/************************************************************** * * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. * *************************************************************/ // MARKER(update_precomp.py): autogen include statement, do not remove #include "precompiled_sw.hxx" #define _SVX_PARAITEM_HXX #define _SVX_TEXTITEM_HXX #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../../ui/inc/view.hxx" #include #include #include #include #include #include sal_Bool ViewShell::bLstAct = sal_False; ShellResource *ViewShell::pShellRes = 0; Window *ViewShell::pCareWindow = 0; BitmapEx* ViewShell::pErrorBmp = NULL; BitmapEx* ViewShell::pReplaceBmp = NULL; sal_Bool bInSizeNotify = sal_False; DBG_NAME(LayoutIdle) TYPEINIT0(ViewShell); using namespace ::com::sun::star; ////////////////////////////////////////////////////////////////////////////// // #i72754# 2nd set of Pre/PostPaints // This time it uses the lock counter mnPrePostPaintCount to allow only one activation // and deactivation and mpPrePostOutDev to remember the OutDev from the BeginDrawLayers // call. That way, all places where paint take place can be handled the same way, even // when calling other paint methods. This is the case at the places where SW paints // buffered into VDevs to avoid flicker. Tis is in general problematic and should be // solved once using the BufferedOutput functionality of the DrawView. void ViewShell::PrePaint() { // forward PrePaint event from VCL Window to DrawingLayer if(HasDrawView()) { Imp()->GetDrawView()->PrePaint(); } } void ViewShell::DLPrePaint2(const Region& rRegion) { if(0L == mnPrePostPaintCount) { // #i75172# ensure DrawView to use DrawingLayer bufferings if ( !HasDrawView() ) MakeDrawView(); // Prefer window; if tot available, get pOut (e.g. printer) mpPrePostOutDev = (GetWin() ? GetWin() : GetOut()); // #i74769# use SdrPaintWindow now direct mpTargetPaintWindow = Imp()->GetDrawView()->BeginDrawLayers(mpPrePostOutDev, rRegion); OSL_ENSURE(mpTargetPaintWindow, "BeginDrawLayers: Got no SdrPaintWindow (!)"); // #i74769# if prerender, save OutDev and redirect to PreRenderDevice if(mpTargetPaintWindow->GetPreRenderDevice()) { mpBufferedOut = pOut; pOut = &(mpTargetPaintWindow->GetTargetOutputDevice()); } // remember original paint MapMode for wrapped FlyFrame paints maPrePostMapMode = pOut->GetMapMode(); } mnPrePostPaintCount++; } void ViewShell::DLPostPaint2(bool bPaintFormLayer) { OSL_ENSURE(mnPrePostPaintCount > 0L, "ViewShell::DLPostPaint2: Pre/PostPaint encapsulation broken (!)"); mnPrePostPaintCount--; if((0L == mnPrePostPaintCount) && (0 != mpTargetPaintWindow)) { // #i74769# restore buffered OutDev if(mpTargetPaintWindow->GetPreRenderDevice()) { pOut = mpBufferedOut; } // #i74769# use SdrPaintWindow now direct Imp()->GetDrawView()->EndDrawLayers(*mpTargetPaintWindow, bPaintFormLayer); mpTargetPaintWindow = 0; } } ////////////////////////////////////////////////////////////////////////////// /****************************************************************************** |* |* ViewShell::ImplEndAction() |* |* Letzte Aenderung MA 04. Sep. 96 |* ******************************************************************************/ void ViewShell::ImplEndAction( const sal_Bool bIdleEnd ) { //Fuer den Drucker gibt es hier nichts zu tun. if ( !GetWin() || IsPreView() ) { bPaintWorks = sal_True; UISizeNotify(); return; } bInEndAction = sal_True; //Laeuft hiermit das EndAction der Letzten Shell im Ring? ViewShell::bLstAct = sal_True; ViewShell *pSh = (ViewShell*)this->GetNext(); while ( pSh != this ) { if ( pSh->ActionPend() ) { ViewShell::bLstAct = sal_False; pSh = this; } else pSh = (ViewShell*)pSh->GetNext(); } const bool bIsShellForCheckViewLayout = ( this == GetLayout()->GetCurrShell() ); SET_CURR_SHELL( this ); if ( Imp()->HasDrawView() && !Imp()->GetDrawView()->areMarkHandlesHidden() ) Imp()->StartAction(); if ( Imp()->GetRegion() && Imp()->GetRegion()->GetOrigin() != VisArea() ) Imp()->DelRegion(); const sal_Bool bExtraData = ::IsExtraData( GetDoc() ); if ( !bIdleEnd ) { SwLayAction aAction( GetLayout(), Imp() ); aAction.SetComplete( sal_False ); if ( nLockPaint ) aAction.SetPaint( sal_False ); aAction.SetInputType( INPUT_KEYBOARD ); aAction.Action(); } if ( bIsShellForCheckViewLayout ) GetLayout()->CheckViewLayout( GetViewOptions(), &aVisArea ); //Wenn wir selbst keine Paints erzeugen, so warten wir auf das Paint //vom System. Dann ist das Clipping korrekt gesetzt; Beispiel: verschieben //eines DrawObjektes. if ( Imp()->GetRegion() || aInvalidRect.HasArea() || bExtraData ) { if ( !nLockPaint ) { sal_Bool bPaintsFromSystem = aInvalidRect.HasArea(); GetWin()->Update(); if ( aInvalidRect.HasArea() ) { if ( bPaintsFromSystem ) Imp()->AddPaintRect( aInvalidRect ); ResetInvalidRect(); bPaintsFromSystem = sal_True; } bPaintWorks = sal_True; SwRegionRects *pRegion = Imp()->GetRegion(); //JP 27.11.97: wer die Selection hided, muss sie aber auch // wieder Showen. Sonst gibt es Paintfehler! // z.B.: addional Mode, Seite vertikal hab zu sehen, in der // Mitte eine Selektion und mit einem anderen Cursor an linken // rechten Rand springen. Ohne ShowCrsr verschwindet die // Selektion sal_Bool bShowCrsr = pRegion && IsA( TYPE(SwCrsrShell) ); if( bShowCrsr ) ((SwCrsrShell*)this)->HideCrsrs(); if ( pRegion ) { SwRootFrm* pCurrentLayout = GetLayout(); Imp()->pRegion = NULL; //Erst Invert dann Compress, niemals andersherum! pRegion->Invert(); pRegion->Compress(); VirtualDevice *pVout = 0; while ( pRegion->Count() ) { SwRect aRect( (*pRegion)[ pRegion->Count() - 1 ] ); pRegion->Remove( pRegion->Count() - 1 ); sal_Bool bPaint = sal_True; if ( IsEndActionByVirDev() ) { //virtuelles device erzeugen und einstellen. if ( !pVout ) pVout = new VirtualDevice( *GetOut() ); MapMode aMapMode( GetOut()->GetMapMode() ); pVout->SetMapMode( aMapMode ); sal_Bool bSizeOK = sal_True; Rectangle aTmp1( aRect.SVRect() ); aTmp1 = GetOut()->LogicToPixel( aTmp1 ); Rectangle aTmp2( GetOut()->PixelToLogic( aTmp1 ) ); if ( aTmp2.Left() > aRect.Left() ) aTmp1.Left() = Max( 0L, aTmp1.Left() - 1L ); if ( aTmp2.Top() > aRect.Top() ) aTmp1.Top() = Max( 0L, aTmp1.Top() - 1L ); aTmp1.Right() += 1; aTmp1.Bottom() += 1; aTmp1 = GetOut()->PixelToLogic( aTmp1 ); aRect = SwRect( aTmp1 ); const Size aTmp( pVout->GetOutputSize() ); if ( aTmp.Height() < aRect.Height() || aTmp.Width() < aRect.Width() ) { bSizeOK = pVout->SetOutputSize( aRect.SSize() ); } if ( bSizeOK ) { bPaint = sal_False; // --> OD 2007-07-26 #i79947# // #i72754# start Pre/PostPaint encapsulation before pOut is changed to the buffering VDev const Region aRepaintRegion(aRect.SVRect()); DLPrePaint2(aRepaintRegion); // <-- OutputDevice *pOld = GetOut(); pVout->SetLineColor( pOld->GetLineColor() ); pVout->SetFillColor( pOld->GetFillColor() ); Point aOrigin( aRect.Pos() ); aOrigin.X() = -aOrigin.X(); aOrigin.Y() = -aOrigin.Y(); aMapMode.SetOrigin( aOrigin ); pVout->SetMapMode( aMapMode ); pOut = pVout; if ( bPaintsFromSystem ) PaintDesktop( aRect ); pCurrentLayout->Paint( aRect ); pOld->DrawOutDev( aRect.Pos(), aRect.SSize(), aRect.Pos(), aRect.SSize(), *pVout ); pOut = pOld; // #i72754# end Pre/PostPaint encapsulation when pOut is back and content is painted DLPostPaint2(true); } } if ( bPaint ) { // #i75172# begin DrawingLayer paint // need to do begin/end DrawingLayer preparation for each single rectangle of the // repaint region. I already tried to prepare only once for the whole Region. This // seems to work (and does technically) but fails with transparent objects. Since the // region given to BeginDarwLayers() defines the clip region for DrawingLayer paint, // transparent objects in the single rectangles will indeed be painted multiple times. DLPrePaint2(Region(aRect.SVRect())); if ( bPaintsFromSystem ) PaintDesktop( aRect ); pCurrentLayout->Paint( aRect ); // #i75172# end DrawingLayer paint DLPostPaint2(true); } // --> OD 2009-12-03 #i107365# // Direct paint has been performed. Thus, take care of // transparent child windows. if ( GetWin() ) { Window& rWindow = *(GetWin()); if(rWindow.IsChildTransparentModeEnabled() && rWindow.GetChildCount()) { const Rectangle aRectanglePixel(rWindow.LogicToPixel(aRect.SVRect())); for ( sal_uInt16 a(0); a < rWindow.GetChildCount(); a++ ) { Window* pCandidate = rWindow.GetChild(a); if ( pCandidate && pCandidate->IsPaintTransparent() ) { const Rectangle aCandidatePosSizePixel( pCandidate->GetPosPixel(), pCandidate->GetSizePixel()); if ( aCandidatePosSizePixel.IsOver(aRectanglePixel) ) { pCandidate->Invalidate( INVALIDATE_NOTRANSPARENT|INVALIDATE_CHILDREN ); pCandidate->Update(); } } } } } // <-- } delete pVout; delete pRegion; Imp()->DelRegion(); } if( bShowCrsr ) ((SwCrsrShell*)this)->ShowCrsrs( sal_True ); } else { Imp()->DelRegion(); bPaintWorks = sal_True; } } else bPaintWorks = sal_True; bInEndAction = sal_False; ViewShell::bLstAct = sal_False; Imp()->EndAction(); //Damit sich die automatischen Scrollbars auch richtig anordnen k?nnen //muessen wir die Aktion hier kuenstlich beenden (EndAction loesst ein //Notify aus, und das muss Start-/EndAction rufen um die Scrollbars //klarzubekommen. --nStartAction; UISizeNotify(); ++nStartAction; if( Imp()->IsAccessible() ) Imp()->FireAccessibleEvents(); } /****************************************************************************** |* |* ViewShell::ImplStartAction() |* |* Ersterstellung MA 25. Jul. 94 |* Letzte Aenderung MA 25. Jul. 94 |* ******************************************************************************/ void ViewShell::ImplStartAction() { bPaintWorks = sal_False; Imp()->StartAction(); } /****************************************************************************** |* |* ViewShell::ImplLockPaint(), ImplUnlockPaint() |* |* Ersterstellung MA 11. Jun. 96 |* Letzte Aenderung MA 11. Jun. 96 |* ******************************************************************************/ void ViewShell::ImplLockPaint() { if ( GetWin() && GetWin()->IsVisible() ) GetWin()->EnablePaint( sal_False ); //Auch die Controls abklemmen. Imp()->LockPaint(); } void ViewShell::ImplUnlockPaint( sal_Bool bVirDev ) { SET_CURR_SHELL( this ); if ( GetWin() && GetWin()->IsVisible() ) { if ( (bInSizeNotify || bVirDev ) && VisArea().HasArea() ) { //Refresh mit virtuellem Device um das Flackern zu verhindern. VirtualDevice *pVout = new VirtualDevice( *pOut ); pVout->SetMapMode( pOut->GetMapMode() ); Size aSize( VisArea().SSize() ); aSize.Width() += 20; aSize.Height()+= 20; if( pVout->SetOutputSize( aSize ) ) { GetWin()->EnablePaint( sal_True ); GetWin()->Validate(); Imp()->UnlockPaint(); pVout->SetLineColor( pOut->GetLineColor() ); pVout->SetFillColor( pOut->GetFillColor() ); // #i72754# start Pre/PostPaint encapsulation before pOut is changed to the buffering VDev const Region aRepaintRegion(VisArea().SVRect()); DLPrePaint2(aRepaintRegion); OutputDevice *pOld = pOut; pOut = pVout; Paint( VisArea().SVRect() ); pOut = pOld; pOut->DrawOutDev( VisArea().Pos(), aSize, VisArea().Pos(), aSize, *pVout ); // #i72754# end Pre/PostPaint encapsulation when pOut is back and content is painted DLPostPaint2(true); } else { Imp()->UnlockPaint(); GetWin()->EnablePaint( sal_True ); GetWin()->Invalidate( INVALIDATE_CHILDREN ); } delete pVout; } else { Imp()->UnlockPaint(); GetWin()->EnablePaint( sal_True ); GetWin()->Invalidate( INVALIDATE_CHILDREN ); } } else Imp()->UnlockPaint(); } /****************************************************************************** |* |* ViewShell::AddPaintRect() |* |* Ersterstellung MA ?? |* Letzte Aenderung MA 09. Feb. 97 |* ******************************************************************************/ sal_Bool ViewShell::AddPaintRect( const SwRect & rRect ) { sal_Bool bRet = sal_False; ViewShell *pSh = this; do { if( pSh->Imp() ) { if ( pSh->IsPreView() && pSh->GetWin() ) ::RepaintPagePreview( pSh, rRect ); else bRet |= pSh->Imp()->AddPaintRect( rRect );//swmod 080111 } pSh = (ViewShell*)pSh->GetNext(); } while ( pSh != this ); return bRet; } /****************************************************************************** |* |* ViewShell::InvalidateWindows() |* |* Ersterstellung MA ?? |* Letzte Aenderung MA 09. Feb. 97 |* ******************************************************************************/ void ViewShell::InvalidateWindows( const SwRect &rRect ) { if ( !Imp()->IsCalcLayoutProgress() ) { ViewShell *pSh = this; do { if ( pSh->GetWin() ) { if ( pSh->IsPreView() ) ::RepaintPagePreview( pSh, rRect ); else if ( pSh->VisArea().IsOver( rRect ) ) pSh->GetWin()->Invalidate( rRect.SVRect() ); } pSh = (ViewShell*)pSh->GetNext(); } while ( pSh != this ); } } /****************************************************************************** |* |* ViewShell::MakeVisible() |* |* Ersterstellung MA ?? |* Letzte Aenderung AMA 10. Okt. 95 |* ******************************************************************************/ void ViewShell::MakeVisible( const SwRect &rRect ) { if ( !VisArea().IsInside( rRect ) || IsScrollMDI( this, rRect ) || GetCareWin(*this) ) { if ( !IsViewLocked() ) { if( pWin ) { const SwFrm* pRoot = GetLayout(); int nLoopCnt = 3; long nOldH; do{ nOldH = pRoot->Frm().Height(); StartAction(); ScrollMDI( this, rRect, USHRT_MAX, USHRT_MAX ); EndAction(); } while( nOldH != pRoot->Frm().Height() && nLoopCnt-- ); //swmod 071108//swmod 071225 } #ifdef DBG_UTIL else { //MA: 04. Nov. 94, braucht doch keiner oder?? ASSERT( sal_False, "MakeVisible for printers is needed?" ); } #endif } } } /****************************************************************************** |* |* ViewShell::CareChildWindow() |* |* Ersterstellung AMA 10. Okt. 95 |* Letzte Aenderung AMA 10. Okt. 95 |* ******************************************************************************/ Window* ViewShell::CareChildWin(ViewShell& rVSh) { if(rVSh.pSfxViewShell) { const sal_uInt16 nId = SvxSearchDialogWrapper::GetChildWindowId(); SfxViewFrame* pVFrame = rVSh.pSfxViewShell->GetViewFrame(); const SfxChildWindow* pChWin = pVFrame->GetChildWindow( nId ); Window *pWin = pChWin ? pChWin->GetWindow() : NULL; if ( pWin && pWin->IsVisible() ) return pWin; } return NULL; } /****************************************************************************** |* |* ViewShell::GetPagePos() |* |* Ersterstellung MA ?? |* Letzte Aenderung MA 04. Aug. 93 |* ******************************************************************************/ Point ViewShell::GetPagePos( sal_uInt16 nPageNum ) const { return GetLayout()->GetPagePos( nPageNum ); } /****************************************************************************** |* |* ViewShell::GetNumPages() |* |* Ersterstellung MA ?? |* Letzte Aenderung MA 20. Apr. 94 |* ******************************************************************************/ sal_uInt16 ViewShell::GetNumPages() { //Es kann sein, das noch kein Layout existiert weil die Methode vom //Root-Ctor gerufen wird. return GetLayout() ? GetLayout()->GetPageNum() : 0; } sal_Bool ViewShell::IsDummyPage( sal_uInt16 nPageNum ) const { return GetLayout() ? GetLayout()->IsDummyPage( nPageNum ) : 0; } /************************************************************************* |* |* ViewShell::UpdateFlds() |* |* Ersterstellung BP 04.05.92 |* Beschreibung erzwingt ein Update fuer jedes Feld |* |* UpdateFlds benachrichtigt alle Felder mit pNewHt. |* Wenn pNewHt == 0 ist (default), wird der Feldtyp verschickt. |* *************************************************************************/ void ViewShell::UpdateFlds(sal_Bool bCloseDB) { SET_CURR_SHELL( this ); sal_Bool bCrsr = ISA(SwCrsrShell); if ( bCrsr ) ((SwCrsrShell*)this)->StartAction(); else StartAction(); GetDoc()->UpdateFlds(0, bCloseDB); if ( bCrsr ) ((SwCrsrShell*)this)->EndAction(); else EndAction(); } // update all charts, for that exists any table void ViewShell::UpdateAllCharts() { SET_CURR_SHELL( this ); // Start-/EndAction handled in the SwDoc-Method! GetDoc()->UpdateAllCharts(); } sal_Bool ViewShell::HasCharts() const { sal_Bool bRet = sal_False; const SwStartNode *pStNd; SwNodeIndex aIdx( *GetDoc()->GetNodes().GetEndOfAutotext(). StartOfSectionNode(), 1 ); while ( 0 != (pStNd = aIdx.GetNode().GetStartNode()) ) { aIdx++; const SwOLENode *pNd = aIdx.GetNode().GetOLENode(); if( pNd && pNd->GetChartTblName().Len() ) { bRet = sal_True; break; } } return bRet; } /************************************************************************* |* |* ViewShell::LayoutIdle() |* |* Ersterstellung MA 26. May. 92 |* Letzte Aenderung OG 19. Mar. 96 |* *************************************************************************/ void ViewShell::LayoutIdle() { #ifdef TCOVER //fuer TCV-Version: Ende der Startphase des Programmes TCovCall::Idle(); #endif if( !pOpt->IsIdle() || !GetWin() || ( Imp()->HasDrawView() && Imp()->GetDrawView()->IsDragObj() ) ) return; //Kein Idle wenn gerade gedruckt wird. ViewShell *pSh = this; do { if ( !pSh->GetWin() ) return; pSh = (ViewShell*)pSh->GetNext(); } while ( pSh != this ); SET_CURR_SHELL( this ); #ifdef DBG_UTIL // Wenn Test5 gedrueckt ist, wird der IdleFormatierer abgeknipst. if( pOpt->IsTest5() ) return; #endif { DBG_PROFSTART( LayoutIdle ); //Cache vorbereiten und restaurieren, damit er nicht versaut wird. SwSaveSetLRUOfst aSave( *SwTxtFrm::GetTxtCache(), SwTxtFrm::GetTxtCache()->GetCurMax() - 50 ); // #125243# there are lots of stacktraces indicating that Imp() returns NULL // this ViewShell seems to be invalid - but it's not clear why // this return is only a workaround! DBG_ASSERT(Imp(), "ViewShell already deleted?"); if(!Imp()) return; SwLayIdle aIdle( GetLayout(), Imp() ); DBG_PROFSTOP( LayoutIdle ); } } /************************************************************************* |* |* DOCUMENT COMPATIBILITY FLAGS |* *************************************************************************/ void lcl_InvalidateAllCntnt( ViewShell& rSh, sal_uInt8 nInv ) { sal_Bool bCrsr = rSh.ISA(SwCrsrShell); if ( bCrsr ) ((SwCrsrShell&)rSh).StartAction(); else rSh.StartAction(); rSh.GetLayout()->InvalidateAllCntnt( nInv ); if ( bCrsr ) ((SwCrsrShell&)rSh).EndAction(); else rSh.EndAction(); rSh.GetDoc()->SetModified(); } /** local method to invalidate/re-calculate positions of floating screen objects (Writer fly frame and drawing objects), which are anchored to paragraph or to character. OD 2004-03-16 #i11860# @author OD */ void lcl_InvalidateAllObjPos( ViewShell &_rSh ) { const bool bIsCrsrShell = _rSh.ISA(SwCrsrShell); if ( bIsCrsrShell ) static_cast(_rSh).StartAction(); else _rSh.StartAction(); _rSh.GetLayout()->InvalidateAllObjPos(); if ( bIsCrsrShell ) static_cast(_rSh).EndAction(); else _rSh.EndAction(); _rSh.GetDoc()->SetModified(); } void ViewShell::SetParaSpaceMax( bool bNew ) { IDocumentSettingAccess* pIDSA = getIDocumentSettingAccess(); if( pIDSA->get(IDocumentSettingAccess::PARA_SPACE_MAX) != bNew ) { SwWait aWait( *GetDoc()->GetDocShell(), true ); pIDSA->set(IDocumentSettingAccess::PARA_SPACE_MAX, bNew ); const sal_uInt8 nInv = INV_PRTAREA | INV_TABLE | INV_SECTION; lcl_InvalidateAllCntnt( *this, nInv ); } } void ViewShell::SetParaSpaceMaxAtPages( bool bNew ) { IDocumentSettingAccess* pIDSA = getIDocumentSettingAccess(); if( pIDSA->get(IDocumentSettingAccess::PARA_SPACE_MAX_AT_PAGES) != bNew ) { SwWait aWait( *GetDoc()->GetDocShell(), true ); pIDSA->set(IDocumentSettingAccess::PARA_SPACE_MAX_AT_PAGES, bNew ); const sal_uInt8 nInv = INV_PRTAREA | INV_TABLE | INV_SECTION; lcl_InvalidateAllCntnt( *this, nInv ); } } void ViewShell::SetTabCompat( bool bNew ) { IDocumentSettingAccess* pIDSA = getIDocumentSettingAccess(); if( pIDSA->get(IDocumentSettingAccess::TAB_COMPAT) != bNew ) { SwWait aWait( *GetDoc()->GetDocShell(), true ); pIDSA->set(IDocumentSettingAccess::TAB_COMPAT, bNew ); const sal_uInt8 nInv = INV_PRTAREA | INV_SIZE | INV_TABLE | INV_SECTION; lcl_InvalidateAllCntnt( *this, nInv ); } } void ViewShell::SetAddExtLeading( bool bNew ) { IDocumentSettingAccess* pIDSA = getIDocumentSettingAccess(); if ( pIDSA->get(IDocumentSettingAccess::ADD_EXT_LEADING) != bNew ) { SwWait aWait( *GetDoc()->GetDocShell(), true ); pIDSA->set(IDocumentSettingAccess::ADD_EXT_LEADING, bNew ); SwDrawModel* pTmpDrawModel = getIDocumentDrawModelAccess()->GetDrawModel(); if ( pTmpDrawModel ) pTmpDrawModel->SetAddExtLeading( bNew ); const sal_uInt8 nInv = INV_PRTAREA | INV_SIZE | INV_TABLE | INV_SECTION; lcl_InvalidateAllCntnt( *this, nInv ); } } void ViewShell::SetUseVirDev( bool bNewVirtual ) { IDocumentSettingAccess* pIDSA = getIDocumentSettingAccess(); if ( pIDSA->get(IDocumentSettingAccess::USE_VIRTUAL_DEVICE) != bNewVirtual ) { SwWait aWait( *GetDoc()->GetDocShell(), true ); // this sets the flag at the document and calls PrtDataChanged IDocumentDeviceAccess* pIDDA = getIDocumentDeviceAccess(); pIDDA->setReferenceDeviceType( bNewVirtual, true ); } } // OD 2004-02-16 #106629# - control, if paragraph and table spacing is added // at bottom of table cells void ViewShell::SetAddParaSpacingToTableCells( bool _bAddParaSpacingToTableCells ) { IDocumentSettingAccess* pIDSA = getIDocumentSettingAccess(); if ( pIDSA->get(IDocumentSettingAccess::ADD_PARA_SPACING_TO_TABLE_CELLS) != _bAddParaSpacingToTableCells ) { SwWait aWait( *GetDoc()->GetDocShell(), true ); pIDSA->set(IDocumentSettingAccess::ADD_PARA_SPACING_TO_TABLE_CELLS, _bAddParaSpacingToTableCells ); const sal_uInt8 nInv = INV_PRTAREA; lcl_InvalidateAllCntnt( *this, nInv ); } } // OD 06.01.2004 #i11859# - control, if former formatting of text lines with // proportional line spacing is used or not. void ViewShell::SetUseFormerLineSpacing( bool _bUseFormerLineSpacing ) { IDocumentSettingAccess* pIDSA = getIDocumentSettingAccess(); if ( pIDSA->get(IDocumentSettingAccess::OLD_LINE_SPACING) != _bUseFormerLineSpacing ) { SwWait aWait( *GetDoc()->GetDocShell(), true ); pIDSA->set(IDocumentSettingAccess::OLD_LINE_SPACING, _bUseFormerLineSpacing ); const sal_uInt8 nInv = INV_PRTAREA; lcl_InvalidateAllCntnt( *this, nInv ); } } // OD 2004-03-12 #i11860# - control, if former object positioning is used or not. void ViewShell::SetUseFormerObjectPositioning( bool _bUseFormerObjPos ) { IDocumentSettingAccess* pIDSA = getIDocumentSettingAccess(); if ( pIDSA->get(IDocumentSettingAccess::USE_FORMER_OBJECT_POS) != _bUseFormerObjPos ) { SwWait aWait( *GetDoc()->GetDocShell(), true ); pIDSA->set(IDocumentSettingAccess::USE_FORMER_OBJECT_POS, _bUseFormerObjPos ); lcl_InvalidateAllObjPos( *this ); } } // OD 2004-05-05 #i28701# void ViewShell::SetConsiderWrapOnObjPos( bool _bConsiderWrapOnObjPos ) { IDocumentSettingAccess* pIDSA = getIDocumentSettingAccess(); if ( pIDSA->get(IDocumentSettingAccess::CONSIDER_WRAP_ON_OBJECT_POSITION) != _bConsiderWrapOnObjPos ) { SwWait aWait( *GetDoc()->GetDocShell(), true ); pIDSA->set(IDocumentSettingAccess::CONSIDER_WRAP_ON_OBJECT_POSITION, _bConsiderWrapOnObjPos ); lcl_InvalidateAllObjPos( *this ); } } // --> FME #108724# void ViewShell::SetUseFormerTextWrapping( bool _bUseFormerTextWrapping ) { IDocumentSettingAccess* pIDSA = getIDocumentSettingAccess(); if ( pIDSA->get(IDocumentSettingAccess::USE_FORMER_TEXT_WRAPPING) != _bUseFormerTextWrapping ) { SwWait aWait( *GetDoc()->GetDocShell(), true ); pIDSA->set(IDocumentSettingAccess::USE_FORMER_TEXT_WRAPPING, _bUseFormerTextWrapping ); const sal_uInt8 nInv = INV_PRTAREA | INV_SIZE | INV_TABLE | INV_SECTION; lcl_InvalidateAllCntnt( *this, nInv ); } } // <-- // -> PB 2007-06-11 #i45491# void ViewShell::SetDoNotJustifyLinesWithManualBreak( bool _bDoNotJustifyLinesWithManualBreak ) { IDocumentSettingAccess* pIDSA = getIDocumentSettingAccess(); if ( pIDSA->get(IDocumentSettingAccess::DO_NOT_JUSTIFY_LINES_WITH_MANUAL_BREAK) != _bDoNotJustifyLinesWithManualBreak ) { SwWait aWait( *GetDoc()->GetDocShell(), true ); pIDSA->set(IDocumentSettingAccess::DO_NOT_JUSTIFY_LINES_WITH_MANUAL_BREAK, _bDoNotJustifyLinesWithManualBreak ); const sal_uInt8 nInv = INV_PRTAREA | INV_SIZE | INV_TABLE | INV_SECTION; lcl_InvalidateAllCntnt( *this, nInv ); } } // <-- /****************************************************************************** |* |* ViewShell::Reformat |* |* Ersterstellung BP ??? |* Letzte Aenderung MA 13. Feb. 98 |* ******************************************************************************/ void ViewShell::Reformat() { SwWait aWait( *GetDoc()->GetDocShell(), true ); // Wir gehen auf Nummer sicher: // Wir muessen die alten Fontinformationen wegschmeissen, // wenn die Druckeraufloesung oder der Zoomfaktor sich aendert. // Init() und Reformat() sind die sichersten Stellen. #ifdef FNTMET aFntMetList.Flush(); #else pFntCache->Flush( ); #endif if( GetLayout()->IsCallbackActionEnabled() ) { StartAction(); GetLayout()->InvalidateAllCntnt( INV_SIZE | INV_POS | INV_PRTAREA ); EndAction(); } } void ViewShell::ChgNumberDigits() { SwDrawModel* pTmpDrawModel = getIDocumentDrawModelAccess()->GetDrawModel(); if ( pTmpDrawModel ) pTmpDrawModel->ReformatAllTextObjects(); Reformat(); } /****************************************************************************** |* |* ViewShell::CalcLayout() |* Vollstaendige Formatierung von Layout und Inhalt. |* |* Ersterstellung MA 31. Jan. 94 |* Letzte Aenderung MA 08. Oct. 96 |* ******************************************************************************/ void ViewShell::CalcLayout() { SET_CURR_SHELL( this ); SwWait aWait( *GetDoc()->GetDocShell(), true ); //Cache vorbereiten und restaurieren, damit er nicht versaut wird. SwSaveSetLRUOfst aSaveLRU( *SwTxtFrm::GetTxtCache(), SwTxtFrm::GetTxtCache()->GetCurMax() - 50 ); //Progress einschalten wenn noch keiner Lauft. const sal_Bool bEndProgress = SfxProgress::GetActiveProgress( GetDoc()->GetDocShell() ) == 0; if ( bEndProgress ) { sal_uInt16 nEndPage = GetLayout()->GetPageNum(); nEndPage += nEndPage * 10 / 100; ::StartProgress( STR_STATSTR_REFORMAT, 0, nEndPage, GetDoc()->GetDocShell() ); } SwLayAction aAction( GetLayout(), Imp() ); aAction.SetPaint( sal_False ); aAction.SetStatBar( sal_True ); aAction.SetCalcLayout( sal_True ); aAction.SetReschedule( sal_True ); GetDoc()->LockExpFlds(); aAction.Action(); GetDoc()->UnlockExpFlds(); //Das SetNewFldLst() am Doc wurde unterbunden und muss nachgeholt //werden (siehe flowfrm.cxx, txtfld.cxx) if ( aAction.IsExpFlds() ) { aAction.Reset(); aAction.SetPaint( sal_False ); aAction.SetStatBar( sal_True ); aAction.SetReschedule( sal_True ); SwDocPosUpdate aMsgHnt( 0 ); GetDoc()->UpdatePageFlds( &aMsgHnt ); GetDoc()->UpdateExpFlds(NULL, true); aAction.Action(); } if ( VisArea().HasArea() ) InvalidateWindows( VisArea() ); if ( bEndProgress ) ::EndProgress( GetDoc()->GetDocShell() ); } /****************************************************************************** |* |* ViewShell::SetFirstVisPageInvalid() |* |* Ersterstellung MA 19. May. 94 |* Letzte Aenderung MA 19. May. 94 |* ******************************************************************************/ void ViewShell::SetFirstVisPageInvalid() { ViewShell *pSh = this; do { pSh->Imp()->SetFirstVisPageInvalid(); pSh = (ViewShell*)pSh->GetNext(); } while ( pSh != this ); } /****************************************************************************** |* |* ViewShell::SizeChgNotify() |* |* Ersterstellung MA ?? |* Letzte Aenderung MA 17. Sep. 96 |* ******************************************************************************/ void ViewShell::SizeChgNotify() { if ( !pWin ) bDocSizeChgd = sal_True; else if( ActionPend() || Imp()->IsCalcLayoutProgress() || bPaintInProgress ) { bDocSizeChgd = sal_True; if ( !Imp()->IsCalcLayoutProgress() && ISA( SwCrsrShell ) ) { const