/************************************************************** * * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. * *************************************************************/ // MARKER(update_precomp.py): autogen include statement, do not remove #include "precompiled_sw.hxx" #include #include #include "uitool.hxx" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "view.hxx" #include "wrtsh.hxx" #include "basesh.hxx" #include "cmdid.h" #include "viewopt.hxx" #include "tabcol.hxx" #include "frmfmt.hxx" // FrameFormat #include "pagedesc.hxx" // Aktuelles Seitenformat #include "wview.hxx" #include "fmtcol.hxx" #include "section.hxx" // -> #i23726# #include "ndtxt.hxx" #include "pam.hxx" // <- #i23726# #include using namespace ::com::sun::star; /*-------------------------------------------------------------------- Beschreibung: Debug-Methode --------------------------------------------------------------------*/ /*-------------------------------------------------------------------- Beschreibung: Columns eintueten --------------------------------------------------------------------*/ void lcl_FillSvxColumn(const SwFmtCol& rCol, sal_uInt16 nTotalWidth, SvxColumnItem& rColItem, long nDistance) { const SwColumns& rCols = rCol.GetColumns(); sal_uInt16 nWidth = 0; sal_Bool bOrtho = rCol.IsOrtho() && rCols.Count(); long nInnerWidth = 0; if( bOrtho ) { nInnerWidth = nTotalWidth; for ( sal_uInt16 i = 0; i < rCols.Count(); ++i ) { SwColumn* pCol = rCols[i]; nInnerWidth -= pCol->GetLeft() + pCol->GetRight(); } if( nInnerWidth < 0 ) nInnerWidth = 0; else nInnerWidth /= rCols.Count(); } for ( sal_uInt16 i = 0; i < rCols.Count(); ++i ) { SwColumn* pCol = rCols[i]; const sal_uInt16 nStart = sal_uInt16(pCol->GetLeft() + nWidth + nDistance); if( bOrtho ) nWidth = static_cast< sal_uInt16 >(nWidth + nInnerWidth + pCol->GetLeft() + pCol->GetRight()); else nWidth = static_cast< sal_uInt16 >(nWidth + rCol.CalcColWidth(i, nTotalWidth)); const sal_uInt16 nEnd = sal_uInt16(nWidth - pCol->GetRight() + nDistance); SvxColumnDescription aColDesc(nStart, nEnd, sal_True); rColItem.Append(aColDesc); } } /*-------------------------------------------------------------------- Beschreibung: ColumnItem in ColumnInfo ueberfuehren --------------------------------------------------------------------*/ void lcl_ConvertToCols(const SvxColumnItem& rColItem, sal_uInt16 nTotalWidth, SwFmtCol& rCols) { ASSERT( rCols.GetNumCols() == rColItem.Count(), "Column count mismatch" ); // #126939# ruler executes that change the columns shortly after the selection has changed // can result in a crash if(rCols.GetNumCols() != rColItem.Count()) return; sal_uInt16 nLeft = 0; SwTwips nSumAll= 0; // Summiere alle Spalten und Raender auf SwColumns& rArr = rCols.GetColumns(); // Tabcols der Reihe nach for( sal_uInt16 i=0; i < rColItem.Count()-1; ++i ) { DBG_ASSERT(rColItem[i+1].nStart >= rColItem[i].nEnd,"\201berlappende Spalten" ); sal_uInt16 nStart = static_cast< sal_uInt16 >(rColItem[i+1].nStart); sal_uInt16 nEnd = static_cast< sal_uInt16 >(rColItem[i].nEnd); if(nStart < nEnd) nStart = nEnd; const sal_uInt16 nDiff = nStart - nEnd; const sal_uInt16 nRight = nDiff / 2; sal_uInt16 nWidth = static_cast< sal_uInt16 >(rColItem[i].nEnd - rColItem[i].nStart); nWidth += nLeft + nRight; SwColumn* pCol = rArr[i]; pCol->SetWishWidth( sal_uInt16(long(rCols.GetWishWidth()) * long(nWidth) / long(nTotalWidth) )); pCol->SetLeft( nLeft ); pCol->SetRight( nRight ); nSumAll += pCol->GetWishWidth(); nLeft = nRight; } rArr[rColItem.Count()-1]->SetLeft( nLeft ); //Die Differenz aus der Gesamtwunschbreite und der Summe der bisher berechneten // Spalten und Raender sollte die Breite der letzten Spalte ergeben. rArr[rColItem.Count()-1]->SetWishWidth( rCols.GetWishWidth() - (sal_uInt16)nSumAll ); rCols.SetOrtho(sal_False, 0, 0 ); } /*-------------------------------------------------------------------- Beschreibung: Tabs loeschen --------------------------------------------------------------------*/ void lcl_EraseDefTabs(SvxTabStopItem& rTabStops) { // Def Tabs loeschen for ( sal_uInt16 i = 0; i < rTabStops.Count(); ) { // Hier auch den DefTab auf Null rausschmeissen if ( SVX_TAB_ADJUST_DEFAULT == rTabStops[i].GetAdjustment() || rTabStops[i].GetTabPos() == 0 ) { rTabStops.Remove(i); continue; } ++i; } } /*-------------------------------------------------------------------- Beschreibung: Seitenrand umdrehen --------------------------------------------------------------------*/ void SwView::SwapPageMargin(const SwPageDesc& rDesc, SvxLRSpaceItem& rLRSpace) { sal_uInt16 nPhyPage, nVirPage; GetWrtShell().GetPageNum( nPhyPage, nVirPage ); if ( rDesc.GetUseOn() == nsUseOnPage::PD_MIRROR && (nPhyPage % 2) == 0 ) { long nTmp = rLRSpace.GetRight(); rLRSpace.SetRight( rLRSpace.GetLeft() ); rLRSpace.SetLeft( nTmp ); } } /*-------------------------------------------------------------------- Beschreibung: Wenn der Rahmenrand verschoben wird, sollen die Spaltentrenner an der gleichen absoluten Position bleiben --------------------------------------------------------------------*/ void lcl_Scale(long& nVal, long nScale) { nVal *= nScale; nVal >>= 8; } void ResizeFrameCols(SwFmtCol& rCol, long nOldWidth, long nNewWidth, long nLeftDelta ) { SwColumns& rArr = rCol.GetColumns(); long nWishSum = (long)rCol.GetWishWidth(); long nWishDiff = (nWishSum * 100/nOldWidth * nNewWidth) / 100 - nWishSum; long nNewWishWidth = nWishSum + nWishDiff; if(nNewWishWidth > 0xffffl) { // wenn die Wunschbreite zu gross wird, dann muessen alle Werte passend skaliert werden long nScale = (0xffffl << 8)/ nNewWishWidth; for(sal_uInt16 i = 0; i < rArr.Count(); i++) { SwColumn* pCol = rArr.GetObject(i); long nVal = pCol->GetWishWidth(); lcl_Scale(nVal, nScale); pCol->SetWishWidth((sal_uInt16) nVal); nVal = pCol->GetLeft(); lcl_Scale(nVal, nScale); pCol->SetLeft((sal_uInt16) nVal); nVal = pCol->GetRight(); lcl_Scale(nVal, nScale); pCol->SetRight((sal_uInt16) nVal); } lcl_Scale(nNewWishWidth, nScale); lcl_Scale(nWishDiff, nScale); } rCol.SetWishWidth( (sal_uInt16) (nNewWishWidth) ); if( nLeftDelta >= 2 || nLeftDelta <= -2) rArr[0]->SetWishWidth(rArr[0]->GetWishWidth() + (sal_uInt16)nWishDiff); else rArr[rArr.Count()-1]->SetWishWidth(rArr[rArr.Count()-1]->GetWishWidth() + (sal_uInt16)nWishDiff); //reset auto width rCol.SetOrtho(sal_False, 0, 0 ); } /*-------------------------------------------------------------------- Beschreibung: Hier werden alle Aenderungen der Tableiste wieder in das Modell geschossen --------------------------------------------------------------------*/ void SwView::ExecTabWin( SfxRequest& rReq ) { SwWrtShell &rSh = GetWrtShell(); const sal_uInt16 nFrmType = rSh.IsObjSelected() ? FRMTYPE_DRAWOBJ : rSh.GetFrmType(0,sal_True); const sal_Bool bFrmSelection = rSh.IsFrmSelected(); const sal_Bool bBrowse = rSh.GetViewOptions()->getBrowseMode(); const sal_uInt16 nSlot = rReq.GetSlot(); const SfxItemSet* pReqArgs = rReq.GetArgs(); const sal_uInt16 nDescId = rSh.GetCurPageDesc(); const SwPageDesc& rDesc = rSh.GetPageDesc( nDescId ); const sal_Bool bVerticalWriting = rSh.IsInVerticalText(); const SwFmtHeader& rHeaderFmt = rDesc.GetMaster().GetHeader(); SwFrmFmt *pHeaderFmt = (SwFrmFmt*)rHeaderFmt.GetHeaderFmt(); const SwFmtFooter& rFooterFmt = rDesc.GetMaster().GetFooter(); SwFrmFmt *pFooterFmt = (SwFrmFmt*)rFooterFmt.GetFooterFmt(); const SwFmtFrmSize &rFrmSize = rDesc.GetMaster().GetFrmSize(); const SwRect& rPageRect = rSh.GetAnyCurRect(RECT_PAGE); const long nPageWidth = bBrowse ? rPageRect.Width() : rFrmSize.GetWidth(); const long nPageHeight = bBrowse ? rPageRect.Height() : rFrmSize.GetHeight(); sal_Bool bUnlockView = sal_False; rSh.StartAllAction(); sal_Bool bSect = 0 != (nFrmType & FRMTYPE_COLSECT); switch( nSlot ) { case SID_ATTR_LONG_LRSPACE: if ( pReqArgs ) { SvxLongLRSpaceItem aLongLR( (const SvxLongLRSpaceItem&)pReqArgs-> Get( SID_ATTR_LONG_LRSPACE ) ); SvxLRSpaceItem aLR(RES_LR_SPACE); if ( !bSect && (bFrmSelection || nFrmType & FRMTYPE_FLY_ANY) ) { SwFrmFmt* pFmt = ((SwFrmFmt*)rSh.GetFlyFrmFmt()); const SwRect &rRect = rSh.GetAnyCurRect(RECT_FLY_EMBEDDED); sal_Bool bVerticalFrame(sal_False); { sal_Bool bRTL; sal_Bool bVertL2R; bVerticalFrame = ( bFrmSelection && rSh.IsFrmVertical(sal_True, bRTL, bVertL2R) ) || ( !bFrmSelection && bVerticalWriting); } long nDeltaX = bVerticalFrame ? rRect.Right() - rPageRect.Right() + aLongLR.GetRight() : rPageRect.Left() + aLongLR.GetLeft() - rRect.Left(); SfxItemSet aSet( GetPool(), RES_FRM_SIZE, RES_FRM_SIZE, RES_VERT_ORIENT, RES_HORI_ORIENT, RES_COL, RES_COL, 0 ); if(bVerticalFrame) { SwFmtVertOrient aVertOrient(pFmt->GetVertOrient()); aVertOrient.SetVertOrient(text::VertOrientation::NONE); aVertOrient.SetPos(aVertOrient.GetPos() + nDeltaX ); aSet.Put( aVertOrient ); } else { SwFmtHoriOrient aHoriOrient( pFmt->GetHoriOrient() ); aHoriOrient.SetHoriOrient( text::HoriOrientation::NONE ); aHoriOrient.SetPos( aHoriOrient.GetPos() + nDeltaX ); aSet.Put( aHoriOrient ); } SwFmtFrmSize aSize( pFmt->GetFrmSize() ); long nOldWidth = (long) aSize.GetWidth(); if(aSize.GetWidthPercent()) { SwRect aRect; rSh.CalcBoundRect(aRect, FLY_AS_CHAR); long nPrtWidth = aRect.Width(); aSize.SetWidthPercent(sal_uInt8((nPageWidth - aLongLR.GetLeft() - aLongLR.GetRight()) * 100 /nPrtWidth)); } else aSize.SetWidth( nPageWidth - (aLongLR.GetLeft() + aLongLR.GetRight())); if( nFrmType & FRMTYPE_COLUMN ) { SwFmtCol aCol(pFmt->GetCol()); ::ResizeFrameCols(aCol, nOldWidth, (long)aSize.GetWidth(), nDeltaX ); aSet.Put(aCol); } aSet.Put( aSize ); rSh.StartAction(); rSh.Push(); rSh.SetFlyFrmAttr( aSet ); //die Rahmenselektion wieder aufheben if(!bFrmSelection && rSh.IsFrmSelected()) { rSh.UnSelectFrm(); rSh.LeaveSelFrmMode(); } rSh.Pop(); rSh.EndAction(); } else if ( nFrmType & ( FRMTYPE_HEADER | FRMTYPE_FOOTER )) { // Seitenraender rausrechnen long nOld = rDesc.GetMaster().GetLRSpace().GetLeft(); aLongLR.SetLeft( nOld > aLongLR.GetLeft() ? 0 : aLongLR.GetLeft() - nOld ); nOld = rDesc.GetMaster().GetLRSpace().GetRight(); aLongLR.SetRight( nOld > (sal_uInt16)aLongLR.GetRight() ? 0 : aLongLR.GetRight() - nOld ); aLR.SetLeft((sal_uInt16)aLongLR.GetLeft()); aLR.SetRight((sal_uInt16)aLongLR.GetRight()); if ( nFrmType & FRMTYPE_HEADER && pHeaderFmt ) pHeaderFmt->SetFmtAttr( aLR ); else if( nFrmType & FRMTYPE_FOOTER && pFooterFmt ) pFooterFmt->SetFmtAttr( aLR ); } else if( nFrmType == FRMTYPE_DRAWOBJ) { SwRect aRect( rSh.GetObjRect() ); aRect.Left( aLongLR.GetLeft() + rPageRect.Left() ); aRect.Right( rPageRect.Right() - aLongLR.GetRight()); rSh.SetObjRect( aRect ); } else if(bSect || rSh.IsDirectlyInSection()) { //change the section indents and the columns if available //at first determine the changes SwRect aSectRect = rSh.GetAnyCurRect(RECT_SECTION_PRT, 0); const SwRect aTmpRect = rSh.GetAnyCurRect(RECT_SECTION, 0); aSectRect.Pos() += aTmpRect.Pos(); long nLeftDiff = aLongLR.GetLeft() - (long)(aSectRect.Left() - rPageRect.Left() ); long nRightDiff = aLongLR.GetRight() - (long)( rPageRect.Right() - aSectRect.Right()); //change the LRSpaceItem of the section accordingly const SwSection* pCurrSect = rSh.GetCurrSection(); const SwSectionFmt* pSectFmt = pCurrSect->GetFmt(); SvxLRSpaceItem aLRTmp = pSectFmt->GetLRSpace(); aLRTmp.SetLeft(aLRTmp.GetLeft() + nLeftDiff); aLRTmp.SetRight(aLRTmp.GetRight() + nRightDiff); SfxItemSet aSet(rSh.GetAttrPool(), RES_LR_SPACE, RES_LR_SPACE, RES_COL, RES_COL, 0L); aSet.Put(aLRTmp); //change the first/last column if(bSect) { SwFmtCol aCols( pSectFmt->GetCol() ); long nDiffWidth = nLeftDiff + nRightDiff; ::ResizeFrameCols(aCols, aSectRect.Width(), aSectRect.Width() - nDiffWidth, nLeftDiff ); aSet.Put( aCols ); } SwSectionData aData(*pCurrSect); rSh.UpdateSection(rSh.GetSectionFmtPos(*pSectFmt), aData, &aSet); } else { // Seitenraender einstellen aLR.SetLeft((sal_uInt16)aLongLR.GetLeft()); aLR.SetRight((sal_uInt16)aLongLR.GetRight()); SwapPageMargin( rDesc, aLR ); SwPageDesc aDesc( rDesc ); aDesc.GetMaster().SetFmtAttr( aLR ); rSh.ChgPageDesc( nDescId, aDesc ); } } break; // apply new left and right margins to current page style case SID_ATTR_PAGE_LRSPACE: if ( pReqArgs ) { const SvxLongLRSpaceItem aLongLR( static_cast(pReqArgs->Get( SID_ATTR_PAGE_LRSPACE )) ); SwPageDesc aDesc( rDesc ); { SvxLRSpaceItem aLR( RES_LR_SPACE ); aLR.SetLeft((sal_uInt16)aLongLR.GetLeft()); aLR.SetRight((sal_uInt16)aLongLR.GetRight()); SwapPageMargin( rDesc, aLR ); aDesc.GetMaster().SetFmtAttr( aLR ); } rSh.ChgPageDesc( nDescId, aDesc ); } break; case SID_ATTR_LONG_ULSPACE: if ( pReqArgs ) { SvxLongULSpaceItem aLongULSpace( (const SvxLongULSpaceItem&)pReqArgs-> Get( SID_ATTR_LONG_ULSPACE )); if( bFrmSelection || nFrmType & FRMTYPE_FLY_ANY ) { SwFrmFmt* pFmt = ((SwFrmFmt*)rSh.GetFlyFrmFmt()); const SwRect &rRect = rSh.GetAnyCurRect(RECT_FLY_EMBEDDED); const long nDeltaY = rPageRect.Top() + aLongULSpace.GetUpper() - rRect.Top(); const long nHeight = nPageHeight - (aLongULSpace.GetUpper() + aLongULSpace.GetLower()); SfxItemSet aSet( GetPool(), RES_FRM_SIZE, RES_FRM_SIZE, RES_VERT_ORIENT, RES_HORI_ORIENT, 0 ); //which of the orientation attributes is to be put depends on the frame's environment sal_Bool bRTL; sal_Bool bVertL2R; if ( ( bFrmSelection && rSh.IsFrmVertical(sal_True, bRTL, bVertL2R ) ) || ( !bFrmSelection && bVerticalWriting ) ) { SwFmtHoriOrient aHoriOrient(pFmt->GetHoriOrient()); aHoriOrient.SetHoriOrient(text::HoriOrientation::NONE); aHoriOrient.SetPos(aHoriOrient.GetPos() + nDeltaY ); aSet.Put( aHoriOrient ); } else { SwFmtVertOrient aVertOrient(pFmt->GetVertOrient()); aVertOrient.SetVertOrient(text::VertOrientation::NONE); aVertOrient.SetPos(aVertOrient.GetPos() + nDeltaY ); aSet.Put( aVertOrient ); } SwFmtFrmSize aSize(pFmt->GetFrmSize()); if(aSize.GetHeightPercent()) { SwRect aRect; rSh.CalcBoundRect(aRect, FLY_AS_CHAR); long nPrtHeight = aRect.Height(); aSize.SetHeightPercent(sal_uInt8(nHeight * 100 /nPrtHeight)); } else aSize.SetHeight(nHeight ); aSet.Put( aSize ); rSh.SetFlyFrmAttr( aSet ); } else if( nFrmType == FRMTYPE_DRAWOBJ ) { SwRect