xref: /aoo41x/main/svx/source/svdraw/svdedtv.cxx (revision 328f8447)
1 /**************************************************************
2  *
3  * Licensed to the Apache Software Foundation (ASF) under one
4  * or more contributor license agreements.  See the NOTICE file
5  * distributed with this work for additional information
6  * regarding copyright ownership.  The ASF licenses this file
7  * to you under the Apache License, Version 2.0 (the
8  * "License"); you may not use this file except in compliance
9  * with the License.  You may obtain a copy of the License at
10  *
11  *   http://www.apache.org/licenses/LICENSE-2.0
12  *
13  * Unless required by applicable law or agreed to in writing,
14  * software distributed under the License is distributed on an
15  * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
16  * KIND, either express or implied.  See the License for the
17  * specific language governing permissions and limitations
18  * under the License.
19  *
20  *************************************************************/
21 
22 
23 
24 // MARKER(update_precomp.py): autogen include statement, do not remove
25 #include "precompiled_svx.hxx"
26 
27 #include <vcl/metaact.hxx>
28 #include <svx/svdedtv.hxx>
29 #include <svx/svdundo.hxx>
30 #include <svx/svdograf.hxx>  // fuer Possibilities
31 #include <svx/svdopath.hxx>
32 #include <svx/svdoole2.hxx>
33 #include <svx/svdopage.hxx>
34 #include <svx/svdoedge.hxx>
35 #include <svx/svdlayer.hxx>
36 #include <svx/svdpagv.hxx>
37 #include <svx/svdpage.hxx>
38 #include <svx/svdpoev.hxx>  // fuer die PolyPossiblities
39 #include "svx/svdstr.hrc"   // Namen aus der Resource
40 #include "svx/svdglob.hxx"  // StringCache
41 #include <svx/e3dsceneupdater.hxx>
42 #include <svx/svdview.hxx>
43 
44 // #i13033#
45 #include <clonelist.hxx>
46 
47 ////////////////////////////////////////////////////////////////////////////////////////////////////
48 ////////////////////////////////////////////////////////////////////////////////////////////////////
49 //
50 //  @@@@@ @@@@@  @@ @@@@@@  @@ @@ @@ @@@@@ @@   @@
51 //  @@    @@  @@ @@   @@    @@ @@ @@ @@    @@   @@
52 //  @@    @@  @@ @@   @@    @@ @@ @@ @@    @@ @ @@
53 //  @@@@  @@  @@ @@   @@    @@@@@ @@ @@@@  @@@@@@@
54 //  @@    @@  @@ @@   @@     @@@  @@ @@    @@@@@@@
55 //  @@    @@  @@ @@   @@     @@@  @@ @@    @@@ @@@
56 //  @@@@@ @@@@@  @@   @@      @   @@ @@@@@ @@   @@
57 //
58 ////////////////////////////////////////////////////////////////////////////////////////////////////
59 ////////////////////////////////////////////////////////////////////////////////////////////////////
60 
ImpResetPossibilityFlags()61 void SdrEditView::ImpResetPossibilityFlags()
62 {
63 	bReadOnly               =sal_False;
64 
65 	bGroupPossible          =sal_False;
66 	bUnGroupPossible        =sal_False;
67 	bGrpEnterPossible       =sal_False;
68 	bDeletePossible         =sal_False;
69 	bToTopPossible          =sal_False;
70 	bToBtmPossible          =sal_False;
71 	bReverseOrderPossible   =sal_False;
72 
73 	bImportMtfPossible      =sal_False;