SwFrm *pCnt = ((SwCrsrShell*)this)->GetCurrFrm( sal_False ); const SwPageFrm *pPage; if ( pCnt && 0 != (pPage = pCnt->FindPageFrm()) ) { sal_uInt16 nVirtNum = pPage->GetVirtPageNum(); const SvxNumberType& rNum = pPage->GetPageDesc()->GetNumType(); String sDisplay = rNum.GetNumStr( nVirtNum ); PageNumNotify( this, pCnt->GetPhyPageNum(), nVirtNum, sDisplay ); } } } else { bDocSizeChgd = sal_False; ::SizeNotify( this, GetDocSize() ); } } /****************************************************************************** |* |* ViewShell::VisPortChgd() |* |* Ersterstellung MA ?? |* Letzte Aenderung MA 22. Jul. 96 |* ******************************************************************************/ void ViewShell::VisPortChgd( const SwRect &rRect) { ASSERT( GetWin(), "VisPortChgd ohne Window." ); if ( rRect == VisArea() ) return; #ifdef DBG_UTIL if ( bInEndAction ) { //Da Rescheduled doch schon wieder irgendwo einer? ASSERT( sal_False, "Scroll during an EndAction." ); } #endif //Ersteinmal die alte sichtbare Seite holen, dann braucht nacher nicht //lange gesucht werden. const SwFrm *pOldPage = Imp()->GetFirstVisPage(); const SwRect aPrevArea( VisArea() ); const sal_Bool bFull = aPrevArea.IsEmpty(); aVisArea = rRect; SetFirstVisPageInvalid(); //Wenn noch eine PaintRegion herumsteht und sich die VisArea geaendert hat, //so ist die PaintRegion spaetestens jetzt obsolete. Die PaintRegion kann //vom RootFrm::Paint erzeugt worden sein. if ( !bInEndAction && Imp()->GetRegion() && Imp()->GetRegion()->GetOrigin() != VisArea() ) Imp()->DelRegion(); SET_CURR_SHELL( this ); bool bScrolled = false; SwPostItMgr* pPostItMgr = GetPostItMgr(); if ( bFull ) GetWin()->Invalidate(); else { // Betrag ausrechnen, um den gescrolled werden muss. const long nXDiff = aPrevArea.Left() - VisArea().Left(); const long nYDiff = aPrevArea.Top() - VisArea().Top(); if( !nXDiff && !GetViewOptions()->getBrowseMode() && (!Imp()->HasDrawView() || !Imp()->GetDrawView()->IsGridVisible() ) ) { //Falls moeglich die Wiese nicht mit Scrollen. //Also linke und rechte Kante des Scrollbereiches auf die //Seiten begrenzen. const SwPageFrm *pPage = (SwPageFrm*)GetLayout()->Lower(); //swmod 071108//swmod 071225 if ( pPage->Frm().Top() > pOldPage->Frm().Top() ) pPage = (SwPageFrm*)pOldPage; SwRect aBoth( VisArea() ); aBoth.Union( aPrevArea ); const SwTwips nBottom = aBoth.Bottom(); SwTwips nMinLeft = LONG_MAX; SwTwips nMaxRight= 0; const SwTwips nSidebarWidth = pPostItMgr && pPostItMgr->ShowNotes() && pPostItMgr->HasNotes() ? pPostItMgr->GetSidebarWidth() + pPostItMgr->GetSidebarBorderWidth() : 0; const bool bBookMode = GetViewOptions()->IsViewLayoutBookMode(); while ( pPage && pPage->Frm().Top() <= nBottom ) { SwRect aPageRect( pPage->Frm() ); if ( bBookMode ) { const SwPageFrm& rFormatPage = static_cast(pPage)->GetFormatPage(); aPageRect.SSize() = rFormatPage.Frm().SSize(); } if ( aPageRect.IsOver( aBoth ) ) { // OD 12.02.2003 #i9719#, #105645# - consider new border // and shadow width const SwTwips nBorderWidth = GetOut()->PixelToLogic( Size( pPage->BorderPxWidth(), 0 ) ).Width(); const SwTwips nShadowWidth = GetOut()->PixelToLogic( Size( pPage->ShadowPxWidth(), 0 ) ).Width(); SwTwips nPageLeft = 0; SwTwips nPageRight = 0; switch ( pPage->SidebarPosition() ) { case sw::sidebarwindows::SIDEBAR_LEFT: { nPageLeft = aPageRect.Left() - nBorderWidth - nSidebarWidth; nPageRight = aPageRect.Right() + nBorderWidth + nShadowWidth; } break; case sw::sidebarwindows::SIDEBAR_RIGHT: { nPageLeft = aPageRect.Left() - nBorderWidth; nPageRight = aPageRect.Right() + nBorderWidth + nShadowWidth + nSidebarWidth; } break; case sw::sidebarwindows::SIDEBAR_NONE: // nothing to do break; } if( nPageLeft < nMinLeft ) nMinLeft = nPageLeft; if( nPageRight > nMaxRight ) nMaxRight = nPageRight; //Zus. auf die Zeichenobjekte abgleichen. //Einen Ofst beruecksichtigen, weil die Objekte u.U. //selektiert sind und die Henkel dann hinausstehen. if ( pPage->GetSortedObjs() ) { const long nOfst = GetOut()->PixelToLogic( Size(Imp()->GetDrawView()->GetMarkHdlSizePixel()/2,0)).Width(); for ( sal_uInt16 i = 0; i < pPage->GetSortedObjs()->Count(); ++i ) { SwAnchoredObject* pObj = (*pPage->GetSortedObjs())[i]; const Rectangle &rBound = pObj->GetObjRect().SVRect(); // OD 03.03.2003 #107927# - use correct datatype const SwTwips nL = Max( 0L, rBound.Left() - nOfst ); if ( nL < nMinLeft ) nMinLeft = nL; if( rBound.Right() + nOfst > nMaxRight ) nMaxRight = rBound.Right() + nOfst; } } } pPage = (SwPageFrm*)pPage->GetNext(); } Rectangle aRect( aPrevArea.SVRect() ); aRect.Left() = nMinLeft; aRect.Right() = nMaxRight; if( VisArea().IsOver( aPrevArea ) && !nLockPaint ) { bScrolled = true; aVisArea.Pos() = aPrevArea.Pos(); if ( SmoothScroll( nXDiff, nYDiff, &aRect ) ) return; aVisArea.Pos() = rRect.Pos(); } else GetWin()->Invalidate( aRect ); } else if ( !nLockPaint ) //Wird im UnLock erledigt { if( VisArea().IsOver( aPrevArea ) ) { bScrolled = true; aVisArea.Pos() = aPrevArea.Pos(); if ( SmoothScroll( nXDiff, nYDiff, 0 ) ) return; aVisArea.Pos() = rRect.Pos(); } else GetWin()->Invalidate(); } } Point aPt( VisArea().Pos() ); aPt.X() = -aPt.X(); aPt.Y() = -aPt.Y(); MapMode aMapMode( GetWin()->GetMapMode() ); aMapMode.SetOrigin( aPt ); GetWin()->SetMapMode( aMapMode ); if ( HasDrawView() ) { Imp()->GetDrawView()->VisAreaChanged( GetWin() ); Imp()->GetDrawView()->SetActualWin( GetWin() ); } GetWin()->Update(); // --> OD 2010-02-11 #i88070# if ( pPostItMgr ) { pPostItMgr->Rescale(); pPostItMgr->CalcRects(); pPostItMgr->LayoutPostIts(); } // <-- if ( !bScrolled && pPostItMgr && pPostItMgr->HasNotes() && pPostItMgr->ShowNotes() ) pPostItMgr->CorrectPositions(); if( Imp()->IsAccessible() ) Imp()->UpdateAccessible(); } /****************************************************************************** |* |* ViewShell::SmoothScroll() |* |* Ersterstellung MA 04. Jul. 96 |* Letzte Aenderung MA 25. Mar. 97 |* ******************************************************************************/ sal_Bool ViewShell::SmoothScroll( long lXDiff, long lYDiff, const Rectangle *pRect ) { const sal_uLong nColCnt = pOut->GetColorCount(); long lMult = 1, lMax = LONG_MAX; if ( nColCnt == 65536 ) { lMax = 7000; lMult = 2; } if ( nColCnt == 16777216 ) { lMax = 5000; lMult = 6; } else if ( nColCnt == 1 ) { lMax = 3000; lMult = 12; } // #i75172# isolated static conditions const bool bOnlyYScroll(!lXDiff && Abs(lYDiff) != 0 && Abs(lYDiff) < lMax); const bool bAllowedWithChildWindows(GetWin()->GetWindowClipRegionPixel(WINDOW_GETCLIPREGION_NOCHILDREN|WINDOW_GETCLIPREGION_NULL).IsNull()); // --> OD 2009-08-12 #i98766# - disable smooth scrolling for Mac port builds #ifdef QUARTZ const bool bSmoothScrollAllowed(false); (void) bOnlyYScroll; (void) bAllowedWithChildWindows; #else const bool bSmoothScrollAllowed(bOnlyYScroll && bEnableSmooth && GetViewOptions()->IsSmoothScroll() && bAllowedWithChildWindows); #endif // <- const bool bIAmCursorShell(ISA(SwCrsrShell)); (void) bIAmCursorShell; // #i75172# with selection on overlay, smooth scroll should be allowed with it const bool bAllowedForSelection(true || (bIAmCursorShell && !((SwCrsrShell*)this)->HasSelection())); // #i75172# with cursors on overlay, smooth scroll should be allowed with it const bool bAllowedForMultipleCursors(true || (bIAmCursorShell && ((SwCrsrShell*)this)->GetCrsrCnt() < 2)); if(bSmoothScrollAllowed && bAllowedForSelection && bAllowedForMultipleCursors) { Imp()->bStopSmooth = sal_False; const SwRect aOldVis( VisArea() ); //Virtuelles Device erzeugen und einstellen. const Size aPixSz = GetWin()->PixelToLogic(Size(1,1)); VirtualDevice *pVout = new VirtualDevice( *GetWin() ); pVout->SetLineColor( GetWin()->GetLineColor() ); pVout->SetFillColor( GetWin()->GetFillColor() ); MapMode aMapMode( GetWin()->GetMapMode() ); pVout->SetMapMode( aMapMode ); Size aSize( aVisArea.Width()+2*aPixSz.Width(), Abs(lYDiff)+(2*aPixSz.Height()) ); if ( pRect ) aSize.Width() = Min(aSize.Width(), pRect->GetWidth()+2*aPixSz.Width()); if ( pVout->SetOutputSize( aSize ) ) { nLockPaint++; //Ersteinmal alles neue in das VirDev Painten. SwRect aRect( VisArea() ); aRect.Height( aSize.Height() ); if ( pRect ) { aRect.Pos().X() = Max(aRect.Left(),pRect->Left()-aPixSz.Width()); aRect.Right( Min(aRect.Right()+2*aPixSz.Width(), pRect->Right()+aPixSz.Width())); } else aRect.SSize().Width() += 2*aPixSz.Width(); aRect.Pos().Y() = lYDiff < 0 ? aOldVis.Bottom() - aPixSz.Height() : aRect.Top() - aSize.Height() + aPixSz.Height(); aRect.Pos().X() = Max( 0L, aRect.Left()-aPixSz.Width() ); aRect.Pos() = GetWin()->PixelToLogic( GetWin()->LogicToPixel( aRect.Pos())); aRect.SSize()= GetWin()->PixelToLogic( GetWin()->LogicToPixel( aRect.SSize())); aVisArea = aRect; const Point aPt( -aRect.Left(), -aRect.Top() ); aMapMode.SetOrigin( aPt ); pVout->SetMapMode( aMapMode ); OutputDevice *pOld = pOut; pOut = pVout; { // #i75172# To get a clean repaint, a new ObjectContact is needed here. Without, the // repaint would not be correct since it would use the wrong DrawPage visible region. // This repaint IS about painting something currently outside the visible part (!). // For that purpose, AddWindowToPaintView is used