/************************************************************** * * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. * *************************************************************/ // MARKER(update_precomp.py): autogen include statement, do not remove #include "precompiled_sw.hxx" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include // Strukturen zum Sichern beim Move/Delete #include #include #include #include #include #include #include #include // --> OD 2006-03-06 #125892# #include // <-- #include // --> 3.7.2010 #i972# #include // <-- // --> OD 2009-12-29 #i89920# #include #include // <-- using ::rtl::OUString; using namespace ::com::sun::star; //Zum anmelden von Flys in Flys in ... //definiert in layout/frmtool.cxx void RegistFlys( SwPageFrm*, const SwLayoutFrm* ); /*********************************************************************** #* Class : SwDoc #* Methode : UseSpzLayoutFmt #* Beschreibung: Anhand des Request werden zu dem Format entsprechende #* Aenderungen an den Spezifischen Layouts vorgenommen. #* Datum : MA 23. Sep. 92 #* Update : JP 09.03.98 #***********************************************************************/ sal_Bool lcl_SetNewFlyPos( const SwNode& rNode, SwFmtAnchor& rAnchor, const Point& rPt ) { sal_Bool bRet = sal_False; const SwStartNode* pStNode = rNode.FindFlyStartNode(); if( pStNode ) { SwPosition aPos( *pStNode ); rAnchor.SetAnchor( &aPos ); bRet = sal_True; } else { const SwCntntNode *pCntNd = rNode.GetCntntNode(); const SwCntntFrm* pCFrm = pCntNd ? pCntNd->getLayoutFrm( pCntNd->GetDoc()->GetCurrentLayout(), &rPt, 0, sal_False ) : 0; const SwPageFrm *pPg = pCFrm ? pCFrm->FindPageFrm() : 0; rAnchor.SetPageNum( pPg ? pPg->GetPhyPageNum() : 1 ); rAnchor.SetType( FLY_AT_PAGE ); } return bRet; } sal_Bool lcl_FindAnchorPos( SwEditShell& rEditShell, SwDoc& rDoc, const Point& rPt, const SwFrm& rFrm, SfxItemSet& rSet ) { sal_Bool bRet = sal_True; SwFmtAnchor aNewAnch( (SwFmtAnchor&)rSet.Get( RES_ANCHOR ) ); RndStdIds nNew = aNewAnch.GetAnchorId(); const SwFrm *pNewAnch; //Neuen Anker ermitteln Point aTmpPnt( rPt ); switch( nNew ) { case FLY_AS_CHAR: // sollte der nicht auch mit hinein? case FLY_AT_PARA: case FLY_AT_CHAR: // LAYER_IMPL { //Ausgehend von der linken oberen Ecke des Fly den //dichtesten CntntFrm suchen. const SwFrm* pFrm = rFrm.IsFlyFrm() ? ((SwFlyFrm&)rFrm).GetAnchorFrm() : &rFrm; pNewAnch = ::FindAnchor( pFrm, aTmpPnt ); if( pNewAnch->IsProtected() ) { bRet = sal_False; break; } SwPosition aPos( *((SwCntntFrm*)pNewAnch)->GetNode() ); if ((FLY_AT_CHAR == nNew) || (FLY_AS_CHAR == nNew)) { // es muss ein TextNode gefunden werden, denn nur in diesen // ist ein Inhaltsgebundene Frames zu verankern SwCrsrMoveState aState( MV_SETONLYTEXT ); aTmpPnt.X() -= 1; //nicht im Fly landen!! if( !pNewAnch->GetCrsrOfst( &aPos, aTmpPnt, &aState ) ) { SwCntntNode* pCNd = ((SwCntntFrm*)pNewAnch)->GetNode(); if( pNewAnch->Frm().Bottom() < aTmpPnt.Y() ) pCNd->MakeStartIndex( &aPos.nContent ); else pCNd->MakeEndIndex( &aPos.nContent ); } else { if ( rEditShell.PosInsideInputFld( aPos ) ) { aPos.nContent = rEditShell.StartOfInputFldAtPos( aPos ); } } } aNewAnch.SetAnchor( &aPos ); } break; case FLY_AT_FLY: // LAYER_IMPL { //Ausgehend von der linken oberen Ecke des Fly den //dichtesten SwFlyFrm suchen. SwCrsrMoveState aState( MV_SETONLYTEXT ); SwPosition aPos( rDoc.GetNodes() ); aTmpPnt.X() -= 1; //nicht im Fly landen!! rDoc.GetCurrentLayout()->GetCrsrOfst( &aPos, aTmpPnt, &aState ); //swmod 071108//swmod 071225 pNewAnch = ::FindAnchor( aPos.nNode.GetNode().GetCntntNode()->getLayoutFrm( rFrm.getRootFrm(), 0, 0, sal_False ), aTmpPnt )->FindFlyFrm(); if( pNewAnch && &rFrm != pNewAnch && !pNewAnch->IsProtected() ) { aPos.nNode = *((SwFlyFrm*)pNewAnch)->GetFmt()->GetCntnt(). GetCntntIdx(); aNewAnch.SetAnchor( &aPos ); break; } } aNewAnch.SetType( nNew = FLY_AT_PAGE ); // no break case FLY_AT_PAGE: pNewAnch = rFrm.FindPageFrm(); aNewAnch.SetPageNum( pNewAnch->GetPhyPageNum() ); break; default: ASSERT( !&rDoc, "Falsche ID fuer neuen Anker." ); } rSet.Put( aNewAnch ); return bRet; } // //! also used in unoframe.cxx // sal_Bool lcl_ChkAndSetNewAnchor( SwEditShell& rEditShell, const SwFlyFrm& rFly, SfxItemSet& rSet ) { const SwFrmFmt& rFmt = *rFly.GetFmt(); const SwFmtAnchor &rOldAnch = rFmt.GetAnchor(); const RndStdIds nOld = rOldAnch.GetAnchorId(); RndStdIds nNew = ((SwFmtAnchor&)rSet.Get( RES_ANCHOR )).GetAnchorId(); if( nOld == nNew ) return sal_False; SwDoc* pDoc = (SwDoc*)rFmt.GetDoc(); #ifdef DBG_UTIL ASSERT( !(nNew == FLY_AT_PAGE && (FLY_AT_PARA==nOld || FLY_AT_CHAR==nOld || FLY_AS_CHAR==nOld ) && pDoc->IsInHeaderFooter( rOldAnch.GetCntntAnchor()->nNode )), "Unerlaubter Ankerwechsel in Head/Foot." ); #endif return ::lcl_FindAnchorPos( rEditShell, *pDoc, rFly.Frm().Pos(), rFly, rSet ); } void SwFEShell::SelectFlyFrm( SwFlyFrm& rFrm, sal_Bool bNew ) { SET_CURR_SHELL( this ); // Wenn es ein neuer Rahmen ist, so soll er selektiert sein. // !!Rahmen immer selektieren, wenn sie nicht selektiert sind. // - Es kann ein neuer 'alter' sein weil der Anker gewechselt wurde. // - 'alte' Rahmen sind vorher immer selektiert denn sonst wird nix // an ihnen veraendert. // Der Rahmen darf nicht per Dokumentposition selektiert werden, weil er // auf jedenfall selektiert sein muss! SwViewImp *pImpl = Imp(); if( GetWin() && (bNew || !pImpl->GetDrawView()->AreObjectsMarked()) ) { ASSERT( rFrm.IsFlyFrm(), "SelectFlyFrm will einen Fly" ); //Wenn der Fly bereits selektiert ist gibt es hier ja wohl nichts //zu tun. if ( FindFlyFrm() == &rFrm ) return; //Damit der Anker ueberhaupt noch gepaintet wird. if( rFrm.IsFlyInCntFrm() && rFrm.GetAnchorFrm() ) rFrm.GetAnchorFrm()->SetCompletePaint(); // --> OD 2004-06-11 #i28701# - no format at all. // //Hier wurde immer kalkuliert. Leider ist der Sonderfall Fly in Fly mit // //Spalten u.U. sehr kritisch wenn der innenliegende zuerst formatiert // //wird. Um kein Risiko einzugehen entschaerfen wir nur diesen Sonderfall. // if( !rFrm.GetAnchorFrm()->IsInFly() ) // rFrm.Calc(); if( pImpl->GetDrawView()->AreObjectsMarked() ) pImpl->GetDrawView()->UnmarkAll(); pImpl->GetDrawView()->MarkObj( rFrm.GetVirtDrawObj(), pImpl->GetPageView(), sal_False, sal_False ); KillPams(); ClearMark(); SelFlyGrabCrsr(); } } /************************************************************************* |* |* SwFEShell::FindFlyFrm() |* |* Beschreibung Liefert den Fly wenn einer Selektiert ist. |* Ersterstellung MA 03. Nov. 92 |* Letzte Aenderung MA 05. Mar. 96 |* *************************************************************************/ SwFlyFrm *SwFEShell::FindFlyFrm() const { if ( Imp()->HasDrawView() ) { // Ein Fly ist genau dann erreichbar, wenn er selektiert ist. const SdrMarkList &rMrkList = Imp()->GetDrawView()->GetMarkedObjectList(); if( rMrkList.GetMarkCount() != 1 ) return 0; SdrObject *pO = rMrkList.GetMark( 0 )->GetMarkedSdrObj(); return ( pO && pO->ISA(SwVirtFlyDrawObj) ) ? ((SwVirtFlyDrawObj*)pO)->GetFlyFrm() : 0; } return 