/************************************************************** * * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. * *************************************************************/ // MARKER(update_precomp.py): autogen include statement, do not remove #include "precompiled_sw.hxx" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "pagefrm.hxx" #include "colfrm.hxx" #include "doc.hxx" #include "fesh.hxx" #include "viewimp.hxx" #include "viewopt.hxx" #include "pam.hxx" #include "dflyobj.hxx" #include "dcontact.hxx" #include "frmtool.hxx" #include "docsh.hxx" #include "tabfrm.hxx" #include "rowfrm.hxx" #include "ftnfrm.hxx" #include "txtfrm.hxx" #include "notxtfrm.hxx" #include "flyfrms.hxx" #include "layact.hxx" #include "pagedesc.hxx" #include "section.hxx" #include "sectfrm.hxx" #include "node2lay.hxx" #include "ndole.hxx" #include "ndtxt.hxx" #include "swtable.hxx" #include "hints.hxx" #include #include #include #include "mdiexp.hxx" #include "statstr.hrc" #include #include #include #include #include #include // ftnfrm.cxx: void lcl_RemoveFtns( SwFtnBossFrm* pBoss, sal_Bool bPageOnly, sal_Bool bEndNotes ); using namespace ::com::sun::star; sal_Bool bObjsDirect = sal_True; sal_Bool bDontCreateObjects = sal_False; sal_Bool bSetCompletePaintOnInvalidate = sal_False; sal_uInt8 StackHack::nCnt = 0; sal_Bool StackHack::bLocked = sal_False; /*************************************************************************/ SwFrmNotify::SwFrmNotify( SwFrm *pF ) : pFrm( pF ), aFrm( pF->Frm() ), aPrt( pF->Prt() ), bInvaKeep( sal_False ), bValidSize( pF->GetValidSizeFlag() ), mbFrmDeleted( false ) // #i49383# { if ( pF->IsTxtFrm() ) { mnFlyAnchorOfst = ((SwTxtFrm*)pF)->GetBaseOfstForFly( sal_True ); mnFlyAnchorOfstNoWrap = ((SwTxtFrm*)pF)->GetBaseOfstForFly( sal_False ); } else { mnFlyAnchorOfst = 0; mnFlyAnchorOfstNoWrap = 0; } bHadFollow = pF->IsCntntFrm() ? (((SwCntntFrm*)pF)->GetFollow() ? sal_True : sal_False) : sal_False; } /*************************************************************************/ SwFrmNotify::~SwFrmNotify() { // #i49383# if ( mbFrmDeleted ) { return; } SWRECTFN( pFrm ) const sal_Bool bAbsP = POS_DIFF( aFrm, pFrm->Frm() ); const sal_Bool bChgWidth = (aFrm.*fnRect->fnGetWidth)() != (pFrm->Frm().*fnRect->fnGetWidth)(); const sal_Bool bChgHeight = (aFrm.*fnRect->fnGetHeight)()!=(pFrm->Frm().*fnRect->fnGetHeight)(); const sal_Bool bChgFlyBasePos = pFrm->IsTxtFrm() && ( ( mnFlyAnchorOfst != ((SwTxtFrm*)pFrm)->GetBaseOfstForFly( sal_True ) ) || ( mnFlyAnchorOfstNoWrap != ((SwTxtFrm*)pFrm)->GetBaseOfstForFly( sal_False ) ) ); if ( pFrm->IsFlowFrm() && !pFrm->IsInFtn() ) { SwFlowFrm *pFlow = SwFlowFrm::CastFlowFrm( pFrm ); if ( !pFlow->IsFollow() ) { if ( !pFrm->GetIndPrev() ) { if ( bInvaKeep ) { SwFrm *pPre = pFrm->FindPrev(); if ( pPre && pPre->IsFlowFrm() ) { // 1. pPre wants to keep with me: bool bInvalidPrePos = SwFlowFrm::CastFlowFrm( pPre )->IsKeep( *pPre->GetAttrSet() ) && pPre->GetIndPrev(); // 2. pPre is a table and the last row wants to keep with me: if ( !bInvalidPrePos && pPre->IsTabFrm() ) { SwTabFrm* pPreTab = static_cast(pPre); if ( pPreTab->GetFmt()->GetDoc()->get(IDocumentSettingAccess::TABLE_ROW_KEEP) ) { SwRowFrm* pLastRow = static_cast(pPreTab->GetLastLower()); if ( pLastRow && pLastRow->ShouldRowKeepWithNext() ) bInvalidPrePos = true; } } if ( bInvalidPrePos ) pPre->InvalidatePos(); } } } else if ( !pFlow->HasFollow() ) { long nOldHeight = (aFrm.*fnRect->fnGetHeight)(); long nNewHeight = (pFrm->Frm().*fnRect->fnGetHeight)(); if( (nOldHeight > nNewHeight) || (!nOldHeight && nNewHeight) ) pFlow->CheckKeep(); } } } if ( bAbsP ) { pFrm->SetCompletePaint(); SwFrm* pNxt = pFrm->GetIndNext(); // #121888# - skip empty section frames while ( pNxt && pNxt->IsSctFrm() && !static_cast(pNxt)->GetSection() ) { pNxt = pNxt->GetIndNext(); } if ( pNxt ) pNxt->InvalidatePos(); else { // #104100# - correct condition for setting retouche // flag for vertical layout. if( pFrm->IsRetoucheFrm() && (aFrm.*fnRect->fnTopDist)( (pFrm->Frm().*fnRect->fnGetTop)() ) > 0 ) { pFrm->SetRetouche(); } // A fresh follow frame does not have to be invalidated, because // it is already formatted: if ( bHadFollow || !pFrm->IsCntntFrm() || !((SwCntntFrm*)pFrm)->GetFollow() ) { if ( !pFrm->IsTabFrm() || !((SwTabFrm*)pFrm)->GetFollow() ) pFrm->InvalidateNextPos(); } } } //Fuer Hintergrundgrafiken muss bei Groessenaenderungen ein Repaint her. const sal_Bool bPrtWidth = (aPrt.*fnRect->fnGetWidth)() != (pFrm->Prt().*fnRect->fnGetWidth)(); const sal_Bool bPrtHeight = (aPrt.*fnRect->fnGetHeight)()!=(pFrm->Prt().*fnRect->fnGetHeight)(); if ( bPrtWidth || bPrtHeight ) { //UUUU drawinglayer::attribute::SdrAllFillAttributesHelperPtr aFillAttributes(pFrm->getSdrAllFillAttributesHelper()); if(aFillAttributes.get() && aFillAttributes->isUsed()) { //UUUU use SetCompletePaint if needed if(aFillAttributes->needCompleteRepaint()) { pFrm->SetCompletePaint(); } } else { const SvxGraphicPosition ePos = pFrm->GetAttrSet()->GetBackground().GetGraphicPos(); if(GPOS_NONE != ePos && GPOS_TILED != ePos) pFrm->SetCompletePaint(); } } else { // #97597# - consider case that *only* margins between // frame and printing area has changed. Then, frame has to be repainted, // in order to force paint of the margin areas. if ( !bAbsP && (bChgWidth || bChgHeight) ) { pFrm->SetCompletePaint(); } } const sal_Bool bPrtP = POS_DIFF( aPrt, pFrm->Prt() ); if ( bAbsP || bPrtP || bChgWidth || bChgHeight || bPrtWidth || bPrtHeight || bChgFlyBasePos ) { if( pFrm->IsAccessibleFrm() ) { SwRootFrm *pRootFrm = pFrm->getRootFrm(); if( pRootFrm && pRootFrm->IsAnyShellAccessible() && pRootFrm->GetCurrShell() ) { pRootFrm->GetCurrShell()->Imp()->MoveAccessibleFrm( pFrm, aFrm ); } } // Notification of anchored objects if ( pFrm->GetDrawObjs() ) { const SwSortedObjs &rObjs = *pFrm->GetDrawObjs(); SwPageFrm* pPageFrm = 0; for ( sal_uInt32 i = 0; i < rObjs.Count(); ++i ) { // OD 2004-03-31 #i26791# - no general distinction between // Writer fly frames and drawing objects bool bNotify = false; bool bNotifySize = false; SwAnchoredObject* pObj = rObjs[i]; SwContact* pContact = ::GetUserCall( pObj->GetDrawObj() ); // --> OD 2004-12-08 #115759# const bool bAnchoredAsChar = pContact->ObjAnchoredAsChar(); if ( !bAnchoredAsChar ) // <-- { // Notify object, which aren't anchored as-character: // always notify objects, if frame position has changed // or if the object is to-page|to-fly anchored. if ( bAbsP || pContact->ObjAnchoredAtPage() || pContact->ObjAnchoredAtFly() ) { bNotify = true; // assure that to-fly anchored Writer fly frames are // registered at the correct page frame, if frame // position has changed. if ( bAbsP && pContact->ObjAnchoredAtFly() && pObj->ISA(SwFlyFrm) ) { // determine to-fly anchored Writer fly frame SwFlyFrm* pFlyFrm = static_cast(pObj); // determine page frame of to-fly anchored // Writer fly frame SwPageFrm* pFlyPageFrm = pFlyFrm->FindPageFrm(); // determine page frame, if needed. if ( !pPageFrm ) { pPageFrm = pFrm->FindPageFrm(); } if ( pPageFrm != pFlyPageFrm ) { ASSERT( pFlyPageFrm, "~SwFrmNotify: Fly from Nowhere" ); if( pFlyPageFrm ) pFlyPageFrm->MoveFly( pFlyFrm, pPageFrm ); else pPageFrm->AppendFlyToPage( pFlyFrm ); } } } // otherwise the objects are notified in dependence to // its positioning and alignment else { const SwFmtVertOrient& rVert = pContact->GetFmt()->GetVertOrient(); if ( ( rVert.GetVertOrient() == text::VertOrientation::CENTER || rVert.GetVertOrient() == text::VertOrientation::BOTTOM || rVert.GetRelationOrient() == text::RelOrientation::PRINT_AREA ) && ( bChgHeight || bPrtHeight ) ) { bNotify = true; } if ( !bNotify ) { const SwFmtHoriOrient& rHori = pContact->GetFmt()->GetHoriOrient(); if ( ( rHori.GetHoriOrient() != text::HoriOrientation::NONE || rHori.GetRelationOrient()== text::RelOrientation::PRINT_AREA || rHori.GetRelationOrient()== text::RelOrientation::FRAME ) && ( bChgWidth || bPrtWidth || bChgFlyBasePos ) ) { bNotify = true; } } } } else if ( bPrtWidth ) { // Notify as-character anchored objects, if printing area // width has changed. bNotify = true; bNotifySize = true; } // perform notification via the corresponding invalidations if ( bNotify ) { if ( pObj->ISA(SwFlyFrm) ) { SwFlyFrm* pFlyFrm = static_cast(pObj); if ( bNotifySize ) pFlyFrm->_InvalidateSize(); // --> OD 2004-12-08 #115759# - no invalidation of // position for as-character anchored objects. if ( !bAnchoredAsChar ) { pFlyFrm->_InvalidatePos(); } // <-- pFlyFrm->_Invalidate(); } else if ( pObj->ISA(SwAnchoredDrawObject) ) { // --> OD 2004-12-08 #115759# - no invalidation of // position for as-character anchored objects. if ( !bAnchoredAsChar ) { pObj->InvalidateObjPos(); } // <-- } else { ASSERT( false, " - unknown anchored object type. Please inform OD." ); } } } } } else if( pFrm->IsTxtFrm() && bValidSize != pFrm->GetValidSizeFlag() ) { SwRootFrm *pRootFrm = pFrm->getRootFrm(); if( pRootFrm && pRootFrm->IsAnyShellAccessible() && pRootFrm->GetCurrShell() ) { pRootFrm->GetCurrShell()->Imp()->InvalidateAccessibleFrmContent( pFrm ); } } // #i9046# Automatic frame width SwFlyFrm* pFly = 0; // --> FME 2004-10-21 #i35879# Do not trust the inf flags. pFrm does not // necessarily have to have an upper! if ( !pFrm->IsFlyFrm() && 0 != ( pFly = pFrm->ImplFindFlyFrm() ) ) // <-- { // --> OD 2006-05-08 #i61999# // no invalidation of columned Writer fly frames, because automatic // width doesn't make sense for such Writer fly frames. if ( pFly->Lower() && !pFly->Lower()->IsColumnFrm() ) { const SwFmtFrmSize &rFrmSz = pFly->GetFmt()->GetFrmSize(); // This could be optimized. Basically the fly frame only has to // be invalidated, if the first line of pFrm (if pFrm is a content // frame, for other frame types its the print area) has changed its // size and pFrm was responsible for the current width of pFly. On // the other hand, this is only rarely used and re-calculation of // the fly frame does not cause too much trouble. So we keep it this // way: if ( ATT_FIX_SIZE != rFrmSz.GetWidthSizeType() ) { // --> OD 2005-07-29 #i50668#, #i50998# - invalidation of position // of as-character anchored fly frames not needed and can cause // layout loops if ( !pFly->ISA(SwFlyInCntFrm) ) { pFly->InvalidatePos(); } // <-- pFly->InvalidateSize(); } } // <-- } } /*************************************************************************/ SwLayNotify::SwLayNotify( SwLayoutFrm *pLayFrm ) : SwFrmNotify( pLayFrm ), bLowersComplete( sal_False ) { } /*************************************************************************/ // OD 2004-05-11 #i28701# - local method to invalidate the position of all // frames inclusive its floating screen objects, which are lowers of the given // layout frame void lcl_InvalidatePosOfLowers( SwLayoutFrm& _rLayoutFrm ) { if( _rLayoutFrm.IsFlyFrm() && _rLayoutFrm.GetDrawObjs() ) { _rLayoutFrm.InvalidateObjs( true, false ); } SwFrm* pLowerFrm = _rLayoutFrm.Lower(); while ( pLowerFrm ) { pLowerFrm->InvalidatePos(); if ( pLowerFrm->IsTxtFrm() ) { static_cast(pLowerFrm)->Prepare( PREP_POS_CHGD ); } else if ( pLowerFrm->IsTabFrm() ) { pLowerFrm->InvalidatePrt(); } pLowerFrm->InvalidateObjs( true, false ); pLowerFrm = pLowerFrm->GetNext(); }; } SwLayNotify::~SwLayNotify() { // --> OD 2005-07-29 #i49383# if ( mbFrmDeleted ) { return; } // <-- SwLayoutFrm *pLay = GetLay(); SWRECTFN( pLay ) sal_Bool bNotify = sal_False; if ( pLay->Prt().SSize() != aPrt.SSize() ) { if ( !IsLowersComplete() ) { sal_Bool bInvaPercent; if ( pLay->IsRowFrm() ) { bInvaPercent = sal_True; long nNew = (pLay->Prt().*fnRect->fnGetHeight)(); if( nNew != (aPrt.*fnRect->fnGetHeight)() ) ((SwRowFrm*)pLay)->AdjustCells( nNew, sal_True); if( (pLay->Prt().*fnRect->fnGetWidth)() != (aPrt.