which creates a new SdrPageViewWindow // and all the necessary stuff. It's not cheap, but necessary here. Alone because repaint // target really is NOT the current window. // Also will automatically NOT use PreRendering and overlay (since target is VirtualDevice) if(!HasDrawView()) MakeDrawView(); SdrView* pDrawView = GetDrawView(); pDrawView->AddWindowToPaintView(pVout); // clear pWin during DLPrePaint2 to get paint preparation for pOut, but set it again // immediately afterwards. There are many decisions in SW which imply that Printing // is used when pWin == 0 (wrong but widely used). Window* pOldWin = pWin; pWin = 0; DLPrePaint2(Region(aRect.SVRect())); pWin = pOldWin; // SW paint stuff PaintDesktop( aRect ); ViewShell::bLstAct = sal_True; GetLayout()->Paint( aRect ); ViewShell::bLstAct = sal_False; // end paint and destroy ObjectContact again DLPostPaint2(true); pDrawView->DeleteWindowFromPaintView(pVout); // temporary debug paint checking... static bool bDoSaveForVisualControl(false); if(bDoSaveForVisualControl) { const bool bMapModeWasEnabledVDev(pVout->IsMapModeEnabled()); pVout->EnableMapMode(false); const Bitmap aBitmap(pVout->GetBitmap(Point(), pVout->GetOutputSizePixel())); const String aTmpString(ByteString( "c:\\test.bmp" ), RTL_TEXTENCODING_UTF8); SvFileStream aNew(aTmpString, STREAM_WRITE|STREAM_TRUNC); WriteDIB(aBitmap, aNew, false, true); pVout->EnableMapMode(bMapModeWasEnabledVDev); } } pOut = pOld; aVisArea = aOldVis; //Jetzt Stueckchenweise schieben und die neuen Pixel aus dem //VirDev kopieren. // ?????????????????????? // or is it better to get the scrollfactor from the User // as option? // ?????????????????????? long lMaDelta = aPixSz.Height(); if ( Abs(lYDiff) > ( aVisArea.Height() / 3 ) ) lMaDelta *= 6; else lMaDelta *= 2; lMaDelta *= lMult; if ( lYDiff < 0 ) lMaDelta = -lMaDelta; long lDiff = lYDiff; while ( lDiff ) { long lScroll; if ( Imp()->bStopSmooth || Abs(lDiff) <= Abs(lMaDelta) ) { lScroll = lDiff; lDiff = 0; } else { lScroll = lMaDelta; lDiff -= lMaDelta; } const SwRect aTmpOldVis = VisArea(); aVisArea.Pos().Y() -= lScroll; aVisArea.Pos() = GetWin()->PixelToLogic( GetWin()->LogicToPixel( VisArea().Pos())); lScroll = aTmpOldVis.Top() - VisArea().Top(); if ( pRect ) { Rectangle aTmp( aTmpOldVis.SVRect() ); aTmp.Left() = pRect->Left(); aTmp.Right()= pRect->Right(); GetWin()->Scroll( 0, lScroll, aTmp, SCROLL_CHILDREN); } else GetWin()->Scroll( 0, lScroll, SCROLL_CHILDREN ); const Point aTmpPt( -VisArea().Left(), -VisArea().Top() ); MapMode aTmpMapMode( GetWin()->GetMapMode() ); aTmpMapMode.SetOrigin( aTmpPt ); GetWin()->SetMapMode( aTmpMapMode ); if ( Imp()->HasDrawView() ) Imp()->GetDrawView()->VisAreaChanged( GetWin() ); SetFirstVisPageInvalid(); if ( !Imp()->bStopSmooth ) { const bool bScrollDirectionIsUp(lScroll > 0); Imp()->aSmoothRect = VisArea(); if(bScrollDirectionIsUp) { Imp()->aSmoothRect.Bottom( VisArea().Top() + lScroll + aPixSz.Height()); } else { Imp()->aSmoothRect.Top( VisArea().Bottom() + lScroll - aPixSz.Height()); } Imp()->bSmoothUpdate = sal_True; GetWin()->Update(); Imp()->bSmoothUpdate = sal_False; if(!Imp()->bStopSmooth) { static bool bDoItOnPixels(true); if(bDoItOnPixels) { // start paint on logic base const Rectangle aTargetLogic(Imp()->aSmoothRect.SVRect()); DLPrePaint2(Region(aTargetLogic)); // get target rectangle in discrete pixels OutputDevice& rTargetDevice = mpTargetPaintWindow->GetTargetOutputDevice(); const Rectangle aTargetPixel(rTargetDevice.LogicToPixel(aTargetLogic)); // get source top-left in discrete pixels const Point aSourceTopLeft(pVout->LogicToPixel(aTargetLogic.TopLeft())); // switch off MapModes const bool bMapModeWasEnabledDest(rTargetDevice.IsMapModeEnabled()); const bool bMapModeWasEnabledSource(pVout->IsMapModeEnabled()); rTargetDevice.EnableMapMode(false); pVout->EnableMapMode(false); // copy content static bool bTestDirectToWindowPaint(false); if(bTestDirectToWindowPaint) { const bool bMapModeWasEnabledWin(GetWin()->IsMapModeEnabled()); GetWin()->EnableMapMode(false); GetWin()->DrawOutDev( aTargetPixel.TopLeft(), aTargetPixel.GetSize(), // dest aSourceTopLeft, aTargetPixel.GetSize(), // source *pVout); GetWin()->EnableMapMode(bMapModeWasEnabledWin); } rTargetDevice.DrawOutDev( aTargetPixel.TopLeft(), aTargetPixel.GetSize(), // dest aSourceTopLeft, aTargetPixel.GetSize(), // source *pVout); // restore MapModes rTargetDevice.EnableMapMode(bMapModeWasEnabledDest); pVout->EnableMapMode(bMapModeWasEnabledSource); // end paint on logoc base DLPostPaint2(true); } else { Rectangle aRectangle(Imp()->aSmoothRect.SVRect()); aRectangle.Left() -= aPixSz.Width(); aRectangle.Right() += aPixSz.Width(); aRectangle.Top() -= aPixSz.Height(); aRectangle.Bottom() += aPixSz.Height(); const Point aUpdateTopLeft(aRectangle.TopLeft()); const Size aUpdateSize(aRectangle.GetSize()); // #i75172# the part getting visible needs to be handled like a repaint. // For that, start with DLPrePaint2 and the correct Rectangle DLPrePaint2(Region(aRectangle)); static bool bTestDirectToWindowPaint(false); if(bTestDirectToWindowPaint) { GetWin()->DrawOutDev(aUpdateTopLeft, aUpdateSize, aUpdateTopLeft, aUpdateSize, *pVout); } mpTargetPaintWindow->GetTargetOutputDevice().DrawOutDev(aUpdateTopLeft, aUpdateSize, aUpdateTopLeft, aUpdateSize, *pVout); // #i75172# Corret repaint end // Note: This also correcty creates the overlay, thus smooth scroll will // also be allowed now wth selection (see big IF above) DLPostPaint2(true); } } else --nLockPaint; } } delete pVout; GetWin()->Update(); if ( !Imp()->bStopSmooth ) --nLockPaint; SetFirstVisPageInvalid(); return sal_True; } delete pVout; } aVisArea.Pos().X() -= lXDiff; aVisArea.Pos().Y() -= lYDiff; if ( pRect ) GetWin()->Scroll( lXDiff, lYDiff, *pRect, SCROLL_CHILDREN); else GetWin()->Scroll( lXDiff, lYDiff, SCROLL_CHILDREN); return sal_False; } /****************************************************************************** |* |* ViewShell::PaintDesktop() |* |* Ersterstellung MA 16. Dec. 93 |* Letzte Aenderung MA 30. Nov. 95 |* ******************************************************************************/ void ViewShell::PaintDesktop( const SwRect &rRect ) { if ( !GetWin() && !GetOut()->GetConnectMetaFile() ) return; //Fuer den Drucker tun wir hier nix //Sonderfaelle abfangen, damit es nicht gar so ueberraschend aussieht. //Kann z.B. waehrend des Idle'ns zwischenzeitlich auftreten. //Die Rechtecke neben den Seiten muessen wir leider auf jedenfall Painten, //den diese werden spaeter beim VisPortChgd ausgespart. sal_Bool bBorderOnly = sal_False; const SwRootFrm *pRoot = GetLayout();//swmod 080305 if ( rRect.Top() > pRoot->Frm().Bottom() ) { const SwFrm *pPg = pRoot->Lower(); while ( pPg && pPg->GetNext() ) pPg = pPg->GetNext(); if ( !pPg || !pPg->Frm().IsOver( VisArea() ) ) bBorderOnly = sal_True; } const bool bBookMode = GetViewOptions()->IsViewLayoutBookMode(); SwRegionRects aRegion( rRect ); //mod #i6193: remove sidebar area to avoid flickering const SwPostItMgr* pPostItMgr = GetPostItMgr(); const SwTwips nSidebarWidth = pPostItMgr && pPostItMgr->HasNotes() && pPostItMgr->ShowNotes() ? pPostItMgr->GetSidebarWidth() + pPostItMgr->GetSidebarBorderWidth() : 0; if ( bBorderOnly ) { const SwFrm *pPage =pRoot->Lower(); //swmod 071108//swmod 071225 SwRect aLeft( rRect ), aRight( rRect ); while ( pPage ) { long nTmp = pPage->Frm().Left(); if ( nTmp < aLeft.Right() ) aLeft.Right( nTmp ); nTmp = pPage->Frm().Right(); if ( nTmp > aRight.Left() ) { aRight.Left( nTmp + nSidebarWidth ); } pPage = pPage->GetNext(); } aRegion.Remove( 0, aRegion.Count() ); if ( aLeft.HasArea() ) aRegion.Insert( aLeft, 0 ); if ( aRight.HasArea() ) aRegion.Insert( aRight, 1 ); } else { const SwFrm *pPage = Imp()->GetFirstVisPage(); const SwTwips nBottom = rRect.Bottom(); //const SwTwips nRight = rRect.Right(); while ( pPage && aRegion.Count() && (pPage->Frm().Top() <= nBottom) ) // PAGES01 && (pPage->Frm().Left() <= nRight)) { SwRect aPageRect( pPage->Frm() ); if ( bBookMode ) { const SwPageFrm& rFormatPage = static_cast(pPage)->GetFormatPage(); aPageRect.SSize() = rFormatPage.Frm().SSize(); } const bool bSidebarRight = static_cast(pPage)->SidebarPosition() == sw::sidebarwindows::SIDEBAR_RIGHT; aPageRect.Pos().X() -= bSidebarRight ? 