0; } /************************************************************************* |* |* SwFEShell::IsFlyInFly() |* |* Beschreibung Liefert sal_True, wenn der aktuelle Fly an einem anderen |* verankert werden koennte (also innerhalb ist) |* Ersterstellung AMA 11. Sep. 97 |* Letzte Aenderung AMA 14. Jan. 98 |* *************************************************************************/ const SwFrmFmt* SwFEShell::IsFlyInFly() { SET_CURR_SHELL( this ); if ( !Imp()->HasDrawView() ) return NULL; const SdrMarkList &rMrkList = Imp()->GetDrawView()->GetMarkedObjectList(); if ( !rMrkList.GetMarkCount() ) { SwCntntFrm *pCntnt = GetCurrFrm( sal_False ); if( !pCntnt ) return NULL; SwFlyFrm *pFly = pCntnt->FindFlyFrm(); if ( !pFly ) return NULL; return pFly->GetFmt(); } else if ( rMrkList.GetMarkCount() != 1 || !GetUserCall(rMrkList.GetMark( 0 )->GetMarkedSdrObj()) ) return NULL; SdrObject *pObj = rMrkList.GetMark( 0 )->GetMarkedSdrObj(); SwFrmFmt *pFmt = FindFrmFmt( pObj ); if( pFmt && FLY_AT_FLY == pFmt->GetAnchor().GetAnchorId() ) { const SwFrm* pFly = pObj->ISA(SwVirtFlyDrawObj) ? ((SwVirtFlyDrawObj*)pObj)->GetFlyFrm()->GetAnchorFrm() : ((SwDrawContact*)GetUserCall(pObj))->GetAnchorFrm( pObj ); ASSERT( pFly, "IsFlyInFly: Where's my anchor?" ); ASSERT( pFly->IsFlyFrm(), "IsFlyInFly: Funny anchor!" ); return ((SwFlyFrm*)pFly)->GetFmt(); } Point aTmpPos = pObj->GetCurrentBoundRect().TopLeft(); SwFrm *pTxtFrm; { SwCrsrMoveState aState( MV_SETONLYTEXT ); SwNodeIndex aSwNodeIndex( GetDoc()->GetNodes() ); SwPosition aPos( aSwNodeIndex ); Point aPoint( aTmpPos ); aPoint.X() -= 1; //nicht im Fly landen!! GetLayout()->GetCrsrOfst( &aPos, aPoint, &aState ); // OD 01.07.2003 #108784# - determine text frame by left-top-corner // of object //pTxtFrm = aPos.nNode.GetNode().GetCntntNode()->GetFrm( 0, 0, sal_False ); pTxtFrm = aPos.nNode.GetNode().GetCntntNode()->getLayoutFrm( GetLayout(), &aTmpPos, 0, sal_False ); } const SwFrm *pTmp = ::FindAnchor( pTxtFrm, aTmpPos ); const SwFlyFrm *pFly = pTmp->FindFlyFrm(); if( pFly ) return pFly->GetFmt(); return NULL; } /************************************************************************* |* |* SwFEShell::SetFlyPos |* |* Ersterstellung MA 14. Jan. 93 |* Letzte Aenderung MA 14. Feb. 95 |* *************************************************************************/ void SwFEShell::SetFlyPos( const Point& rAbsPos ) { SET_CURR_SHELL( this ); //Bezugspunkt in Dokumentkoordinaten bestimmen SwCntntFrm *pCntnt = GetCurrFrm( sal_False ); if( !pCntnt ) return; SwFlyFrm *pFly = pCntnt->FindFlyFrm(); if ( !pFly ) return; //SwSaveHdl aSaveX( Imp() ); //Bei Absatzgebundenen Flys muss ausgehend von der absoluten //Position ein neuer Anker gesetzt werden. Anker und neue RelPos werden //vom Fly selbst berechnet und gesetzt. if ( pFly->IsFlyAtCntFrm() ) ((SwFlyAtCntFrm*)pFly)->SetAbsPos( rAbsPos ); else { const SwFrm *pAnch = pFly->GetAnchorFrm(); // --> OD 2004-06-11 #i28701# - no format here // pAnch->Calc(); Point aOrient( pAnch->Frm().Pos() ); if ( pFly->IsFlyInCntFrm() ) aOrient.X() = rAbsPos.X(); //RelPos errechnen. aOrient.X() = rAbsPos.X() - aOrient.X(); aOrient.Y() = rAbsPos.Y() - aOrient.Y(); pFly->ChgRelPos( aOrient ); } // --> OD 2004-06-11 #i28701# - no format here // pFly->Calc(); CallChgLnk(); // rufe das AttrChangeNotify auf der UI-Seite. } /************************************************************************* |* |* SwFEShell::FindAnchorPos |* |* Ersterstellung AMA 24. Sep. 97 |* Letzte Aenderung AMA 24. Sep. 97 |* *************************************************************************/ Point SwFEShell::FindAnchorPos( const Point& rAbsPos, sal_Bool bMoveIt ) { Point aRet; SET_CURR_SHELL( this ); if ( !Imp()->HasDrawView() ) return aRet; const SdrMarkList &rMrkList = Imp()->GetDrawView()->GetMarkedObjectList(); if ( rMrkList.GetMarkCount() != 1 || !GetUserCall(rMrkList.GetMark( 0 )->GetMarkedSdrObj()) ) return aRet; SdrObject* pObj = rMrkList.GetMark( 0 )->GetMarkedSdrObj(); // --> OD 2004-07-16 #i28701# SwAnchoredObject* pAnchoredObj = ::GetUserCall( pObj )->GetAnchoredObj( pObj ); SwFrmFmt& rFmt = pAnchoredObj->GetFrmFmt(); const RndStdIds nAnchorId = rFmt.GetAnchor().GetAnchorId(); if ( FLY_AS_CHAR == nAnchorId ) return aRet; sal_Bool bFlyFrame = pObj->ISA(SwVirtFlyDrawObj); SwFlyFrm* pFly = 0L; const SwFrm* pOldAnch; const SwFrm* pFooterOrHeader = NULL; if( bFlyFrame ) { //Bezugspunkt in Dokumentkoordinaten bestimmen SwCntntFrm *pCntnt = GetCurrFrm( sal_False ); if( !pCntnt ) return aRet; pFly = pCntnt->FindFlyFrm(); if ( !pFly ) return aRet; pOldAnch = pFly->GetAnchorFrm(); if( !pOldAnch ) return aRet; if ( FLY_AT_PAGE != nAnchorId ) { pFooterOrHeader = pCntnt->FindFooterOrHeader(); } } // OD 26.06.2003 #108784# - set also for drawing // objects, but not for control objects. // Necessary for moving 'anchor symbol' at the user interface inside header/footer. else if ( !::CheckControlLayer( pObj ) ) { SwCntntFrm *pCntnt = GetCurrFrm( sal_False ); if( !pCntnt ) return aRet; pFooterOrHeader = pCntnt->FindFooterOrHeader(); } SwCntntFrm *pTxtFrm = NULL; { SwCrsrMoveState aState( MV_SETONLYTEXT ); SwPosition aPos( GetDoc()->GetNodes().GetEndOfExtras() ); Point aTmpPnt( rAbsPos ); GetLayout()->GetCrsrOfst( &aPos, aTmpPnt, &aState ); if ( nAnchorId != FLY_AT_CHAR || !PosInsideInputFld( aPos ) ) { pTxtFrm = aPos.nNode.GetNode().GetCntntNode()->getLayoutFrm( GetLayout(),0,&aPos,sal_False ); } } const SwFrm *pNewAnch = NULL; if( pTxtFrm != NULL ) { if ( FLY_AT_PAGE == nAnchorId ) { pNewAnch = pTxtFrm->FindPageFrm(); } else { pNewAnch = ::FindAnchor( pTxtFrm, rAbsPos ); if( FLY_AT_FLY == nAnchorId ) // LAYER_IMPL { pNewAnch = pNewAnch->FindFlyFrm(); } } } if( pNewAnch && !pNewAnch->IsProtected() ) { const SwFlyFrm* pCheck = bFlyFrame ? pNewAnch->FindFlyFrm() : 0; // Falls wir innerhalb eines Rahmens landen, muss sichergestellt werden, // dass der Rahmen nicht in seinem eigenen Inhalt landet! while( pCheck ) { if( pCheck == pFly ) break; const SwFrm *pTmp = pCheck->GetAnchorFrm(); pCheck = pTmp ? pTmp->FindFlyFrm() : NULL; } // Es darf nicht aus einer Kopf-/Fusszeile in einen anderen Bereich // gewechselt werden, es darf nicht in eine Kopf-/Fusszeile hinein- // gewechselt werden. if( !pCheck && pFooterOrHeader == pNewAnch->FindFooterOrHeader() ) { aRet = pNewAnch->GetFrmAnchorPos( ::HasWrap( pObj ) ); if ( bMoveIt || (nAnchorId == FLY_AT_CHAR) ) { SwFmtAnchor aAnch( rFmt.GetAnchor() ); switch ( nAnchorId ) { case FLY_AT_PARA: { SwPosition *pPos = (SwPosition*)aAnch.GetCntntAnchor(); pPos->nNode = *pTxtFrm->GetNode(); pPos->nContent.Assign(0,0); break; } case FLY_AT_PAGE: { aAnch.SetPageNum( ((const SwPageFrm*)pNewAnch)-> GetPhyPageNum() ); break; } case FLY_AT_FLY: { SwPosition aPos( *((SwFlyFrm*)pNewAnch)->GetFmt()-> GetCntnt().GetCntntIdx() ); aAnch.SetAnchor( &aPos ); break; } case FLY_AT_CHAR: { SwPosition *pPos = (SwPosition*)aAnch.GetCntntAnchor(); Point aTmpPnt( rAbsPos ); if( pTxtFrm->GetCrsrOfst( pPos, aTmpPnt, NULL ) ) { SwRect aTmpRect; pTxtFrm->GetCharRect( aTmpRect, *pPos ); aRet = aTmpRect.Pos(); } else { pPos->nNode = *pTxtFrm->GetNode(); pPos->nContent.Assign(0,0); } break; } default: break; } if( bMoveIt ) { StartAllAction(); // --> OD 2006-02-28 #125892# // handle change of anchor node: // if count of the anchor frame also change, the fly frames have to be // re-created. Thus, delete all fly frames except the before the // anchor attribute is change and re-create them afterwards. { SwHandleAnchorNodeChg* pHandleAnchorNodeChg( 0L ); SwFlyFrmFmt* pFlyFrmFmt( dynamic_cast(&rFmt) ); if ( pFlyFrmFmt ) { pHandleAnchorNodeChg = new SwHandleAnchorNodeChg( *pFlyFrmFmt, aAnch ); } rFmt.GetDoc()->SetAttr( aAnch, rFmt ); delete pHandleAnchorNodeChg; } // <-- // --> OD 2004-06-24 #i28701# - no call of method // for to-character anchored // Writer fly frame needed. This method call can cause a // format of the anchor frame, which is no longer intended. // Instead clear the anchor character rectangle and // the top of line values for all to-character anchored objects. pAnchoredObj->ClearCharRectAndTopOfLine(); // <-- EndAllAction(); } } SwRect aTmpRect( aRet, rAbsPos ); if( aTmpRect.HasArea() ) MakeVisible( aTmpRect ); #ifdef DBG_UTIL //TODO: That doesn't seem to be intended if( Color(COL_TRANSPARENT) != GetOut()->GetLineColor() ) { ASSERT( sal_False, "Hey, Joe: Where's my Null Pen?" ); GetOut()->SetLineColor( Color(COL_TRANSPARENT) ); } #endif } } return aRet; } /*********************************************************************** #* Class : SwFEShell #* Methode : NewFlyFrm #* Beschreibung: #* Datum : MA 03. Nov. 92 #* Update : JP 11. Aug. 93 #***********************************************************************/ const SwFrmFmt *SwFEShell::NewFlyFrm( const SfxItemSet& rSet, sal_Bool bAnchValid, SwFrmFmt *pParent ) { SET_CURR_SHELL( this ); StartAllAction(); SwPaM* pCrsr = GetCrsr(); const Point aPt( GetCrsrDocPos() ); SwSelBoxes aBoxes; sal_Bool bMoveCntnt = sal_True; if( IsTableMode() ) { GetTblSel( *this, aBoxes ); if( aBoxes.Count() ) { // die Crsr muessen noch aus dem Loeschbereich entfernt // werden. Setze sie immer hinter/auf die Tabelle; ueber die // Dokument-Position werden sie dann immer an die alte // Position gesetzt. ParkCrsr( SwNodeIndex( *aBoxes[0]->GetSttNd() )); // --> FME 2005-12-01 #i127787# pCurCrsr will be deleted in ParkCrsr, // we better get the current pCurCrsr instead of working with the // deleted one: pCrsr = GetCrsr(); // <-- // KillPams(); } else bMoveCntnt = sal_False; } else if( !pCrsr->HasMark() && pCrsr->GetNext() == pCrsr ) bMoveCntnt = sal_False; const SwPosition& rPos = *pCrsr->Start(); SwFmtAnchor& rAnch = (SwFmtAnchor&)rSet.Get( RES_ANCHOR ); RndStdIds eRndId = rAnch.GetAnchorId(); switch( eRndId ) { case FLY_AT_PAGE: if( !rAnch.GetPageNum() ) //HotFix: Bug in UpdateByExample rAnch.SetPageNum( 1 ); break; case FLY_AT_FLY: case FLY_AT_PARA: case FLY_AT_CHAR: case FLY_AS_CHAR: if( !bAnchValid ) { if( FLY_AT_FLY != eRndId ) { rAnch.SetAnchor( &rPos ); } else if( lcl_SetNewFlyPos( rPos.nNode.GetNode(), rAnch, aPt ) ) { eRndId = FLY_AT_PAGE; } } break; default: ASSERT( sal_False, "What should that be for a Fly?" ) break; } SwFlyFrmFmt *pRet; if( bMoveCntnt ) { GetDoc()->GetIDocumentUndoRedo().StartUndo( UNDO_INSLAYFMT, NULL ); SwFmtAnchor* pOldAnchor = 0; sal_Bool bHOriChgd = sal_False, bVOriChgd = sal_False; SwFmtVertOrient aOldV; SwFmtHoriOrient aOldH; if ( FLY_AT_PAGE != eRndId ) { // erstmal als mit Seitenbindung, Absatz/Zeichenbindung erst wenn // alles verschoben ist. Dann ist die Position gueltig! // JP 13.05.98: ggfs. auch noch die Hori/Vert-Orientierung // umsetzen, damit diese beim Umanker NICHT // korrigiert wird pOldAnchor = new SwFmtAnchor( rAnch ); const_cast(rSet).Put( SwFmtAnchor( FLY_AT_PAGE, 1 ) ); const SfxPoolItem* pItem; if( SFX_ITEM_SET == rSet.GetItemState( RES_HORI_ORIENT, sal_False, &pItem ) && text::HoriOrientation::NONE == ((SwFmtHoriOrient*)pItem)->GetHoriOrient() ) { bHOriChgd = sal_True; aOldH = *((SwFmtHoriOrient*)pItem); ((SfxItemSet&)rSet).Put( SwFmtHoriOrient( 0, text::HoriOrientation::LEFT ) ); } if( SFX_ITEM_SET == rSet.GetItemState( RES_VERT_ORIENT, sal_False, &pItem ) && text::VertOrientation::NONE == ((SwFmtVertOrient*)pItem)->GetVertOrient() ) { bVOriChgd = sal_True; aOldV = *((SwFmtVertOrient*)pItem); ((SfxItemSet&)rSet).Put( SwFmtVertOrient( 0, text::VertOrientation::TOP ) ); } } pRet = GetDoc()->MakeFlyAndMove( *pCrsr, rSet, &aBoxes, pParent ); KillPams(); if( pOldAnchor ) { if( pRet ) { // neue Position bestimmen //JP 24.03.97: immer ueber die Seitenbindung gehen - der // chaos::Anchor darf nie im verschobenen Bereich // liegen pRet->DelFrms(); const SwFrm* pAnch = ::FindAnchor( GetLayout(), aPt, sal_False ); SwPosition aPos( *((SwCntntFrm*)pAnch)->GetNode() ); if ( FLY_AS_CHAR == eRndId ) { aPos.nContent.Assign( ((SwCntntFrm*)pAnch)->GetNode(), 0 ); } pOldAnchor->SetAnchor( &aPos ); // das verschieben von TabelleSelektion ist noch nicht // Undofaehig - also darf das UmAnkern auch nicht // aufgezeichnet werden. bool const bDoesUndo = GetDoc()->GetIDocumentUndoRedo().DoesUndo(); SwUndoId nLastUndoId(UNDO_EMPTY); if (bDoesUndo && GetDoc()->GetIDocumentUndoRedo().GetLastUndoInfo(0, & nLastUndoId)) { if (UNDO_INSLAYFMT == nLastUndoId) { GetDoc()->GetIDocumentUndoRedo().DoUndo(false); } } ((SfxItemSet&)rSet).Put( *pOldAnchor ); if( bHOriChgd ) ((SfxItemSet&)rSet).Put( aOldH ); if( bVOriChgd ) ((SfxItemSet&)rSet).Put( aOldV ); GetDoc()->SetFlyFrmAttr( *pRet, (SfxItemSet&)rSet ); GetDoc()->GetIDocumentUndoRedo().DoUndo(bDoesUndo); } delete pOldAnchor; } GetDoc()->GetIDocumentUndoRedo().EndUndo( UNDO_INSLAYFMT, NULL ); } else /* #109161# If called from a shell try to propagate an existing adjust item from rPos to the content node of the new frame. */ pRet = GetDoc()->MakeFlySection( eRndId, &rPos, &rSet, pParent, sal_True ); if( pRet ) { SwFlyFrm* pFrm = pRet->GetFrm( &aPt ); if( pFrm ) SelectFlyFrm( *pFrm, sal_True ); else { GetLayout()->SetAssertFlyPages(); pRet = 0; } } EndAllActionAndCall(); return pRet; } /*********************************************************************** #* Class : SwFEShell #* Methode : Insert #* Datum : ?? #* Update : MA 12. Sep. 94 #***********************************************************************/ void SwFEShell::Insert( const String& rGrfName, const String& rFltName, const Graphic* pGraphic, const SfxItemSet* pFlyAttrSet, const SfxItemSet* pGrfAttrSet, SwFrmFmt* pFrmFmt ) { SwFlyFrmFmt* pFmt = 0; SET_CURR_SHELL( this ); StartAllAction(); SwShellCrsr *pStartCursor = dynamic_cast(this->GetSwCrsr()); SwShellCrsr *pCursor = pStartCursor; do { // Anker noch nicht oder unvollstaendig gesetzt ? if( pFlyAttrSet ) { const SfxPoolItem* pItem; if( SFX_ITEM_SET == pFlyAttrSet->GetItemState( RES_ANCHOR, sal_False, &pItem ) ) { SwFmtAnchor* pAnchor = (SwFmtAnchor*)pItem; switch( pAnchor->GetAnchorId()) { case FLY_AT_PARA: case FLY_AT_CHAR: // LAYER_IMPL case FLY_AS_CHAR: if( !pAnchor->GetCntntAnchor() ) { pAnchor->SetAnchor( pCursor->GetPoint() ); } break; case FLY_AT_FLY: if( !pAnchor->GetCntntAnchor() ) { lcl_SetNewFlyPos( *pCursor->GetNode(), *pAnchor, GetCrsrDocPos() ); } break; case FLY_AT_PAGE: if( !pAnchor->GetPageNum() ) { pAnchor->SetPageNum( pCursor->GetPageNum( sal_True, &pCursor->GetPtPos() ) ); } break; default : break; } } } pFmt = GetDoc()->Insert(*pCursor, rGrfName, rFltName, pGraphic, pFlyAttrSet, pGrfAttrSet, pFrmFmt ); ASSERT( pFmt, "Doc->Insert(notxt) failed." ); } while( (pCursor = dynamic_cast(pCursor->GetNext())) != pStartCursor ); EndAllAction(); if( pFmt ) { const Point aPt( GetCrsrDocPos() ); SwFlyFrm* pFrm = pFmt->GetFrm( &aPt ); if( pFrm ) SelectFlyFrm( *pFrm, sal_True ); else GetLayout()->SetAssertFlyPages(); } } SwFlyFrmFmt* SwFEShell::InsertObject( const svt::EmbeddedObjectRef& xObj, const SfxItemSet* pFlyAttrSet, const SfxItemSet* pGrfAttrSet, SwFrmFmt* pFrmFmt ) { SwFlyFrmFmt* pFmt = 0; SET_CURR_SHELL( this ); StartAllAction(); FOREACHPAM_START( this ) pFmt = GetDoc()->Insert(*PCURCRSR, xObj, pFlyAttrSet, pGrfAttrSet, pFrmFmt ); ASSERT( pFmt, "Doc->Insert(notxt) failed." ); FOREACHPAM_END() EndAllAction(); if( pFmt ) { const Point aPt( GetCrsrDocPos() ); SwFlyFrm* pFrm = pFmt->GetFrm( &aPt ); if( pFrm ) SelectFlyFrm( *pFrm, sal_True ); else GetLayout()->SetAssertFlyPages(); } return pFmt; } void SwFEShell::InsertDrawObj( SdrObject& rDrawObj, const Point& rInsertPosition ) { SET_CURR_SHELL( this ); SfxItemSet rFlyAttrSet( GetDoc()->GetAttrPool(), aFrmFmtSetRange ); rFlyAttrSet.Put( SwFmtAnchor( FLY_AT_PARA )); // --> OD 2009-12-29 #i89920# rFlyAttrSet.Put( SwFmtSurround( SURROUND_THROUGHT ) ); rDrawObj.SetLayer( getIDocumentDrawModelAccess()->GetHeavenId() ); // <-- // find anchor position SwPaM aPam( pDoc->GetNodes() ); { SwCrsrMoveState aState( MV_SETONLYTEXT ); Point aTmpPt( rInsertPosition ); GetLayout()->GetCrsrOfst( aPam.GetPoint(), aTmpPt, &aState ); const SwFrm* pFrm = aPam.GetCntntNode()->getLayoutFrm( GetLayout(), 0, 0, sal_False ); const Point aRelPos( rInsertPosition.X() - pFrm->Frm().Left(), rInsertPosition.Y() - pFrm->Frm().Top() ); rDrawObj.SetRelativePos( aRelPos ); ::lcl_FindAnchorPos( *this, *GetDoc(), rInsertPosition, *pFrm, rFlyAttrSet ); } // insert drawing object into the document creating a new instance SwDrawFrmFmt* pFmt = GetDoc()->InsertDrawObj( aPam, rDrawObj, rFlyAttrSet ); // move object to visible layer SwContact* pContact = static_cast(rDrawObj.GetUserCall()); if ( pContact ) { pContact->MoveObjToVisibleLayer( &rDrawObj ); } if ( pFmt ) { // select drawing object Imp()->GetDrawView()->MarkObj( &rDrawObj, Imp()->GetPageView(), sal_False, sal_False ); } else { GetLayout()->SetAssertFlyPages(); } } /*********************************************************************** #* Class : SwFEShell #* Methode : GetPageObjs #* Datum : ?? #* Update : MA 11. Jan. 95 #***********************************************************************/ void SwFEShell::GetPageObjs( SvPtrarr& rFillArr ) { if( rFillArr.Count() ) rFillArr.Remove( 0, rFillArr.Count() ); const SwFrmFmt* pFmt; for( sal_uInt16 n = 0; n < pDoc->GetSpzFrmFmts()->Count(); ++n ) { pFmt = (const SwFrmFmt*)(*pDoc->GetSpzFrmFmts())[n]; if (FLY_AT_PAGE == pFmt->GetAnchor().GetAnchorId()) { rFillArr.Insert( (VoidPtr)pFmt, rFillArr.Count() ); } } } /*********************************************************************** #* Class : SwFEShell #* Methode : SetPageFlysNewPage #* Datum : ?? #* Update : MA 14. Feb. 95 #***********************************************************************/ void SwFEShell::SetPageObjsNewPage( SvPtrarr& rFillArr, int nOffset ) { if( !rFillArr.Count() || !nOffset ) return; StartAllAction(); StartUndo(); SwFrmFmt* pFmt; long nNewPage; SwRootFrm* pTmpRootFrm = GetLayout();//swmod 080317 sal_uInt16 nMaxPage = pTmpRootFrm->GetPageNum(); sal_Bool bTmpAssert = sal_False; for( sal_uInt16 n = 0; n < rFillArr.Count(); ++n ) { pFmt = (SwFrmFmt*)rFillArr[n]; if( USHRT_MAX != pDoc->GetSpzFrmFmts()->GetPos( pFmt )) { // FlyFmt ist noch gueltig, also behandeln SwFmtAnchor aNewAnchor( pFmt->GetAnchor() ); if ((FLY_AT_PAGE != aNewAnchor.GetAnchorId()) || 0 >= ( nNewPage = aNewAnchor.GetPageNum() + nOffset ) ) // chaos::Anchor wurde veraendert oder ungueltige SeitenNummer, // also nicht veraendern !! continue; if( sal_uInt16(nNewPage) > nMaxPage ) { if ( RES_DRAWFRMFMT == pFmt->Which() ) { SwContact *pCon = pFmt->FindContactObj(); if( pCon ) ((SwDrawContact*)pCon)->DisconnectFromLayout(); } else pFmt->DelFrms(); bTmpAssert = sal_True; } aNewAnchor.SetPageNum( sal_uInt16(nNewPage) ); pDoc->SetAttr( aNewAnchor, *pFmt ); } } if( bTmpAssert ) pTmpRootFrm->SetAssertFlyPages(); EndUndo(); EndAllAction(); } /*********************************************************************** #* Class : SwFEShell #* Methode : GetFlyFrmAttr #* Beschreibung: Alle Attribute in dem 'Koerbchen' werden mit den #* Attributen des aktuellen FlyFrms gefuellt. #* Sind Attribute nicht zu fuellen weil fehl am Platz oder #* uneindeutig (Mehrfachtselektionen) so werden sie entfernt. #* Datum : MA 03. Nov. 92 #* Update : MA 03. Feb. 94 #***********************************************************************/ sal_Bool SwFEShell::GetFlyFrmAttr( SfxItemSet &rSet ) const { SwFlyFrm *pFly = FindFlyFrm(); if ( !pFly ) { // --> OD 2006-11-08 #139670# - make code robust SwFrm* pCurrFrm( GetCurrFrm() ); if ( !pCurrFrm ) { ASSERT( false, " - missing current frame. This is a serious defect, please inform OD." ); return sal_False; } // <-- pFly = GetCurrFrm()->FindFlyFrm(); if ( !pFly ) { ASSERT( sal_False, "GetFlyFrmAttr, no Fly selected." ); return sal_False; } } SET_CURR_SHELL( (ViewShell*)this ); if( !rSet.Set( pFly->GetFmt()->GetAttrSet(), sal_True ) ) return sal_False; //Und die Attribute durchschaufeln. Unerlaubte Attribute entfernen, dann //alle restlichen Attribute besorgen und eintragen. const SfxPoolItem* pItem; if( SFX_ITEM_SET == rSet.GetItemState( RES_ANCHOR, sal_False, &pItem ) ) { SwFmtAnchor* pAnchor = (SwFmtAnchor*)pItem; RndStdIds eType = pAnchor->GetAnchorId(); if ( FLY_AT_PAGE != eType ) { // OD 12.11.2003 #i22341# - content anchor of anchor item is needed. // Thus, don't overwrite anchor item by default contructed anchor item. //rSet.Put( SwFmtAnchor( eType ) ); if ( FLY_AS_CHAR == eType ) { rSet.ClearItem( RES_OPAQUE ); rSet.ClearItem( RES_SURROUND ); } } } rSet.SetParent( pFly->GetFmt()->GetAttrSet().GetParent() ); //JP 11.02.97: Bug #35894#: die Attribute MUESSEN entfern werden! rSet.ClearItem( RES_FILL_ORDER ); rSet.ClearItem( RES_CNTNT ); //MA: Ersteinmal entfernen (Template by example usw.) rSet.ClearItem( RES_CHAIN ); return sal_True; } /*********************************************************************** #* Class : SwFEShell #* Methode : SetFlyFrmAttr #* Beschreibung: Die Attribute des aktuellen Flys aendern sich. #* Datum : MA 03. Nov. 92 #* Update : MA 01. Aug. 95 #***********************************************************************/ sal_Bool SwFEShell::SetFlyFrmAttr( SfxItemSet& rSet ) { SET_CURR_SHELL( this ); sal_Bool bRet = sal_False; if( rSet.Count() ) { SwFlyFrm *pFly = FindFlyFrm(); if( !pFly ) { ASSERT( GetCurrFrm(), "Crsr in parking zone" ); pFly = GetCurrFrm()->FindFlyFrm(); ASSERT( pFly, "SetFlyFrmAttr, no Fly selected." ); } if( pFly ) { StartAllAction(); const Point aPt( pFly->Frm().Pos() ); if( SFX_ITEM_SET == rSet.GetItemState( RES_ANCHOR, sal_False )) ::lcl_ChkAndSetNewAnchor( *this, *pFly, rSet ); SwFlyFrmFmt* pFlyFmt = (SwFlyFrmFmt*)pFly->GetFmt(); if( GetDoc()->SetFlyFrmAttr( *pFlyFmt, rSet )) { bRet = sal_True; SwFlyFrm* pFrm = pFlyFmt->GetFrm( &aPt ); if( pFrm ) SelectFlyFrm( *pFrm, sal_True ); else GetLayout()->SetAssertFlyPages(); } EndAllActionAndCall(); } } return bRet; } /*-- 30.03.2004 15:05:07--------------------------------------------------- -----------------------------------------------------------------------*/ sal_Bool SwFEShell::SetDrawingAttr( SfxItemSet& rSet ) { sal_Bool bRet = sal_False; SET_CURR_SHELL( this ); if ( !rSet.Count() || !Imp()->HasDrawView() ) return bRet; const SdrMarkList &rMrkList = Imp()->GetDrawView()->GetMarkedObjectList(); if ( rMrkList.GetMarkCount() != 1 ) return bRet; StartUndo(); SdrObject *pObj = rMrkList.GetMark( 0 )->GetMarkedSdrObj(); SwFrmFmt *pFmt = FindFrmFmt( pObj ); StartAllAction(); if( SFX_ITEM_SET == rSet.GetItemState( RES_ANCHOR, sal_False )) { RndStdIds nNew = ((SwFmtAnchor&)rSet.Get( RES_ANCHOR )).GetAnchorId(); if ( nNew != pFmt->GetAnchor().GetAnchorId() ) { ChgAnchor( nNew ); // --> OD 2004-06-17 #i26791# - clear anchor attribute in item set, // because method takes care of it. rSet.ClearItem( RES_ANCHOR ); } } if( GetDoc()->SetFlyFrmAttr( *pFmt, rSet )) { bRet = sal_True; Point aTmp; SelectObj( aTmp, 0, pObj ); } EndAllActionAndCall(); EndUndo(); return bRet; } /*********************************************************************** #* Class : SwFEShell #* Methode : ResetFlyFrmAttr #* Beschreibung: Das gewuenschte Attribut oder die im Set befindlichen #* werden zurueckgesetzt. #* Datum : MA 14. Mar. 97 #* Update : MA 14. Mar. 97 #***********************************************************************/ sal_Bool SwFEShell::ResetFlyFrmAttr( sal_uInt16 nWhich, const SfxItemSet* pSet ) { sal_Bool bRet = sal_False; if( RES_ANCHOR != nWhich && RES_CHAIN != nWhich && RES_CNTNT != nWhich ) { SET_CURR_SHELL( this ); SwFlyFrm *pFly = FindFlyFrm(); if( !pFly ) { ASSERT( GetCurrFrm(), "Crsr in parking zone" ); pFly = GetCurrFrm()->FindFlyFrm(); ASSERT( pFly, "SetFlyFrmAttr, no Fly selected." ); } if( pFly ) { StartAllAction(); if( pSet ) { SfxItemIter aIter( *pSet ); const SfxPoolItem* pItem = aIter.FirstItem(); while( pItem ) { if( !IsInvalidItem( pItem ) && RES_ANCHOR != ( nWhich = pItem->Which() ) && RES_CHAIN != nWhich && RES_CNTNT != nWhich ) pFly->GetFmt()->ResetFmtAttr( nWhich ); pItem = aIter.NextItem(); } } else pFly->GetFmt()->ResetFmtAttr( nWhich ); bRet = sal_True; EndAllActionAndCall(); GetDoc()->SetModified(); } } return bRet; } /*********************************************************************** #* Class : SwFEShell #* Methode : GetCurFrmFmt #* Beschreibung: liefert wenn Rahmen, dann Rahmenvorlage, sonst 0 #* Datum : ST 04. Jun. 93 #* Update : #***********************************************************************/ SwFrmFmt* SwFEShell::GetCurFrmFmt() const { SwFrmFmt* pRet = 0; SwLayoutFrm *pFly = FindFlyFrm(); if( pFly && ( pRet = (SwFrmFmt*)pFly->GetFmt()->DerivedFrom() ) == GetDoc()->GetDfltFrmFmt() ) pRet = 0; return pRet; } /****************************************************************************** * Methode : void SwFEShell::SetFrmFmt(SwFrmFmt *pNewFmt) * Beschreibung: * Erstellt : OK 14.04.94 15:40 * Aenderung : MA 23. Apr. 97 ******************************************************************************/ void SwFEShell::SetFrmFmt( SwFrmFmt *pNewFmt, sal_Bool bKeepOrient, Point* pDocPos ) { SwFlyFrm *pFly = 0; if(pDocPos) { const SwFrmFmt* pFmt = GetFmtFromObj( *pDocPos ); if(PTR_CAST(SwFlyFrmFmt, pFmt)) pFly = ((SwFlyFrmFmt*)pFmt)->GetFrm(); } else pFly = FindFlyFrm(); ASSERT( pFly, "SetFrmFmt: kein Frame" ); if( pFly ) { StartAllAction(); SET_CURR_SHELL( this ); SwFlyFrmFmt* pFlyFmt = (SwFlyFrmFmt*)pFly->GetFmt(); const Point aPt( pFly->Frm().Pos() ); SfxItemSet* pSet = 0; const SfxPoolItem* pItem; if( SFX_ITEM_SET == pNewFmt->GetItemState( RES_ANCHOR, sal_False, &pItem )) { pSet = new SfxItemSet( GetDoc()->GetAttrPool(), aFrmFmtSetRange ); pSet->Put( *pItem ); if( !::lcl_ChkAndSetNewAnchor( *this, *pFly, *pSet )) delete pSet, pSet = 0; } if( GetDoc()->SetFrmFmtToFly( *pFlyFmt, *pNewFmt, pSet, bKeepOrient )) { SwFlyFrm* pFrm = pFlyFmt->GetFrm( &aPt ); if( pFrm ) SelectFlyFrm( *pFrm, sal_True ); else GetLayout()->SetAssertFlyPages(); } if( pSet ) delete pSet; EndAllActionAndCall(); } } /************************************************************************* |* |* SwFEShell::GetFlyFrmFmt() |* |* Ersterstellung OK 23.06.93 13:15 |* Letzte Aenderung OK 23.06.93 13:15 |* *************************************************************************/ const SwFrmFmt* SwFEShell::GetFlyFrmFmt() const { const SwFlyFrm* pFly = FindFlyFrm(); if ( !pFly ) { SwFrm* pCurrFrm = GetCurrFrm(); pFly = pCurrFrm ? pCurrFrm->FindFlyFrm() : 0; } if( pFly ) return pFly->GetFmt(); return 0; } SwFrmFmt* SwFEShell::GetFlyFrmFmt() { SwFlyFrm* pFly = FindFlyFrm(); if ( !pFly ) { SwFrm* pCurrFrm = GetCurrFrm(); pFly = pCurrFrm ? pCurrFrm->FindFlyFrm() : 0; } if( pFly ) return pFly->GetFmt(); return 0; } /************************************************************************* |* |* SwFEShell::GetFlyRect() |* |* Ersterstellung AMA 6. Mae. 97 |* Letzte Aenderung AMA 6. Mae. 97 |* *************************************************************************/ SwRect SwFEShell::GetFlyRect() const { SwCntntFrm *pCntnt = GetCurrFrm( sal_False ); SwFlyFrm *pFly = pCntnt ? pCntnt->FindFlyFrm() : 0; if ( !pFly ) { SwRect aRect; return aRect; } else return pFly->Frm(); } /************************************************************************* |* |* SwFEShell::GetObjRect() |* |* Ersterstellung MA 22. Aug. 93 |* Letzte Aenderung MA 11. Jan. 95 |* *************************************************************************/ SwRect SwFEShell::GetObjRect() const { if( Imp()->HasDrawView() ) return Imp()->GetDrawView()->GetAllMarkedRect(); else { SwRect aRect; return aRect; } } void SwFEShell::SetObjRect( const SwRect& rRect ) { if ( Imp()->HasDrawView() ) { Imp()->GetDrawView()->SetAllMarkedRect( rRect.SVRect() ); CallChgLnk(); // rufe das AttrChangeNotify auf der UI-Seite. } } /*********************************************************************** #* Class : SwFEShell #* Methode : RequestObjectResize() #* Datum : MA 10. Feb. 95 #* Update : MA 13. Jul. 95 #***********************************************************************/ Size SwFEShell::RequestObjectResize( const SwRect &rRect, const uno::Reference < embed::XEmbeddedObject >& xObj ) { Size aResult; SwFlyFrm *pFly = FindFlyFrm( xObj ); if ( !pFly ) { aResult = rRect.SSize(); return aResult; } aResult = pFly->Prt().SSize(); sal_Bool bPosProt = pFly->GetFmt()->GetProtect().IsPosProtected(); sal_Bool