*fnRect->fnGetWidth)() ) ((SwRowFrm*)pLay)->AdjustCells( 0, sal_False ); } else { //Proportionale Anpassung der innenliegenden. //1. Wenn der Formatierte kein Fly ist //2. Wenn er keine Spalten enthaelt //3. Wenn der Fly eine feste Hoehe hat und die Spalten in der // Hoehe danebenliegen. //4. niemals bei SectionFrms. sal_Bool bLow; if( pLay->IsFlyFrm() ) { if ( pLay->Lower() ) { bLow = !pLay->Lower()->IsColumnFrm() || (pLay->Lower()->Frm().*fnRect->fnGetHeight)() != (pLay->Prt().*fnRect->fnGetHeight)(); } else bLow = sal_False; } else if( pLay->IsSctFrm() ) { if ( pLay->Lower() ) { if( pLay->Lower()->IsColumnFrm() && pLay->Lower()->GetNext() ) bLow = pLay->Lower()->Frm().Height() != pLay->Prt().Height(); else bLow = pLay->Prt().Width() != aPrt.Width(); } else bLow = sal_False; } else if( pLay->IsFooterFrm() && !pLay->HasFixSize() ) bLow = pLay->Prt().Width() != aPrt.Width(); else bLow = sal_True; bInvaPercent = bLow; if ( bLow ) { pLay->ChgLowersProp( aPrt.SSize() ); } //Wenn die PrtArea gewachsen ist, so ist es moeglich, dass die //Kette der Untergeordneten einen weiteren Frm aufnehmen kann, //mithin muss also der 'moeglicherweise passende' Invalidiert werden. //Das invalidieren lohnt nur, wenn es sich beim mir bzw. meinen //Uppers um eine Moveable-Section handelt. //Die PrtArea ist gewachsen, wenn die Breite oder die Hoehe groesser //geworden ist. if ( (pLay->Prt().Height() > aPrt.Height() || pLay->Prt().Width() > aPrt.Width()) && (pLay->IsMoveable() || pLay->IsFlyFrm()) ) { SwFrm *pTmpFrm = pLay->Lower(); if ( pTmpFrm && pTmpFrm->IsFlowFrm() ) { while ( pTmpFrm->GetNext() ) pTmpFrm = pTmpFrm->GetNext(); pTmpFrm->InvalidateNextPos(); } } } bNotify = sal_True; //TEUER!! aber wie macht man es geschickter? if( bInvaPercent ) pLay->InvaPercentLowers( pLay->Prt().Height() - aPrt.Height() ); } if ( pLay->IsTabFrm() ) //Damit _nur_ der Shatten bei Groessenaenderungen gemalt wird. ((SwTabFrm*)pLay)->SetComplete(); else { const ViewShell *pSh = pLay->getRootFrm()->GetCurrShell(); if( !( pSh && pSh->GetViewOptions()->getBrowseMode() ) || !(pLay->GetType() & (FRM_BODY | FRM_PAGE)) ) //Damit die untergeordneten sauber retouchiert werden. //Problembsp: Flys an den Henkeln packen und verkleinern. //Nicht fuer Body und Page, sonst flackerts beim HTML-Laden. pLay->SetCompletePaint(); } } //Lower benachrichtigen wenn sich die Position veraendert hat. const sal_Bool bPrtPos = POS_DIFF( aPrt, pLay->Prt() ); const sal_Bool bPos = bPrtPos || POS_DIFF( aFrm, pLay->Frm() ); const sal_Bool bSize = pLay->Frm().SSize() != aFrm.SSize(); if ( bPos && pLay->Lower() && !IsLowersComplete() ) pLay->Lower()->InvalidatePos(); if ( bPrtPos ) pLay->SetCompletePaint(); //Nachfolger benachrichtigen wenn sich die SSize geaendert hat. if ( bSize ) { if( pLay->GetNext() ) { if ( pLay->GetNext()->IsLayoutFrm() ) pLay->GetNext()->_InvalidatePos(); else pLay->GetNext()->InvalidatePos(); } else if( pLay->IsSctFrm() ) pLay->InvalidateNextPos(); } if ( !IsLowersComplete() && !(pLay->GetType()&(FRM_FLY|FRM_SECTION) && pLay->Lower() && pLay->Lower()->IsColumnFrm()) && (bPos || bNotify) && !(pLay->GetType() & 0x1823) ) //Tab, Row, FtnCont, Root, Page { // --> OD 2005-03-11 #i44016# - force unlock of position of lower objects. // --> OD 2005-03-30 #i43913# - no unlock of position of objects, // if is a cell frame, and its table frame resp. its parent table // frame is locked. // --> OD 2005-04-15 #i47458# - force unlock of position of lower objects, // only if position of layout frame has changed. bool bUnlockPosOfObjs( bPos ); if ( bUnlockPosOfObjs && pLay->IsCellFrm() ) { SwTabFrm* pTabFrm( pLay->FindTabFrm() ); if ( pTabFrm && ( pTabFrm->IsJoinLocked() || ( pTabFrm->IsFollow() && pTabFrm->FindMaster()->IsJoinLocked() ) ) ) { bUnlockPosOfObjs = false; } } // --> OD 2005-05-18 #i49383# - check for footnote frame, if unlock // of position of lower objects is allowed. else if ( bUnlockPosOfObjs && pLay->IsFtnFrm() ) { bUnlockPosOfObjs = static_cast(pLay)->IsUnlockPosOfLowerObjs(); } // <-- // --> OD 2005-07-29 #i51303# - no unlock of object positions for sections else if ( bUnlockPosOfObjs && pLay->IsSctFrm() ) { bUnlockPosOfObjs = false; } // <-- pLay->NotifyLowerObjs( bUnlockPosOfObjs ); // <-- } if ( bPos && pLay->IsFtnFrm() && pLay->Lower() ) { // OD 2004-05-11 #i28701# ::lcl_InvalidatePosOfLowers( *pLay ); } if( ( bPos || bSize ) && pLay->IsFlyFrm() && ((SwFlyFrm*)pLay)->GetAnchorFrm() && ((SwFlyFrm*)pLay)->GetAnchorFrm()->IsFlyFrm() ) ((SwFlyFrm*)pLay)->AnchorFrm()->InvalidateSize(); } /*************************************************************************/ SwFlyNotify::SwFlyNotify( SwFlyFrm *pFlyFrm ) : SwLayNotify( pFlyFrm ), // --> OD 2004-11-24 #115759# - keep correct page frame - the page frame // the Writer fly frame is currently registered at. pOldPage( pFlyFrm->GetPageFrm() ), // <-- aFrmAndSpace( pFlyFrm->GetObjRectWithSpaces() ) { } /*************************************************************************/ SwFlyNotify::~SwFlyNotify() { // --> OD 2005-07-29 #i49383# if ( mbFrmDeleted ) { return; } // <-- SwFlyFrm *pFly = GetFly(); if ( pFly->IsNotifyBack() ) { ViewShell *pSh = pFly->getRootFrm()->GetCurrShell(); SwViewImp *pImp = pSh ? pSh->Imp() : 0; if ( !pImp || !pImp->IsAction() || !pImp->GetLayAction().IsAgain() ) { //Wenn in der LayAction das IsAgain gesetzt ist kann es sein, //dass die alte Seite inzwischen vernichtet wurde! ::Notify( pFly, pOldPage, aFrmAndSpace, &aPrt ); // --> OD 2004-10-20 #i35640# - additional notify anchor text frame, // if Writer fly frame has changed its page if ( pFly->GetAnchorFrm()->IsTxtFrm() && pFly->GetPageFrm() != pOldPage ) { pFly->AnchorFrm()->Prepare( PREP_FLY_LEAVE ); } // <-- } pFly->ResetNotifyBack(); } //Haben sich Groesse oder Position geaendert, so sollte die View //das wissen. SWRECTFN( pFly ) const bool bPosChgd = POS_DIFF( aFrm, pFly->Frm() ); const bool bFrmChgd = pFly->Frm().SSize() != aFrm.SSize(); const bool bPrtChgd = aPrt != pFly->Prt(); if ( bPosChgd || bFrmChgd || bPrtChgd ) { pFly->NotifyDrawObj(); } if ( bPosChgd && aFrm.Pos().X() != WEIT_WECH ) { // OD 2004-05-10 #i28701# - no direct move of lower Writer fly frames. // reason: New positioning and alignment (e.g. to-paragraph anchored, // but aligned at page) are introduced. // takes care of invalidation of lower // floating screen objects by calling method . if ( pFly->IsFlyAtCntFrm() ) { SwFrm *pNxt = pFly->AnchorFrm()->FindNext(); if ( pNxt ) { pNxt->InvalidatePos(); } } // --> OD 2004-11-05 #i26945# - notify anchor. // Needed for negative positioned Writer fly frames if ( pFly->GetAnchorFrm()->IsTxtFrm() ) { pFly->AnchorFrm()->Prepare( PREP_FLY_LEAVE ); } // <-- } // OD 2004-05-13 #i28701# // --> OD 2005-03-21 #i45180# - no adjustment of layout process flags and // further notifications/invalidations, if format is called by grow/shrink if ( pFly->ConsiderObjWrapInfluenceOnObjPos() && ( !pFly->ISA(SwFlyFreeFrm) || !static_cast(pFly)->IsNoMoveOnCheckClip() ) ) // <-- { // --> OD 2005-09-05 #i54138# - suppress restart of the layout process // on changed frame height. // Note: It doesn't seem to be necessary and can cause layout loops. if ( bPosChgd ) // <-- { // indicate a restart of the layout process pFly->SetRestartLayoutProcess( true ); } else { // lock position pFly->LockPosition(); if ( !pFly->ConsiderForTextWrap() ) { // indicate that object has to be considered for text wrap pFly->SetConsiderForTextWrap( true ); // invalidate 'background' in order to allow its 'background' // to wrap around it. pFly->NotifyBackground( pFly->GetPageFrm(), pFly->GetObjRectWithSpaces(), PREP_FLY_ARRIVE ); // invalidate position of anchor frame in order to force // a re-format of the anchor frame, which also causes a // re-format of the invalid previous frames of the anchor frame. pFly->AnchorFrm()->InvalidatePos(); } } } } /*************************************************************************/ SwCntntNotify::SwCntntNotify( SwCntntFrm *pCntntFrm ) : SwFrmNotify( pCntntFrm ), // OD 08.01.2004 #i11859# mbChkHeightOfLastLine( false ), mnHeightOfLastLine( 0L ), // OD 2004-02-26 #i25029# mbInvalidatePrevPrtArea( false ), mbBordersJoinedWithPrev( false ) { // OD 08.01.2004 #i11859# if ( pCntntFrm->IsTxtFrm() ) { SwTxtFrm* pTxtFrm = static_cast(pCntntFrm); if ( !pTxtFrm->GetTxtNode()->getIDocumentSettingAccess()->get(IDocumentSettingAccess::OLD_LINE_SPACING) ) { const SwAttrSet* pSet = pTxtFrm->GetAttrSet(); const SvxLineSpacingItem &rSpace = pSet->GetLineSpacing(); if ( rSpace.GetInterLineSpaceRule() == SVX_INTER_LINE_SPACE_PROP ) { mbChkHeightOfLastLine = true; mnHeightOfLastLine = pTxtFrm->GetHeightOfLastLine(); } } } } /*************************************************************************/ SwCntntNotify::~SwCntntNotify() { // --> OD 2005-07-29 #i49383# if ( mbFrmDeleted ) { return; } // <-- SwCntntFrm *pCnt = GetCnt(); if ( bSetCompletePaintOnInvalidate ) pCnt->SetCompletePaint(); SWRECTFN( pCnt ) if ( pCnt->IsInTab() && ( POS_DIFF( pCnt->Frm(), aFrm ) || pCnt->Frm().SSize() != aFrm.SSize())) { SwLayoutFrm* pCell = pCnt->GetUpper(); while( !pCell->IsCellFrm() && pCell->GetUpper() ) pCell = pCell->GetUpper(); ASSERT( pCell->IsCellFrm(), "Where's my cell?" ); if ( text::VertOrientation::NONE != pCell->GetFmt()->GetVertOrient().GetVertOrient() ) pCell->InvalidatePrt(); //fuer vertikale Ausrichtung. } // OD 2004-02-26 #i25029# if ( mbInvalidatePrevPrtArea && mbBordersJoinedWithPrev && pCnt->IsTxtFrm() && !pCnt->IsFollow() && !pCnt->GetIndPrev() ) { // determine previous frame SwFrm* pPrevFrm = pCnt->FindPrev(); // skip empty section frames and hidden text frames { while ( pPrevFrm && ( ( pPrevFrm->IsSctFrm() && !static_cast(pPrevFrm)->GetSection() ) || ( pPrevFrm->IsTxtFrm() && static_cast(pPrevFrm)->IsHiddenNow() ) ) ) { pPrevFrm = pPrevFrm->FindPrev(); } } // Invalidate printing area of found previous frame if ( pPrevFrm ) { if ( pPrevFrm->IsSctFrm() ) { if ( pCnt->IsInSct() ) { // Note: found previous frame is a section frame and // is also inside a section. // Thus due to , // had joined its borders/shadow with the // last content of the found section. // Invalidate printing area of last content in found section. SwFrm* pLstCntntOfSctFrm = static_cast(pPrevFrm)->FindLastCntnt(); if ( pLstCntntOfSctFrm ) { pLstCntntOfSctFrm->InvalidatePrt(); } } } else { pPrevFrm->InvalidatePrt(); } } } const bool bFirst = (aFrm.