0 : nSidebarWidth; aPageRect.SSize().Width() += nSidebarWidth; if ( aPageRect.IsOver( rRect ) ) aRegion -= aPageRect; pPage = pPage->GetNext(); } } if ( aRegion.Count() ) _PaintDesktop( aRegion ); } // PaintDesktop gesplittet, dieser Teil wird auch von PreViewPage benutzt void ViewShell::_PaintDesktop( const SwRegionRects &rRegion ) { // OD 2004-04-23 #116347# GetOut()->Push( PUSH_FILLCOLOR|PUSH_LINECOLOR ); GetOut()->SetLineColor(); for ( sal_uInt16 i = 0; i < rRegion.Count(); ++i ) { const Rectangle aRectangle(rRegion[i].SVRect()); // #i93170# // Here we have a real Problem. On the one hand we have the buffering for paint // and overlay which needs an embracing pair of DLPrePaint2/DLPostPaint2 calls, // on the other hand the MapMode is not set correctly when this code is executed. // This is done in the users of this method, for each SWpage before painting it. // Since the MapMode is not correct here, the call to DLPostPaint2 will paint // existing FormControls due to the current MapMode. // // There are basically three solutions for this: // // (1) Set the MapMode correct, move the background painting to the users of // this code // // (2) Do no DLPrePaint2/DLPostPaint2 here; no SdrObjects are allowed to lie in // the desktop region. Disadvantage: the desktop will not be part of the // buffers, e.g. overlay. Thus, as soon as overlay will be used over the // desktop, it will not work. // // (3) expand DLPostPaint2 with a flag to signal if FormControl paints shall // be done or not // // Currently, (3) will be the best possible solution. It will keep overlay and // buffering intact and work without MapMode for single pages. In the medium // to long run, (1) will need to be used and the bool bPaintFormLayer needs // to be removed again // #i68597# inform Drawinglayer about display change DLPrePaint2(Region(aRectangle)); // #i75172# needed to move line/Fill color setters into loop since DLPrePaint2 // may exchange GetOut(), that's it's purpose. This happens e.g. at print preview. GetOut()->SetFillColor( SwViewOption::GetAppBackgroundColor()); GetOut()->SetLineColor(); GetOut()->DrawRect(aRectangle); DLPostPaint2(false); } GetOut()->Pop(); } /****************************************************************************** |* |* ViewShell::CheckInvalidForPaint() |* |* Ersterstellung MA 19. May. 94 |* Letzte Aenderung MA 09. Jun. 94 |* ******************************************************************************/ sal_Bool ViewShell::CheckInvalidForPaint( const SwRect &rRect ) { if ( !GetWin() ) return sal_False; const SwPageFrm *pPage = Imp()->GetFirstVisPage(); const SwTwips nBottom = VisArea().Bottom(); const SwTwips nRight = VisArea().Right(); sal_Bool bRet = sal_False; while ( !bRet && pPage && !((pPage->Frm().Top() > nBottom) || (pPage->Frm().Left() > nRight))) { if ( pPage->IsInvalid() || pPage->IsInvalidFly() ) bRet = sal_True; pPage = (SwPageFrm*)pPage->GetNext(); } if ( bRet ) { //Start/EndAction wuerden hier leider nix helfen, weil das Paint vom //GUI 'reinkam und somit ein Clipping gesetzt ist gegen das wir nicht //nicht ankommen. //Ergo: Alles selbst machen (siehe ImplEndAction()) if ( Imp()->GetRegion() && Imp()->GetRegion()->GetOrigin() != VisArea()) Imp()->DelRegion(); SwLayAction aAction( GetLayout(), Imp() ); aAction.SetComplete( sal_False ); // We increment the action counter to avoid a recursive call of actions // e.g. from a SwFEShell::RequestObjectResize(..) in bug 95829. // A recursive call of actions is no good idea because the inner action // can't format frames which are locked by the outer action. This may // cause and endless loop. ++nStartAction; aAction.Action(); --nStartAction; SwRegionRects *pRegion = Imp()->GetRegion(); if ( pRegion && aAction.IsBrowseActionStop() ) { //Nur dann interessant, wenn sich im sichtbaren Bereich etwas //veraendert hat. sal_Bool bStop = sal_True; for ( sal_uInt16 i = 0; i < pRegion->Count(); ++i ) { const SwRect &rTmp = (*pRegion)[i]; if ( sal_False == (bStop = rTmp.IsOver( VisArea() )) ) break; } if ( bStop ) { Imp()->DelRegion(); pRegion = 0; } } if ( pRegion ) { //Erst Invert dann Compress, niemals andersherum! pRegion->Invert(); pRegion->Compress(); bRet = sal_False; if ( pRegion->Count() ) { SwRegionRects aRegion( rRect ); for ( sal_uInt16 i = 0; i < pRegion->Count(); ++i ) { const SwRect &rTmp = (*pRegion)[i]; if ( !rRect.IsInside( rTmp ) ) { InvalidateWindows( rTmp ); if ( rTmp.IsOver( VisArea() ) ) { aRegion -= rTmp; bRet = sal_True; } } } if ( bRet ) { for ( sal_uInt16 i = 0; i < aRegion.Count(); ++i ) GetWin()->Invalidate( aRegion[i].SVRect() ); if ( rRect != VisArea() ) { //rRect == VisArea ist der spezialfall fuer neu bzw. //Shift-Ctrl-R, dafuer sollte es nicht notwendig sein //das Rechteck nocheinmal in Dokumentkoordinaten v //vorzuhalten. if ( aInvalidRect.IsEmpty() ) aInvalidRect = rRect; else aInvalidRect.Union( rRect ); } } } else bRet = sal_False; Imp()->DelRegion(); } else bRet = sal_False; } return bRet; } /****************************************************************************** |* |* ViewShell::Paint() |* |* Ersterstellung MA ?? |* Letzte Aenderung MA 17. Sep. 96 |* ******************************************************************************/ void ViewShell::Paint(const Rectangle &rRect) { if ( nLockPaint ) { if ( Imp()->bSmoothUpdate ) { SwRect aTmp( rRect ); if ( !Imp()->aSmoothRect.IsInside( aTmp ) ) Imp()->bStopSmooth = sal_True; else { Imp()->aSmoothRect = aTmp; return; } } else return; } if ( SwRootFrm::IsInPaint() ) { //Waehrend der Ausgabe einer Seite beim Druckvorgang wird das //Paint gepuffert. SwPaintQueue::Add( this, SwRect( rRect ) ); return; } //MA 30. Jul. 95: fix(16787): mit !nStartAction versuche ich mal mich gegen //fehlerhaften Code an anderen Stellen zu wehren. Hoffentlich fuehrt das //nicht zu Problemen!? if ( bPaintWorks && !nStartAction ) { if( GetWin() && GetWin()->IsVisible() ) { SwRect aRect( rRect ); if ( bPaintInProgress ) //Schutz gegen doppelte Paints! { GetWin()->Invalidate( rRect ); return; } bPaintInProgress = sal_True; SET_CURR_SHELL( this ); SwRootFrm::SetNoVirDev( sal_True ); //Wir wollen nicht staendig hin und her Clippen, wir verlassen //uns darauf, das sich alle auf das Rechteck beschraeken und //brauchen das Clipping hier nur einmalig einkalkulieren. Das //ClipRect wird hier einmal entfernt und nicht Restauriert, denn //von aussen braucht es sowieso keiner mehr. //Nicht wenn wir ein MetaFile aufzeichnen. if( !GetOut()->GetConnectMetaFile() && GetOut()->IsClipRegion()) GetOut()->SetClipRegion(); if ( IsPreView() ) { //Falls sinnvoll gleich das alte InvalidRect verarbeiten bzw. //vernichten. if ( aRect.IsInside( aInvalidRect ) ) ResetInvalidRect(); ViewShell::bLstAct = sal_True; GetLayout()->Paint( aRect ); ViewShell::bLstAct = sal_False; } else { //SwSaveHdl *pSaveHdl = 0; //if ( Imp()->HasDrawView() ) // pSaveHdl = new SwSaveHdl( Imp() ); //Wenn eine der sichtbaren Seiten noch irgendetwas zum Repaint //angemeldet hat, so muessen Repaints ausgeloest werden. if ( !CheckInvalidForPaint( aRect ) ) { // --> OD 2009-08-12 #i101192# // start Pre/PostPaint encapsulation to avoid screen blinking const Region aRepaintRegion(aRect.SVRect()); DLPrePaint2(aRepaintRegion); // <-- PaintDesktop( aRect ); //Falls sinnvoll gleich das alte InvalidRect verarbeiten bzw. //vernichten. if ( aRect.IsInside( aInvalidRect ) ) ResetInvalidRect(); ViewShell::bLstAct = sal_True; GetLayout()->Paint( aRect ); ViewShell::bLstAct = sal_False; // --> OD 2009-08-12 #i101192# // end Pre/PostPaint encapsulation DLPostPaint2(true); // <-- } //delete pSaveHdl; } SwRootFrm::SetNoVirDev( sal_False ); bPaintInProgress = sal_False; UISizeNotify(); } } else { if ( aInvalidRect.IsEmpty() ) aInvalidRect = SwRect( rRect ); else aInvalidRect.Union( SwRect( rRect ) ); if ( bInEndAction && GetWin() ) { const Region aRegion(GetWin()->GetPaintRegion()); RectangleVector aRectangles; aRegion.GetRegionRectangles(aRectangles); for(RectangleVector::const_iterator aRectIter(aRectangles.begin()); aRectIter != aRectangles.end(); aRectIter++) { Imp()->AddPaintRect(*aRectIter); } //RegionHandle hHdl( aRegion.BeginEnumRects() ); //Rectangle aRect; //while ( aRegion.GetEnumRects( hHdl, aRect ) ) // Imp()->AddPaintRect( aRect ); //aRegion.EndEnumRects( hHdl ); } else if ( SfxProgress::GetActiveProgress( GetDoc()->GetDocShell() ) && GetOut() == GetWin() ) { // #i68597# const Region aDLRegion(rRect); DLPrePaint2(aDLRegion); // OD 2004-04-23 #116347# pOut->Push( PUSH_FILLCOLOR|PUSH_LINECOLOR ); pOut->SetFillColor( Imp()->GetRetoucheColor() ); pOut->SetLineColor(); pOut->DrawRect( rRect ); pOut->Pop(); // #i68597# DLPostPaint2(true); } } } /****************************************************************************** |* |* ViewShell::SetBrowseBorder() |* |* Ersterstellung AMA 20. Aug. 96 |* Letzte Aenderung AMA 20. Aug. 96 |* ******************************************************************************/ void ViewShell::SetBrowseBorder( const Size& rNew ) { if( rNew != aBrowseBorder ) { aBrowseBorder = rNew; if ( aVisArea.HasArea() ) CheckBrowseView( sal_False ); } } const Size& ViewShell::GetBrowseBorder() const { return aBrowseBorder; } sal_Int32 ViewShell::GetBrowseWidth() const { const SwPostItMgr* pPostItMgr = GetPostItMgr(); if ( pPostItMgr && pPostItMgr->HasNotes() && pPostItMgr->ShowNotes() ) { Size aBorder( aBrowseBorder ); aBorder.Width() += aBrowseBorder.Width(); aBorder.Width() += pPostItMgr->GetSidebarWidth(true) + pPostItMgr->GetSidebarBorderWidth(true); return aVisArea.Width() - GetOut()->PixelToLogic(aBorder).Width(); } else return aVisArea.Width() - 2 * GetOut()->PixelToLogic(aBrowseBorder).Width(); } /****************************************************************************** |* |* ViewShell::CheckBrowseView() |* |* Ersterstellung MA 04. Mar. 96 |* Letzte Aenderung MA 04. Jul. 96 |* ******************************************************************************/ void ViewShell::CheckBrowseView( sal_Bool bBrowseChgd ) { if ( !bBrowseChgd && !GetViewOptions()->getBrowseMode() ) return; SET_CURR_SHELL( this ); ASSERT( GetLayout(), "Layout not ready" ); // Wenn das Layout noch nicht einmal eine Hoehe hat, // ist sowieso nichts formatiert. // Dann eruebrigt sich die Invalidierung // Falsch, z.B. beim Anlegen einer neuen View wird der Inhalt eingef?gt // und formatiert (trotz einer leeren VisArea). Hier muessen deshalb // die Seiten zur Formatierung angeregt werden. if( !GetLayout()->Frm().Height() ) { SwFrm* pPage = GetLayout()->Lower(); while( pPage ) { pPage->_InvalidateSize(); pPage = pPage->GetNext(); } return; } LockPaint(); StartAction(); SwPageFrm *pPg = (SwPageFrm*)GetLayout()->Lower(); do { pPg->InvalidateSize(); pPg->_InvalidatePrt(); pPg->InvaPercentLowers(); if ( bBrowseChgd ) { pPg->PrepareHeader(); pPg->PrepareFooter(); } pPg = (SwPageFrm*)pPg->GetNext(); } while ( pPg ); // Wenn sich die Groessenverhaeltnise im BrowseModus aendern, // muss die Position und PrtArea der Cntnt- und Tab-Frames invalidiert werden. sal_uInt8 nInv = INV_PRTAREA | INV_TABLE | INV_POS; // Beim BrowseModus-Wechsel benoetigen die CntntFrms // wg. der Drucker/Bildschirmformatierung eine Size-Invalidierung if( bBrowseChgd ) nInv |= INV_SIZE | INV_DIRECTION; GetLayout()->InvalidateAllCntnt( nInv ); SwFrm::CheckPageDescs( (SwPageFrm*)GetLayout()->Lower() ); EndAction(); UnlockPaint(); } /************************************************************************* |* |* ViewShell::GetLayout() |* ViewShell::GetNodes() |* |* Ersterstellung OK 26. May. 92 |* Letzte Aenderung MA 16. Sep. 93 |* *************************************************************************/ SwRootFrm *ViewShell::GetLayout() const { return pLayout.get(); //swmod 080116 } /***********************************************************************/ OutputDevice& ViewShell::GetRefDev() const { OutputDevice* pTmpOut = 0; if ( GetWin() && GetViewOptions()->getBrowseMode() && !GetViewOptions()->IsPrtFormat() ) pTmpOut = GetWin(); else if ( 0 != mpTmpRef ) pTmpOut = mpTmpRef; else pTmpOut = GetDoc()->getReferenceDevice( true ); return *pTmpOut; } const SwNodes& ViewShell::GetNodes() const { return pDoc->GetNodes(); } void ViewShell::DrawSelChanged() { } Size ViewShell::GetDocSize() const { Size aSz; const SwRootFrm* pRoot = GetLayout(); if( pRoot ) aSz = pRoot->Frm().SSize(); return aSz; } SfxItemPool& ViewShell::GetAttrPool() { return GetDoc()->GetAttrPool(); } /****************************************************************************** |* |* ViewShell::ApplyViewOptions(), ImplApplyViewOptions() |* |* Ersterstellung ?? |* Letzte Aenderung MA 03. Mar. 98 |* ******************************************************************************/ void ViewShell::ApplyViewOptions( const SwViewOption &rOpt ) { ViewShell *pSh = this; do { pSh->StartAction(); pSh = (ViewShell*)pSh->GetNext(); } while ( pSh != this ); ImplApplyViewOptions( rOpt ); // swmod 080115 // With one layout per view it is not longer necessary // to sync these "layout related" view options // But as long as we have to disable "multiple layout" pSh = (ViewShell*)this->GetNext(); while ( pSh != this ) { SwViewOption aOpt( *pSh->GetViewOptions() ); aOpt.SetFldName( rOpt.IsFldName() ); aOpt.SetShowHiddenField( rOpt.IsShowHiddenField() ); aOpt.SetShowHiddenPara( rOpt.IsShowHiddenPara() ); aOpt.SetShowHiddenChar( rOpt.IsShowHiddenChar() ); aOpt.SetViewLayoutBookMode( rOpt.IsViewLayoutBookMode() ); aOpt.SetViewLayoutColumns( rOpt.GetViewLayoutColumns() ); aOpt.SetPostIts(rOpt.IsPostIts()); if ( !(aOpt == *pSh->GetViewOptions()) ) pSh->ImplApplyViewOptions( aOpt ); pSh = (ViewShell*)pSh->GetNext(); } // End of disabled multiple window pSh = this; do { pSh->EndAction(); pSh = (ViewShell*)pSh->GetNext(); } while ( pSh != this ); } void ViewShell::ImplApplyViewOptions( const SwViewOption &rOpt ) { if (*pOpt == rOpt) return; Window *pMyWin = GetWin(); if( !pMyWin ) { ASSERT( pMyWin, "ViewShell::ApplyViewOptions: no window" ); return; } SET_CURR_SHELL( this ); sal_Bool bReformat = sal_False; if( pOpt->IsShowHiddenField() != rOpt.IsShowHiddenField() ) { ((SwHiddenTxtFieldType*)pDoc->GetSysFldType( RES_HIDDENTXTFLD ))-> SetHiddenFlag( !rOpt.IsShowHiddenField() ); bReformat = sal_True; } if ( pOpt->IsShowHiddenPara() != rOpt.IsShowHiddenPara() ) { SwHiddenParaFieldType* pFldType = (SwHiddenParaFieldType*)GetDoc()-> GetSysFldType(RES_HIDDENPARAFLD); if( pFldType && pFldType->GetDepends() ) { SwMsgPoolItem aHnt( RES_HIDDENPARA_PRINT ); pFldType->ModifyNotification( &aHnt, 0); } bReformat = sal_True; } if ( !bReformat && pOpt->IsShowHiddenChar() != rOpt.IsShowHiddenChar() ) { bReformat = GetDoc()->ContainsHiddenChars(); } // bReformat wird sal_True, wenn ... // - Feldnamen anzeigen oder nicht ... // ( - SwEndPortion muessen _nicht_ mehr generiert werden. ) // - Das Window ist natuerlich was ganz anderes als der Drucker... bReformat = bReformat || pOpt->IsFldName() != rOpt.IsFldName(); // Der Mapmode wird veraendert, Minima/Maxima werden von der UI beachtet if( pOpt->GetZoom() != rOpt.GetZoom() && !IsPreView() ) { MapMode aMode( pMyWin->GetMapMode() ); Fraction aNewFactor( rOpt.GetZoom(), 100 ); aMode.SetScaleX( aNewFactor ); aMode.SetScaleY( aNewFactor ); pMyWin->SetMapMode( aMode ); // Wenn kein ReferenzDevice (Drucker) zum Formatieren benutzt wird, // sondern der Bildschirm, muss bei Zoomfaktoraenderung neu formatiert // werden. if( pOpt->getBrowseMode() ) bReformat = sal_True; } bool bBrowseModeChanged = false; if( pOpt->getBrowseMode() != rOpt.getBrowseMode() ) { bBrowseModeChanged = true; bReformat = sal_True; } else if( pOpt->getBrowseMode() && pOpt->IsPrtFormat() != rOpt.IsPrtFormat() ) bReformat = sal_True; if ( HasDrawView() || rOpt.IsGridVisible() ) { if ( !HasDrawView() ) MakeDrawView(); SwDrawView *pDView = Imp()->GetDrawView(); if ( pDView->IsDragStripes() != rOpt.IsCrossHair() ) pDView->SetDragStripes( rOpt.IsCrossHair() ); if ( pDView->IsGridSnap() != rOpt.IsSnap() ) pDView->SetGridSnap( rOpt.IsSnap() ); if ( pDView->IsGridVisible() != rOpt.IsGridVisible() ) pDView->SetGridVisible( rOpt.IsGridVisible() ); const Size &rSz = rOpt.GetSnapSize(); pDView->SetGridCoarse( rSz ); const Size aFSize ( rSz.Width() ? rSz.Width() / (rOpt.GetDivisionX()+1) : 0, rSz.Height()? rSz.Height()/ (rOpt.GetDivisionY()+1) : 0); pDView->SetGridFine( aFSize ); Fraction aSnGrWdtX(rSz.Width(), rOpt.GetDivisionX() + 1); Fraction aSnGrWdtY(rSz.Height(), rOpt.GetDivisionY() + 1); pDView->SetSnapGridWidth( aSnGrWdtX, aSnGrWdtY ); if ( pOpt->IsSolidMarkHdl() != rOpt.IsSolidMarkHdl() ) pDView->SetSolidMarkHdl( rOpt.IsSolidMarkHdl() ); // it's a JOE interface ! if ( pOpt->IsBigMarkHdl() != rOpt.IsBigMarkHdl() ) pDView->SetMarkHdlSizePixel(rOpt.IsBigMarkHdl() ? 9 : 7); } sal_Bool bOnlineSpellChgd = pOpt->IsOnlineSpell() != rOpt.IsOnlineSpell(); *pOpt = rOpt; // Erst jetzt werden die Options uebernommen. pOpt->SetUIOptions(rOpt); pDoc->set(IDocumentSettingAccess::HTML_MODE, 0 != ::GetHtmlMode(pDoc->GetDocShell())); if( bBrowseModeChanged ) { // --> FME 2005-03-16 #i44963# Good occasion to check if page sizes in // page descriptions are still set to (LONG_MAX, LONG_MAX) (html import) pDoc->CheckDefaultPageFmt(); // <-- CheckBrowseView( sal_True ); } pMyWin->Invalidate(); if ( bReformat ) { // Es hilft alles nichts, wir muessen an alle CntntFrms ein // Prepare verschicken, wir formatieren neu: StartAction(); Reformat(); EndAction(); } if( bOnlineSpellChgd ) { ViewShell *pSh = (ViewShell*)this->GetNext(); sal_Bool bOnlineSpl = rOpt.IsOnlineSpell(); while( pSh != this ) { pSh->pOpt->SetOnlineSpell( bOnlineSpl ); Window *pTmpWin = pSh->GetWin(); if( pTmpWin ) pTmpWin->Invalidate(); pSh = (ViewShell*)pSh->GetNext(); } } } /****************************************************************************** |* |* ViewShell::SetUIOptions() |* |* Ersterstellung OS 29.07.96 |* Letzte Aenderung OS 29.07.96 |* ******************************************************************************/ void ViewShell::SetUIOptions( const SwViewOption &rOpt ) { pOpt->SetUIOptions(rOpt); //the API-Flag of the view options is set but never reset //it is required to set scroll bars in readonly documents if(rOpt.IsStarOneSetting()) pOpt->SetStarOneSetting(sal_True); pOpt->SetSymbolFont(rOpt.GetSymbolFont()); } /****************************************************************************** |* |* ViewShell::SetReadonly() |* |* Ersterstellung OS 05.09.96 |* Letzte Aenderung MA 12. Feb. 97 |* ******************************************************************************/ void ViewShell::SetReadonlyOption(sal_Bool bSet) { //JP 01.02.99: bei ReadOnly Flag richtig abfragen und ggfs. neu // formatieren; Bug 61335 // Schalten wir gerade von Readonly auf Bearbeiten um? if( bSet != pOpt->IsReadonly() ) { // damit die Flags richtig erfragt werden koennen. pOpt->SetReadonly( sal_False ); sal_Bool bReformat = pOpt->IsFldName(); pOpt->SetReadonly( bSet ); if( bReformat ) { StartAction(); Reformat(); if ( GetWin() ) GetWin()->Invalidate(); EndAction(); } else if ( GetWin() ) GetWin()->Invalidate(); if( Imp()->IsAccessible() ) Imp()->InvalidateAccessibleEditableState( sal_False ); } } /* -----------------28.08.2003 