bSizeProt = pFly->GetFmt()->GetProtect().IsSizeProtected(); StartAllAction(); //MA wir lassen den Fly nicht Clippen, damit die Ole-Server mit //beliebigen Wuenschen kommen koennen. Die Formatierung uebernimmt das //Clippen. Die richtige Darstellung wird per Scalierung erledigt. //Die Scalierung wird von SwNoTxtFrm::Format durch einen Aufruf von //SwWrtShell::CalcAndSetScale() erledigt. if ( rRect.SSize() != pFly->Prt().SSize() && !bSizeProt ) { Size aSz( rRect.SSize() ); //JP 28.02.2001: Task 74707 - ask for fly in fly with automatic size // const SwFrm* pAnchor; const SwTxtNode* pTNd; const SwpHints* pHts; const SwFmtFrmSize& rFrmSz = pFly->GetFmt()->GetFrmSize(); if( bCheckForOLEInCaption && 0 != rFrmSz.GetWidthPercent() && 0 != (pAnchor = pFly->GetAnchorFrm()) && pAnchor->IsTxtFrm() && !pAnchor->GetNext() && !pAnchor->GetPrev() && pAnchor->GetUpper()->IsFlyFrm() && 0 != ( pTNd = ((SwTxtFrm*)pAnchor)->GetNode()->GetTxtNode()) && 0 != ( pHts = pTNd->GetpSwpHints() )) { // search for a sequence field: const SfxPoolItem* pItem; for( sal_uInt16 n = 0, nEnd = pHts->Count(); n < nEnd; ++n ) if( RES_TXTATR_FIELD == ( pItem = &(*pHts)[ n ]->GetAttr())->Which() && TYP_SEQFLD == ((SwFmtFld*)pItem)->GetField()->GetTypeId() ) { // sequence field found SwFlyFrm* pChgFly = (SwFlyFrm*)pAnchor->GetUpper(); // calculate the changed size: // width must change, height can change Size aNewSz( aSz.Width() + pChgFly->Frm().Width() - pFly->Prt().Width(), aSz.Height() ); SwFrmFmt *pFmt = pChgFly->GetFmt(); SwFmtFrmSize aFrmSz( pFmt->GetFrmSize() ); aFrmSz.SetWidth( aNewSz.Width() ); if( ATT_MIN_SIZE != aFrmSz.GetHeightSizeType() ) { aNewSz.Height() += pChgFly->Frm().Height() - pFly->Prt().Height(); if( Abs( aNewSz.Height() - pChgFly->Frm().Height()) > 1 ) aFrmSz.SetHeight( aNewSz.Height() ); } // uebers Doc fuers Undo! pFmt->GetDoc()->SetAttr( aFrmSz, *pFmt ); break; } } // set the new Size at the fly themself if ( pFly->Prt().Height() > 0 && pFly->Prt().Width() > 0 ) { aSz.Width() += pFly->Frm().Width() - pFly->Prt().Width(); aSz.Height()+= pFly->Frm().Height()- pFly->Prt().Height(); } aResult = pFly->ChgSize( aSz ); //Wenn sich das Objekt aendert ist die Kontur hoechstwahrscheinlich daneben. ASSERT( pFly->Lower()->IsNoTxtFrm(), "Request ohne NoTxt" ); SwNoTxtNode *pNd = ((SwCntntFrm*)pFly->Lower())->GetNode()->GetNoTxtNode(); ASSERT( pNd, "Request ohne Node" ); pNd->SetContour( 0 ); ClrContourCache(); } //Wenn nur die Size angepasst werden soll, so wird eine Pos mit //ausgezeichneten Werten transportiert. Point aPt( pFly->Prt().Pos() ); aPt += pFly->Frm().Pos(); if ( rRect.Top() != LONG_MIN && rRect.Pos() != aPt && !bPosProt ) { aPt = rRect.Pos(); aPt.X() -= pFly->Prt().Left(); aPt.Y() -= pFly->Prt().Top(); //Bei Absatzgebundenen Flys muss ausgehend von der neuen Position ein //neuer Anker gesetzt werden. Anker und neue RelPos werden vom Fly //selbst berechnet und gesetzt. if( pFly->IsFlyAtCntFrm() ) ((SwFlyAtCntFrm*)pFly)->SetAbsPos( aPt ); else { const SwFrmFmt *pFmt = pFly->GetFmt(); const SwFmtVertOrient &rVert = pFmt->GetVertOrient(); const SwFmtHoriOrient &rHori = pFmt->GetHoriOrient(); const long lXDiff = aPt.X() - pFly->Frm().Left(); const long lYDiff = aPt.Y() - pFly->Frm().Top(); const Point aTmp( rHori.GetPos() + lXDiff, rVert.GetPos() + lYDiff ); pFly->ChgRelPos( aTmp ); } } SwFlyFrmFmt *pFlyFrmFmt = pFly->GetFmt(); ASSERT( pFlyFrmFmt, "fly frame format missing!" ); if ( pFlyFrmFmt ) pFlyFrmFmt->SetLastFlyFrmPrtRectPos( pFly->Prt().Pos() ); //stores the value of last Prt rect EndAllAction(); return aResult; } /*********************************************************************** #* Class : SwFEShell #* Methode : WizzardFindCurFrmFmt #* Datum : JP 31.07.95 #* Update : JP 31.07.95 #***********************************************************************/ SwFrmFmt* SwFEShell::WizzardGetFly() { // mal nicht uebers Layout den Fly suchen. Dann kann auch ohne gueltiges // Layout ein Rahmen geloescht werden. ( z.B.: fuer die Wizard's ) SwSpzFrmFmts& rSpzArr = *pDoc->GetSpzFrmFmts(); sal_uInt16 nCnt = rSpzArr.Count(); if( nCnt ) { SwNodeIndex& rCrsrNd = GetCrsr()->GetPoint()->nNode; if( rCrsrNd.GetIndex() > pDoc->GetNodes().GetEndOfExtras().GetIndex() ) // Cusor steht im Body-Bereich! return 0; for( sal_uInt16 n = 0; n < nCnt; ++n ) { SwFrmFmt* pFmt = rSpzArr[ n ]; const SwNodeIndex* pIdx = pFmt->GetCntnt( sal_False ).GetCntntIdx(); SwStartNode* pSttNd; if( pIdx && 0 != ( pSttNd = pIdx->GetNode().GetStartNode() ) && pSttNd->GetIndex() < rCrsrNd.GetIndex() && rCrsrNd.GetIndex() < pSttNd->EndOfSectionIndex() ) { // gefunden: also raus damit return pFmt; } } } return 0; } void SwFEShell::SetFlyName( const String& rName ) { SwLayoutFrm *pFly = FindFlyFrm(); if( pFly ) GetDoc()->SetFlyName( *(SwFlyFrmFmt*)pFly->GetFmt(), rName ); else { ASSERT( sal_False, "SetFlyName, no FlyFrame selected" ) } } const String& SwFEShell::GetFlyName() const { SwLayoutFrm *pFly = FindFlyFrm(); if( pFly ) return pFly->GetFmt()->GetName(); ASSERT( sal_False, "GetFlyName, no FlyFrame selected" ) return aEmptyStr; } const uno::Reference < embed::XEmbeddedObject > SwFEShell::GetOleRef() const { uno::Reference < embed::XEmbeddedObject > xObj; SwFlyFrm * pFly = FindFlyFrm(); if (pFly && pFly->Lower() && pFly->Lower()->IsNoTxtFrm()) { SwOLENode *pNd = ((SwNoTxtFrm*)pFly->Lower())->GetNode()->GetOLENode(); if (pNd) xObj = pNd->GetOLEObj().GetOleRef(); } return xObj; } String SwFEShell::GetUniqueGrfName() const { return GetDoc()->GetUniqueGrfName(); } const SwFrmFmt* SwFEShell::IsURLGrfAtPos( const Point& rPt, String* pURL, String *pTargetFrameName, String *pDescription ) const { if( !Imp()->HasDrawView() ) return 0; SdrObject* pObj; SdrPageView* pPV; const SwFrmFmt* pRet = 0; SwDrawView *pDView = (SwDrawView*)Imp()->GetDrawView(); sal_uInt16 nOld = pDView->GetHitTolerancePixel(); pDView->SetHitTolerancePixel( 2 ); if( pDView->PickObj( rPt, pDView->getHitTolLog(), pObj, pPV,SDRSEARCH_PICKMACRO ) && pObj->ISA(SwVirtFlyDrawObj) ) { SwFlyFrm *pFly = ((SwVirtFlyDrawObj*)pObj)->GetFlyFrm(); const SwFmtURL &rURL = pFly->GetFmt()->GetURL(); if( rURL.GetURL().Len() || rURL.GetMap() ) { sal_Bool bSetTargetFrameName = pTargetFrameName != 0; sal_Bool bSetDescription = pDescription != 0; if ( rURL.GetMap() ) { IMapObject *pObject = pFly->GetFmt()->GetIMapObject( rPt, pFly ); if ( pObject && pObject->GetURL().Len() ) { if( pURL ) *pURL = pObject->GetURL(); if ( bSetTargetFrameName && pObject->GetTarget().Len() ) { bSetTargetFrameName = sal_False; *pTargetFrameName = pObject->GetTarget(); } if ( bSetDescription ) { bSetDescription = sal_False; *pDescription = pObject->GetAltText(); } pRet = pFly->GetFmt(); } } else { if( pURL ) { *pURL = rURL.GetURL(); if( rURL.IsServerMap() ) { // dann die rel. Pixel Position anhaengen !! Point aPt( rPt ); aPt -= pFly->Frm().Pos(); // ohne MapMode-Offset, ohne Offset, o ... !!!!! aPt = GetOut()->LogicToPixel( aPt, MapMode( MAP_TWIP ) ); ((( *pURL += '?' ) += String::CreateFromInt32( aPt.X() )) += ',' ) += String::CreateFromInt32(aPt.Y() ); } } pRet = pFly->GetFmt(); } if ( bSetTargetFrameName ) *pTargetFrameName = rURL.GetTargetFrameName(); if ( bSetDescription ) *pDescription = pFly->GetFmt()->GetName(); } } pDView->SetHitTolerancePixel( nOld ); return pRet; } const Graphic *SwFEShell::GetGrfAtPos( const Point &rPt, String &rName, sal_Bool &rbLink ) const { if( !Imp()->HasDrawView() ) return 0; SdrObject* pObj; SdrPageView* pPV; SwDrawView *pDView = (SwDrawView*)Imp()->GetDrawView(); if( pDView->PickObj( rPt, pDView->getHitTolLog(), pObj, pPV ) && pObj->ISA(SwVirtFlyDrawObj) ) { SwFlyFrm *pFly = ((SwVirtFlyDrawObj*)pObj)->GetFlyFrm(); if ( pFly->Lower() && pFly->Lower()->IsNoTxtFrm() ) { SwGrfNode *pNd = ((SwCntntFrm*)pFly->Lower())->GetNode()->GetGrfNode(); if ( pNd ) { if ( pNd->IsGrfLink() ) { //Halbfertige Grafik? ::sfx2::SvLinkSource* pLnkObj = pNd->GetLink()->GetObj(); if( pLnkObj && pLnkObj->IsPending() ) return 0; rbLink = sal_True; } pNd->GetFileFilterNms( &rName, 0 ); if ( !rName.Len() ) rName = pFly->GetFmt()->GetName(); pNd->SwapIn( sal_True ); return &pNd->GetGrf(); } } } return 0; } const SwFrmFmt* SwFEShell::GetFmtFromObj( const Point& rPt, SwRect** pRectToFill ) const { SwFrmFmt* pRet = 0; if( Imp()->HasDrawView() ) { SdrObject* pObj; SdrPageView* pPView; SwDrawView *pDView = (SwDrawView*)Imp()->GetDrawView(); sal_uInt16 nOld = pDView->GetHitTolerancePixel(); // Tattergrenze fuer Drawing-SS pDView->SetHitTolerancePixel( pDView->GetMarkHdlSizePixel()/2 ); if( pDView->PickObj( rPt, pDView->getHitTolLog(), pObj, pPView, SDRSEARCH_PICKMARKABLE ) ) { // dann teste mal was es ist: if ( pObj->ISA(SwVirtFlyDrawObj) ) pRet = ((SwVirtFlyDrawObj*)pObj)->GetFmt(); else if ( pObj->GetUserCall() ) //nicht fuer Gruppenobjekte pRet = ((SwDrawContact*)pObj->GetUserCall())->GetFmt(); if(pRet && pRectToFill) **pRectToFill = pObj->GetCurrentBoundRect(); } pDView->SetHitTolerancePixel( nOld ); } return pRet; } // returns a format too, if the point is over the text of any fly const SwFrmFmt* SwFEShell::GetFmtFromAnyObj( const Point& rPt ) const { const SwFrmFmt* pRet = GetFmtFromObj( rPt ); if( !pRet || RES_FLYFRMFMT == pRet->Which() ) { SwPosition aPos( *GetCrsr()->GetPoint() ); Point aPt( rPt ); GetLayout()->GetCrsrOfst( &aPos, aPt ); SwCntntNode *pNd = aPos.nNode.GetNode().GetCntntNode(); SwFrm* pFrm = pNd->getLayoutFrm( GetLayout(), &rPt, 0, sal_False )->FindFlyFrm(); pRet = pFrm ? ((SwLayoutFrm*)pFrm)->GetFmt() : 0; } return pRet; } ObjCntType SwFEShell::GetObjCntType( const SdrObject& rObj ) const { ObjCntType eType = OBJCNT_NONE; // OD 23.06.2003 #108784# - investigate 'master' drawing object, if method // is called for a 'virtual' drawing object. const SdrObject* pInvestigatedObj; if ( rObj.ISA(SwDrawVirtObj) ) { const SwDrawVirtObj* pDrawVirtObj = static_cast(&rObj); pInvestigatedObj = &(pDrawVirtObj->GetReferencedObj()); } else { pInvestigatedObj = &rObj; } if( FmFormInventor == pInvestigatedObj->GetObjInventor() ) { eType = OBJCNT_CONTROL; uno::Reference< awt::XControlModel > xModel = ((SdrUnoObj&)(*pInvestigatedObj)).GetUnoControlModel(); if( xModel.is() ) { uno::Any aVal; OUString sName = OUString::createFromAscii("ButtonType"); uno::Reference< beans::XPropertySet > xSet(xModel, uno::UNO_QUERY); uno::Reference< beans::XPropertySetInfo > xInfo = xSet->getPropertySetInfo(); if(xInfo->hasPropertyByName( sName )) { beans::Property xProperty = xInfo->getPropertyByName( sName ); aVal = xSet->getPropertyValue( sName ); if( aVal.getValue() && form::FormButtonType_URL == *((form::FormButtonType*)aVal.getValue()) ) eType = OBJCNT_URLBUTTON; } } } else if( pInvestigatedObj->ISA(SwVirtFlyDrawObj) ) { SwFlyFrm *pFly = ((SwVirtFlyDrawObj&)(*pInvestigatedObj)).GetFlyFrm(); if ( pFly->Lower() && pFly->Lower()->IsNoTxtFrm() ) { if ( ((SwCntntFrm*)pFly->Lower())->GetNode()->GetGrfNode() ) eType = OBJCNT_GRF; else eType = OBJCNT_OLE; } else eType = OBJCNT_FLY; } else if ( pInvestigatedObj->ISA( SdrObjGroup ) ) { SwDrawContact* pDrawContact( dynamic_cast(GetUserCall( pInvestigatedObj ) ) ); if ( !pDrawContact ) { ASSERT( false, " - missing draw contact object" ); eType = OBJCNT_NONE; } else { SwFrmFmt* pFrmFmt( pDrawContact->GetFmt() ); if ( !pFrmFmt ) { ASSERT( false, " - missing frame format" ); eType = OBJCNT_NONE; } else if ( FLY_AS_CHAR != pFrmFmt->GetAnchor().GetAnchorId() ) { eType = OBJCNT_GROUPOBJ; } } } else eType = OBJCNT_SIMPLE; return eType; } ObjCntType SwFEShell::GetObjCntType( const Point &rPt, SdrObject *&rpObj ) const { ObjCntType eType = OBJCNT_NONE; if( Imp()->HasDrawView() ) { SdrObject* pObj; SdrPageView* pPView; SwDrawView *pDView = (SwDrawView*)Imp()->GetDrawView(); sal_uInt16 nOld = pDView->GetHitTolerancePixel(); // Tattergrenze fuer Drawing-SS pDView->SetHitTolerancePixel( pDView->GetMarkHdlSizePixel()/2 ); if( pDView->PickObj( rPt, pDView->getHitTolLog(), pObj, pPView, SDRSEARCH_PICKMARKABLE ) ) eType = GetObjCntType( *(rpObj = pObj) ); pDView->SetHitTolerancePixel( nOld ); } return eType; } ObjCntType SwFEShell::GetObjCntTypeOfSelection( SdrObject** ppObj ) const { ObjCntType eType = OBJCNT_NONE; if( Imp()->HasDrawView() ) { const SdrMarkList &rMrkList = Imp()->GetDrawView()->GetMarkedObjectList(); for( sal_uInt32 i = 0, nE = rMrkList.GetMarkCount(); i < nE; ++i ) { SdrObject* pObj = rMrkList.GetMark( i )->GetMarkedSdrObj(); if( !pObj ) continue; ObjCntType eTmp = GetObjCntType( *pObj ); if( !i ) { eType = eTmp; if( ppObj ) *ppObj = pObj; } else if( eTmp != eType ) { eType = OBJCNT_DONTCARE; // einmal DontCare, immer DontCare! break; } } } return eType; } sal_Bool SwFEShell::ReplaceSdrObj( const String& rGrfName, const String& rFltName, const Graphic* pGrf ) { SET_CURR_SHELL( this ); sal_Bool bRet = sal_False; const SdrMarkList *pMrkList; if( Imp()->HasDrawView() && 1 == ( pMrkList = &Imp()->GetDrawView()->GetMarkedObjectList())->GetMarkCount() ) { SdrObject* pObj = pMrkList->GetMark( 0 )->GetMarkedSdrObj(); SwFrmFmt *pFmt = FindFrmFmt( pObj ); // Attribute sichern und dann an der Grafik setzen SfxItemSet aFrmSet( pDoc->GetAttrPool(), pFmt->GetAttrSet().GetRanges() ); aFrmSet.Set( pFmt->GetAttrSet() ); // Groesse und Position setzen ?? if( !pObj->ISA(SwVirtFlyDrawObj) ) { // dann mal los: const Rectangle &rBound = pObj->GetSnapRect(); Point aRelPos( pObj->GetRelativePos() ); const long nWidth = rBound.Right() - rBound.Left(); const long nHeight= rBound.Bottom() - rBound.Top(); aFrmSet.Put( SwFmtFrmSize( ATT_MIN_SIZE, Max( nWidth, long(MINFLY) ), Max( nHeight, long(MINFLY) ))); if( SFX_ITEM_SET != aFrmSet.GetItemState( RES_HORI_ORIENT )) aFrmSet.Put( SwFmtHoriOrient( aRelPos.X(), text::HoriOrientation::NONE, text::RelOrientation::FRAME )); if( SFX_ITEM_SET != aFrmSet.GetItemState( RES_VERT_ORIENT )) aFrmSet.Put( SwFmtVertOrient( aRelPos.Y(), text::VertOrientation::NONE, text::RelOrientation::FRAME )); } pObj->GetOrdNum(); StartAllAction(); StartUndo(); // das "Sdr-Object" loeschen und dafuer die Grafik einfuegen DelSelectedObj(); pFmt = GetDoc()->Insert( *GetCrsr(), rGrfName, rFltName, pGrf, &aFrmSet, NULL, NULL ); // die Ordnungsnummer (Z-Order) noch uebertragen // JP 04.07.98: klappt aber nicht richtig! //SdrObject* pNewObj = ::FindSdrObject( pFmt ); //pNewObj->SetOrdNum( nOrdNum ); EndUndo(); EndAllAction(); bRet = sal_True; } return bRet; } static sal_uInt16 SwFmtGetPageNum(const SwFlyFrmFmt * pFmt) { ASSERT(pFmt != NULL, "invalid argument"); SwFlyFrm * pFrm = pFmt->GetFrm(); sal_uInt16 aResult; if (pFrm != NULL) aResult = pFrm->GetPhyPageNum(); else aResult = pFmt->GetAnchor().GetPageNum(); return aResult; } #include void SwFEShell::GetConnectableFrmFmts(SwFrmFmt & rFmt, const String & rReference, sal_Bool bSuccessors, ::std::vector< String > & aPrevPageVec, ::std::vector< String > & aThisPageVec, ::std::vector< String > & aNextPageVec, ::std::vector< String > & aRestVec) { StartAction(); SwFmtChain rChain = rFmt.GetChain(); SwFrmFmt * pOldChainNext = (SwFrmFmt *) rChain.GetNext(); SwFrmFmt * pOldChainPrev = (SwFrmFmt *) rChain.GetPrev(); if (pOldChainNext) pDoc->Unchain(rFmt); if (pOldChainPrev) pDoc->Unchain(*pOldChainPrev); sal_uInt16 nCnt = pDoc->GetFlyCount(FLYCNTTYPE_FRM); /* potential successors resp. predecessors */ ::std::vector< const SwFrmFmt * > aTmpSpzArray; (SwFrmFmt *) pDoc->FindFlyByName(rReference); for (sal_uInt16 n = 0; n < nCnt; n++) { const SwFrmFmt & rFmt1 = *(pDoc->GetFlyNum(n, FLYCNTTYPE_FRM)); /* pFmt is a potential successor of rFmt if it is chainable after rFmt. pFmt is a potential predecessor of rFmt if rFmt is chainable after pFmt. */ int nChainState; if (bSuccessors) nChainState = pDoc->Chainable(rFmt, rFmt1); else nChainState = pDoc->Chainable(rFmt1, rFmt); if (nChainState == SW_CHAIN_OK) { aTmpSpzArray.push_back(&rFmt1); } } if (aTmpSpzArray.size() > 0) { aPrevPageVec.clear(); aThisPageVec.clear(); aNextPageVec.clear(); aRestVec.clear(); /* number of page rFmt resides on */ sal_uInt16 nPageNum = SwFmtGetPageNum((SwFlyFrmFmt *) &rFmt); ::std::vector< const SwFrmFmt * >::const_iterator aIt; for (aIt = aTmpSpzArray.begin(); aIt != aTmpSpzArray.end(); aIt++) { String aString = (*aIt)->GetName(); /* rFmt is not a vaild successor or predecessor of itself */ if (aString != rReference && aString != rFmt.GetName()) { sal_uInt16 nNum1 = SwFmtGetPageNum((SwFlyFrmFmt *) *aIt); if (nNum1 == nPageNum -1) aPrevPageVec.push_back(aString); else if (nNum1 == nPageNum) aThisPageVec.push_back(aString); else if (nNum1 == nPageNum + 1) aNextPageVec.push_back(aString); else aRestVec.push_back(aString); } } } if (pOldChainNext) pDoc->Chain(rFmt, *pOldChainNext); if (pOldChainPrev) pDoc->Chain(*pOldChainPrev, rFmt); EndAction(); } // --> OD 2009-07-13 #i73249# const String SwFEShell::GetObjTitle() const { String aTitle; if ( Imp()->HasDrawView() ) { const SdrMarkList *pMrkList = &Imp()->GetDrawView()->GetMarkedObjectList(); if ( pMrkList->GetMarkCount() == 1 ) { const SdrObject* pObj = pMrkList->GetMark( 0 )->GetMarkedSdrObj(); const SwFrmFmt* pFmt = FindFrmFmt( pObj ); if ( pFmt->Which() == RES_FLYFRMFMT ) { aTitle = dynamic_cast(pFmt)->GetObjTitle(); } else { aTitle = pObj->GetTitle(); } } } return aTitle; } void SwFEShell::SetObjTitle( const String& rTitle ) { if ( Imp()->HasDrawView() ) { const SdrMarkList *pMrkList = &Imp()->GetDrawView()->GetMarkedObjectList(); if ( pMrkList->GetMarkCount() == 1 ) { SdrObject* pObj = pMrkList->GetMark( 0 )->GetMarkedSdrObj(); SwFrmFmt* pFmt = FindFrmFmt( pObj ); if ( pFmt->Which() == RES_FLYFRMFMT ) { GetDoc()->SetFlyFrmTitle( *(dynamic_cast(pFmt)), rTitle ); } else { pObj->SetTitle( rTitle ); } } } } const String SwFEShell::GetObjDescription() const { String aDescription; if ( Imp()->HasDrawView() ) { const SdrMarkList *pMrkList = &Imp()->GetDrawView()->GetMarkedObjectList(); if ( pMrkList->GetMarkCount() == 1 ) { const SdrObject* pObj = pMrkList->GetMark( 0 )->GetMarkedSdrObj(); const SwFrmFmt* pFmt = FindFrmFmt( pObj ); if ( pFmt->Which() == RES_FLYFRMFMT ) { aDescription = dynamic_cast(pFmt)->GetObjDescription(); } else { aDescription = pObj->GetDescription(); } } } return aDescription; } void SwFEShell::SetObjDescription( const String& rDescription ) { if ( Imp()->HasDrawView() ) { const SdrMarkList *pMrkList = &Imp()->GetDrawView()->GetMarkedObjectList(); if ( pMrkList->GetMarkCount() == 1 ) { SdrObject* pObj = pMrkList->GetMark( 0 )->GetMarkedSdrObj(); SwFrmFmt* pFmt = FindFrmFmt( pObj ); if ( pFmt->Which() == RES_FLYFRMFMT ) { GetDoc()->SetFlyFrmDescription( *(dynamic_cast(pFmt)), rDescription ); } else { pObj->SetDescription( rDescription ); } } } } void SwFEShell::AlignFormulaToBaseline( const uno::Reference < embed::XEmbeddedObject >& xObj, SwFlyFrm * pFly ) { #if OSL_DEBUG_LEVEL > 1 SvGlobalName aCLSID( xObj->getClassID() ); const bool bStarMath = ( SotExchange::IsMath( aCLSID ) != 0 ); ASSERT( bStarMath, "AlignFormulaToBaseline should only be called for Math objects" ); if ( !bStarMath ) return; #endif if (!pFly) pFly = FindFlyFrm( xObj ); ASSERT( pFly , "No fly frame!" ); SwFrmFmt * pFrmFmt = pFly ? pFly->GetFmt() : 0; // baseline to baseline alignment should only be applied to formulas anchored as char if ( pFly && pFrmFmt && FLY_AS_CHAR == pFrmFmt->GetAnchor().GetAnchorId() ) { // get baseline from Math object uno::Any aBaseline; if( svt::EmbeddedObjectRef::TryRunningState( xObj ) ) { uno::Reference < beans::XPropertySet > xSet( xObj->getComponent(), uno::UNO_QUERY ); if ( xSet.is() ) { try { aBaseline = xSet->getPropertyValue( rtl::OUString( RTL_CONSTASCII_USTRINGPARAM("BaseLine") ) ); } catch ( uno::Exception& ) { ASSERT( sal_False , "Baseline could not be retrieved from Starmath!" ); } } } sal_Int32 nBaseline = ::comphelper::getINT32(aBaseline); const MapMode aSourceMapMode( MAP_100TH_MM ); const MapMode aTargetMapMode( MAP_TWIP ); nBaseline = OutputDevice::LogicToLogic( nBaseline, aSourceMapMode.GetMapUnit(), aTargetMapMode.GetMapUnit() ); ASSERT( nBaseline > 0, "Wrong value of Baseline while retrieving from Starmath!" ); //nBaseline must be moved by aPrt position const SwFlyFrmFmt *pFlyFrmFmt = pFly->GetFmt(); ASSERT( pFlyFrmFmt, "fly frame format missing!" ); if ( pFlyFrmFmt ) nBaseline += pFlyFrmFmt->GetLastFlyFrmPrtRectPos().Y(); const SwFmtVertOrient &rVert = pFrmFmt->GetVertOrient(); SwFmtVertOrient aVert( rVert ); aVert.SetPos( -nBaseline ); aVert.SetVertOrient( com::sun::star::text::VertOrientation::NONE ); pFrmFmt->LockModify(); pFrmFmt->SetFmtAttr( aVert ); pFrmFmt->UnlockModify(); pFly->InvalidatePos(); } } void SwFEShell::AlignAllFormulasToBaseline() { StartAllAction(); SwStartNode *pStNd; SwNodeIndex aIdx( *GetNodes().GetEndOfAutotext().StartOfSectionNode(), 1 ); while ( 0 != (pStNd = aIdx.GetNode().GetStartNode()) ) { ++aIdx; SwOLENode *pOleNode = dynamic_cast< SwOLENode * >( &aIdx.GetNode() ); if ( pOleNode ) { const uno::Reference < embed::XEmbeddedObject > & xObj( pOleNode->GetOLEObj().GetOleRef() ); if (xObj.is()) { SvGlobalName aCLSID( xObj->getClassID() ); if ( SotExchange::IsMath( aCLSID ) ) AlignFormulaToBaseline( xObj ); } } aIdx.Assign( *pStNd->EndOfSectionNode(), + 1 ); } EndAllAction(); }