74 	bCombinePossible        =sal_False;
75 	bDismantlePossible      =sal_False;
76 	bCombineNoPolyPolyPossible =sal_False;
77 	bDismantleMakeLinesPossible=sal_False;
78 	bOrthoDesiredOnMarked   =sal_False;
79 
80 	bMoreThanOneNotMovable  =sal_False;
81 	bOneOrMoreMovable       =sal_False;
82 	bMoreThanOneNoMovRot    =sal_False;
83 	bContortionPossible     =sal_False;
84 	bAllPolys               =sal_False;
85 	bOneOrMorePolys         =sal_False;
86 	bMoveAllowed            =sal_False;
87 	bResizeFreeAllowed      =sal_False;
88 	bResizePropAllowed      =sal_False;
89 	bRotateFreeAllowed      =sal_False;
90 	bRotate90Allowed        =sal_False;
91 	bMirrorFreeAllowed      =sal_False;
92 	bMirror45Allowed        =sal_False;
93 	bMirror90Allowed        =sal_False;
94 	bTransparenceAllowed	=sal_False;
95 	bGradientAllowed		=sal_False;
96 	bShearAllowed           =sal_False;
97 	bEdgeRadiusAllowed		=sal_False;
98 	bCanConvToPath          =sal_False;
99 	bCanConvToPoly          =sal_False;
100 	bCanConvToContour		=sal_False;
101 	bCanConvToPathLineToArea=sal_False;
102 	bCanConvToPolyLineToArea=sal_False;
103 	bMoveProtect            =sal_False;
104 	bResizeProtect          =sal_False;
105 }
106 
ImpClearVars()107 void SdrEditView::ImpClearVars()
108 {
109 	ImpResetPossibilityFlags();
110 	bPossibilitiesDirty=sal_True;   // << war von Purify angemeckert
111 	bBundleVirtObj=sal_False;
112 }
113 
SdrEditView(SdrModel * pModel1,OutputDevice * pOut)114 SdrEditView::SdrEditView(SdrModel* pModel1, OutputDevice* pOut):
115 	SdrMarkView(pModel1,pOut)
116 {
117 	ImpClearVars();
118 }
119 
~SdrEditView()120 SdrEditView::~SdrEditView()
121 {
122 }
123 
124 ////////////////////////////////////////////////////////////////////////////////////////////////////
125 
InsertNewLayer(const XubString & rName,sal_uInt16 nPos)126 SdrLayer* SdrEditView::InsertNewLayer(const XubString& rName, sal_uInt16 nPos)
127 {
128 	SdrLayerAdmin& rLA=pMod->GetLayerAdmin();
129 	sal_uInt16 nMax=rLA.GetLayerCount();
130 	if (nPos>nMax) nPos=nMax;
131 	SdrLayer* pNewLayer=rLA.NewLayer(rName,nPos);
132 
133 	if( GetModel()->IsUndoEnabled() )
134 		AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewLayer(nPos,rLA,*pMod));
135 
136 	pMod->SetChanged();
137 	return pNewLayer;
138 }
139 
140 #include <svx/svdogrp.hxx>
141 #include <svx/scene3d.hxx>
142 
ImpDelLayerCheck(SdrObjList * pOL,SdrLayerID nDelID) const143 sal_Bool SdrEditView::ImpDelLayerCheck(SdrObjList* pOL, SdrLayerID nDelID) const
144 {
145 	sal_Bool bDelAll(sal_True);
146 	sal_uInt32 nObjAnz(pOL->GetObjCount());
147 
148 	for(sal_uInt32 nObjNum(nObjAnz); nObjNum > 0 && bDelAll;)
149 	{
150 		nObjNum--;
151 		SdrObject* pObj = pOL->GetObj(nObjNum);
152 		SdrObjList* pSubOL = pObj->GetSubList();
153 
154 		// #104809# Test explicitely for group objects and 3d scenes
155 		if(pSubOL && (pObj->ISA(SdrObjGroup) || pObj->ISA(E3dScene)))
156 		{
157 			if(!ImpDelLayerCheck(pSubOL, nDelID))
158 			{
159 				// Rekursion
160 				bDelAll = sal_False;
161 			}
162 		}
163 		else
164 		{
165 			if(pObj->GetLayer() != nDelID)
166 			{