aRect( rSh.GetObjRect() ); aRect.Top( aLongULSpace.GetUpper() + rPageRect.Top() ); aRect.Bottom( rPageRect.Bottom() - aLongULSpace.GetLower() ); rSh.SetObjRect( aRect ) ; } else if(bVerticalWriting && (bSect || rSh.IsDirectlyInSection())) { //change the section indents and the columns if available //at first determine the changes SwRect aSectRect = rSh.GetAnyCurRect(RECT_SECTION_PRT, 0); const SwRect aTmpRect = rSh.GetAnyCurRect(RECT_SECTION, 0); aSectRect.Pos() += aTmpRect.Pos(); const long nLeftDiff = aLongULSpace.GetUpper() - (long)(aSectRect.Top() - rPageRect.Top()); const long nRightDiff = aLongULSpace.GetLower() - (long)(nPageHeight - aSectRect.Bottom() + rPageRect.Top()); //change the LRSpaceItem of the section accordingly const SwSection* pCurrSect = rSh.GetCurrSection(); const SwSectionFmt* pSectFmt = pCurrSect->GetFmt(); SvxLRSpaceItem aLR = pSectFmt->GetLRSpace(); aLR.SetLeft(aLR.GetLeft() + nLeftDiff); aLR.SetRight(aLR.GetRight() + nRightDiff); SfxItemSet aSet(rSh.GetAttrPool(), RES_LR_SPACE, RES_LR_SPACE, RES_COL, RES_COL, 0L); aSet.Put(aLR); //change the first/last column if(bSect) { SwFmtCol aCols( pSectFmt->GetCol() ); long nDiffWidth = nLeftDiff + nRightDiff; ::ResizeFrameCols(aCols, aSectRect.Height(), aSectRect.Height() - nDiffWidth, nLeftDiff ); aSet.Put( aCols ); } SwSectionData aData(*pCurrSect); rSh.UpdateSection(rSh.GetSectionFmtPos(*pSectFmt), aData, &aSet); } else { SwPageDesc aDesc( rDesc ); if ( nFrmType & ( FRMTYPE_HEADER | FRMTYPE_FOOTER )) { const sal_Bool bHead = nFrmType & FRMTYPE_HEADER ? sal_True : sal_False; SvxULSpaceItem aUL( rDesc.GetMaster().GetULSpace() ); if ( bHead ) aUL.SetUpper( (sal_uInt16)aLongULSpace.GetUpper() ); else aUL.SetLower( (sal_uInt16)aLongULSpace.GetLower() ); aDesc.GetMaster().SetFmtAttr( aUL ); if( (bHead && pHeaderFmt) || (!bHead && pFooterFmt) ) { SwFmtFrmSize aSz( bHead ? pHeaderFmt->GetFrmSize() : pFooterFmt->GetFrmSize() ); aSz.SetHeightSizeType( ATT_FIX_SIZE ); aSz.SetHeight(nPageHeight - aLongULSpace.GetLower() - aLongULSpace.GetUpper() ); if ( bHead ) pHeaderFmt->SetFmtAttr( aSz ); else pFooterFmt->SetFmtAttr( aSz ); } } else { SvxULSpaceItem aUL(RES_UL_SPACE); aUL.SetUpper((sal_uInt16)aLongULSpace.GetUpper()); aUL.SetLower((sal_uInt16)aLongULSpace.GetLower()); aDesc.GetMaster().SetFmtAttr(aUL); } rSh.ChgPageDesc( nDescId, aDesc ); } } break; // apply new top and bottom margins to current page style case SID_ATTR_PAGE_ULSPACE: if ( pReqArgs ) { SvxLongULSpaceItem aLongULSpace( static_cast(pReqArgs->Get( SID_ATTR_PAGE_ULSPACE ) ) ); SwPageDesc aDesc( rDesc ); { SvxULSpaceItem aUL(RES_UL_SPACE); aUL.SetUpper((sal_uInt16)aLongULSpace.GetUpper()); aUL.SetLower((sal_uInt16)aLongULSpace.GetLower()); aDesc.GetMaster().SetFmtAttr(aUL); } rSh.ChgPageDesc( nDescId, aDesc ); } break; case SID_ATTR_PAGE_COLUMN: if ( pReqArgs ) { const SfxInt16Item aColumnItem( (const SfxInt16Item&)pReqArgs->Get(nSlot) ); const sal_uInt16 nPageColumnType = aColumnItem.GetValue(); // nPageColumnType = // 1 - single-columned page // 2 - two-columned page // 3 - three-columned page // 4 - two-columned page with left column width of 2/3 of page width // 5 - two-columned page with right column width of 2/3 of page width sal_uInt16 nCount = 2; if ( nPageColumnType == 1 ) { nCount = 0; } else if ( nPageColumnType == 3 ) { nCount = 3; } const sal_uInt16 nGutterWidth = 0; const SvxLRSpaceItem aLR( rDesc.GetMaster().GetLRSpace() ); const long nLeft = aLR.GetLeft(); const long nRight = aLR.GetRight(); const long nWidth = nPageWidth - nLeft - nRight; SwFmtCol aCols( rDesc.GetMaster().GetCol() ); aCols.Init( nCount, nGutterWidth, nWidth ); aCols.SetWishWidth( nWidth ); aCols.SetGutterWidth( nGutterWidth, nWidth ); aCols.SetOrtho( sal_False, nGutterWidth, nWidth ); long nColumnLeft = 0; long nColumnRight = 0; if ( nPageColumnType == 4 ) { nColumnRight = (long)(nWidth/3); nColumnLeft = nWidth - nColumnRight; aCols.GetColumns()[0]->SetWishWidth( nColumnLeft ); aCols.GetColumns()[1]->SetWishWidth( nColumnRight ); } else if ( nPageColumnType == 5 ) { nColumnLeft = (long)(nWidth/3); nColumnRight = nWidth - nColumnLeft; aCols.GetColumns()[0]->SetWishWidth( nColumnLeft ); aCols.GetColumns()[1]->SetWishWidth( nColumnRight ); } SwPageDesc aDesc( rDesc ); aDesc.GetMaster().SetFmtAttr( aCols ); rSh.ChgPageDesc( rSh.GetCurPageDesc(), aDesc ); } break; case SID_ATTR_TABSTOP_VERTICAL: case SID_ATTR_TABSTOP: if ( pReqArgs ) { sal_uInt16 nWhich = GetPool().GetWhich(nSlot); SvxTabStopItem aTabStops( (const SvxTabStopItem&)pReqArgs-> Get( nWhich )); aTabStops.SetWhich(RES_PARATR_TABSTOP); const SvxTabStopItem& rDefTabs = (const SvxTabStopItem&)rSh.GetDefault(RES_PARATR_TABSTOP); // Default-Tab an Pos 0 SfxItemSet aSet( GetPool(), RES_LR_SPACE, RES_LR_SPACE ); rSh.GetCurAttr( aSet ); const SvxLRSpaceItem& rLR = (const SvxLRSpaceItem&)aSet.Get(RES_LR_SPACE); if ( rLR.GetTxtFirstLineOfst() < 0 ) { SvxTabStop aSwTabStop( 0, SVX_TAB_ADJUST_DEFAULT ); aTabStops.Insert( aSwTabStop ); } // auffuellen mit Default-Tabs sal_uInt16 nDef = ::GetTabDist( rDefTabs ); ::MakeDefTabs( nDef, aTabStops ); SwTxtFmtColl* pColl = rSh.GetCurTxtFmtColl(); if( pColl && pColl->IsAutoUpdateFmt() ) { SfxItemSet aTmp(GetPool(), RES_PARATR_TABSTOP, RES_PARATR_TABSTOP); aTmp.Put(aTabStops); rSh.AutoUpdatePara( pColl, aTmp ); } else rSh.SetAttr( aTabStops ); break; } case SID_ATTR_PARA_LRSPACE_VERTICAL: case SID_ATTR_PARA_LRSPACE: if ( pReqArgs ) { SvxLRSpaceItem aParaMargin((const SvxLRSpaceItem&)pReqArgs->Get(nSlot)); if(nFrmType & FRMTYPE_FLY_ANY) { sal_Bool bFirstColumn = sal_True; sal_Bool bLastColumn = sal_True; if(nFrmType & FRMTYPE_COLUMN) { sal_uInt16 nCurFrameCol = rSh.GetCurColNum() - 1; bFirstColumn = !nCurFrameCol; const SwFrmFmt* pFmt = rSh.GetFlyFrmFmt(); const SwFmtCol* pCols = &pFmt->GetCol(); const SwColumns& rCols = pCols->GetColumns(); sal_uInt16 nColumnCount = rCols.Count(); bLastColumn = nColumnCount == nCurFrameCol + 1; } } aParaMargin.SetRight( aParaMargin.GetRight() - nRightBorderDistance ); aParaMargin.SetTxtLeft(aParaMargin.GetTxtLeft() - nLeftBorderDistance ); aParaMargin.SetWhich( RES_LR_SPACE ); SwTxtFmtColl* pColl = rSh.GetCurTxtFmtColl(); // #i23726# if (pNumRuleNodeFromDoc) { // --> FME 2005-02-22 #i42922# Mouse move of numbering label // has to consider the left indent of the paragraph SfxItemSet aSet( GetPool(), RES_LR_SPACE, RES_LR_SPACE ); rSh.GetCurAttr( aSet ); const SvxLRSpaceItem& rLR = static_cast(aSet.Get(RES_LR_SPACE)); // <-- SwPosition aPos(*pNumRuleNodeFromDoc); // --> OD 2008-06-09 #i90078# rSh.SetIndent( static_cast< short >(aParaMargin.GetTxtLeft() - rLR.GetTxtLeft()), aPos); // <-- // --> OD 2005-02-18 #i42921# - invalidate state of indent in order // to get a ruler update. aParaMargin.SetWhich( nSlot ); GetViewFrame()->GetBindings().SetState( aParaMargin ); // <-- } else if( pColl && pColl->IsAutoUpdateFmt() ) { SfxItemSet aSet(GetPool(), RES_LR_SPACE, RES_LR_SPACE); aSet.Put(aParaMargin); rSh.AutoUpdatePara( pColl, aSet); } else rSh.SetAttr( aParaMargin ); if ( aParaMargin.GetTxtFirstLineOfst() < 0 ) { SfxItemSet aSet( GetPool(), RES_PARATR_TABSTOP, RES_PARATR_TABSTOP ); rSh.GetCurAttr( aSet ); const SvxTabStopItem& rTabStops = (const SvxTabStopItem&)aSet.Get(RES_PARATR_TABSTOP); // Haben wir einen Tab an Stelle Null sal_uInt16 i; for ( i = 0; i < rTabStops.Count(); ++i ) if ( rTabStops[i].GetTabPos() == 0 ) break; if ( i >= rTabStops.Count() ) { // Kein DefTab SvxTabStopItem aTabStops( RES_PARATR_TABSTOP ); aTabStops = rTabStops; ::lcl_EraseDefTabs(aTabStops); SvxTabStop aSwTabStop( 0, SVX_TAB_ADJUST_DEFAULT ); aTabStops.Insert(aSwTabStop); const SvxTabStopItem& rDefTabs = (const SvxTabStopItem&)rSh.GetDefault(RES_PARATR_TABSTOP); sal_uInt16 nDef = ::GetTabDist(rDefTabs); ::MakeDefTabs( nDef, aTabStops ); if( pColl && pColl->IsAutoUpdateFmt()) { SfxItemSet aSetTmp(GetPool(), RES_PARATR_TABSTOP, RES_PARATR_TABSTOP); aSetTmp.Put(aTabStops); rSh.AutoUpdatePara( pColl, aSetTmp ); } else rSh.SetAttr( aTabStops ); } } } break; case SID_ATTR_PARA_ULSPACE: if ( pReqArgs ) { SvxULSpaceItem aParaMargin((const SvxULSpaceItem&)pReqArgs->Get(nSlot)); long nUDist = 0; long nLDist = 0; aParaMargin.SetUpper( aParaMargin.GetUpper() - nUDist ); aParaMargin.SetLower(aParaMargin.GetLower() - nLDist); aParaMargin.SetWhich( RES_UL_SPACE ); SwTxtFmtColl* pColl = rSh.GetCurTxtFmtColl(); if( pColl && pColl->IsAutoUpdateFmt() ) { SfxItemSet aSet(GetPool(), RES_UL_SPACE, RES_UL_SPACE); aSet.Put(aParaMargin); rSh.AutoUpdatePara( pColl, aSet); } else rSh.SetAttr( aParaMargin ); } break; case SID_RULER_BORDERS_VERTICAL: case SID_RULER_BORDERS: if ( pReqArgs ) { SvxColumnItem aColItem((const SvxColumnItem&)pReqArgs->Get(nSlot)); if( bSetTabColFromDoc || (!bSect && rSh.GetTableFmt()) ) { ASSERT(aColItem.Count(), "ColDesc ist leer!!"); const sal_Bool bSingleLine = ((const SfxBoolItem&)rReq. GetArgs()->Get(SID_RULER_ACT_LINE_ONLY)).GetValue(); SwTabCols aTabCols; if ( bSetTabColFromDoc ) rSh.GetMouseTabCols( aTabCols, aTabColFromDocPos ); else rSh.GetTabCols(aTabCols); // linker Tabellenrand long nBorder = (long)(aColItem.GetLeft() - aTabCols.GetLeftMin()); aTabCols.SetLeft( nBorder ); nBorder = (bVerticalWriting ? nPageHeight : nPageWidth) - aTabCols.GetLeftMin() - aColItem.GetRight(); #ifdef DEBUG long nTmp1 = nPageWidth; long nTmp2 = aTabCols.GetLeftMin() + nBorder; (void)nTmp1; (void)nTmp2; #endif if ( aColItem.GetRight() > 0 ) aTabCols.SetRight( nBorder ); // Tabcols der Reihe nach // Die letzte Col wird durch den Rand definiert //columns in right-to-left tables need to be mirrored sal_Bool bIsTableRTL = IsTabColFromDoc() ? rSh.IsMouseTableRightToLeft(aTabColFromDocPos) : rSh.IsTableRightToLeft(); if(bIsTableRTL) { sal_uInt16 nColCount = aColItem.Count() - 1; for ( sal_uInt16 i = 0; i < nColCount; ++i ) { const SvxColumnDescription& rCol = aColItem[nColCount - i]; aTabCols[i] = aTabCols.GetRight() - rCol.nStart; aTabCols.SetHidden( i, !rCol.bVisible ); } } else { for ( sal_uInt16 i = 0; i < aColItem.Count()-1; ++i ) { const SvxColumnDescription& rCol = aColItem[i]; aTabCols[i] = rCol.nEnd + aTabCols.GetLeft(); aTabCols.SetHidden( i, !rCol.bVisible ); } } if ( bSetTabColFromDoc ) { if( !rSh.IsViewLocked() ) { bUnlockView = sal_True; rSh.LockView( sal_True ); } rSh.SetMouseTabCols( aTabCols, bSingleLine, aTabColFromDocPos ); } else rSh.SetTabCols(aTabCols, bSingleLine); } else { if ( bFrmSelection || nFrmType & FRMTYPE_FLY_ANY || bSect) { SwSectionFmt *pSectFmt = 0; SfxItemSet aSet( GetPool(), RES_COL, RES_COL ); if(bSect) { const SwSection *pSect = rSh.GetAnySection(); ASSERT( pSect, "Welcher Bereich?"); pSectFmt = pSect->GetFmt(); } else { rSh.GetFlyFrmAttr( aSet ); } SwFmtCol aCols( bSect ? pSectFmt->GetCol() : (const SwFmtCol&)aSet.Get( RES_COL, sal_False )); SwRect aCurRect = rSh.GetAnyCurRect(bSect ? RECT_SECTION_PRT : RECT_FLY_PRT_EMBEDDED); const long lWidth = bVerticalWriting ? aCurRect.Height() : aCurRect.Width(); ::lcl_ConvertToCols( aColItem, sal_uInt16(lWidth), aCols ); aSet.Put( aCols ); if(bSect) rSh.SetSectionAttr( aSet, pSectFmt ); else { rSh.StartAction(); rSh.Push(); rSh.SetFlyFrmAttr( aSet ); //die Rahmenselektion wieder aufheben if(!bFrmSelection && rSh.IsFrmSelected()) { rSh.UnSelectFrm(); rSh.LeaveSelFrmMode(); } rSh.Pop(); rSh.EndAction(); } } else { SwFmtCol aCols( rDesc.GetMaster().GetCol() ); const SwRect aPrtRect = rSh.GetAnyCurRect(RECT_PAGE_PRT); ::lcl_ConvertToCols( aColItem, sal_uInt16(bVerticalWriting ? aPrtRect.Height() : aPrtRect.Width()), aCols ); SwPageDesc aDesc( rDesc ); aDesc.GetMaster().SetFmtAttr( aCols ); rSh.ChgPageDesc( rSh.GetCurPageDesc(), aDesc ); } } } break; case SID_RULER_ROWS : case SID_RULER_ROWS_VERTICAL: if ( pReqArgs ) { SvxColumnItem aColItem((const SvxColumnItem&)pReqArgs->Get(nSlot)); if( bSetTabColFromDoc || (!bSect && rSh.GetTableFmt()) ) { ASSERT(aColItem.Count(), "ColDesc ist leer!!"); SwTabCols aTabCols; if ( bSetTabRowFromDoc ) rSh.GetMouseTabRows( aTabCols, aTabColFromDocPos ); else rSh.GetTabRows(aTabCols); if ( bVerticalWriting ) { aTabCols.SetRight(nPageWidth - aColItem.GetRight() - aColItem.GetLeft()); aTabCols.SetLeftMin(aColItem.GetLeft()); } else { long nBorder = nPageHeight - aTabCols.GetLeftMin() - aColItem.GetRight(); aTabCols.SetRight( nBorder ); } if(bVerticalWriting) { for ( sal_uInt16 i = aColItem.Count() - 1; i; --i ) { const SvxColumnDescription& rCol = aColItem[i - 1]; long nColumnPos = aTabCols.GetRight() - rCol.nEnd ; aTabCols[i - 1] = nColumnPos; aTabCols.SetHidden( i - 1, !rCol.bVisible ); } } else { for ( sal_uInt16 i = 0; i < aColItem.Count()-1; ++i ) { const SvxColumnDescription& rCol = aColItem[i]; aTabCols[i] = rCol.nEnd + aTabCols.GetLeft(); aTabCols.SetHidden( i, !rCol.bVisible ); } } sal_Bool bSingleLine = sal_False; const SfxPoolItem* pSingleLine; if( SFX_ITEM_SET == pReqArgs->GetItemState(SID_RULER_ACT_LINE_ONLY, sal_False, &pSingleLine)) bSingleLine = ((const SfxBoolItem*)pSingleLine)->GetValue(); if ( bSetTabRowFromDoc ) { if( !rSh.IsViewLocked() ) { bUnlockView = sal_True; rSh.LockView( sal_True ); } rSh.SetMouseTabRows( aTabCols, bSingleLine, aTabColFromDocPos ); } else rSh.SetTabRows(aTabCols, bSingleLine); } } break; default: ASSERT( !this, "Falsche SlotId"); } rSh.EndAllAction(); if( bUnlockView ) rSh.LockView( sal_False ); bSetTabColFromDoc = bSetTabRowFromDoc = bTabColFromDoc = bTabRowFromDoc = sal_False; SetNumRuleNodeFromDoc(NULL); } /*-------------------------------------------------------------------- Beschreibung: Hier wird der Status der Tableiste ermittelt sprich alle relevanten Attribute an der CursorPos werden der Tableiste uebermittelt --------------------------------------------------------------------*/ void SwView::StateTabWin(SfxItemSet& rSet) { SwWrtShell &rSh = GetWrtShell(); const Point* pPt = IsTabColFromDoc() || IsTabRowFromDoc() ? &aTabColFromDocPos : 0; const sal_uInt16 nFrmType = rSh.IsObjSelected() ? FRMTYPE_DRAWOBJ : rSh.GetFrmType( pPt, sal_True ); const sal_Bool bFrmSelection = rSh.IsFrmSelected(); const sal_Bool bBrowse = rSh.GetViewOptions()->getBrowseMode(); // PageOffset/Begrenzer const SwRect& rPageRect = rSh.GetAnyCurRect( RECT_PAGE, pPt ); const SwRect& rPagePrtRect = rSh.GetAnyCurRect( RECT_PAGE_PRT, pPt ); const long nPageWidth = rPageRect.Width(); const long nPageHeight = rPageRect.Height(); const SwPageDesc& rDesc = rSh.GetPageDesc( IsTabColFromDoc() || bTabRowFromDoc ? rSh.GetMousePageDesc(aTabColFromDocPos) : rSh.GetCurPageDesc() ); const SvxFrameDirectionItem& rFrameDir = rDesc.GetMaster().GetFrmDir(); const sal_Bool bVerticalWriting = rSh.IsInVerticalText(); //enable tab stop display on the rulers depending on the writing direction WinBits nRulerStyle = pHRuler->GetStyle() & ~WB_EXTRAFIELD; pHRuler->SetStyle(bVerticalWriting||bBrowse ? nRulerStyle : nRulerStyle|WB_EXTRAFIELD); nRulerStyle = pVRuler->GetStyle() & ~WB_EXTRAFIELD; pVRuler->SetStyle(bVerticalWriting ? nRulerStyle|WB_EXTRAFIELD : nRulerStyle); //#i24363# tab stops relative to indent bool bRelative = rSh.getIDocumentSettingAccess()->get(IDocumentSettingAccess::TABS_RELATIVE_TO_INDENT); pHRuler->SetTabsRelativeToIndent( bRelative ); pVRuler->SetTabsRelativeToIndent( bRelative ); SvxLRSpaceItem aPageLRSpace( rDesc.GetMaster().GetLRSpace() ); SwapPageMargin( rDesc, aPageLRSpace ); SfxItemSet aCoreSet( GetPool(), RES_PARATR_TABSTOP, RES_PARATR_TABSTOP, RES_LR_SPACE, RES_UL_SPACE, 0 ); // get also the list level indent values merged as LR-SPACE item, if needed. rSh.GetCurAttr( aCoreSet, true ); SelectionType nSelType = rSh.GetSelectionType(); SfxWhichIter aIter( rSet ); sal_uInt16 nWhich = aIter.FirstWhich(); sal_Bool bPutContentProtection = sal_False; while ( nWhich ) { switch ( nWhich ) { case SID_ATTR_PAGE_COLUMN: { sal_uInt16 nColumnType = 0; const SwFrmFmt& rMaster = rDesc.GetMaster(); SwFmtCol aCol(rMaster.GetCol()); const sal_uInt16 nCols = aCol.GetNumCols(); if ( nCols == 0 ) { nColumnType = 1; } else if ( nCols == 2 ) { const sal_uInt16 nColLeft = aCol.CalcPrtColWidth(0, aCol.GetWishWidth()); const sal_uInt16 nColRight = aCol.CalcPrtColWidth(1, aCol.GetWishWidth()); if ( abs(nColLeft - nColRight) <= 10 ) { nColumnType = 2; } else if( abs(nColLeft - nColRight*2) < 20 ) { nColumnType = 4; } else if( abs(nColLeft*2 - nColRight) < 20 ) { nColumnType = 5; } } else if( nCols == 3 ) { nColumnType = 3; } rSet.Put( SfxInt16Item( SID_ATTR_PAGE_COLUMN, nColumnType ) ); } break; case SID_ATTR_LONG_LRSPACE: { SvxLongLRSpaceItem aLongLR( (long)aPageLRSpace.GetLeft(), (long)aPageLRSpace.GetRight(), SID_ATTR_LONG_LRSPACE); if(bBrowse) { aLongLR.SetLeft(rPagePrtRect.Left()); aLongLR.SetRight(nPageWidth - rPagePrtRect.Right()); } if ( ( nFrmType & FRMTYPE_HEADER || nFrmType & FRMTYPE_FOOTER ) && !(nFrmType & FRMTYPE_COLSECT) ) { SwFrmFmt *pFmt = (SwFrmFmt*) (nFrmType & FRMTYPE_HEADER ? rDesc.GetMaster().GetHeader().GetHeaderFmt() : rDesc.GetMaster().GetFooter().GetFooterFmt()); if( pFmt )// #i80890# if rDesc is not the one belonging to the current page is might crash { SwRect aRect( rSh.GetAnyCurRect( RECT_HEADERFOOTER, pPt)); aRect.Pos() -= rSh.GetAnyCurRect( RECT_PAGE, pPt ).Pos(); const SvxLRSpaceItem& aLR = pFmt->GetLRSpace(); aLongLR.SetLeft ( (long)aLR.GetLeft() + (long)aRect.Left() ); aLongLR.SetRight( (nPageWidth - (long)aRect.Right() + (long)aLR.GetRight())); } } else { SwRect aRect; if( !bFrmSelection && ((nFrmType & FRMTYPE_COLSECT) || rSh.IsDirectlyInSection()) ) { aRect = rSh.GetAnyCurRect(RECT_SECTION_PRT, pPt); const SwRect aTmpRect = rSh.GetAnyCurRect(RECT_SECTION, pPt); aRect.Pos() += aTmpRect.Pos(); } else if ( bFrmSelection || nFrmType & FRMTYPE_FLY_ANY ) aRect = rSh.GetAnyCurRect(RECT_FLY_EMBEDDED, pPt); else if( nFrmType & FRMTYPE_DRAWOBJ) aRect = rSh.GetObjRect(); if( aRect.Width() ) { // PAGES01 // make relative to page position: aLongLR.SetLeft ((long)( aRect.Left() - rPageRect.Left() )); aLongLR.SetRight((long)( rPageRect.Right() - aRect.Right())); } } if( nWhich == SID_ATTR_LONG_LRSPACE ) rSet.Put( aLongLR ); else { SvxLRSpaceItem aLR( aLongLR.GetLeft(), aLongLR.GetRight(), 0, 0, nWhich); rSet.Put(aLR); } break; } // provide left and right margins of current page style case SID_ATTR_PAGE_LRSPACE: { SvxLongLRSpaceItem aLongLR( (long)aPageLRSpace.GetLeft(), (long)aPageLRSpace.GetRight(), SID_ATTR_PAGE_LRSPACE ); rSet.Put( aLongLR ); } break; case SID_ATTR_LONG_ULSPACE: { // Rand Seite Oben Unten SvxULSpaceItem aUL( rDesc.GetMaster().GetULSpace() ); SvxLongULSpaceItem aLongUL( (long)aUL.GetUpper(), (long)aUL.GetLower(), SID_ATTR_LONG_ULSPACE); if ( bFrmSelection || nFrmType & FRMTYPE_FLY_ANY ) { // Dokumentkoordinaten Frame auf Seitenkoordinaten umbrechen const SwRect &rRect = rSh.GetAnyCurRect(RECT_FLY_EMBEDDED, pPt); aLongUL.SetUpper((sal_uInt16)(rRect.Top() - rPageRect.Top() )); aLongUL.SetLower((sal_uInt16)(rPageRect.Bottom() - rRect.Bottom() )); } else if ( nFrmType & FRMTYPE_HEADER || nFrmType & FRMTYPE_FOOTER ) { SwRect aRect( rSh.GetAnyCurRect( RECT_HEADERFOOTER, pPt)); aRect.Pos() -= rSh.GetAnyCurRect( RECT_PAGE, pPt ).Pos(); aLongUL.SetUpper( (sal_uInt16)aRect.Top() ); aLongUL.SetLower( (sal_uInt16)(nPageHeight - aRect.Bottom()) ); } else if( nFrmType & FRMTYPE_DRAWOBJ) { const SwRect &rRect = rSh.GetObjRect(); aLongUL.SetUpper((rRect.Top() - rPageRect.Top())); aLongUL.SetLower((rPageRect.Bottom() - rRect.Bottom())); } else if(bBrowse) { aLongUL.SetUpper(rPagePrtRect.Top()); aLongUL.SetLower(nPageHeight - rPagePrtRect.Bottom()); } if( nWhich == SID_ATTR_LONG_ULSPACE ) rSet.Put( aLongUL ); else { SvxULSpaceItem aULTmp((sal_uInt16)aLongUL.GetUpper(), (sal_uInt16)aLongUL.GetLower(), nWhich); rSet.Put(aULTmp); } break; } // provide top and bottom margins of current page style case SID_ATTR_PAGE_ULSPACE: { const SvxULSpaceItem aUL( rDesc.GetMaster().GetULSpace() ); SvxLongULSpaceItem aLongUL( (long)aUL.GetUpper(), (long)aUL.GetLower(), SID_ATTR_PAGE_ULSPACE ); rSet.Put( aLongUL ); } break; case SID_ATTR_TABSTOP_VERTICAL : case RES_PARATR_TABSTOP: { if ( ISA( SwWebView ) || IsTabColFromDoc() || IsTabRowFromDoc() || ( nSelType & nsSelectionType::SEL_GRF) || (nSelType & nsSelectionType::SEL_FRM) || (nSelType & nsSelectionType::SEL_OLE) || SFX_ITEM_AVAILABLE > aCoreSet.GetItemState(RES_LR_SPACE)|| (!bVerticalWriting && (SID_ATTR_TABSTOP_VERTICAL == nWhich))|| (bVerticalWriting && (RES_PARATR_TABSTOP == nWhich)) ) rSet.DisableItem( nWhich ); else { SvxTabStopItem aTabStops((const SvxTabStopItem&) aCoreSet.Get( RES_PARATR_TABSTOP )); const SvxTabStopItem& rDefTabs = (const SvxTabStopItem&) rSh.GetDefault(RES_PARATR_TABSTOP); DBG_ASSERT(pHRuler, "warum ist das Lineal nicht da?"); long nDefTabDist = ::GetTabDist(rDefTabs); pHRuler->SetDefTabDist( nDefTabDist ); pVRuler->SetDefTabDist( nDefTabDist ); ::lcl_EraseDefTabs(aTabStops); rSet.Put(aTabStops, nWhich); } break; } case SID_ATTR_PARA_LRSPACE_VERTICAL: case SID_ATTR_PARA_LRSPACE: { if ( nSelType & nsSelectionType::SEL_GRF || nSelType & nsSelectionType::SEL_FRM || nSelType & nsSelectionType::SEL_OLE || nFrmType == FRMTYPE_DRAWOBJ || (!bVerticalWriting && (SID_ATTR_PARA_LRSPACE_VERTICAL == nWhich))|| (bVerticalWriting && (SID_ATTR_PARA_LRSPACE == nWhich)) ) { rSet.DisableItem(nWhich); } else { SvxLRSpaceItem aLR( RES_LR_SPACE ); if ( !IsTabColFromDoc() ) { aLR = (const SvxLRSpaceItem&)aCoreSet.Get(RES_LR_SPACE); // #i23726# if (pNumRuleNodeFromDoc) { short nOffset = static_cast< short >(aLR.GetTxtLeft() + // --> FME 2005-02-22 #i42922# Mouse move of numbering label // has to consider the left indent of the paragraph pNumRuleNodeFromDoc->GetLeftMarginWithNum( sal_True ) ); // <-- short nFLOffset; pNumRuleNodeFromDoc->GetFirstLineOfsWithNum( nFLOffset ); aLR.SetLeft( nOffset + nFLOffset ); } } aLR.SetWhich(nWhich); rSet.Put(aLR); } break; } case SID_ATTR_PARA_ULSPACE: { SvxULSpaceItem aUL = (const SvxULSpaceItem&)aCoreSet.Get(RES_UL_SPACE); aUL.SetWhich(nWhich); SfxItemState e = aCoreSet.GetItemState(RES_UL_SPACE); if( e >= SFX_ITEM_AVAILABLE ) rSet.Put( aUL ); else rSet.InvalidateItem(nWhich); } break; case SID_RULER_BORDER_DISTANCE: { nLeftBorderDistance = 0; nRightBorderDistance = 0; if ( nSelType & nsSelectionType::SEL_GRF || nSelType & nsSelectionType::SEL_FRM || nSelType & nsSelectionType::SEL_OLE || nFrmType == FRMTYPE_DRAWOBJ ) rSet.DisableItem(SID_RULER_BORDER_DISTANCE); else { SvxLRSpaceItem aDistLR(SID_RULER_BORDER_DISTANCE); if(nFrmType & FRMTYPE_FLY_ANY) { if( IsTabColFromDoc() ) { const SwRect& rFlyPrtRect = rSh.GetAnyCurRect( RECT_FLY_PRT_EMBEDDED, pPt ); aDistLR.SetLeft(rFlyPrtRect.Left()); aDistLR.SetRight(rFlyPrtRect.Left()); } else { SfxItemSet aCoreSet2( GetPool(), RES_BOX, RES_BOX, SID_ATTR_BORDER_INNER, SID_ATTR_BORDER_INNER, 0 ); SvxBoxInfoItem aBoxInfo( SID_ATTR_BORDER_INNER ); aCoreSet.Put( aBoxInfo ); rSh.GetFlyFrmAttr( aCoreSet ); const SvxBoxItem& rBox = (const SvxBoxItem&)aCoreSet.Get(RES_BOX); aDistLR.SetLeft((sal_uInt16)rBox.GetDistance(BOX_LINE_LEFT )); aDistLR.SetRight((sal_uInt16)rBox.GetDistance(BOX_LINE_RIGHT)); //add the paragraph border distance SfxItemSet aCoreSet1( GetPool(), RES_BOX, RES_BOX, 0 ); rSh.GetCurAttr( aCoreSet1 ); const SvxBoxItem& rParaBox = (const SvxBoxItem&)aCoreSet1.Get(RES_BOX); aDistLR.SetLeft(aDistLR.GetLeft() + (sal_uInt16)rParaBox.GetDistance(BOX_LINE_LEFT )); aDistLR.SetRight(aDistLR.GetRight() + (sal_uInt16)rParaBox.GetDistance(BOX_LINE_RIGHT)); } rSet.Put(aDistLR); nLeftBorderDistance = static_cast< sal_uInt16 >(aDistLR.GetLeft()); nRightBorderDistance = static_cast< sal_uInt16 >(aDistLR.GetRight()); } else if ( IsTabColFromDoc() || ( rSh.GetTableFmt() && !bFrmSelection && !(nFrmType & FRMTYPE_COLSECT ) ) ) { SfxItemSet aCoreSet2( GetPool(), RES_BOX, RES_BOX, SID_ATTR_BORDER_INNER, SID_ATTR_BORDER_INNER, 0 ); SvxBoxInfoItem aBoxInfo( SID_ATTR_BORDER_INNER ); aBoxInfo.SetTable(sal_False); aBoxInfo.SetDist((sal_Bool) sal_True); aCoreSet2.Put(aBoxInfo); rSh.GetTabBorders( aCoreSet2 ); const SvxBoxItem& rBox = (const SvxBoxItem&)aCoreSet2.Get(RES_BOX); aDistLR.SetLeft((sal_uInt16)rBox.GetDistance(BOX_LINE_LEFT )); aDistLR.SetRight((sal_uInt16)rBox.GetDistance(BOX_LINE_RIGHT)); //add the border distance of the paragraph SfxItemSet aCoreSet1( GetPool(), RES_BOX, RES_BOX, 0 ); rSh.GetCurAttr( aCoreSet1 ); const SvxBoxItem& rParaBox = (const SvxBoxItem&)aCoreSet1.Get(RES_BOX); aDistLR.SetLeft(aDistLR.GetLeft() + (sal_uInt16)rParaBox.GetDistance(BOX_LINE_LEFT )); aDistLR.SetRight(aDistLR.GetRight() + (sal_uInt16)rParaBox.GetDistance(BOX_LINE_RIGHT)); rSet.Put(aDistLR); nLeftBorderDistance = static_cast< sal_uInt16 >(aDistLR.GetLeft()); nRightBorderDistance = static_cast< sal_uInt16 >(aDistLR.GetRight()); } else if ( !rSh.IsDirectlyInSection() ) { //get the page/header/footer border distance const SwFrmFmt& rMaster = rDesc.GetMaster(); const SvxBoxItem& rBox = (const SvxBoxItem&)rMaster.GetAttrSet().Get(RES_BOX); aDistLR.SetLeft((sal_uInt16)rBox.GetDistance(BOX_LINE_LEFT )); aDistLR.SetRight((sal_uInt16)rBox.GetDistance(BOX_LINE_RIGHT)); const SvxBoxItem* pBox = 0; if(nFrmType & FRMTYPE_HEADER) { rMaster.GetHeader(); const SwFmtHeader& rHeaderFmt = rMaster.GetHeader(); SwFrmFmt *pHeaderFmt = (SwFrmFmt*)rHeaderFmt.GetHeaderFmt(); if( pHeaderFmt )// #i80890# if rDesc is not the one belonging to the current page is might crash pBox = & (const SvxBoxItem&)pHeaderFmt->GetBox(); } else if(nFrmType & FRMTYPE_FOOTER ) { const SwFmtFooter& rFooterFmt = rMaster.GetFooter(); SwFrmFmt *pFooterFmt = (SwFrmFmt*)rFooterFmt.GetFooterFmt(); if( pFooterFmt )// #i80890# if rDesc is not the one belonging to the current page is might crash pBox = & (const SvxBoxItem&)pFooterFmt->GetBox(); } if(pBox) { aDistLR.SetLeft((sal_uInt16)pBox->GetDistance(BOX_LINE_LEFT )); aDistLR.SetRight((sal_uInt16)pBox->GetDistance(BOX_LINE_RIGHT)); } //add the border distance of the paragraph SfxItemSet aCoreSetTmp( GetPool(), RES_BOX, RES_BOX, SID_ATTR_BORDER_INNER, SID_ATTR_BORDER_INNER, 0 ); rSh.GetCurAttr( aCoreSetTmp ); const SvxBoxItem& rParaBox = (const SvxBoxItem&)aCoreSetTmp.Get(RES_BOX); aDistLR.SetLeft(aDistLR.GetLeft() + (sal_uInt16)rParaBox.GetDistance(BOX_LINE_LEFT )); aDistLR.SetRight(aDistLR.GetRight() + (sal_uInt16)rParaBox.GetDistance(BOX_LINE_RIGHT)); rSet.Put(aDistLR); nLeftBorderDistance = static_cast< sal_uInt16 >(aDistLR.GetLeft()); nRightBorderDistance = static_cast< sal_uInt16 >(aDistLR.GetRight()); } } } break; case SID_RULER_TEXT_RIGHT_TO_LEFT: { if ( nSelType & nsSelectionType::SEL_GRF || nSelType & nsSelectionType::SEL_FRM || nSelType & nsSelectionType::SEL_OLE || nFrmType == FRMTYPE_DRAWOBJ) rSet.DisableItem(nWhich); else { sal_Bool bFlag = rSh.IsInRightToLeftText(); rSet.Put(SfxBoolItem(nWhich, bFlag)); } } break; case SID_RULER_BORDERS_VERTICAL: case SID_RULER_BORDERS: { sal_Bool bFrameHasVerticalColumns(sal_False); { sal_Bool bFrameRTL; sal_Bool bFrameVertL2R; bFrameHasVerticalColumns = rSh.IsFrmVertical(sal_False, bFrameRTL, bFrameVertL2R) && bFrmSelection; } sal_Bool bHasTable = ( IsTabColFromDoc() || ( rSh.GetTableFmt() && !bFrmSelection && !(nFrmType & FRMTYPE_COLSECT ) ) ); sal_Bool bTableVertical = bHasTable && rSh.IsTableVertical(); if( ( (SID_RULER_BORDERS_VERTICAL == nWhich) && ((bHasTable && !bTableVertical)|| (!bVerticalWriting && !bFrmSelection && !bHasTable ) || (bFrmSelection && !bFrameHasVerticalColumns)) ) || ((SID_RULER_BORDERS == nWhich) && ((bHasTable && bTableVertical)|| (bVerticalWriting && !bFrmSelection&& !bHasTable) || bFrameHasVerticalColumns))) rSet.DisableItem(nWhich); else if ( bHasTable ) { SwTabCols aTabCols; sal_uInt16 nNum; if ( 0 != ( bSetTabColFromDoc = IsTabColFromDoc() ) ) { rSh.GetMouseTabCols( aTabCols, aTabColFromDocPos ); nNum = rSh.GetCurMouseTabColNum( aTabColFromDocPos ); } else { rSh.GetTabCols( aTabCols ); nNum = rSh.GetCurTabColNum(); if(rSh.IsTableRightToLeft()) nNum = aTabCols.Count() - nNum; } ASSERT(nNum <= aTabCols.Count(), "TabCol not found"); const int nLft = aTabCols.GetLeftMin() + aTabCols.GetLeft(); const int nRgt = (sal_uInt16)(bTableVertical ? nPageHeight : nPageWidth) - (aTabCols.GetLeftMin() + aTabCols.GetRight()); const sal_uInt16 nL = static_cast< sal_uInt16 >(nLft > 0 ? nLft : 0); const sal_uInt16 nR = static_cast< sal_uInt16 >(nRgt > 0 ? nRgt : 0); SvxColumnItem aColItem(nNum, nL, nR); sal_uInt16 nStart = 0, nEnd; //columns in right-to-left tables need to be