*fnRect->fnGetWidth)() == 0; if ( pCnt->IsNoTxtFrm() ) { //Aktive PlugIn's oder OLE-Objekte sollten etwas von der Veraenderung //mitbekommen, damit sie Ihr Window entsprechend verschieben. ViewShell *pSh = pCnt->getRootFrm()->GetCurrShell(); if ( pSh ) { SwOLENode *pNd; if ( 0 != (pNd = pCnt->GetNode()->GetOLENode()) && (pNd->GetOLEObj().IsOleRef() || pNd->IsOLESizeInvalid()) ) { // --> OD #i117189# const bool bNoTxtFrmPrtAreaChanged = ( aPrt.SSize().Width() != 0 && aPrt.SSize().Height() != 0 ) && aPrt.SSize() != pCnt->Prt().SSize(); // <-- ASSERT( pCnt->IsInFly(), "OLE not in FlyFrm" ); SwFlyFrm *pFly = pCnt->FindFlyFrm(); svt::EmbeddedObjectRef& xObj = pNd->GetOLEObj().GetObject(); SwFEShell *pFESh = 0; ViewShell *pTmp = pSh; do { if ( pTmp->ISA( SwCrsrShell ) ) { pFESh = (SwFEShell*)pTmp; // #108369#: Here used to be the condition if (!bFirst). // I think this should mean "do not call CalcAndSetScale" // if the frame is formatted for the first time. // Unfortunately this is not valid anymore since the // SwNoTxtFrm already gets a width during CalcLowerPreps. // Nevertheless, the indention of !bFirst seemed to be // to assure that the OLE objects have already been notified // if necessary before calling CalcAndSetScale. // So I replaced !bFirst by !IsOLESizeInvalid. There is // one additional problem specific to the word import: // The layout is calculated _before_ calling PrtOLENotify, // and the OLE objects are not invalidated during import. // Therefore I added the condition !IsUpdateExpFld, // have a look at the occurrence of CalcLayout in // uiview/view.cxx. if ( !pNd->IsOLESizeInvalid() && !pSh->GetDoc()->IsUpdateExpFld() ) pFESh->CalcAndSetScale( xObj, &pFly->Prt(), &pFly->Frm(), bNoTxtFrmPrtAreaChanged ); } pTmp = (ViewShell*)pTmp->GetNext(); } while ( pTmp != pSh ); if ( pFESh && pNd->IsOLESizeInvalid() ) { pNd->SetOLESizeInvalid( sal_False ); //TODO/LATER: needs OnDocumentPrinterChanged //xObj->OnDocumentPrinterChanged( pNd->GetDoc()->getPrinter( false ) ); pFESh->CalcAndSetScale( xObj );//Client erzeugen lassen. } } //dito Animierte Grafiken if ( Frm().HasArea() && ((SwNoTxtFrm*)pCnt)->HasAnimation() ) { ((SwNoTxtFrm*)pCnt)->StopAnimation(); pSh->InvalidateWindows( Frm() ); } } } if ( bFirst ) { pCnt->SetRetouche(); //fix(13870) SwDoc *pDoc = pCnt->GetNode()->GetDoc(); if ( pDoc->GetSpzFrmFmts()->Count() && pDoc->DoesContainAtPageObjWithContentAnchor() && !pDoc->IsNewDoc() ) { // If certain import filters for foreign file format import // AT_PAGE anchored objects, the corresponding page number is // typically not known. In this case the content position is // stored at which the anchored object is found in the // imported document. // When this content is formatted it is the time at which // the page is known. Thus, this data can be corrected now. const SwPageFrm* pPage = 0; SwNodeIndex *pIdx = 0; SwSpzFrmFmts *pTbl = pDoc->GetSpzFrmFmts(); for ( sal_uInt16 i = 0; i < pTbl->Count(); ++i ) { SwFrmFmt *pFmt = (*pTbl)[i]; const SwFmtAnchor &rAnch = pFmt->GetAnchor(); if ( FLY_AT_PAGE != rAnch.GetAnchorId() || rAnch.GetCntntAnchor() == 0 ) { continue; } if ( !pIdx ) { pIdx = new SwNodeIndex( *pCnt->GetNode() ); } if ( rAnch.GetCntntAnchor()->nNode == *pIdx ) { ASSERT( false, " - to page anchored object with content position. Please inform OD." ); if ( !pPage ) { pPage = pCnt->FindPageFrm(); } SwFmtAnchor aAnch( rAnch ); aAnch.SetAnchor( 0 ); aAnch.SetPageNum( pPage->GetPhyPageNum() ); pFmt->SetFmtAttr( aAnch ); if ( RES_DRAWFRMFMT != pFmt->Which() ) { pFmt->MakeFrms(); } } } delete pIdx; } } // OD 12.01.2004 #i11859# - invalidate printing area of following frame, // if height of last line has changed. if ( pCnt->IsTxtFrm() && mbChkHeightOfLastLine ) { if ( mnHeightOfLastLine != static_cast(pCnt)->GetHeightOfLastLine() ) { pCnt->InvalidateNextPrtArea(); } } // --> OD 2005-03-07 #i44049# if ( pCnt->IsTxtFrm() && POS_DIFF( aFrm, pCnt->Frm() ) ) { pCnt->InvalidateObjs( true ); } // <-- // --> OD 2005-04-12 #i43255# - move code to invalidate at-character // anchored objects due to a change of its anchor character from // method . if ( pCnt->IsTxtFrm() ) { SwTxtFrm* pMasterFrm = pCnt->IsFollow() ? static_cast(pCnt)->FindMaster() : static_cast(pCnt); if ( pMasterFrm && !pMasterFrm->IsFlyLock() && pMasterFrm->GetDrawObjs() ) { SwSortedObjs* pObjs = pMasterFrm->GetDrawObjs(); for ( sal_uInt32 i = 0; i < pObjs->Count(); ++i ) { SwAnchoredObject* pAnchoredObj = (*pObjs)[i]; if ( pAnchoredObj->GetFrmFmt().GetAnchor().GetAnchorId() == FLY_AT_CHAR ) { pAnchoredObj->CheckCharRectAndTopOfLine( !pMasterFrm->IsEmpty() ); } } } } // <-- } /*************************************************************************/ void AppendObjs( const SwSpzFrmFmts *pTbl, sal_uLong nIndex, SwFrm *pFrm, SwPageFrm *pPage ) { for ( sal_uInt16 i = 0; i < pTbl->Count(); ++i ) { SwFrmFmt *pFmt = (SwFrmFmt*)(*pTbl)[i]; const SwFmtAnchor &rAnch = pFmt->GetAnchor(); if ( rAnch.GetCntntAnchor() && (rAnch.GetCntntAnchor()->nNode.GetIndex() == nIndex) ) { const bool bFlyAtFly = rAnch.GetAnchorId() == FLY_AT_FLY; // LAYER_IMPL //Wird ein Rahmen oder ein SdrObject beschrieben? const bool bSdrObj = RES_DRAWFRMFMT == pFmt->Which(); // OD 23.06.2003 #108784# - append also drawing objects anchored // as character. const bool bDrawObjInCntnt = bSdrObj && (rAnch.GetAnchorId() == FLY_AS_CHAR); if( bFlyAtFly || (rAnch.GetAnchorId() == FLY_AT_PARA) || (rAnch.GetAnchorId() == FLY_AT_CHAR) || bDrawObjInCntnt ) { SdrObject* pSdrObj = 0; if ( bSdrObj && 0 == (pSdrObj = pFmt->FindSdrObject()) ) { ASSERT( !bSdrObj, "DrawObject not found." ); pFmt->GetDoc()->DelFrmFmt( pFmt ); --i; continue; } if ( pSdrObj ) { if ( !pSdrObj->GetPage() ) { pFmt->getIDocumentDrawModelAccess()->GetDrawModel()->GetPage(0)-> InsertObject(pSdrObj, pSdrObj->GetOrdNumDirect()); } SwDrawContact* pNew = static_cast(GetUserCall( pSdrObj )); if ( !pNew->GetAnchorFrm() ) { pFrm->AppendDrawObj( *(pNew->GetAnchoredObj( 0L )) ); } // OD 19.06.2003 #108784# - add 'virtual' drawing object, // if necessary. But control objects have to be excluded. else if ( !::CheckControlLayer( pSdrObj ) && pNew->GetAnchorFrm() != pFrm && !pNew->GetDrawObjectByAnchorFrm( *pFrm ) ) { SwDrawVirtObj* pDrawVirtObj = pNew->AddVirtObj(); pFrm->AppendDrawObj( *(pNew->GetAnchoredObj( pDrawVirtObj )) ); // for repaint, use new ActionChanged() // pDrawVirtObj->SendRepaintBroadcast(); pDrawVirtObj->ActionChanged(); } } else { SwFlyFrm *pFly; if( bFlyAtFly ) pFly = new SwFlyLayFrm( (SwFlyFrmFmt*)pFmt, pFrm, pFrm ); else pFly = new SwFlyAtCntFrm( (SwFlyFrmFmt*)pFmt, pFrm, pFrm ); pFly->Lock(); pFrm->AppendFly( pFly ); pFly->Unlock(); if ( pPage ) ::RegistFlys( pPage, pFly ); } } } } } bool lcl_ObjConnected( SwFrmFmt *pFmt, const SwFrm* pSib ) { SwIterator aIter( *pFmt ); if ( RES_FLYFRMFMT == pFmt->Which() ) { const SwRootFrm* pRoot = pSib ? pSib->getRootFrm() : 0; const SwFlyFrm* pTmpFrm; for( pTmpFrm = aIter.First(); pTmpFrm; pTmpFrm = aIter.Next() ) { if(! pRoot || pRoot == pTmpFrm->getRootFrm() ) return true; } } else { SwDrawContact *pContact = SwIterator::FirstElement(*pFmt); if ( pContact ) return pContact->GetAnchorFrm() != 0; } return false; } /** helper method to determine, if a , which has an object connected, is located in header or footer. OD 23.06.2003 #108784# @author OD */ bool lcl_InHeaderOrFooter( SwFrmFmt& _rFmt ) { bool bRetVal = false; const SwFmtAnchor& rAnch = _rFmt.GetAnchor(); if (rAnch.GetAnchorId() != FLY_AT_PAGE) { bRetVal = _rFmt.GetDoc()->IsInHeaderFooter( rAnch.GetCntntAnchor()->nNode ); } return bRetVal; } void AppendAllObjs( const SwSpzFrmFmts *pTbl, const SwFrm* pSib ) { //Verbinden aller Objekte, die in der SpzTbl beschrieben sind mit dem //Layout. //Wenn sich nix mehr tut hoeren wir auf. Dann koennen noch Formate //uebrigbleiben, weil wir weder zeichengebunde Rahmen verbinden noch //Objecte die in zeichengebundenen verankert sind. SwSpzFrmFmts aCpy( 255, 255 ); aCpy.Insert( pTbl, 0 ); sal_uInt16 nOldCnt = USHRT_MAX; while ( aCpy.Count() && aCpy.Count() != nOldCnt ) { nOldCnt = aCpy.Count(); for ( int i = 0; i < int(aCpy.Count()); ++i ) { SwFrmFmt *pFmt = (SwFrmFmt*)aCpy[ sal_uInt16(i) ]; const SwFmtAnchor &rAnch = pFmt->GetAnchor(); sal_Bool bRemove = sal_False; if ((rAnch.GetAnchorId() == FLY_AT_PAGE) || (rAnch.GetAnchorId() == FLY_AS_CHAR)) { //Seitengebunde sind bereits verankert, zeichengebundene //will ich hier nicht. bRemove = sal_True; } else if ( sal_False == (bRemove = ::lcl_ObjConnected( pFmt, pSib )) || ::lcl_InHeaderOrFooter( *pFmt ) ) { // OD 23.06.2003 #108784# - correction: for objects in header // or footer create frames, in spite of the fact that an connected // objects already exists. //Fuer Flys und DrawObjs nur dann ein MakeFrms rufen wenn noch //keine abhaengigen Existieren, andernfalls, oder wenn das //MakeFrms keine abhaengigen erzeugt, entfernen. pFmt->MakeFrms(); bRemove = ::lcl_ObjConnected( pFmt, pSib ); } if ( bRemove ) { aCpy.Remove( sal_uInt16(i) ); --i; } } } aCpy.Remove( 0, aCpy.Count() ); } /** local method to set 'working' position for newly inserted frames OD 12.08.2003 #i17969# @author OD */ void lcl_SetPos( SwFrm& _rNewFrm, const SwLayoutFrm& _rLayFrm ) { SWRECTFN( (&_rLayFrm) ) (_rNewFrm.Frm().*fnRect->fnSetPos)( (_rLayFrm.Frm().*fnRect->fnGetPos)() ); // move position by one SwTwip in text flow direction in order to get // notifications for a new calculated position after its formatting. if ( bVert ) _rNewFrm.Frm().Pos().X() -= 1; else _rNewFrm.Frm().Pos().Y() += 1; } void MA_FASTCALL _InsertCnt( SwLayoutFrm *pLay, SwDoc *pDoc, sal_uLong nIndex, sal_Bool bPages, sal_uLong nEndIndex, SwFrm *pPrv ) { pDoc->BlockIdling(); SwRootFrm* pLayout = pLay->getRootFrm(); const sal_Bool bOldCallbackActionEnabled = pLayout ? pLayout->IsCallbackActionEnabled() : sal_False; if( bOldCallbackActionEnabled ) pLayout->SetCallbackActionEnabled( sal_False ); //Bei der Erzeugung des Layouts wird bPages mit sal_True uebergeben. Dann //werden schon mal alle x Absaetze neue Seiten angelegt. Bei umbruechen //und/oder Pagedescriptorwechseln werden gleich die entsprechenden Seiten //angelegt. //Vorteil ist, das einerseits schon eine annaehernd realistische Zahl von //Seiten angelegt wird, vor allem aber gibt es nicht mehr eine schier //lange Kette von Absaetzen teuer verschoben werden muss, bis sie sich auf //ertraegliches mass reduziert hat. //Wir gehen mal davon aus, da? 20 Absaetze auf eine Seite passen //Damit es in extremen Faellen nicht gar so heftig rechenen wir je nach //Node noch etwas drauf. //Wenn in der DocStatistik eine brauchebare Seitenzahl angegeben ist //(wird beim Schreiben gepflegt), so wird von dieser Seitenanzahl //ausgegengen. const sal_Bool bStartPercent = bPages && !nEndIndex; SwPageFrm *pPage = pLay->FindPageFrm(); const SwSpzFrmFmts *pTbl = pDoc->GetSpzFrmFmts(); SwFrm *pFrm = 0; sal_Bool bBreakAfter = sal_False; SwActualSection *pActualSection = 0; SwLayHelper *pPageMaker; //Wenn das Layout erzeugt wird (bPages == sal_True) steuern wir den Progress //an. Flys und DrawObjekte werden dann nicht gleich verbunden, dies //passiert erst am Ende der Funktion. if ( bPages ) { // Attention: the SwLayHelper class uses references to the content-, // page-, layout-frame etc. and may change them! pPageMaker = new SwLayHelper( pDoc, pFrm, pPrv, pPage, pLay, pActualSection, bBreakAfter, nIndex, 0 == nEndIndex ); if( bStartPercent ) { const sal_uLong nPageCount = pPageMaker->CalcPageCount(); if( nPageCount ) bObjsDirect = sal_False; } } else pPageMaker = NULL; if( pLay->IsInSct() && ( pLay->IsSctFrm() || pLay->GetUpper() ) ) // Hierdurch werden Frischlinge // abgefangen, deren Flags noch nicht ermittelt werden koennen, // so z.B. beim Einfuegen einer Tabelle { SwSectionFrm* pSct = pLay->FindSctFrm(); // Wenn Inhalt in eine Fussnote eingefuegt wird, die in einem spaltigen // Bereich liegt, so darf der spaltige Bereich nicht aufgebrochen werden. // Nur wenn im Innern der Fussnote ein Bereich liegt, ist dies ein // Kandidat fuer pActualSection. // Gleiches gilt fuer Bereiche in Tabellen, wenn innerhalb einer Tabelle // eingefuegt wird, duerfen nur Bereiche, die ebenfalls im Innern liegen, // aufgebrochen werden. if( ( !pLay->IsInFtn() || pSct->IsInFtn() ) && ( !pLay->IsInTab() || pSct->IsInTab() ) ) { pActualSection = new SwActualSection( 0, pSct, 0 ); ASSERT( !pLay->Lower() || !pLay->Lower()->IsColumnFrm(), "_InsertCnt: Wrong Call" ); } } //If a section is "open", the pActualSection points to an SwActualSection. //If the page breaks, for "open" sections a follow will created. //For nested sections (which have, however, not a nested layout), //the SwActualSection class has a member, which points to an upper(section). //When the "inner" section finishs, the upper will used instead. while( sal_True ) { SwNode *pNd = pDoc->GetNodes()[nIndex]; if ( pNd->IsCntntNode() ) { SwCntntNode* pNode = (SwCntntNode*)pNd; pFrm = pNode->IsTxtNode() ? new SwTxtFrm( (SwTxtNode*)pNode, pLay ) : pNode->MakeFrm( pLay ); if( pPageMaker ) pPageMaker->CheckInsert( nIndex ); pFrm->InsertBehind( pLay, pPrv ); // --> OD 2005-12-01 #i27138# // notify accessibility paragraphs objects about changed // CONTENT_FLOWS_FROM/_TO relation. // Relation CONTENT_FLOWS_FROM for next paragraph will change // and relation CONTENT_FLOWS_TO for previous paragraph will change. if ( pFrm->IsTxtFrm() ) { ViewShell* pViewShell( pFrm->getRootFrm()->GetCurrShell() ); // no notification, if is in construction if ( pViewShell && !pViewShell->IsInConstructor() && pViewShell->GetLayout() && pViewShell->GetLayout()->IsAnyShellAccessible() ) { pViewShell->InvalidateAccessibleParaFlowRelation( dynamic_cast(pFrm->FindNextCnt( true )), dynamic_cast(pFrm->FindPrevCnt( true )) ); // --> OD 2006-08-28 #i68958# // The information flags of the text frame are validated // in methods and . // The information flags have to be invalidated, because // it is possible, that the one of its upper frames // isn't inserted into the layout. pFrm->InvalidateInfFlags(); // <-- } } // <-- // OD 12.08.2003 #i17969# - consider horizontal/vertical layout // for setting position at newly inserted frame lcl_SetPos( *pFrm, *pLay ); pPrv = pFrm; if ( pTbl->Count() && bObjsDirect && !bDontCreateObjects ) AppendObjs( pTbl, nIndex, pFrm, pPage ); } else if ( pNd->IsTableNode() ) { //Sollten wir auf eine Tabelle gestossen sein? SwTableNode *pTblNode = (SwTableNode*)pNd; // #108116# loading may produce table structures that GCLines // needs to clean up. To keep table formulas correct, change // all table formulas to internal (BOXPTR) representation. SwTableFmlUpdate aMsgHnt( &pTblNode->GetTable() ); aMsgHnt.eFlags = TBL_BOXPTR; pDoc->UpdateTblFlds( &aMsgHnt ); pTblNode->GetTable().GCLines(); pFrm = pTblNode->MakeFrm( pLay ); if( pPageMaker ) pPageMaker->CheckInsert( nIndex ); pFrm->InsertBehind( pLay, pPrv ); // --> OD 2005-12-01 #i27138# // notify accessibility paragraphs objects about changed // CONTENT_FLOWS_FROM/_TO relation. // Relation CONTENT_FLOWS_FROM for next paragraph will change // and relation CONTENT_FLOWS_TO for previous paragraph will change. { ViewShell* pViewShell( pFrm->getRootFrm()->GetCurrShell() ); // no notification, if is in construction if ( pViewShell && !pViewShell->IsInConstructor() && pViewShell->GetLayout() && pViewShell->GetLayout()->IsAnyShellAccessible() ) { pViewShell->InvalidateAccessibleParaFlowRelation( dynamic_cast(pFrm->FindNextCnt( true )), dynamic_cast(pFrm->FindPrevCnt( true )) ); } } // <-- if ( bObjsDirect && pTbl->Count() ) ((SwTabFrm*)pFrm)->RegistFlys(); // OD 12.08.2003 #i17969# - consider horizontal/vertical layout // for setting position at newly inserted frame lcl_SetPos( *pFrm, *pLay ); pPrv = pFrm; //Index auf den Endnode der Tabellensection setzen. nIndex = pTblNode->EndOfSectionIndex(); SwTabFrm* pTmpFrm = (SwTabFrm*)pFrm; while ( pTmpFrm ) { pTmpFrm->CheckDirChange(); pTmpFrm = pTmpFrm->IsFollow() ? pTmpFrm->FindMaster() : NULL; } } else if ( pNd->IsSectionNode() ) { SwSectionNode *pNode = (SwSectionNode*)pNd; if( pNode->GetSection().CalcHiddenFlag() ) // ist versteckt, ueberspringe den Bereich nIndex = pNode->EndOfSectionIndex(); else { pFrm = pNode->MakeFrm( pLay ); pActualSection = new SwActualSection( pActualSection, (SwSectionFrm*)pFrm, pNode ); if ( pActualSection->GetUpper() ) { //Hinter den Upper einsetzen, beim EndNode wird der "Follow" //des Uppers erzeugt. SwSectionFrm *pTmp = pActualSection->GetUpper()->GetSectionFrm(); pFrm->InsertBehind( pTmp->GetUpper(), pTmp ); // OD 25.03.2003 #108339# - direct initialization of section // after insertion in the layout static_cast(pFrm)->Init(); } else { pFrm->InsertBehind( pLay, pPrv ); // OD 25.03.2003 #108339# - direct initialization of section // after insertion in the layout static_cast(pFrm)->Init(); // --> FME 2004-09-08 #i33963# // Do not trust the IsInFtn flag. If we are currently // building up a table, the upper of pPrv may be a cell // frame, but the cell frame does not have an upper yet. if( pPrv && 0 != pPrv->ImplFindFtnFrm() ) // <-- { if( pPrv->IsSctFrm() ) pPrv = ((SwSectionFrm*)pPrv)->ContainsCntnt(); if( pPrv && pPrv->IsTxtFrm() ) ((SwTxtFrm*)pPrv)->Prepare( PREP_QUOVADIS, 0, sal_False ); } } // --> OD 2005-12-01 #i27138# // notify accessibility paragraphs objects about changed // CONTENT_FLOWS_FROM/_TO relation. // Relation CONTENT_FLOWS_FROM for next paragraph will change // and relation CONTENT_FLOWS_TO for previous paragraph will change. { ViewShell* pViewShell( pFrm->getRootFrm()->GetCurrShell() ); // no notification, if is in construction if ( pViewShell && !pViewShell->IsInConstructor() && pViewShell->GetLayout() && pViewShell->GetLayout()->IsAnyShellAccessible() ) { pViewShell->InvalidateAccessibleParaFlowRelation( dynamic_cast(pFrm->FindNextCnt( true )), dynamic_cast(pFrm->FindPrevCnt( true )) ); } } // <-- pFrm->CheckDirChange(); // OD 12.08.2003 #i17969# - consider horizontal/vertical layout // for setting position at newly inserted frame lcl_SetPos( *pFrm, *pLay ); // OD 20.11.2002 #105405# - no page, no invalidate. if ( pPage ) { // OD 18.09.2002 #100522# // invalidate page in order to force format and paint of // inserted section frame pFrm->InvalidatePage( pPage ); // FME 10.11.2003 #112243# // Invalidate fly content flag: if ( pFrm->IsInFly() ) pPage->InvalidateFlyCntnt(); // OD 14.11.2002 #104684# - invalidate page content in order to // force format and paint of section content. pPage->InvalidateCntnt(); } pLay = (SwLayoutFrm*)pFrm; if ( pLay->Lower() && pLay->Lower()->IsLayoutFrm() ) pLay = pLay->GetNextLayoutLeaf(); pPrv = 0; } } else if ( pNd->IsEndNode() && pNd->StartOfSectionNode()->IsSectionNode() ) { ASSERT( pActualSection, "Sectionende ohne Anfang?" ); ASSERT( pActualSection->GetSectionNode() == pNd->StartOfSectionNode(), "Sectionende mit falschen Start Node?" ); //Section schliessen, ggf. die umgebende Section wieder //aktivieren. SwActualSection *pTmp = pActualSection->GetUpper(); delete pActualSection; pLay = pLay->FindSctFrm(); if ( 0 != (pActualSection = pTmp) ) { //Koennte noch sein, das der letzte SectionFrm leer geblieben //ist. Dann ist es jetzt an der Zeit ihn zu entfernen. if ( !pLay->ContainsCntnt() ) { SwFrm *pTmpFrm = pLay; pLay = pTmpFrm->GetUpper(); pPrv = pTmpFrm->GetPrev(); pTmpFrm->Remove(); delete pTmpFrm; } else { pPrv = pLay; pLay = pLay->GetUpper(); } // new section frame pFrm = pActualSection->GetSectionNode()->MakeFrm( pLay ); pFrm->InsertBehind( pLay, pPrv ); static_cast(pFrm)->Init(); // OD 12.08.2003 #i17969# - consider horizontal/vertical layout // for setting position at newly inserted frame lcl_SetPos( *pFrm, *pLay ); SwSectionFrm* pOuterSectionFrm = pActualSection->GetSectionFrm(); // a follow has to be appended to the new section frame SwSectionFrm* pFollow = pOuterSectionFrm->GetFollow(); if ( pFollow ) { pOuterSectionFrm->SetFollow( NULL ); pOuterSectionFrm->InvalidateSize(); ((SwSectionFrm*)pFrm)->SetFollow( pFollow ); } // Wir wollen keine leeren Teile zuruecklassen if( ! pOuterSectionFrm->IsColLocked() && ! pOuterSectionFrm->ContainsCntnt() ) { pOuterSectionFrm->DelEmpty( sal_True ); delete pOuterSectionFrm; } pActualSection->SetSectionFrm( (SwSectionFrm*)pFrm ); pLay = (SwLayoutFrm*)pFrm; if ( pLay->Lower() && pLay->Lower()->IsLayoutFrm() ) pLay = pLay->GetNextLayoutLeaf(); pPrv = 0; } else { //Nix mehr mit Sections, es geht direkt hinter dem SectionFrame //weiter. pPrv = pLay; pLay = pLay->GetUpper(); } } else if( pNd->IsStartNode() && SwFlyStartNode == ((SwStartNode*)pNd)->GetStartNodeType() ) { if ( pTbl->Count() && bObjsDirect && !bDontCreateObjects ) { SwFlyFrm* pFly = pLay->FindFlyFrm(); if( pFly ) AppendObjs( pTbl, nIndex, pFly, pPage ); } } else // Weder Cntnt noch Tabelle noch Section, // also muessen wir fertig sein. break; ++nIndex; // Der Endnode wird nicht mehr mitgenommen, es muss vom // Aufrufenden (Section/MakeFrms()) sichergestellt sein, dass das Ende // des Bereichs vor dem EndIndex liegt! if ( nEndIndex && nIndex >= nEndIndex ) break; } if ( pActualSection ) { //Kann passieren, dass noch eine leere (Follow-)Section uebrig geblieben ist. if ( !(pLay = pActualSection->GetSectionFrm())->ContainsCntnt() ) { pLay->Remove(); delete pLay; } delete pActualSection; } if ( bPages ) //Jetzt noch die Flys verbinden lassen. { if ( !bDontCreateObjects ) AppendAllObjs( pTbl, pLayout ); bObjsDirect = sal_True; } if( pPageMaker ) { pPageMaker->CheckFlyCache( pPage ); delete pPageMaker; if( pDoc->GetLayoutCache() ) { #ifdef DBG_UTIL #if OSL_DEBUG_LEVEL > 1 pDoc->GetLayoutCache()->CompareLayout( *pDoc ); #endif #endif pDoc->GetLayoutCache()->ClearImpl(); } } pDoc->UnblockIdling(); if( bOldCallbackActionEnabled ) pLayout->SetCallbackActionEnabled( bOldCallbackActionEnabled ); } void MakeFrms( SwDoc *pDoc, const SwNodeIndex &rSttIdx, const SwNodeIndex &rEndIdx ) { bObjsDirect = sal_False; SwNodeIndex aTmp( rSttIdx ); sal_uLong nEndIdx = rEndIdx.GetIndex(); SwNode* pNd = pDoc->GetNodes().FindPrvNxtFrmNode( aTmp, pDoc->GetNodes()[ nEndIdx-1 ]); if ( pNd ) { sal_Bool bApres = aTmp < rSttIdx; SwNode2Layout aNode2Layout( *pNd, rSttIdx.GetIndex() ); SwFrm* pFrm; while( 0 != (pFrm = aNode2Layout.NextFrm()) ) { SwLayoutFrm *pUpper = pFrm->GetUpper(); SwFtnFrm* pFtnFrm = pUpper->FindFtnFrm(); sal_Bool bOldLock, bOldFtn; if( pFtnFrm ) { bOldFtn = pFtnFrm->IsColLocked(); pFtnFrm->ColLock(); } else bOldFtn = sal_True; SwSectionFrm* pSct = pUpper->FindSctFrm(); // Es sind innerhalb von Fussnoten nur die Bereiche interessant, // die in den Fussnoten liegen, nicht etwa die (spaltigen) Bereiche, // in denen die Fussnoten(Container) liegen. // #109767# Table frame is in section, insert section in cell frame. if( pSct && ((pFtnFrm && !pSct->IsInFtn()) || pUpper->IsCellFrm()) ) pSct = NULL; if( pSct ) { // damit der SectionFrm nicht zerstoert wird durch pTmp->MoveFwd() bOldLock = pSct->IsColLocked(); pSct->ColLock(); } else bOldLock = sal_True; // Wenn pFrm sich nicht bewegen kann, koennen wir auch niemanden // auf die naechste Seite schieben. Innerhalb eines Rahmens auch // nicht ( in der 1. Spalte eines Rahmens waere pFrm Moveable()! ) // Auch in spaltigen Bereichen in Tabellen waere pFrm Moveable. sal_Bool bMoveNext = nEndIdx - rSttIdx.GetIndex() > 120; sal_Bool bAllowMove = !pFrm->IsInFly() && pFrm->IsMoveable() && (!pFrm->IsInTab() || pFrm->IsTabFrm() ); if ( bMoveNext && bAllowMove ) { SwFrm *pMove = pFrm; SwFrm *pPrev = pFrm->GetPrev(); SwFlowFrm *pTmp = SwFlowFrm::CastFlowFrm( pMove ); ASSERT( pTmp, "Missing FlowFrm" ); if ( bApres ) { // Wir wollen, dass der Rest der Seite leer ist, d.h. // der naechste muss auf die naechste Seite wandern. // Dieser kann auch in der naechsten Spalte stehen! ASSERT( !pTmp->HasFollow(), "Follows forbidden" ); pPrev = pFrm; // Wenn unser umgebender SectionFrm einen Next besitzt, // so soll dieser ebenfalls gemoved werden! pMove = pFrm->GetIndNext(); SwColumnFrm* pCol = (SwColumnFrm*)pFrm->FindColFrm(); if( pCol ) pCol = (SwColumnFrm*)pCol->GetNext(); do { if( pCol && !pMove ) { // Bisher haben wir keinen Nachfolger gefunden // jetzt gucken wir in die naechste Spalte pMove = pCol->ContainsAny(); if( pCol->GetNext() ) pCol = (SwColumnFrm*)pCol->GetNext(); else if( pCol->IsInSct() ) { // Wenn es keine naechste Spalte gibt, wir aber // innerhalb eines spaltigen Bereichs sind, // koennte es noch ausserhalb des Bereich // (Seiten-)Spalten geben pCol = (SwColumnFrm*)pCol->FindSctFrm()->FindColFrm(); if( pCol ) pCol = (SwColumnFrm*)pCol->GetNext(); } else pCol = NULL; } // Falls hier verschrottete SectionFrms herumgammeln, // muessen diese uebersprungen werden. while( pMove && pMove->IsSctFrm() && !((SwSectionFrm*)pMove)->GetSection() ) pMove = pMove->GetNext(); } while( !pMove && pCol ); if( pMove ) { if ( pMove->IsCntntFrm() ) pTmp = (SwCntntFrm*)pMove; else if ( pMove->IsTabFrm() ) pTmp = (SwTabFrm*)pMove; else if ( pMove->IsSctFrm() ) { pMove = ((SwSectionFrm*)pMove)->ContainsAny(); if( pMove ) pTmp = SwFlowFrm::CastFlowFrm( pMove ); else pTmp = NULL; } } else pTmp = 0; } else { ASSERT( !pTmp->IsFollow(), "Follows really forbidden" ); // Bei Bereichen muss natuerlich der Inhalt auf die Reise // geschickt werden. if( pMove->IsSctFrm() ) { while( pMove && pMove->IsSctFrm() && !