167 				bDelAll = sal_False;
168 			}
169 		}
170 	}
171 
172 	return bDelAll;
173 }
174 
ImpDelLayerDelObjs(SdrObjList * pOL,SdrLayerID nDelID)175 void SdrEditView::ImpDelLayerDelObjs(SdrObjList* pOL, SdrLayerID nDelID)
176 {
177 	sal_uInt32 nObjAnz(pOL->GetObjCount());
178 	// make sure OrdNums are correct
179 	pOL->GetObj(0)->GetOrdNum();
180 
181 	const bool bUndo = GetModel()->IsUndoEnabled();
182 
183 	for(sal_uInt32 nObjNum(nObjAnz); nObjNum > 0;)
184 	{
185 		nObjNum--;
186 		SdrObject* pObj = pOL->GetObj(nObjNum);
187 		SdrObjList* pSubOL = pObj->GetSubList();
188 
189 
190 		// #104809# Test explicitely for group objects and 3d scenes
191 		if(pSubOL && (pObj->ISA(SdrObjGroup) || pObj->ISA(E3dScene)))
192 		{
193 			if(ImpDelLayerCheck(pSubOL, nDelID))
194 			{
195 				if( bUndo )
196 					AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pObj, true));
197 				pOL->RemoveObject(nObjNum);
198 
199 				if( !bUndo )
200 					SdrObject::Free( pObj );
201 			}
202 			else
203 			{
204 				ImpDelLayerDelObjs(pSubOL, nDelID);
205 			}
206 		}
207 		else
208 		{
209 			if(pObj->GetLayer() == nDelID)
210 			{
211 				if( bUndo )
212 					AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pObj, true));
213 				pOL->RemoveObject(nObjNum);
214 				if( !bUndo )
215 					SdrObject::Free( pObj );
216 			}
217 		}
218 	}
219 }
220 
DeleteLayer(const XubString & rName)221 void SdrEditView::DeleteLayer(const XubString& rName)
222 {
223 	SdrLayerAdmin& rLA = pMod->GetLayerAdmin();
224 	SdrLayer* pLayer = rLA.GetLayer(rName, sal_True);
225 	sal_uInt16 nLayerNum(rLA.GetLayerPos(pLayer));
226 
227 	if(SDRLAYER_NOTFOUND != nLayerNum)
228 	{
229 
230 		SdrLayerID nDelID = pLayer->GetID();
231 
232 		const bool bUndo = IsUndoEnabled();
233 		if( bUndo )
234 			BegUndo(ImpGetResStr(STR_UndoDelLayer));
235 
236 		sal_Bool bMaPg(sal_True);
237 
238 		for(sal_uInt16 nPageKind(0); nPageKind < 2; nPageKind++)
239 		{
240 			// MasterPages and DrawPages
241 			sal_uInt16 nPgAnz(bMaPg ? pMod->GetMasterPageCount() : pMod->GetPageCount());
242 
243 			for(sal_uInt16 nPgNum(0); nPgNum < nPgAnz; nPgNum++)
244 			{
245 				// over all pages
246 				SdrPage* pPage = (bMaPg) ? pMod->GetMasterPage(nPgNum) : pMod->GetPage(nPgNum);
247 				sal_uInt32 nObjAnz(pPage->GetObjCount());
248 
249 				// make sure OrdNums are correct
250 				if(nObjAnz)
251 					pPage->GetObj(0)->GetOrdNum();
252 
253 				for(sal_uInt32 nObjNum(nObjAnz); nObjNum > 0;)
254 				{
255 					nObjNum--;
256 					SdrObject* pObj = pPage->GetObj(nObjNum);
257 					SdrObjList* pSubOL = pObj->GetSubList();
258 
259 					// #104809# Test explicitely for group objects and 3d scenes
260 					if(pSubOL && (pObj->ISA(SdrObjGroup) || pObj->ISA(E3dScene)))
261 					{
262 						if(ImpDelLayerCheck(pSubOL, nDelID))
263 						{
264 							if( bUndo )
265 								AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pObj, true));
266 							pPage->RemoveObject(nObjNum);
267 							if( !bUndo )
268 								SdrObject::Free(pObj);
269 						}
270 						else
271 						{
272 							ImpDelLayerDelObjs(pSubOL, nDelID);