mirrored sal_Bool bIsTableRTL = IsTabColFromDoc() ? rSh.IsMouseTableRightToLeft(aTabColFromDocPos) : rSh.IsTableRightToLeft(); if(bIsTableRTL) { for ( sal_uInt16 i = aTabCols.Count(); i ; --i ) { const SwTabColsEntry& rEntry = aTabCols.GetEntry( i - 1 ); nEnd = (sal_uInt16)aTabCols.GetRight(); nEnd = nEnd - (sal_uInt16)rEntry.nPos; SvxColumnDescription aColDesc( nStart, nEnd, (sal_uInt16(aTabCols.GetRight() - rEntry.nMax)), (sal_uInt16(aTabCols.GetRight() - rEntry.nMin)), !aTabCols.IsHidden(i - 1) ); aColItem.Append(aColDesc); nStart = nEnd; } SvxColumnDescription aColDesc(nStart, aTabCols.GetRight() - aTabCols.GetLeft(), sal_True); aColItem.Append(aColDesc); } else { for ( sal_uInt16 i = 0; i < aTabCols.Count(); ++i ) { const SwTabColsEntry& rEntry = aTabCols.GetEntry( i ); nEnd = static_cast< sal_uInt16 >(rEntry.nPos - aTabCols.GetLeft()); SvxColumnDescription aColDesc( nStart, nEnd, rEntry.nMin - aTabCols.GetLeft(), rEntry.nMax - aTabCols.GetLeft(), !aTabCols.IsHidden(i) ); aColItem.Append(aColDesc); nStart = nEnd; } SvxColumnDescription aColDesc(nStart, aTabCols.GetRight() - aTabCols.GetLeft(), 0, 0, sal_True); aColItem.Append(aColDesc); } rSet.Put(aColItem, nWhich); } else if ( bFrmSelection || nFrmType & ( FRMTYPE_COLUMN | FRMTYPE_COLSECT ) ) { // Aus Rahmen oder Seite ? sal_uInt16 nNum = 0; if(bFrmSelection) { const SwFrmFmt* pFmt = rSh.GetFlyFrmFmt(); if(pFmt) nNum = pFmt->GetCol().GetNumCols(); } else nNum = rSh.GetCurColNum(); if( //eigentlich sollte FRMTYPE_COLSECT nicht enthalten sein, wenn der Rahmen selektiert ist! !bFrmSelection && nFrmType & FRMTYPE_COLSECT ) { const SwSection *pSect = rSh.GetAnySection(sal_False, pPt); ASSERT( pSect, "Welcher Bereich?"); if( pSect ) { SwSectionFmt *pFmt = pSect->GetFmt(); const SwFmtCol& rCol = pFmt->GetCol(); if(rSh.IsInRightToLeftText()) nNum = rCol.GetColumns().Count() - nNum; else --nNum; SvxColumnItem aColItem(nNum); SwRect aRect = rSh.GetAnyCurRect(RECT_SECTION_PRT, pPt); const SwRect aTmpRect = rSh.GetAnyCurRect(RECT_SECTION, pPt); ::lcl_FillSvxColumn(rCol, sal_uInt16(bVerticalWriting ? aRect.Height() : aRect.Width()), aColItem, 0); if(bVerticalWriting) { aRect.Pos() += Point(aTmpRect.Left(), aTmpRect.Top()); aRect.Pos().Y() -= rPageRect.Top(); aColItem.SetLeft ((sal_uInt16)(aRect.Top())); aColItem.SetRight((sal_uInt16)(nPageHeight - aRect.Bottom() )); } else { aRect.Pos() += aTmpRect.Pos(); // PAGES01 // make relative to page position: aColItem.SetLeft ((sal_uInt16)( aRect.Left() - rPageRect.Left() )); aColItem.SetRight((sal_uInt16)( rPageRect.Right() - aRect.Right())); } aColItem.SetOrtho(aColItem.CalcOrtho()); rSet.Put(aColItem, nWhich); } } else if( bFrmSelection || nFrmType & FRMTYPE_FLY_ANY ) { // Spalten in Rahmen if ( nNum ) { const SwFrmFmt* pFmt = rSh.GetFlyFrmFmt() ; const SwFmtCol& rCol = pFmt->GetCol(); if(rSh.IsInRightToLeftText()) nNum = rCol.GetColumns().Count() - nNum; else nNum--; SvxColumnItem aColItem(nNum); const SwRect &rSizeRect = rSh.GetAnyCurRect(RECT_FLY_PRT_EMBEDDED, pPt); sal_Bool bUseVertical = bFrameHasVerticalColumns || (!bFrmSelection && bVerticalWriting); const long lWidth = bUseVertical ? rSizeRect.Height() : rSizeRect.Width(); const SwRect &rRect = rSh.GetAnyCurRect(RECT_FLY_EMBEDDED, pPt); long nDist2 = ((bUseVertical ? rRect.Height() : rRect.Width()) - lWidth) /2; ::lcl_FillSvxColumn(rCol, sal_uInt16(lWidth), aColItem, nDist2); SfxItemSet aFrameSet(GetPool(), RES_LR_SPACE, RES_LR_SPACE); rSh.GetFlyFrmAttr( aFrameSet ); if(bUseVertical) { aColItem.SetLeft ((sal_uInt16)(rRect.Top()- rPageRect.Top())); aColItem.SetRight((sal_uInt16)(nPageHeight + rPageRect.Top() - rRect.Bottom() )); } else { aColItem.SetLeft ((sal_uInt16)(rRect.Left() - rPageRect.Left() )); aColItem.SetRight((sal_uInt16)(rPageRect.Right() - rRect.Right() )); } aColItem.SetOrtho(aColItem.CalcOrtho()); rSet.Put(aColItem, nWhich); } else rSet.DisableItem(nWhich); } else { // Spalten auf der Seite const SwFrmFmt& rMaster = rDesc.GetMaster(); SwFmtCol aCol(rMaster.GetCol()); if(rFrameDir.GetValue() == FRMDIR_HORI_RIGHT_TOP) nNum = aCol.GetColumns().Count() - nNum; else nNum--; SvxColumnItem aColItem(nNum); const SwRect aPrtRect = rSh.GetAnyCurRect(RECT_PAGE_PRT, pPt); const SvxBoxItem& rBox = (const SvxBoxItem&)rMaster.GetFmtAttr(RES_BOX); long nDist = rBox.GetDistance(); ::lcl_FillSvxColumn(aCol, sal_uInt16(bVerticalWriting ? aPrtRect.Height() : aPrtRect.Width() ), aColItem, nDist); if(bBrowse) { aColItem.SetLeft((sal_uInt16)rPagePrtRect.Left()); aColItem.SetRight(sal_uInt16(nPageWidth - rPagePrtRect.Right())); } else { aColItem.SetLeft (aPageLRSpace.GetLeft()); aColItem.SetRight(aPageLRSpace.GetRight()); } aColItem.SetOrtho(aColItem.CalcOrtho()); rSet.Put(aColItem, nWhich); } } else rSet.DisableItem(nWhich); break; } case SID_RULER_ROWS : case SID_RULER_ROWS_VERTICAL: { sal_Bool bFrameHasVerticalColumns(sal_False); { sal_Bool bFrameRTL; sal_Bool bFrameVertL2R; bFrameHasVerticalColumns = rSh.IsFrmVertical(sal_False, bFrameRTL, bFrameVertL2R) && bFrmSelection; } if( ( (SID_RULER_ROWS == nWhich) && ((!bVerticalWriting && !bFrmSelection) || (bFrmSelection && !bFrameHasVerticalColumns)) ) || ((SID_RULER_ROWS_VERTICAL == nWhich) && ((bVerticalWriting && !bFrmSelection) || bFrameHasVerticalColumns))) rSet.DisableItem(nWhich); else if ( IsTabRowFromDoc() || ( rSh.GetTableFmt() && !bFrmSelection && !(nFrmType & FRMTYPE_COLSECT ) ) ) { SwTabCols aTabCols; //no current value necessary sal_uInt16 nNum = 0; if ( 0 != ( bSetTabRowFromDoc = IsTabRowFromDoc() ) ) { rSh.GetMouseTabRows( aTabCols, aTabColFromDocPos ); } else { rSh.GetTabRows( aTabCols ); } // ASSERT(nNum <= aTabCols.Count(), "TabCol not found"); const int nLft = aTabCols.GetLeftMin(); const int nRgt = (sal_uInt16)(bVerticalWriting ? nPageWidth : nPageHeight) - (aTabCols.GetLeftMin() + aTabCols.GetRight()); const sal_uInt16 nL = static_cast< sal_uInt16 >(nLft > 0 ? nLft : 0); const sal_uInt16 nR = static_cast< sal_uInt16 >(nRgt > 0 ? nRgt : 0); SvxColumnItem aColItem(nNum, nL, nR); sal_uInt16 nStart = 0, nEnd; for ( sal_uInt16 i = 0; i < aTabCols.Count(); ++i ) { const SwTabColsEntry& rEntry = aTabCols.GetEntry( i ); if(bVerticalWriting) { nEnd = sal_uInt16(aTabCols.GetRight() - rEntry.nPos); SvxColumnDescription aColDesc( nStart, nEnd, aTabCols.GetRight() - rEntry.nMax, aTabCols.GetRight() - rEntry.nMin, !aTabCols.IsHidden(i) ); aColItem.Append(aColDesc); } else { nEnd = sal_uInt16(rEntry.nPos - aTabCols.GetLeft()); SvxColumnDescription aColDesc( nStart, nEnd, sal_uInt16(rEntry.nMin - aTabCols.GetLeft()), sal_uInt16(rEntry.nMax - aTabCols.GetLeft()), !aTabCols.IsHidden(i) ); aColItem.Append(aColDesc); } nStart = nEnd; } if(bVerticalWriting) nEnd = static_cast< sal_uInt16 >(aTabCols.GetRight()); else nEnd = static_cast< sal_uInt16 >(aTabCols.GetLeft()); // put a position protection when the last row cannot be moved // due to a page break inside of a row if(!aTabCols.IsLastRowAllowedToChange()) bPutContentProtection = sal_True; SvxColumnDescription aColDesc( nStart, nEnd, aTabCols.GetRight(), aTabCols.GetRight(), sal_False ); aColItem.Append(aColDesc); rSet.Put(aColItem, nWhich); } else rSet.DisableItem(nWhich); } break; case SID_RULER_PAGE_POS: { // PAGES01 SvxPagePosSizeItem aPagePosSize( Point( rPageRect.Left(), rPageRect.Top()) , nPageWidth, nPageHeight); rSet.Put(aPagePosSize); break; } case SID_RULER_LR_MIN_MAX: { Rectangle aRectangle; if( ( nFrmType & FRMTYPE_COLSECT ) && !IsTabColFromDoc() && ( nFrmType & ( FRMTYPE_TABLE|FRMTYPE_COLUMN ) ) ) { if( nFrmType & FRMTYPE_TABLE ) { const sal_uInt16 nNum = rSh.GetCurTabColNum(); SwTabCols aTabCols; rSh.GetTabCols( aTabCols ); const int nLft = aTabCols.GetLeftMin() + aTabCols.GetLeft(); const int nRgt = (sal_uInt16)nPageWidth -(aTabCols.GetLeftMin() + aTabCols.GetRight()); const sal_uInt16 nL = static_cast< sal_uInt16 >(nLft > 0 ? nLft : 0); const sal_uInt16 nR = static_cast< sal_uInt16 >(nRgt > 0 ? nRgt : 0); aRectangle.Left() = nL; if(nNum > 1) aRectangle.Left() += aTabCols[nNum - 2]; if(nNum) aRectangle.Left() += MINLAY; if(aTabCols.Count() <= nNum + 1 ) aRectangle.Right() = nR; else aRectangle.Right() = nPageWidth - (nL + aTabCols[nNum + 1]); if(nNum < aTabCols.Count()) aRectangle.Right() += MINLAY; } else { const SwFrmFmt* pFmt = rSh.GetFlyFrmFmt(); const SwFmtCol* pCols = pFmt ? &pFmt->GetCol(): &rDesc.GetMaster().GetCol(); const SwColumns& rCols = pCols->GetColumns(); sal_uInt16 nNum = rSh.GetCurOutColNum(); sal_uInt16 nCount = Min(sal_uInt16(nNum + 1), rCols.Count()); const SwRect aRect( rSh.GetAnyCurRect( pFmt ? RECT_FLY_PRT_EMBEDDED : RECT_PAGE_PRT, pPt )); const SwRect aAbsRect( rSh.GetAnyCurRect( pFmt ? RECT_FLY_EMBEDDED : RECT_PAGE, pPt )); //die Breite im Rahmen bzw. innerhalbe der Seitenraender const sal_uInt16 nTotalWidth = (sal_uInt16)aRect.Width(); //die gesamte Rahmenbreite - die Differenz ist der doppelte Abstand zum Rand const sal_uInt16 nOuterWidth = (sal_uInt16)aAbsRect.Width(); int nWidth = 0, nStart = 0, nEnd = 0; aRectangle.Left() = 0; for ( sal_uInt16 i = 0; i < nCount; ++i ) { SwColumn* pCol = rCols[i]; nStart = pCol->GetLeft() + nWidth; if(i == nNum - 2) aRectangle.Left() = nStart; nWidth += pCols->CalcColWidth( i, nTotalWidth ); nEnd = nWidth - pCol->GetRight(); } aRectangle.Right() = rPageRect.Right() - nEnd; aRectangle.Left() -= rPageRect.Left(); if(nNum > 1) { aRectangle.Left() += MINLAY; aRectangle.Left() += aRect.Left(); } if(pFmt) //Bereich in Rahmen - hier darf man bis zum Rand aRectangle.Left() = aRectangle.Right() = 0; else { // das Rechteck an die richtige absolute Position verschieben aRectangle.Left() += aAbsRect.Left(); aRectangle.Right() -= aAbsRect.Left(); // Abstand zur Umrandung mit einbeziehen aRectangle.Right() -= (nOuterWidth - nTotalWidth) / 2; } if(nNum < rCols.Count()) { aRectangle.Right() += MINLAY; } else // rechts ist jetzt nur noch der Seitenrand aRectangle.Right() = 0; } } else if ( ((nFrmType & FRMTYPE_TABLE) || IsTabColFromDoc()) && !bFrmSelection ) { sal_Bool bColumn; if ( IsTabColFromDoc() ) bColumn = rSh.GetCurMouseColNum( aTabColFromDocPos ) != 0; else bColumn = (nFrmType & (FRMTYPE_COLUMN|FRMTYPE_FLY_ANY|FRMTYPE_COLSECTOUTTAB)) ? sal_True : sal_False; if ( !bColumn ) { if( nFrmType & FRMTYPE_FLY_ANY && IsTabColFromDoc() ) { SwRect aRect( rSh.GetAnyCurRect( RECT_FLY_PRT_EMBEDDED, pPt ) ); aRect.Pos() += rSh.GetAnyCurRect( RECT_FLY_EMBEDDED, pPt ).Pos(); aRectangle.Left() = aRect.Left() - rPageRect.Left(); aRectangle.Right() = rPageRect.Right() - aRect.Right(); } else if( bBrowse ) { aRectangle.Left() = rPagePrtRect.Left(); aRectangle.Right() = nPageWidth - rPagePrtRect.Right(); } else { aRectangle.Left() = aPageLRSpace.GetLeft(); aRectangle.Right() = aPageLRSpace.GetRight(); } } else { //hier nur fuer Tabelle in mehrspaltigen Seiten und Rahmen sal_Bool bSectOutTbl = (nFrmType & FRMTYPE_TABLE) ? sal_True : sal_False; sal_Bool bFrame = (nFrmType & FRMTYPE_FLY_ANY) ? sal_True : sal_False; sal_Bool bColSct = (nFrmType & ( bSectOutTbl ? FRMTYPE_COLSECTOUTTAB : FRMTYPE_COLSECT ) ) ? sal_True : sal_False; //Damit man auch mit der Mouse ziehen kann, //ohne in der Tabelle zu stehen CurRectType eRecType = RECT_PAGE_PRT; sal_uInt16 nNum = IsTabColFromDoc() ? rSh.GetCurMouseColNum( aTabColFromDocPos ): rSh.GetCurOutColNum(); const SwFrmFmt* pFmt = NULL; if( bColSct ) { eRecType = bSectOutTbl ? RECT_OUTTABSECTION : RECT_SECTION; const SwSection *pSect = rSh.GetAnySection( bSectOutTbl, pPt ); ASSERT( pSect, "Welcher Bereich?"); pFmt = pSect->GetFmt(); } else if( bFrame ) { pFmt = rSh.GetFlyFrmFmt(); eRecType = RECT_FLY_PRT_EMBEDDED; } const SwFmtCol* pCols = pFmt ? &pFmt->GetCol(): &rDesc.GetMaster().GetCol(); const SwColumns& rCols = pCols->GetColumns(); const sal_uInt16 nBorder = pFmt ? pFmt->GetBox().GetDistance() : rDesc.GetMaster().GetBox().GetDistance(); /* RECT_FLY_PRT_EMBEDDED returns the relative position to RECT_FLY_EMBEDDED the absolute position must be added here */ SwRect aRect( rSh.GetAnyCurRect( eRecType, pPt ) ); if(RECT_FLY_PRT_EMBEDDED == eRecType) aRect.Pos() += rSh.GetAnyCurRect( RECT_FLY_EMBEDDED, pPt ).Pos(); const sal_uInt16 nTotalWidth = (sal_uInt16)aRect.Width(); //nStart und nEnd initialisieren fuer nNum == 0 int nWidth = 0, nStart = 0, nEnd = nTotalWidth; if( nNum > rCols.Count() ) { ASSERT( !this, "es wird auf dem falschen FmtCol gearbeitet!" ); nNum = rCols.Count(); } for( sal_uInt16 i = 0; i < nNum; ++i ) { SwColumn* pCol = rCols[i]; nStart = pCol->GetLeft() + nWidth; nWidth += pCols->CalcColWidth( i, nTotalWidth ); nEnd = nWidth - pCol->GetRight(); } if( bFrame | bColSct ) { aRectangle.Left() = aRect.Left() - rPageRect.Left() + nStart; aRectangle.Right() = nPageWidth - aRectangle.Left() - nEnd + nStart; } else if(!bBrowse) { aRectangle.Left() = aPageLRSpace.GetLeft() + nStart; aRectangle.Right() = nPageWidth - nEnd - aPageLRSpace.GetLeft(); } else { long nLeft = rPagePrtRect.Left(); aRectangle.Left() = nStart + nLeft; aRectangle.Right() = nPageWidth - nEnd - nLeft; } if(!bFrame) { aRectangle.Left() += nBorder; aRectangle.Right() -= nBorder; } } } else if ( nFrmType & ( FRMTYPE_HEADER | FRMTYPE_FOOTER )) { aRectangle.Left() = aPageLRSpace.GetLeft(); aRectangle.Right() = aPageLRSpace.GetRight(); } else aRectangle.Left() = aRectangle.Right() = 0; SfxRectangleItem aLR( SID_RULER_LR_MIN_MAX , aRectangle); rSet.Put(aLR); } break; case SID_RULER_PROTECT: { if(bFrmSelection) { sal_uInt8 nProtect = pWrtShell->IsSelObjProtected( FLYPROTECT_SIZE|FLYPROTECT_POS|FLYPROTECT_CONTENT ); SvxProtectItem aProt(SID_RULER_PROTECT); aProt.SetCntntProtect((nProtect & FLYPROTECT_CONTENT) != 0); aProt.SetSizeProtect ((nProtect & FLYPROTECT_SIZE) != 0); aProt.SetPosProtect ((nProtect & FLYPROTECT_POS) != 0); rSet.Put(aProt); } else { SvxProtectItem aProtect(SID_RULER_PROTECT); if(bBrowse && !(nFrmType & (FRMTYPE_DRAWOBJ|FRMTYPE_COLUMN)) && !rSh.GetTableFmt()) { aProtect.SetSizeProtect(sal_True); aProtect.SetPosProtect(sal_True); } rSet.Put(aProtect); } } break; } nWhich = aIter.NextWhich(); } if(bPutContentProtection) { SvxProtectItem aProtect(SID_RULER_PROTECT); aProtect.SetCntntProtect(sal_True); rSet.Put(aProtect); } }