((SwSectionFrm*)pMove)->GetSection() ) pMove = pMove->GetNext(); if( pMove && pMove->IsSctFrm() ) pMove = ((SwSectionFrm*)pMove)->ContainsAny(); if( pMove ) pTmp = SwFlowFrm::CastFlowFrm( pMove ); else pTmp = NULL; } } if( pTmp ) { SwFrm* pOldUp = pTmp->GetFrm()->GetUpper(); // MoveFwd==sal_True bedeutet, dass wir auf der gleichen // Seite geblieben sind, wir wollen aber die Seite wechseln, // sofern dies moeglich ist sal_Bool bTmpOldLock = pTmp->IsJoinLocked(); pTmp->LockJoin(); while( pTmp->MoveFwd( sal_True, sal_False, sal_True ) ) { if( pOldUp == pTmp->GetFrm()->GetUpper() ) break; pOldUp = pTmp->GetFrm()->GetUpper(); } if( !bTmpOldLock ) pTmp->UnlockJoin(); } ::_InsertCnt( pUpper, pDoc, rSttIdx.GetIndex(), pFrm->IsInDocBody(), nEndIdx, pPrev ); } else { sal_Bool bSplit; SwFrm* pPrv = bApres ? pFrm : pFrm->GetPrev(); // Wenn in einen SectionFrm ein anderer eingefuegt wird, // muss dieser aufgebrochen werden if( pSct && rSttIdx.GetNode().IsSectionNode() ) { bSplit = pSct->SplitSect( pFrm, bApres ); // Wenn pSct nicht aufgespalten werden konnte if( !bSplit && !bApres ) { pUpper = pSct->GetUpper(); pPrv = pSct->GetPrev(); } } else bSplit = sal_False; ::_InsertCnt( pUpper, pDoc, rSttIdx.GetIndex(), sal_False, nEndIdx, pPrv ); // OD 23.06.2003 #108784# - correction: append objects doesn't // depend on value of if( !bDontCreateObjects ) { const SwSpzFrmFmts *pTbl = pDoc->GetSpzFrmFmts(); if( pTbl->Count() ) AppendAllObjs( pTbl, pUpper ); } // Wenn nichts eingefuegt wurde, z.B. ein ausgeblendeter Bereich, // muss das Splitten rueckgaengig gemacht werden if( bSplit && pSct && pSct->GetNext() && pSct->GetNext()->IsSctFrm() ) pSct->MergeNext( (SwSectionFrm*)pSct->GetNext() ); if( pFrm->IsInFly() ) pFrm->FindFlyFrm()->_Invalidate(); if( pFrm->IsInTab() ) pFrm->InvalidateSize(); } SwPageFrm *pPage = pUpper->FindPageFrm(); SwFrm::CheckPageDescs( pPage, sal_False ); if( !bOldFtn ) pFtnFrm->ColUnlock(); if( !bOldLock ) { pSct->ColUnlock(); // Zum Beispiel beim Einfuegen von gelinkten Bereichen, // die wiederum Bereiche enthalten, kann pSct jetzt leer sein // und damit ruhig zerstoert werden. if( !pSct->ContainsCntnt() ) { pSct->DelEmpty( sal_True ); pUpper->getRootFrm()->RemoveFromList( pSct ); delete pSct; } } } } bObjsDirect = sal_True; } /*************************************************************************/ SwBorderAttrs::SwBorderAttrs( const SwModify *pMod, const SwFrm *pConstructor ) : SwCacheObj( pMod ), rAttrSet( pConstructor->IsCntntFrm() ? ((SwCntntFrm*)pConstructor)->GetNode()->GetSwAttrSet() : ((SwLayoutFrm*)pConstructor)->GetFmt()->GetAttrSet() ), rUL ( rAttrSet.GetULSpace() ), // --> OD 2008-12-04 #i96772# // LRSpaceItem is copied due to the possibility that it is adjusted - see below rLR ( rAttrSet.GetLRSpace() ), // <-- rBox ( rAttrSet.GetBox() ), rShadow ( rAttrSet.GetShadow() ), aFrmSize( rAttrSet.GetFrmSize().GetSize() ) { // --> OD 2008-12-02 #i96772# const SwTxtFrm* pTxtFrm = dynamic_cast(pConstructor); if ( pTxtFrm ) { pTxtFrm->GetTxtNode()->ClearLRSpaceItemDueToListLevelIndents( rLR ); } //Achtung: Die USHORTs fuer die gecache'ten Werte werden absichtlich //nicht initialisiert! //Muessen alle einmal berechnet werden: bTopLine = bBottomLine = bLeftLine = bRightLine = bTop = bBottom = bLine = sal_True; bCacheGetLine = bCachedGetTopLine = bCachedGetBottomLine = sal_False; // OD 21.05.2003 #108789# - init cache status for values // and , which aren't initialized by default. bCachedJoinedWithPrev = sal_False; bCachedJoinedWithNext = sal_False; bBorderDist = 0 != (pConstructor->GetType() & (FRM_CELL)); } SwBorderAttrs::~SwBorderAttrs() { ((SwModify*)pOwner)->SetInCache( sal_False ); } /************************************************************************* |* |* SwBorderAttrs::CalcTop(), CalcBottom(), CalcLeft(), CalcRight() |* |* Beschreibung Die Calc-Methoden errechnen zusaetzlich zu den |* von den Attributen vorgegebenen Groessen einen Sicherheitsabstand. |* der Sicherheitsabstand wird nur einkalkuliert, wenn Umrandung und/oder |* Schatten im Spiel sind; er soll vermeiden, dass aufgrund der |* groben physikalischen Gegebenheiten Raender usw. uebermalt werden. |* |*************************************************************************/ void SwBorderAttrs::_CalcTop() { nTop = CalcTopLine() + rUL.GetUpper(); bTop = sal_False; } void SwBorderAttrs::_CalcBottom() { nBottom = CalcBottomLine() + rUL.GetLower(); bBottom = sal_False; } long SwBorderAttrs::CalcRight( const SwFrm* pCaller ) const { long nRight; // OD 23.01.2003 #106895# - for cell frame in R2L text direction the left // and right border are painted on the right respectively left. if ( pCaller->IsCellFrm() && pCaller->IsRightToLeft() ) nRight = CalcLeftLine(); else nRight = CalcRightLine(); // for paragraphs, "left" is "before text" and "right" is "after text" if ( pCaller->IsTxtFrm() && pCaller->IsRightToLeft() ) nRight += rLR.GetLeft(); else nRight += rLR.GetRight(); // --> OD 2008-01-21 #newlistlevelattrs# // correction: retrieve left margin for numbering in R2L-layout if ( pCaller->IsTxtFrm() && pCaller->IsRightToLeft() ) { nRight += ((SwTxtFrm*)pCaller)->GetTxtNode()->GetLeftMarginWithNum(); } // <-- return nRight; } long SwBorderAttrs::CalcLeft( const SwFrm *pCaller ) const { long nLeft; // OD 23.01.2003 #106895# - for cell frame in R2L text direction the left // and right border are painted on the right respectively left. if ( pCaller->IsCellFrm() && pCaller->IsRightToLeft() ) nLeft = CalcRightLine(); else nLeft = CalcLeftLine(); // for paragraphs, "left" is "before text" and "right" is "after text" if ( pCaller->IsTxtFrm() && pCaller->IsRightToLeft() ) nLeft += rLR.GetRight(); else nLeft += rLR.GetLeft(); // --> OD 2008-01-21 #newlistlevelattrs# // correction: do not retrieve left margin for numbering in R2L-layout // if ( pCaller->IsTxtFrm() ) if ( pCaller->IsTxtFrm() && !pCaller->IsRightToLeft() ) // <-- { nLeft += ((SwTxtFrm*)pCaller)->GetTxtNode()->GetLeftMarginWithNum(); } return nLeft; } /************************************************************************* |* |* SwBorderAttrs::CalcTopLine(), CalcBottomLine(), |* CalcLeftLine(), CalcRightLine() |* |* Beschreibung Berechnung der Groessen fuer Umrandung und Schatten. |* Es kann auch ohne Linien ein Abstand erwuenscht sein, |* dieser wird dann nicht vom Attribut sondern hier |* beruecksichtigt (bBorderDist, z.B. fuer Zellen). |* |*************************************************************************/ void SwBorderAttrs::_CalcTopLine() { nTopLine = (bBorderDist && !rBox.GetTop()) ? rBox.GetDistance (BOX_LINE_TOP) : rBox.CalcLineSpace(BOX_LINE_TOP); nTopLine = nTopLine + rShadow.CalcShadowSpace(SHADOW_TOP); bTopLine = sal_False; } void SwBorderAttrs::_CalcBottomLine() { nBottomLine = (bBorderDist && !rBox.GetBottom()) ? rBox.GetDistance (BOX_LINE_BOTTOM) : rBox.CalcLineSpace(BOX_LINE_BOTTOM); nBottomLine = nBottomLine + rShadow.CalcShadowSpace(SHADOW_BOTTOM); bBottomLine = sal_False; } void SwBorderAttrs::_CalcLeftLine() { nLeftLine = (bBorderDist && !rBox.GetLeft()) ? rBox.GetDistance (BOX_LINE_LEFT) : rBox.CalcLineSpace(BOX_LINE_LEFT); nLeftLine = nLeftLine + rShadow.CalcShadowSpace(SHADOW_LEFT); bLeftLine = sal_False; } void SwBorderAttrs::_CalcRightLine() { nRightLine = (bBorderDist && !rBox.GetRight()) ? rBox.GetDistance (BOX_LINE_RIGHT) : rBox.CalcLineSpace(BOX_LINE_RIGHT); nRightLine = nRightLine + rShadow.CalcShadowSpace(SHADOW_RIGHT); bRightLine = sal_False; } /*************************************************************************/ void SwBorderAttrs::_IsLine() { bIsLine = rBox.GetTop() || rBox.GetBottom() || rBox.GetLeft()|| rBox.GetRight(); bLine = sal_False; } /************************************************************************* |* |* SwBorderAttrs::CmpLeftRightLine(), IsTopLine(), IsBottomLine() |* |* Die Umrandungen benachbarter Absaetze werden nach folgendem |* Algorithmus zusammengefasst: |* |* 1. Die Umrandung oben faellt weg, wenn der Vorgaenger dieselbe |* Umrandung oben aufweist und 3. Zutrifft. |* Zusaetzlich muss der Absatz mindestens rechts oder links oder |* unten eine Umrandung haben. |* 2. Die Umrandung unten faellt weg, wenn der Nachfolger dieselbe |* Umrandung untern aufweist und 3. Zustrifft. |* Zusaetzlich muss der Absatz mindestens rechts oder links oder |* oben eine Umrandung haben. |* 3. Die Umrandungen links und rechts vor Vorgaenger bzw. Nachfolger |* sind identisch. |* |*************************************************************************/ inline int CmpLines( const SvxBorderLine *pL1, const SvxBorderLine *pL2 ) { return ( ((pL1 && pL2) && (*pL1 == *pL2)) || (!pL1 && !pL2) ); } // OD 21.05.2003 #108789# - change name of 1st parameter - "rAttrs" -> "rCmpAttrs" // OD 21.05.2003 #108789# - compare and // instead of only the right LR-spacing, because R2L-layout has to be // considered. sal_Bool SwBorderAttrs::CmpLeftRight( const SwBorderAttrs &rCmpAttrs, const SwFrm *pCaller, const SwFrm *pCmp ) const { return ( CmpLines( rCmpAttrs.GetBox().GetLeft(), GetBox().GetLeft() ) && CmpLines( rCmpAttrs.GetBox().GetRight(),GetBox().GetRight() ) && CalcLeft( pCaller ) == rCmpAttrs.CalcLeft( pCmp ) && // OD 21.05.2003 #108789# - compare with . CalcRight( pCaller ) == rCmpAttrs.CalcRight( pCmp ) ); } sal_Bool SwBorderAttrs::_JoinWithCmp( const SwFrm& _rCallerFrm, const SwFrm& _rCmpFrm ) const { sal_Bool bReturnVal = sal_False; SwBorderAttrAccess aCmpAccess( SwFrm::GetCache(), &_rCmpFrm ); const SwBorderAttrs &rCmpAttrs = *aCmpAccess.Get(); if ( rShadow == rCmpAttrs.GetShadow() && CmpLines( rBox.GetTop(), rCmpAttrs.GetBox().GetTop() ) && CmpLines( rBox.GetBottom(), rCmpAttrs.GetBox().GetBottom() ) && CmpLeftRight( rCmpAttrs, &_rCallerFrm, &_rCmpFrm ) ) { bReturnVal = sal_True; } return bReturnVal; } // OD 21.05.2003 #108789# - method to determine, if borders are joined with // previous frame. Calculated value saved in cached value // OD 2004-02-26 #i25029# - add 2nd parameter <_pPrevFrm> void SwBorderAttrs::_CalcJoinedWithPrev( const SwFrm& _rFrm, const SwFrm* _pPrevFrm ) { // set default bJoinedWithPrev = sal_False; if ( _rFrm.IsTxtFrm() ) { // text frame can potentially join with previous text frame, if // corresponding attribute set is set at previous text frame. // OD 2004-02-26 #i25029# - If parameter <_pPrevFrm> is set, take this // one as previous frame. const SwFrm* pPrevFrm = _pPrevFrm ? _pPrevFrm : _rFrm.GetPrev(); // OD 2004-02-13 #i25029# - skip hidden text frames. while ( pPrevFrm && pPrevFrm->IsTxtFrm() && static_cast(pPrevFrm)->IsHiddenNow() ) { pPrevFrm = pPrevFrm->GetPrev(); } if ( pPrevFrm && pPrevFrm->IsTxtFrm() && pPrevFrm->GetAttrSet()->GetParaConnectBorder().GetValue() ) { bJoinedWithPrev = _JoinWithCmp( _rFrm, *(pPrevFrm) ); } } // valid cache status, if demanded // OD 2004-02-26 #i25029# - Do not validate cache, if parameter <_pPrevFrm> // is set. bCachedJoinedWithPrev = bCacheGetLine && !_pPrevFrm; } // OD 21.05.2003 #108789# - method to determine, if borders are joined with // next frame. Calculated value saved in cached value void SwBorderAttrs::_CalcJoinedWithNext( const SwFrm& _rFrm ) { // set default bJoinedWithNext = sal_False; if ( _rFrm.IsTxtFrm() ) { // text frame can potentially join with next text frame, if // corresponding attribute set is set at current text frame. // OD 2004-02-13 #i25029# - get next frame, but skip hidden text frames. const SwFrm* pNextFrm = _rFrm.GetNext(); while ( pNextFrm && pNextFrm->IsTxtFrm() && static_cast(pNextFrm)->IsHiddenNow() ) { pNextFrm = pNextFrm->GetNext(); } if ( pNextFrm && pNextFrm->IsTxtFrm() && _rFrm.GetAttrSet()->GetParaConnectBorder().GetValue() ) { bJoinedWithNext = _JoinWithCmp( _rFrm, *(pNextFrm) ); } } // valid cache status, if demanded bCachedJoinedWithNext = bCacheGetLine; } // OD 21.05.2003 #108789# - accessor for cached values // OD 2004-02-26 #i25029# - add 2nd parameter <_pPrevFrm>, which is passed to // method <_CalcJoindWithPrev(..)