RTL_CONSTASCII_USTRINGPARAM( "circle-pie" ) ); static ::rtl::OUString Imps_sNameASOrtho_ring( RTL_CONSTASCII_USTRINGPARAM( "ring" ) ); if(Imps_sNameASOrtho_quadrat.equalsIgnoreAsciiCase(rName)) { bRetval = true; } else if(Imps_sNameASOrtho_round_quadrat.equalsIgnoreAsciiCase(rName)) { bRetval = true; } else if(Imps_sNameASOrtho_circle.equalsIgnoreAsciiCase(rName)) { bRetval = true; } else if(Imps_sNameASOrtho_circle_pie.equalsIgnoreAsciiCase(rName)) { bRetval = true; } else if(Imps_sNameASOrtho_ring.equalsIgnoreAsciiCase(rName)) { bRetval = true; } return bRetval; } // #i37011# centralize throw-away of render geometry void SdrObjCustomShape::InvalidateRenderGeometry() { mXRenderedCustomShape = 0L; SdrObject::Free( mpLastShadowGeometry ); mpLastShadowGeometry = 0L; } // eof