15:45----------------- --------------------------------------------------*/ void ViewShell::SetPDFExportOption(sal_Bool bSet) { if( bSet != pOpt->IsPDFExport() ) { if( bSet && pOpt->getBrowseMode() ) pOpt->SetPrtFormat( sal_True ); pOpt->SetPDFExport(bSet); } } /* -----------------------------2002/07/31 17:06------------------------------ ---------------------------------------------------------------------------*/ void ViewShell::SetReadonlySelectionOption(sal_Bool bSet) { if( bSet != pOpt->IsSelectionInReadonly() ) { pOpt->SetSelectionInReadonly(bSet); } } /****************************************************************************** |* |* ViewShell::SetPrtFormatOption() |* |* Ersterstellung AMA 10. Sep. 97 |* Letzte Aenderung AMA 10. Sep. 97 |* ******************************************************************************/ void ViewShell::SetPrtFormatOption( sal_Bool bSet ) { pOpt->SetPrtFormat( bSet ); } /****************************************************************************** |* |* ViewShell::UISizeNotify() |* |* Ersterstellung MA 14. Jan. 97 |* Letzte Aenderung MA 14. Jan. 97 |* ******************************************************************************/ void ViewShell::UISizeNotify() { if ( bDocSizeChgd ) { bDocSizeChgd = sal_False; sal_Bool bOld = bInSizeNotify; bInSizeNotify = sal_True; ::SizeNotify( this, GetDocSize() ); bInSizeNotify = bOld; } } void ViewShell::SetRestoreActions(sal_uInt16 nSet) { DBG_ASSERT(!GetRestoreActions()||!nSet, "mehrfaches Restore der Actions ?"); Imp()->SetRestoreActions(nSet); } sal_uInt16 ViewShell::GetRestoreActions() const { return Imp()->GetRestoreActions(); } sal_Bool ViewShell::IsNewLayout() const { return GetLayout()->IsNewLayout(); } uno::Reference< ::com::sun::star::accessibility::XAccessible > ViewShell::CreateAccessible() { uno::Reference< ::com::sun::star::accessibility::XAccessible > xAcc; // We require a layout and an XModel to be accessible. ASSERT( pLayout, "no layout, no access" ); ASSERT( GetWin(), "no window, no access" ); if( pDoc->GetCurrentViewShell() && GetWin() ) //swmod 071108 xAcc = Imp()->GetAccessibleMap().GetDocumentView(); return xAcc; } uno::Reference< ::com::sun::star::accessibility::XAccessible > ViewShell::CreateAccessiblePreview() { DBG_ASSERT( IsPreView(), "Can't create accessible preview for non-preview ViewShell" ); // We require a layout and an XModel to be accessible. ASSERT( pLayout, "no layout, no access" ); ASSERT( GetWin(), "no window, no access" ); // OD 15.01.2003 #103492# - add condition if ( IsPreView() && GetLayout()&& GetWin() ) { // OD 14.01.2003 #103492# - adjustment for new method signature return Imp()->GetAccessibleMap().GetDocumentPreview( PagePreviewLayout()->maPrevwPages, GetWin()->GetMapMode().GetScaleX(), GetLayout()->GetPageByPageNum( PagePreviewLayout()->mnSelectedPageNum ), PagePreviewLayout()->maWinSize ); //swmod 080305 } return NULL; } void ViewShell::InvalidateAccessibleFocus() { if( Imp()->IsAccessible() ) Imp()->GetAccessibleMap().InvalidateFocus(); } /** invalidate CONTENT_FLOWS_FROM/_TO relation for paragraphs OD 2005-12-01 #i27138# @author OD */ void ViewShell::InvalidateAccessibleParaFlowRelation( const SwTxtFrm* _pFromTxtFrm, const SwTxtFrm* _pToTxtFrm ) { if ( GetLayout() && GetLayout()->IsAnyShellAccessible() ) { Imp()->_InvalidateAccessibleParaFlowRelation( _pFromTxtFrm, _pToTxtFrm ); } } /** invalidate text selection for paragraphs OD 2005-12-12 #i27301# @author OD */ void ViewShell::InvalidateAccessibleParaTextSelection() { if ( GetLayout() && GetLayout()->IsAnyShellAccessible() ) { Imp()->_InvalidateAccessibleParaTextSelection(); } } /** invalidate attributes for paragraphs OD 2009-01-06 #i88069# @author OD */ void ViewShell::InvalidateAccessibleParaAttrs( const SwTxtFrm& rTxtFrm ) { if ( GetLayout() && GetLayout()->IsAnyShellAccessible() ) { Imp()->_InvalidateAccessibleParaAttrs( rTxtFrm ); } } SwAccessibleMap* ViewShell::GetAccessibleMap() { if ( Imp()->IsAccessible() ) { return &(Imp()->GetAccessibleMap()); } return 0; } /* -----------------------------06.05.2002 13:23------------------------------ ---------------------------------------------------------------------------*/ void ViewShell::ApplyAccessiblityOptions(SvtAccessibilityOptions& rAccessibilityOptions) { if(pOpt->IsPagePreview() && !rAccessibilityOptions.GetIsForPagePreviews()) { pAccOptions->SetAlwaysAutoColor(sal_False); pAccOptions->SetStopAnimatedGraphics(sal_False); pAccOptions->SetStopAnimatedText(sal_False); } else { pAccOptions->SetAlwaysAutoColor(rAccessibilityOptions.GetIsAutomaticFontColor()); pAccOptions->SetStopAnimatedGraphics(! rAccessibilityOptions.GetIsAllowAnimatedGraphics()); pAccOptions->SetStopAnimatedText(! rAccessibilityOptions.GetIsAllowAnimatedText()); // --> FME 2004-06-29 #114856# Formular view // Always set this option, not only if document is read-only: pOpt->SetSelectionInReadonly(rAccessibilityOptions.IsSelectionInReadonly()); } } ShellResource* ViewShell::GetShellRes() { return pShellRes; } void ViewShell::SetCareWin( Window* pNew ) { pCareWindow = pNew; } sal_uInt16 ViewShell::GetPageCount() const { return GetLayout() ? GetLayout()->GetPageNum() : 1; } const Size ViewShell::GetPageSize( sal_uInt16 nPageNum, bool bSkipEmptyPages ) const { Size aSize; const SwRootFrm* pTmpRoot = GetLayout(); if( pTmpRoot && nPageNum ) { const SwPageFrm* pPage = static_cast (pTmpRoot->Lower()); while( --nPageNum && pPage->GetNext() ) pPage = static_cast( pPage->GetNext() ); if( !bSkipEmptyPages && pPage->IsEmptyPage() && pPage->GetNext() ) pPage = static_cast( pPage->GetNext() ); aSize = pPage->Frm().SSize(); } return aSize; } // --> FME 2004-06-15 #i12836# enhanced pdf export sal_Int32 ViewShell::GetPageNumAndSetOffsetForPDF( OutputDevice& rOut, const SwRect& rRect ) const { ASSERT( GetLayout(), "GetPageNumAndSetOffsetForPDF assumes presence of layout" ) sal_Int32 nRet = -1; // --> FME 2005-01-07 #i40059# Position out of bounds: SwRect aRect( rRect ); aRect.Pos().X() = Max( aRect.Left(), GetLayout()->Frm().Left() ); // <-- const SwPageFrm* pPage = GetLayout()->GetPageAtPos( aRect.Center() ); if ( pPage ) { ASSERT( pPage, "GetPageNumAndSetOffsetForPDF: No page found" ) Point aOffset( pPage->Frm().Pos() ); aOffset.X() = -aOffset.X(); aOffset.Y() = -aOffset.Y(); MapMode aMapMode( rOut.GetMapMode() ); aMapMode.SetOrigin( aOffset ); rOut.SetMapMode( aMapMode ); nRet = pPage->GetPhyPageNum() - 1; } return nRet; } // <-- // --> PB 2007-05-30 #146850# const BitmapEx& ViewShell::GetReplacementBitmap( bool bIsErrorState ) { BitmapEx** ppRet; sal_uInt16 nResId = 0, nHCResId = 0; if( bIsErrorState ) { ppRet = &pErrorBmp; nResId = RID_GRAPHIC_ERRORBMP; nHCResId = RID_GRAPHIC_ERRORBMP_HC; } else { ppRet = &pReplaceBmp; nResId = RID_GRAPHIC_REPLACEBMP; nHCResId = RID_GRAPHIC_REPLACEBMP_HC; } if( !*ppRet ) { sal_uInt16 nBmpResId = Application::GetSettings().GetStyleSettings().GetHighContrastMode() ? nHCResId : nResId; *ppRet = new BitmapEx( SW_RES( nBmpResId ) ); } return **ppRet; } void ViewShell::DeleteReplacementBitmaps() { DELETEZ( pErrorBmp ); DELETEZ( pReplaceBmp ); } // <-- SwPostItMgr* ViewShell::GetPostItMgr() { SwView* pView = GetDoc()->GetDocShell() ? GetDoc()->GetDocShell()->GetView() : 0; if ( pView ) return pView->GetPostItMgr(); return 0; } /* * Document Interface Access */ const IDocumentSettingAccess* ViewShell::getIDocumentSettingAccess() const { return pDoc; } IDocumentSettingAccess* ViewShell::getIDocumentSettingAccess() { return pDoc; } const IDocumentDeviceAccess* ViewShell::getIDocumentDeviceAccess() const { return pDoc; } IDocumentDeviceAccess* ViewShell::getIDocumentDeviceAccess() { return pDoc; } const IDocumentMarkAccess* ViewShell::getIDocumentMarkAccess() const { return pDoc->getIDocumentMarkAccess(); } IDocumentMarkAccess* ViewShell::getIDocumentMarkAccess() { return pDoc->getIDocumentMarkAccess(); } const IDocumentDrawModelAccess* ViewShell::getIDocumentDrawModelAccess() const { return pDoc; } IDocumentDrawModelAccess* ViewShell::getIDocumentDrawModelAccess() { return pDoc; } const IDocumentRedlineAccess* ViewShell::getIDocumentRedlineAccess() const { return pDoc; } IDocumentRedlineAccess* ViewShell::getIDocumentRedlineAccess() { return pDoc; } const IDocumentLayoutAccess* ViewShell::getIDocumentLayoutAccess() const { return pDoc; } IDocumentLayoutAccess* ViewShell::getIDocumentLayoutAccess() { return pDoc; } const IDocumentFieldsAccess* ViewShell::getIDocumentFieldsAccess() const { return pDoc; } IDocumentContentOperations* ViewShell::getIDocumentContentOperations() { return pDoc; } IDocumentStylePoolAccess* ViewShell::getIDocumentStylePoolAccess() { return pDoc; } const IDocumentStatistics* ViewShell::getIDocumentStatistics() const { return pDoc; } IDocumentUndoRedo & ViewShell::GetIDocumentUndoRedo() { return pDoc->GetIDocumentUndoRedo(); } IDocumentUndoRedo const& ViewShell::GetIDocumentUndoRedo() const { return pDoc->GetIDocumentUndoRedo(); } // --> OD 2007-11-14 #i83479# const IDocumentListItems* ViewShell::getIDocumentListItemsAccess() const { return pDoc; } const IDocumentOutlineNodes* ViewShell::getIDocumentOutlineNodesAccess() const { return pDoc; } // <--