>. sal_Bool SwBorderAttrs::JoinedWithPrev( const SwFrm& _rFrm, const SwFrm* _pPrevFrm ) const { if ( !bCachedJoinedWithPrev || _pPrevFrm ) { // OD 2004-02-26 #i25029# - pass <_pPrevFrm> as 2nd parameter const_cast(this)->_CalcJoinedWithPrev( _rFrm, _pPrevFrm ); } return bJoinedWithPrev; } sal_Bool SwBorderAttrs::JoinedWithNext( const SwFrm& _rFrm ) const { if ( !bCachedJoinedWithNext ) { const_cast(this)->_CalcJoinedWithNext( _rFrm ); } return bJoinedWithNext; } // OD 2004-02-26 #i25029# - added 2nd parameter <_pPrevFrm>, which is passed to // method void SwBorderAttrs::_GetTopLine( const SwFrm& _rFrm, const SwFrm* _pPrevFrm ) { sal_uInt16 nRet = CalcTopLine(); // OD 21.05.2003 #108789# - use new method // OD 2004-02-26 #i25029# - add 2nd parameter if ( JoinedWithPrev( _rFrm, _pPrevFrm ) ) { nRet = 0; } bCachedGetTopLine = bCacheGetLine; nGetTopLine = nRet; } void SwBorderAttrs::_GetBottomLine( const SwFrm& _rFrm ) { sal_uInt16 nRet = CalcBottomLine(); // OD 21.05.2003 #108789# - use new method if ( JoinedWithNext( _rFrm ) ) { nRet = 0; } bCachedGetBottomLine = bCacheGetLine; nGetBottomLine = nRet; } /*************************************************************************/ SwBorderAttrAccess::SwBorderAttrAccess( SwCache &rCach, const SwFrm *pFrm ) : SwCacheAccess( rCach, (pFrm->IsCntntFrm() ? (void*)((SwCntntFrm*)pFrm)->GetNode() : (void*)((SwLayoutFrm*)pFrm)->GetFmt()), (sal_Bool)(pFrm->IsCntntFrm() ? ((SwModify*)((SwCntntFrm*)pFrm)->GetNode())->IsInCache() : ((SwModify*)((SwLayoutFrm*)pFrm)->GetFmt())->IsInCache()) ), pConstructor( pFrm ) { } /*************************************************************************/ SwCacheObj *SwBorderAttrAccess::NewObj() { ((SwModify*)pOwner)->SetInCache( sal_True ); return new SwBorderAttrs( (SwModify*)pOwner, pConstructor ); } SwBorderAttrs *SwBorderAttrAccess::Get() { return (SwBorderAttrs*)SwCacheAccess::Get(); } /*************************************************************************/ SwOrderIter::SwOrderIter( const SwPageFrm *pPg, sal_Bool bFlys ) : pPage( pPg ), pCurrent( 0 ), bFlysOnly( bFlys ) { } /*************************************************************************/ const SdrObject *SwOrderIter::Top() { pCurrent = 0; if ( pPage->GetSortedObjs() ) { sal_uInt32 nTopOrd = 0; const SwSortedObjs *pObjs = pPage->GetSortedObjs(); if ( pObjs->Count() ) { (*pObjs)[0]->GetDrawObj()->GetOrdNum(); //Aktualisieren erzwingen! for ( sal_uInt16 i = 0; i < pObjs->Count(); ++i ) { const SdrObject* pObj = (*pObjs)[i]->GetDrawObj(); if ( bFlysOnly && !pObj->ISA(SwVirtFlyDrawObj) ) continue; sal_uInt32 nTmp = pObj->GetOrdNumDirect(); if ( nTmp >= nTopOrd ) { nTopOrd = nTmp; pCurrent = pObj; } } } } return pCurrent; } /*************************************************************************/ const SdrObject *SwOrderIter::Bottom() { pCurrent = 0; if ( pPage->GetSortedObjs() ) { sal_uInt32 nBotOrd = USHRT_MAX; const SwSortedObjs *pObjs = pPage->GetSortedObjs(); if ( pObjs->Count() ) { (*pObjs)[0]->GetDrawObj()->GetOrdNum(); //Aktualisieren erzwingen! for ( sal_uInt16 i = 0; i < pObjs->Count(); ++i ) { const SdrObject* pObj = (*pObjs)[i]->GetDrawObj(); if ( bFlysOnly && !pObj->ISA(SwVirtFlyDrawObj) ) continue; sal_uInt32 nTmp = pObj->GetOrdNumDirect(); if ( nTmp < nBotOrd ) { nBotOrd = nTmp; pCurrent = pObj; } } } } return pCurrent; } /*************************************************************************/ const SdrObject *SwOrderIter::Next() { const sal_uInt32 nCurOrd = pCurrent ? pCurrent->GetOrdNumDirect() : 0; pCurrent = 0; if ( pPage->GetSortedObjs() ) { sal_uInt32 nOrd = USHRT_MAX; const SwSortedObjs *pObjs = pPage->GetSortedObjs(); if ( pObjs->Count() ) { (*pObjs)[0]->GetDrawObj()->GetOrdNum(); //Aktualisieren erzwingen! for ( sal_uInt16 i = 0; i < pObjs->Count(); ++i ) { const SdrObject* pObj = (*pObjs)[i]->GetDrawObj(); if ( bFlysOnly && !pObj->ISA(SwVirtFlyDrawObj) ) continue; sal_uInt32 nTmp = pObj->GetOrdNumDirect(); if ( nTmp > nCurOrd && nTmp < nOrd ) { nOrd = nTmp; pCurrent = pObj; } } } } return pCurrent; } /*************************************************************************/ const SdrObject *SwOrderIter::Prev() { const sal_uInt32 nCurOrd = pCurrent ? pCurrent->GetOrdNumDirect() : 0; pCurrent = 0; if ( pPage->GetSortedObjs() ) { sal_uInt32 nOrd = 0; const SwSortedObjs *pObjs = pPage->GetSortedObjs(); if ( pObjs->Count() ) { (*pObjs)[0]->GetDrawObj()->GetOrdNum(); //Aktualisieren erzwingen! for ( sal_uInt16 i = 0; i < pObjs->Count(); ++i ) { const SdrObject* pObj = (*pObjs)[i]->GetDrawObj(); if ( bFlysOnly && !pObj->ISA(SwVirtFlyDrawObj) ) continue; sal_uInt32 nTmp = pObj->GetOrdNumDirect(); if ( nTmp < nCurOrd && nTmp >= nOrd ) { nOrd = nTmp; pCurrent = pObj; } } } } return pCurrent; } /*************************************************************************/ //Unterstruktur eines LayoutFrms fuer eine Aktion aufheben und wieder //restaurieren. //Neuer Algorithmus: Es ist unuetz jeden Nachbarn einzeln zu betrachten und //die Pointer sauber zu setzen (Upper, Nachbarn, usw.) //Es reicht vollkommen jeweils eine Einzelkette zu loesen, und mit dem //Letzen der Einzelkette nachzuschauen ob noch eine weitere Kette //angeheangt werden muss. Es brauchen nur die Pointer korrigiert werden, //die zur Verkettung notwendig sind. So koennen Beipspielsweise die Pointer //auf die Upper auf den alten Uppern stehenbleiben. Korrigiert werden die //Pointer dann im RestoreCntnt. Zwischenzeitlich ist sowieso jeder Zugriff //verboten. //Unterwegs werden die Flys bei der Seite abgemeldet. // --> OD 2004-11-29 #115759# - 'remove' also drawing object from page and // at-fly anchored objects from page void MA_FASTCALL lcl_RemoveObjsFromPage( SwFrm* _pFrm ) { ASSERT( _pFrm->GetDrawObjs(), "Keine DrawObjs fuer lcl_RemoveFlysFromPage." ); SwSortedObjs &rObjs = *_pFrm->GetDrawObjs(); for ( sal_uInt16 i = 0; i < rObjs.Count(); ++i ) { SwAnchoredObject* pObj = rObjs[i]; // --> OD 2004-11-29 #115759# - reset member, at which the anchored // object orients its vertical position pObj->ClearVertPosOrientFrm(); // <-- // --> OD 2005-03-03 #i43913# pObj->ResetLayoutProcessBools(); // <-- // --> OD 2004-11-29 #115759# - remove also lower objects of as-character // anchored Writer fly frames from page if ( pObj->ISA(SwFlyFrm) ) { SwFlyFrm* pFlyFrm = static_cast(pObj); // --> OD 2004-11-29 #115759# - remove also direct lowers of Writer // fly frame from page if ( pFlyFrm->GetDrawObjs() ) { ::lcl_RemoveObjsFromPage( pFlyFrm ); } // <-- SwCntntFrm* pCnt = pFlyFrm->ContainsCntnt(); while ( pCnt ) { if ( pCnt->GetDrawObjs() ) ::lcl_RemoveObjsFromPage( pCnt ); pCnt = pCnt->GetNextCntntFrm(); } if ( pFlyFrm->IsFlyFreeFrm() ) { // --> OD 2004-06-30 #i28701# - use new method pFlyFrm->GetPageFrm()->RemoveFlyFromPage( pFlyFrm ); } } // <-- // --> OD 2004-11-29 #115759# - remove also drawing objects from page else if ( pObj->ISA(SwAnchoredDrawObject) ) { if (pObj->GetFrmFmt().GetAnchor().GetAnchorId() != FLY_AS_CHAR) { pObj->GetPageFrm()->RemoveDrawObjFromPage( *(static_cast(pObj)) ); } } // <-- } } SwFrm *SaveCntnt( SwLayoutFrm *pLay, SwFrm *pStart ) { if( pLay->IsSctFrm() && pLay->Lower() && pLay->Lower()->IsColumnFrm() ) lcl_RemoveFtns( (SwColumnFrm*)pLay->Lower(), sal_True, sal_True ); SwFrm *pSav; if ( 0 == (pSav = pLay->ContainsAny()) ) return 0; if( pSav->IsInFtn() && !pLay->IsInFtn() ) { do pSav = pSav->FindNext(); while( pSav && pSav->IsInFtn() ); if( !pSav || !pLay->IsAnLower( pSav ) ) return NULL; } // Tables should be saved as a whole, expection: // The contents of a section or a cell inside a table should be saved if ( pSav->IsInTab() && !( ( pLay->IsSctFrm() || pLay->IsCellFrm() ) && pLay->IsInTab() ) ) while ( !pSav->IsTabFrm() ) pSav = pSav->GetUpper(); if( pSav->IsInSct() ) { // Jetzt wird der oberste Bereich gesucht, der innerhalb von pLay ist. SwFrm* pSect = pLay->FindSctFrm(); SwFrm *pTmp = pSav; do { pSav = pTmp; pTmp = pSav->GetUpper() ? pSav->GetUpper()->FindSctFrm() : NULL; } while ( pTmp != pSect ); } SwFrm *pFloat = pSav; if( !pStart ) pStart = pSav; sal_Bool bGo = pStart == pSav; do { if( bGo ) pFloat->GetUpper()->pLower = 0; //Die Teilkette ausklinken. //Das Ende der Teilkette suchen, unterwegs die Flys abmelden. do { if( bGo ) { if ( pFloat->IsCntntFrm() ) { if ( pFloat->GetDrawObjs() ) ::lcl_RemoveObjsFromPage( (SwCntntFrm*)pFloat ); } else if ( pFloat->IsTabFrm() || pFloat->IsSctFrm() ) { SwCntntFrm *pCnt = ((SwLayoutFrm*)pFloat)->ContainsCntnt(); if( pCnt ) { do { if ( pCnt->GetDrawObjs() ) ::lcl_RemoveObjsFromPage( pCnt ); pCnt = pCnt->GetNextCntntFrm(); } while ( pCnt && ((SwLayoutFrm*)pFloat)->IsAnLower( pCnt ) ); } } else { ASSERT( !pFloat, "Neuer Float-Frame?" ); } } if ( pFloat->GetNext() ) { if( bGo ) pFloat->pUpper = NULL; pFloat = pFloat->GetNext(); if( !bGo && pFloat == pStart ) { bGo = sal_True; pFloat->pPrev->pNext = NULL; pFloat->pPrev = NULL; } } else break; } while ( pFloat ); //Die naechste Teilkette suchen und die Ketten miteinander verbinden. SwFrm *pTmp = pFloat->FindNext(); if( bGo ) pFloat->pUpper = NULL; if( !pLay->IsInFtn() ) while( pTmp && pTmp->IsInFtn() ) pTmp = pTmp->FindNext(); if ( !pLay->IsAnLower( pTmp ) ) pTmp = 0; if ( pTmp && bGo ) { pFloat->pNext = pTmp; //Die beiden Ketten verbinden. pFloat->pNext->pPrev = pFloat; } pFloat = pTmp; bGo = bGo || ( pStart == pFloat ); } while ( pFloat ); return bGo ? pStart : NULL; } // --> OD 2004-11-29 #115759# - add also drawing objects to page and at-fly // anchored objects to page void MA_FASTCALL lcl_AddObjsToPage( SwFrm* _pFrm, SwPageFrm* _pPage ) { ASSERT( _pFrm->GetDrawObjs(), "Keine DrawObjs fuer lcl_AddFlysToPage." ); SwSortedObjs &rObjs = *_pFrm->GetDrawObjs(); for ( sal_uInt16 i = 0; i < rObjs.Count(); ++i ) { SwAnchoredObject* pObj = rObjs[i]; // --> OD 2004-11-29 #115759# - unlock position of anchored object // in order to get the object's position calculated. pObj->UnlockPosition(); // <-- // --> OD 2004-11-29 #115759# - add also lower objects of as-character // anchored Writer fly frames from page if ( pObj->ISA(SwFlyFrm) ) { SwFlyFrm* pFlyFrm = static_cast(pObj); if ( pObj->ISA(SwFlyFreeFrm) ) { _pPage->AppendFlyToPage( pFlyFrm ); } pFlyFrm->_InvalidatePos(); pFlyFrm->_InvalidateSize(); pFlyFrm->InvalidatePage( _pPage ); // --> OD 2004-11-29 #115759# - add also at-fly anchored objects // to page if ( pFlyFrm->GetDrawObjs() ) { ::lcl_AddObjsToPage( pFlyFrm, _pPage ); } // <-- SwCntntFrm *pCnt = pFlyFrm->ContainsCntnt(); while ( pCnt ) { if ( pCnt->GetDrawObjs() ) ::lcl_AddObjsToPage( pCnt, _pPage ); pCnt = pCnt->GetNextCntntFrm(); } } // <-- // --> OD 2004-11-29 #115759# - remove also drawing objects from page else if ( pObj->ISA(SwAnchoredDrawObject) ) { if (pObj->GetFrmFmt().GetAnchor().GetAnchorId() != FLY_AS_CHAR) { pObj->InvalidateObjPos(); _pPage->AppendDrawObjToPage( *(static_cast(pObj)) ); } } // <-- } } void RestoreCntnt( SwFrm *pSav, SwLayoutFrm *pParent, SwFrm *pSibling, bool bGrow ) { ASSERT( pSav && pParent, "Kein Save oder Parent fuer Restore." ); SWRECTFN( pParent ) //Wenn es bereits FlowFrms unterhalb des neuen Parent gibt, so wird die //Kette, beginnend mit pSav, hinter dem letzten angehaengt. //Die Teile werden kurzerhand insertet und geeignet invalidiert. //Unterwegs werden die Flys der CntntFrms bei der Seite angemeldet. SwPageFrm *pPage = pParent->FindPageFrm(); if ( pPage ) pPage->InvalidatePage( pPage ); //Invalides Layout anmelden. //Vorgaenger festellen und die Verbindung herstellen bzw. initialisieren. pSav->pPrev = pSibling; SwFrm* pNxt; if ( pSibling ) { pNxt = pSibling->pNext; pSibling->pNext = pSav; pSibling->_InvalidatePrt(); ((SwCntntFrm*)pSibling)->InvalidatePage( pPage );//Invaliden Cntnt anmelden. if ( ((SwCntntFrm*)pSibling)->GetFollow() ) pSibling->Prepare( PREP_CLEAR, 0, sal_False ); } else { pNxt = pParent->pLower; pParent->pLower = pSav; pSav->pUpper = pParent; //Schon mal setzen, sonst ist fuer das //invalidate der Parent (z.B. ein Fly) nicht klar. //Invaliden Cntnt anmelden. if ( pSav->IsCntntFrm() ) ((SwCntntFrm*)pSav)->InvalidatePage( pPage ); else { // pSav koennte auch ein leerer SectFrm sein SwCntntFrm* pCnt = pParent->ContainsCntnt(); if( pCnt ) pCnt->InvalidatePage( pPage ); } } //Der Parent muss entsprechend gegrow'ed werden. SwTwips nGrowVal = 0; SwFrm* pLast; do { pSav->pUpper = pParent; nGrowVal += (pSav->Frm().*fnRect->fnGetHeight)(); pSav->_InvalidateAll(); //Jetzt die Flys anmelden, fuer TxtFrms gleich geeignet invalidieren. if ( pSav->IsCntntFrm() ) { if ( pSav->IsTxtFrm() && ((SwTxtFrm*)pSav)->GetCacheIdx() != USHRT_MAX ) ((SwTxtFrm*)pSav)->Init(); //Ich bin sein Freund. if ( pPage && pSav->GetDrawObjs() ) ::lcl_AddObjsToPage( (SwCntntFrm*)pSav, pPage ); } else { SwCntntFrm *pBlub = ((SwLayoutFrm*)pSav)->ContainsCntnt(); if( pBlub ) { do { if ( pPage && pBlub->GetDrawObjs() ) ::lcl_AddObjsToPage( pBlub, pPage ); if( pBlub->IsTxtFrm() && ((SwTxtFrm*)pBlub)->HasFtn() && ((SwTxtFrm*)pBlub)->GetCacheIdx() != USHRT_MAX ) ((SwTxtFrm*)pBlub)->Init(); //Ich bin sein Freund. pBlub = pBlub->GetNextCntntFrm(); } while ( pBlub && ((SwLayoutFrm*)pSav)->IsAnLower( pBlub )); } } pLast = pSav; pSav = pSav->GetNext(); } while ( pSav ); if( pNxt ) { pLast->pNext = pNxt; pNxt->pPrev = pLast; } if ( bGrow ) pParent->Grow( nGrowVal ); } /************************************************************************* |* |* SqRt() Berechnung der Quadratwurzel, damit die math.lib |* nicht auch noch dazugelinkt werden muss. |* |*************************************************************************/ sal_uLong MA_FASTCALL SqRt( BigInt nX ) { BigInt nErg = 1; if ( !nX.IsNeg() ) { BigInt nOldErg = 1; for ( int i = 0; i <= 5; i++ ) { nErg = (nOldErg + (nX / nOldErg)) / BigInt(2); nOldErg = nErg; } } return nErg >= BigInt(SAL_MAX_UINT32) ? ULONG_MAX : (sal_uLong)nErg; } /*************************************************************************/ SwPageFrm * MA_FASTCALL InsertNewPage( SwPageDesc &rDesc, SwFrm *pUpper, sal_Bool bOdd, sal_Bool bInsertEmpty, sal_Bool bFtn, SwFrm *pSibling ) { SwPageFrm *pRet; SwDoc *pDoc = ((SwLayoutFrm*)pUpper)->GetFmt()->GetDoc(); SwFrmFmt *pFmt = bOdd ? rDesc.GetRightFmt() : rDesc.GetLeftFmt(); //Wenn ich kein FrmFmt fuer die Seite gefunden habe, muss ich eben //eine Leerseite einfuegen. if ( !pFmt ) { pFmt = bOdd ? rDesc.GetLeftFmt() : rDesc.GetRightFmt(); ASSERT( pFmt, "Descriptor without any format?!" ); bInsertEmpty = !bInsertEmpty; } if( bInsertEmpty ) { SwPageDesc *pTmpDesc = pSibling && pSibling->GetPrev() ? ((SwPageFrm*)pSibling->GetPrev())->GetPageDesc() : &rDesc; pRet = new SwPageFrm( pDoc->GetEmptyPageFmt(), pUpper, pTmpDesc ); pRet->Paste( pUpper, pSibling ); pRet->PreparePage( bFtn ); } pRet = new SwPageFrm( pFmt, pUpper, &rDesc ); pRet->Paste( pUpper, pSibling ); pRet->PreparePage( bFtn ); if ( pRet->GetNext() ) ((SwRootFrm*)pRet->GetUpper())->AssertPageFlys( pRet ); return pRet; } /************************************************************************* |* |* RegistFlys(), Regist() Die beiden folgenden Methoden durchsuchen rekursiv |* eine Layoutstruktur und melden alle FlyFrms, die einen beliebigen Frm |* innerhalb der Struktur als Anker haben bei der Seite an. |* |*************************************************************************/ void MA_FASTCALL lcl_Regist( SwPageFrm *pPage, const SwFrm *pAnch ) { SwSortedObjs *pObjs = (SwSortedObjs*)pAnch->GetDrawObjs(); for ( sal_uInt16 i = 0; i < pObjs->Count(); ++i ) { SwAnchoredObject* pObj = (*pObjs)[i]; if ( pObj->ISA(SwFlyFrm) ) { SwFlyFrm *pFly = static_cast(pObj); //Ggf. ummelden, nicht anmelden wenn bereits bekannt. // --> OD 2004-06-30 #i28701# - use new method SwPageFrm *pPg = pFly->IsFlyFreeFrm() ? pFly->GetPageFrm() : pFly->FindPageFrm(); if ( pPg != pPage ) { if ( pPg ) pPg->RemoveFlyFromPage( pFly ); pPage->AppendFlyToPage( pFly ); } ::RegistFlys( pPage, pFly ); } else { // --> OD 2008-04-22 #i87493# if ( pPage != pObj->GetPageFrm() ) { // --> OD 2004-07-02 #i28701# if ( pObj->GetPageFrm() ) pObj->GetPageFrm()->RemoveDrawObjFromPage( *pObj ); pPage->AppendDrawObjToPage( *pObj ); // <-- } // <-- } const SwFlyFrm* pFly = pAnch->FindFlyFrm(); if ( pFly && pObj->GetDrawObj()->GetOrdNum() < pFly->GetVirtDrawObj()->GetOrdNum() && pObj->GetDrawObj()->GetPage() ) { //#i119945# set pFly's OrdNum to pObj's. So when pFly is removed by Undo, the original OrdNum will not be changed. pObj->DrawObj()->GetPage()->SetObjectOrdNum( pFly->GetVirtDrawObj()->GetOrdNumDirect(), pObj->GetDrawObj()->GetOrdNumDirect() ); } } } void RegistFlys( SwPageFrm *pPage, const SwLayoutFrm *pLay ) { if ( pLay->GetDrawObjs() ) ::lcl_Regist( pPage, pLay ); const SwFrm *pFrm = pLay->Lower(); while ( pFrm ) { if ( pFrm->IsLayoutFrm() ) ::RegistFlys( pPage, (const SwLayoutFrm*)pFrm ); else if ( pFrm->GetDrawObjs() ) ::lcl_Regist( pPage, pFrm ); pFrm = pFrm->GetNext(); } } /************************************************************************* |* |* void Notify() |* |* Beschreibung Benachrichtigt den Hintergrund je nach der |* Veraenderung zwischen altem und neuem Rechteckt. |* |*************************************************************************/ void Notify( SwFlyFrm *pFly, SwPageFrm *pOld, const SwRect &rOld, const SwRect* pOldPrt ) { const SwRect aFrm( pFly->GetObjRectWithSpaces() ); if ( rOld.Pos() != aFrm.Pos() ) { //Positionsaenderung, alten und neuen Bereich invalidieren if ( rOld.HasArea() && rOld.Left()+pFly->GetFmt()->GetLRSpace().GetLeft() < WEIT_WECH ) { pFly->NotifyBackground( pOld, rOld, PREP_FLY_LEAVE ); } pFly->NotifyBackground( pFly->FindPageFrm(), aFrm, PREP_FLY_ARRIVE ); } else if ( rOld.SSize() != aFrm.SSize() ) { //Groessenaenderung, den Bereich der Verlassen wurde bzw. jetzt //ueberdeckt wird invalidieren. //Der Einfachheit halber wird hier bewusst jeweils ein Twip //unnoetig invalidiert. ViewShell *pSh = pFly->getRootFrm()->GetCurrShell(); if( pSh && rOld.HasArea() ) pSh->InvalidateWindows( rOld ); // --> OD 2005-08-19 #i51941# - consider case that fly frame isn't // registered at the old page SwPageFrm* pPageFrm = pFly->FindPageFrm(); if ( pOld != pPageFrm ) { pFly->NotifyBackground( pPageFrm, aFrm, PREP_FLY_ARRIVE ); } // <-- if ( rOld.Left() != aFrm.Left() ) { SwRect aTmp( rOld ); aTmp.Union( aFrm ); aTmp.Left( Min(aFrm.Left(), rOld.Left()) ); aTmp.Right( Max(aFrm.Left(), rOld.Left()) ); pFly->NotifyBackground( pOld, aTmp, PREP_FLY_CHGD ); } SwTwips nOld = rOld.Right(); SwTwips nNew = aFrm.Right(); if ( nOld != nNew ) { SwRect aTmp( rOld ); aTmp.Union( aFrm ); aTmp.Left( Min(nNew, nOld) ); aTmp.Right( Max(nNew, nOld) ); pFly->NotifyBackground( pOld, aTmp, PREP_FLY_CHGD ); } if ( rOld.Top() != aFrm.Top() ) { SwRect aTmp( rOld ); aTmp.Union( aFrm ); aTmp.Top( Min(aFrm.Top(), rOld.Top()) ); aTmp.Bottom( Max(aFrm.Top(), rOld.Top()) ); pFly->NotifyBackground( pOld, aTmp, PREP_FLY_CHGD ); } nOld = rOld.Bottom(); nNew = aFrm.Bottom(); if ( nOld != nNew ) { SwRect aTmp( rOld ); aTmp.Union( aFrm ); aTmp.Top( Min(nNew, nOld) ); aTmp.Bottom( Max(nNew, nOld) ); pFly->NotifyBackground( pOld, aTmp, PREP_FLY_CHGD ); } } else if ( pOldPrt && *pOldPrt != pFly->Prt() && pFly->GetFmt()->GetSurround().IsContour() ) { // #i24097# pFly->NotifyBackground( pFly->FindPageFrm(), aFrm, PREP_FLY_ARRIVE ); } } /*************************************************************************/ void lcl_CheckFlowBack( SwFrm* pFrm, const SwRect &rRect ) { SwTwips nBottom = rRect.Bottom(); while( pFrm ) { if( pFrm->IsLayoutFrm() ) { if( rRect.IsOver( pFrm->Frm() ) ) lcl_CheckFlowBack( ((SwLayoutFrm*)pFrm)->Lower(), rRect ); } else if( !pFrm->GetNext() && nBottom > pFrm->Frm().Bottom() ) { if( pFrm->IsCntntFrm() && ((SwCntntFrm*)pFrm)->HasFollow() ) pFrm->InvalidateSize(); else pFrm->InvalidateNextPos(); } pFrm = pFrm->GetNext(); } } void MA_FASTCALL lcl_NotifyCntnt( const SdrObject *pThis, SwCntntFrm *pCnt, const SwRect &rRect, const PrepareHint eHint ) { if ( pCnt->IsTxtFrm() ) { SwRect aCntPrt( pCnt->Prt() ); aCntPrt.Pos() += pCnt->Frm().Pos(); if ( eHint == PREP_FLY_ATTR_CHG ) { // --> OD 2004-10-20 #i35640# - use given rectangle instead // of current bound rectangle if ( aCntPrt.IsOver( rRect ) ) // <-- pCnt->Prepare( PREP_FLY_ATTR_CHG ); } // --> OD 2004-11-01 #i23129# - only invalidate, if the text frame // printing area overlaps with the given rectangle. else if ( aCntPrt.IsOver( rRect ) ) // <-- pCnt->Prepare( eHint, (void*)&aCntPrt._Intersection( rRect ) ); if ( pCnt->GetDrawObjs() ) { const SwSortedObjs &rObjs = *pCnt->GetDrawObjs(); for ( sal_uInt16 i = 0; i < rObjs.Count(); ++i ) { SwAnchoredObject* pObj = rObjs[i]; if ( pObj->ISA(SwFlyFrm) ) { SwFlyFrm *pFly = static_cast(pObj); if ( pFly->IsFlyInCntFrm() ) { SwCntntFrm *pCntnt = pFly->ContainsCntnt(); while ( pCntnt ) { ::lcl_NotifyCntnt( pThis, pCntnt, rRect, eHint ); pCntnt = pCntnt->GetNextCntntFrm(); } } } } } } } void Notify_Background( const SdrObject* pObj, SwPageFrm* pPage, const SwRect& rRect, const PrepareHint eHint, const sal_Bool bInva ) { //Wenn der Frm gerade erstmalig sinnvoll positioniert wurde, braucht der //alte Bereich nicht benachrichtigt werden. if ( eHint == PREP_FLY_LEAVE && rRect.Top() == WEIT_WECH ) return; SwLayoutFrm* pArea; SwFlyFrm *pFlyFrm = 0; SwFrm* pAnchor; if( pObj->ISA(SwVirtFlyDrawObj) ) { pFlyFrm = ((SwVirtFlyDrawObj*)pObj)->GetFlyFrm(); pAnchor = pFlyFrm->AnchorFrm(); } else { pFlyFrm = NULL; pAnchor = const_cast( GetUserCall(pObj)->GetAnchoredObj( pObj )->GetAnchorFrm() ); } if( PREP_FLY_LEAVE != eHint && pAnchor->IsInFly() ) pArea = pAnchor->FindFlyFrm(); else pArea = pPage; SwCntntFrm *pCnt = 0; if ( pArea ) { if( PREP_FLY_ARRIVE != eHint ) lcl_CheckFlowBack( pArea, rRect ); //Es reagieren sowieso nur die auf den Anker folgenden auf den Fly, also //brauchen diese nicht abgeklappert werden. //Ausnahme sind ist natuerlich das LEAVE, denn der Fly koennte ja von //"oben" kommen. // Wenn der Anker auf der vorhergehenden Seite liegt, muss ebenfalls // die gesamte Seite abgearbeitet werden. (47722) // OD 2004-05-13 #i28701# - If the wrapping style has to be considered // on the object positioning, the complete area has to be processed, // because content frames before the anchor frame also have to consider // the object for the text wrapping. // --> OD 2004-08-25 #i3317# - The complete area has always been // processed. { pCnt = pArea->ContainsCntnt(); } // <-- } SwFrm *pLastTab = 0; while ( pCnt && pArea && pArea->IsAnLower( pCnt ) ) { ::lcl_NotifyCntnt( pObj, pCnt, rRect, eHint ); if ( pCnt->IsInTab() ) { SwLayoutFrm* pCell = pCnt->GetUpper(); // --> OD 2005-01-14 #i40606# - use // instead of , because a recalculation // of the bounding rectangle isn't intended here. if ( pCell->IsCellFrm() && ( pCell->Frm().IsOver( pObj->GetLastBoundRect() ) || pCell->Frm().IsOver( rRect ) ) ) // <-- { const SwFmtVertOrient &rOri = pCell->GetFmt()->GetVertOrient(); if ( text::VertOrientation::NONE != rOri.GetVertOrient() ) pCell->InvalidatePrt(); } SwTabFrm *pTab = pCnt->FindTabFrm(); if ( pTab != pLastTab ) { pLastTab = pTab; // --> OD 2005-01-14 #i40606# - use // instead of , because a recalculation // of the bounding rectangle isn't intended here. if ( pTab->Frm().IsOver( pObj->GetLastBoundRect() ) || pTab->Frm().IsOver( rRect ) ) // <-- { if ( !pFlyFrm || !pFlyFrm->IsLowerOf( pTab ) ) pTab->InvalidatePrt(); } } } pCnt = pCnt->GetNextCntntFrm(); } // #108745# Sorry, but this causes nothing but trouble. I remove these lines // taking the risk that the footer frame will have a wrong height // if( pPage->Lower() ) // { // SwFrm* pFrm = pPage->Lower(); // while( pFrm->GetNext() ) // pFrm = pFrm->GetNext(); // if( pFrm->IsFooterFrm() && // ( ( pFrm->Frm().IsOver( pObj->GetBoundRect() ) || // pFrm->Frm().IsOver( rRect ) ) ) ) // pFrm->InvalidateSize(); // } // --> OD 2007-07-24 #128702# - make code robust if ( pPage && pPage->GetSortedObjs() ) // <-- { pObj->GetOrdNum(); const SwSortedObjs &rObjs = *pPage->GetSortedObjs(); for ( sal_uInt16 i = 0; i < rObjs.Count(); ++i ) { SwAnchoredObject* pAnchoredObj = rObjs[i]; if ( pAnchoredObj->ISA(SwFlyFrm) ) { if( pAnchoredObj->GetDrawObj() == pObj ) continue; SwFlyFrm *pFly = static_cast(pAnchoredObj); if ( pFly->Frm().Top() == WEIT_WECH ) continue; if ( !pFlyFrm || (!pFly->IsLowerOf( pFlyFrm ) && pFly->GetVirtDrawObj()->GetOrdNumDirect() < pObj->GetOrdNumDirect())) { pCnt = pFly->ContainsCntnt(); while ( pCnt ) { ::lcl_NotifyCntnt( pObj, pCnt, rRect, eHint ); pCnt = pCnt->GetNextCntntFrm(); } } if( pFly->IsFlyLayFrm() ) { if( pFly->Lower() && pFly->Lower()->IsColumnFrm() && pFly->Frm().Bottom() >= rRect.Top() && pFly->Frm().Top() <= rRect.Bottom() && pFly->Frm().Right() >= rRect.Left() && pFly->Frm().Left() <= rRect.Right() ) { pFly->InvalidateSize(); } } //Flys, die ueber mir liegen muessen/mussten evtl. //ausweichen, wenn sie eine automatische Ausrichtung haben. //das ist unabhaengig von meinem Attribut, weil dies sich //gerade geaendert haben kann und eben deshalb //umformatiert wurde. else if ( pFly->IsFlyAtCntFrm() && pObj->GetOrdNumDirect() < pFly->GetVirtDrawObj()->GetOrdNumDirect() && pFlyFrm && !pFly->IsLowerOf( pFlyFrm ) ) { const SwFmtHoriOrient &rH = pFly->GetFmt()->GetHoriOrient(); if ( text::HoriOrientation::NONE != rH.GetHoriOrient() && text::HoriOrientation::CENTER != rH.GetHoriOrient() && ( !pFly->IsAutoPos() || text::RelOrientation::CHAR != rH.GetRelationOrient() ) && (pFly->Frm().Bottom() >= rRect.Top() && pFly->Frm().Top() <= rRect.Bottom()) ) pFly->InvalidatePos(); } } } } if ( pFlyFrm && pAnchor->GetUpper() && pAnchor->IsInTab() )//MA_FLY_HEIGHT pAnchor->GetUpper()->InvalidateSize(); // --> OD 2008-01-30 #i82258# - make code robust ViewShell* pSh = 0; if ( bInva && pPage && 0 != (pSh = pPage->getRootFrm()->GetCurrShell()) ) { pSh->InvalidateWindows( rRect ); } // <-- } /************************************************************************* |* |* GetVirtualUpper() liefert bei absatzgebundenen Objekten den Upper |* des Ankers. Falls es sich dabei um verkettete Rahmen oder |* Fussnoten handelt, wird ggf. der "virtuelle" Upper ermittelt. |* |*************************************************************************/ const SwFrm* GetVirtualUpper( const SwFrm* pFrm, const Point& rPos ) { if( pFrm->IsTxtFrm() ) { pFrm = pFrm->GetUpper(); if( !pFrm->Frm().IsInside( rPos ) ) { if( pFrm->IsFtnFrm() ) { const SwFtnFrm* pTmp = ((SwFtnFrm*)pFrm)->GetFollow(); while( pTmp ) { if( pTmp->Frm().IsInside( rPos ) ) return pTmp; pTmp = pTmp->GetFollow(); } } else { SwFlyFrm* pTmp = (SwFlyFrm*)pFrm->FindFlyFrm(); while( pTmp ) { if( pTmp->Frm().IsInside( rPos ) ) return pTmp; pTmp = pTmp->GetNextLink(); } } } } return pFrm; } /*************************************************************************/ sal_Bool Is_Lower_Of( const SwFrm *pCurrFrm, const SdrObject* pObj ) { Point aPos; const SwFrm* pFrm; if( pObj->ISA(SwVirtFlyDrawObj) ) { const SwFlyFrm* pFly = ( (SwVirtFlyDrawObj*)pObj )->GetFlyFrm(); pFrm = pFly->GetAnchorFrm(); aPos = pFly->Frm().Pos(); } else { pFrm = ( (SwDrawContact*)GetUserCall(pObj) )->GetAnchorFrm(pObj); aPos = pObj->GetCurrentBoundRect().TopLeft(); } ASSERT( pFrm, "8-( Fly is lost in Space." ); pFrm = GetVirtualUpper( pFrm, aPos ); do { if ( pFrm == pCurrFrm ) return sal_True; if( pFrm->IsFlyFrm() ) { aPos = pFrm->Frm().Pos(); pFrm = GetVirtualUpper( ((const SwFlyFrm*)pFrm)->GetAnchorFrm(), aPos ); } else pFrm = pFrm->GetUpper(); } while ( pFrm ); return sal_False; } const SwFrm *FindKontext( const SwFrm *pFrm, sal_uInt16 nAdditionalKontextTyp ) { //Liefert die Umgebung des Frm in die kein Fly aus einer anderen //Umgebung hineinragen kann. const sal_uInt16 nTyp = FRM_ROOT | FRM_HEADER | FRM_FOOTER | FRM_FTNCONT | FRM_FTN | FRM_FLY | FRM_TAB | FRM_ROW | FRM_CELL | nAdditionalKontextTyp; do { if ( pFrm->GetType() & nTyp ) break; pFrm = pFrm->GetUpper(); } while( pFrm ); return pFrm; } sal_Bool IsFrmInSameKontext( const SwFrm *pInnerFrm, const SwFrm *pFrm ) { const SwFrm *pKontext = FindKontext( pInnerFrm, 0 ); const sal_uInt16 nTyp = FRM_ROOT | FRM_HEADER | FRM_FOOTER | FRM_FTNCONT | FRM_FTN | FRM_FLY | FRM_TAB | FRM_ROW | FRM_CELL; do { if ( pFrm->GetType() & nTyp ) { if( pFrm == pKontext ) return sal_True; if( pFrm->IsCellFrm() ) return sal_False; } if( pFrm->IsFlyFrm() ) { Point aPos( pFrm->Frm().Pos() ); pFrm = GetVirtualUpper( ((const SwFlyFrm*)pFrm)->GetAnchorFrm(), aPos ); } else pFrm = pFrm->GetUpper(); } while( pFrm ); return sal_False; } //--------------------------------- SwTwips MA_FASTCALL lcl_CalcCellRstHeight( SwLayoutFrm *pCell ) { if ( pCell->Lower()->IsCntntFrm() || pCell->Lower()->IsSctFrm() ) { SwFrm *pLow = pCell->Lower(); long nHeight = 0, nFlyAdd = 0; do { long nLow = pLow->Frm().Height(); if( pLow->IsTxtFrm() && ((SwTxtFrm*)pLow)->IsUndersized() ) nLow += ((SwTxtFrm*)pLow)->GetParHeight()-pLow->Prt().Height(); else if( pLow->IsSctFrm() && ((SwSectionFrm*)pLow)->IsUndersized() ) nLow += ((SwSectionFrm*)pLow)->Undersize(); nFlyAdd = Max( 0L, nFlyAdd - nLow ); nFlyAdd = Max( nFlyAdd, ::CalcHeightWidthFlys( pLow ) ); nHeight += nLow; pLow = pLow->GetNext(); } while ( pLow ); if ( nFlyAdd ) nHeight += nFlyAdd; //Der Border will natuerlich auch mitspielen, er kann leider nicht //aus PrtArea und Frm errechnet werden, da diese in beliebiger //Kombination ungueltig sein koennen. SwBorderAttrAccess aAccess( SwFrm::GetCache(), pCell ); const SwBorderAttrs &rAttrs = *aAccess.Get(); nHeight += rAttrs.CalcTop() + rAttrs.CalcBottom(); return pCell->Frm().Height() - nHeight; } else { long nRstHeight = 0; SwFrm *pLow = pCell->Lower(); do { nRstHeight += ::CalcRowRstHeight( (SwLayoutFrm*)pLow ); pLow = pLow->GetNext(); } while ( pLow ); return nRstHeight; } } SwTwips MA_FASTCALL CalcRowRstHeight( SwLayoutFrm *pRow ) { SwTwips nRstHeight = LONG_MAX; SwLayoutFrm *pLow = (SwLayoutFrm*)pRow->Lower(); while ( pLow ) { nRstHeight = Min( nRstHeight, ::lcl_CalcCellRstHeight( pLow ) ); pLow = (SwLayoutFrm*)pLow->GetNext(); } return nRstHeight; } const SwFrm* MA_FASTCALL FindPage( const SwRect &rRect, const SwFrm *pPage ) { if ( !rRect.IsOver( pPage->Frm() ) ) { const SwRootFrm* pRootFrm = static_cast(pPage->GetUpper()); const SwFrm* pTmpPage = pRootFrm ? pRootFrm->GetPageAtPos( rRect.TopLeft(), &rRect.SSize(), true ) : 0; if ( pTmpPage ) pPage = pTmpPage; } return pPage; } #include class SwFrmHolder : private SfxListener { SwFrm* pFrm; bool bSet; virtual void Notify( SfxBroadcaster& rBC, const SfxHint& rHint ); public: SwFrmHolder() : pFrm(0), bSet(false) {} void SetFrm( SwFrm* pHold ); SwFrm* GetFrm() { return pFrm; } void Reset(); bool IsSet() { return bSet; } }; void SwFrmHolder::SetFrm( SwFrm* pHold ) { bSet = true; pFrm = pHold; StartListening(*pHold); } void SwFrmHolder::Reset() { if (pFrm) EndListening(*pFrm); bSet = false; pFrm = 0; } void SwFrmHolder::Notify( SfxBroadcaster& rBC, const SfxHint& rHint ) { if ( rHint.IsA(TYPE(SfxSimpleHint)) ) { if ( ( (SfxSimpleHint&) rHint ).GetId() == SFX_HINT_DYING && &rBC == pFrm ) pFrm = 0; } } SwFrm* GetFrmOfModify( const SwRootFrm* pLayout, SwModify const& rMod, sal_uInt16 const nFrmType, const Point* pPoint, const SwPosition *pPos, const sal_Bool bCalcFrm ) { SwFrm *pMinFrm = 0, *pTmpFrm; SwFrmHolder aHolder; SwRect aCalcRect; bool bClientIterChanged = false; SwIterator aIter( rMod ); do { pMinFrm = 0; aHolder.Reset(); sal_uInt64 nMinDist = 0; bClientIterChanged = false; for( pTmpFrm = aIter.First(); pTmpFrm; pTmpFrm = aIter.Next() ) { if( pTmpFrm->GetType() & nFrmType && ( !pLayout || pLayout == pTmpFrm->getRootFrm() ) && (!pTmpFrm->IsFlowFrm() || !SwFlowFrm::CastFlowFrm( pTmpFrm )->IsFollow() )) { if( pPoint ) { // watch for Frm being deleted if ( pMinFrm ) aHolder.SetFrm( pMinFrm ); else aHolder.Reset(); if( bCalcFrm ) { // --> OD 2005-03-04 #b6234250# - format parent Writer // fly frame, if it isn't been formatted yet. // Note: The Writer fly frame could be the frame itself. SwFlyFrm* pFlyFrm( pTmpFrm->FindFlyFrm() ); if ( pFlyFrm && pFlyFrm->Frm().Pos().X() == WEIT_WECH && pFlyFrm->Frm().Pos().Y() == WEIT_WECH ) { SwObjectFormatter::FormatObj( *pFlyFrm ); } // <-- pTmpFrm->Calc(); } // #127369# // aIter.IsChanged checks if the current pTmpFrm has been deleted while // it is the current iterator // FrmHolder watches for deletion of the current pMinFrm if( aIter.IsChanged() || ( aHolder.IsSet() && !aHolder.GetFrm() ) ) { // restart iteration bClientIterChanged = true; break; } // bei Flys ggfs. ueber den Parent gehen wenn sie selbst // nocht nicht "formatiert" sind if( !bCalcFrm && nFrmType & FRM_FLY && ((SwFlyFrm*)pTmpFrm)->GetAnchorFrm() && WEIT_WECH == pTmpFrm->Frm().Pos().X() && WEIT_WECH == pTmpFrm->Frm().Pos().Y() ) aCalcRect = ((SwFlyFrm*)pTmpFrm)->GetAnchorFrm()->Frm(); else aCalcRect = pTmpFrm->Frm(); if ( aCalcRect.IsInside( *pPoint ) ) { pMinFrm = pTmpFrm; break; } // Point not in rectangle. Compare distances: const Point aCalcRectCenter = aCalcRect.Center(); const Point aDiff = aCalcRectCenter - *pPoint; const sal_uInt64 nCurrentDist = aDiff.X() * aDiff.X() + aDiff.Y() * aDiff.Y(); // opt: no sqrt if ( !pMinFrm || nCurrentDist < nMinDist ) { pMinFrm = pTmpFrm; nMinDist = nCurrentDist; } } else { // Wenn kein pPoint angegeben ist, dann reichen // wir irgendeinen raus: den ersten! pMinFrm = pTmpFrm; break; } } } } while( bClientIterChanged ); if( pPos && pMinFrm && pMinFrm->IsTxtFrm() ) return ((SwTxtFrm*)pMinFrm)->GetFrmAtPos( *pPos ); return pMinFrm; } sal_Bool IsExtraData( const SwDoc *pDoc ) { const SwLineNumberInfo &rInf = pDoc->GetLineNumberInfo(); return rInf.IsPaintLineNumbers() || rInf.IsCountInFlys() || ((sal_Int16)SW_MOD()->GetRedlineMarkPos() != text::HoriOrientation::NONE && pDoc->GetRedlineTbl().Count()); } // OD 22.09.2003 #110978# const SwRect SwPageFrm::PrtWithoutHeaderAndFooter() const { SwRect aPrtWithoutHeaderFooter( Prt() ); aPrtWithoutHeaderFooter.Pos() += Frm().Pos(); const SwFrm* pLowerFrm = Lower(); while ( pLowerFrm ) { // Note: independent on text direction page header and page footer are // always at top respectively at bottom of the page frame. if ( pLowerFrm->IsHeaderFrm() ) { aPrtWithoutHeaderFooter.Top( aPrtWithoutHeaderFooter.Top() + pLowerFrm->Frm().Height() ); } if ( pLowerFrm->IsFooterFrm() ) { aPrtWithoutHeaderFooter.Bottom( aPrtWithoutHeaderFooter.Bottom() - pLowerFrm->Frm().Height() ); } pLowerFrm = pLowerFrm->GetNext(); } return aPrtWithoutHeaderFooter; } /** method to determine the spacing values of a frame OD 2004-03-10 #i28701# OD 2009-08-28 #i102458# Add output parameter @author OD */ void GetSpacingValuesOfFrm( const SwFrm& rFrm, SwTwips& onLowerSpacing, SwTwips& onLineSpacing, bool& obIsLineSpacingProportional ) { if ( !rFrm.IsFlowFrm() ) { onLowerSpacing = 0; onLineSpacing = 0; } else { const SvxULSpaceItem& rULSpace = rFrm.GetAttrSet()->GetULSpace(); onLowerSpacing = rULSpace.GetLower(); onLineSpacing = 0; obIsLineSpacingProportional = false; if ( rFrm.IsTxtFrm() ) { onLineSpacing = static_cast(rFrm).GetLineSpace(); obIsLineSpacingProportional = onLineSpacing != 0 && static_cast(rFrm).GetLineSpace( true ) == 0; } ASSERT( onLowerSpacing >= 0 && onLineSpacing >= 0, " - spacing values aren't positive!" ); } } /** method to get the content of the table cell, skipping content from nested tables */ const SwCntntFrm* GetCellCntnt( const SwLayoutFrm& rCell ) { const SwCntntFrm* pCntnt = rCell.ContainsCntnt(); const SwTabFrm* pTab = rCell.FindTabFrm(); while ( pCntnt && rCell.IsAnLower( pCntnt ) ) { const SwTabFrm* pTmpTab = pCntnt->FindTabFrm(); if ( pTmpTab != pTab ) { pCntnt = pTmpTab->FindLastCntnt(); if ( pCntnt ) pCntnt = pCntnt->FindNextCnt(); } else break; } return pCntnt; } /** Can be used to check if a frame has been deleted */ bool SwDeletionChecker::HasBeenDeleted() { if ( !mpFrm || !mpRegIn ) return false; SwIterator aIter(*mpRegIn); SwFrm* pLast = aIter.First(); while ( pLast ) { if ( pLast == mpFrm ) return false; pLast = aIter.Next(); } return true; }