273 						}
274 					}
275 					else
276 					{
277 						if(pObj->GetLayer() == nDelID)
278 						{
279 							if( bUndo )
280 								AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pObj, true));
281 							pPage->RemoveObject(nObjNum);
282 							if( !bUndo )
283 								SdrObject::Free(pObj);
284 						}
285 					}
286 				}
287 			}
288 			bMaPg = sal_False;
289 		}
290 
291 		if( bUndo )
292 		{
293 			AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteLayer(nLayerNum, rLA, *pMod));
294 			rLA.RemoveLayer(nLayerNum);
295 			EndUndo();
296 		}
297 		else
298 		{
299 			delete rLA.RemoveLayer(nLayerNum);
300 		}
301 
302 		pMod->SetChanged();
303 	}
304 }
305 
MoveLayer(const XubString & rName,sal_uInt16 nNewPos)306 void SdrEditView::MoveLayer(const XubString& rName, sal_uInt16 nNewPos)
307 {
308 	SdrLayerAdmin& rLA=pMod->GetLayerAdmin();
309 	SdrLayer* pLayer=rLA.GetLayer(rName,sal_True);
310 	sal_uInt16 nLayerNum=rLA.GetLayerPos(pLayer);
311 	if (nLayerNum!=SDRLAYER_NOTFOUND)
312 	{
313 		if( IsUndoEnabled() )
314 			AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoMoveLayer(nLayerNum,rLA,*pMod,nNewPos));
315 		rLA.MoveLayer(nLayerNum,nNewPos);
316 		pMod->SetChanged();
317 	}
318 }
319 
320 ////////////////////////////////////////////////////////////////////////////////////////////////////
321 
EndUndo()322 void SdrEditView::EndUndo()
323 {
324 	// #i13033#
325 	// Comparison changed to 1L since EndUndo() is called later now
326 	// and EndUndo WILL change count to count-1
327 	if(1L == pMod->GetUndoBracketLevel())
328 	{
329 		ImpBroadcastEdgesOfMarkedNodes();
330 	}
331 
332 	// #i13033#
333 	// moved to bottom to still have access to UNDOs inside of
334 	// ImpBroadcastEdgesOfMarkedNodes()
335 	pMod->EndUndo();
336 }
337 
ImpBroadcastEdgesOfMarkedNodes()338 void SdrEditView::ImpBroadcastEdgesOfMarkedNodes()
339 {
340 	const List& rAllMarkedObjects = GetTransitiveHullOfMarkedObjects();
341 
342 	// #i13033#
343 	// New mechanism to search for necessary disconnections for
344 	// changed connectors inside the transitive hull of all at
345 	// the beginning of UNDO selected objects
346 	for(sal_uInt32 a(0L); a < rAllMarkedObjects.Count(); a++)
347 	{
348 		SdrEdgeObj* pEdge = PTR_CAST(SdrEdgeObj, (SdrObject*)rAllMarkedObjects.GetObject(a));
349 
350 		if(pEdge)
351 		{
352 			SdrObject* pObj1 = pEdge->GetConnectedNode(sal_False);
353 			SdrObject* pObj2 = pEdge->GetConnectedNode(sal_True);
354 
355 			if(pObj1
356 				&& LIST_ENTRY_NOTFOUND == rAllMarkedObjects.GetPos(pObj1)
357 				&& !pEdge->CheckNodeConnection(sal_False))
358 			{
359 				if( IsUndoEnabled() )
360 					AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pEdge));
361 				pEdge->DisconnectFromNode(sal_False);
362 			}
363 
364 			if(pObj2
365 				&& LIST_ENTRY_NOTFOUND == rAllMarkedObjects.GetPos(pObj2)
366 				&& !pEdge->CheckNodeConnection(sal_True))
367 			{
368 				if( IsUndoEnabled() )
369 					AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pEdge));
370 				pEdge->DisconnectFromNode(sal_True);
371 			}
372 		}
373 	}
374 
375 	sal_uIntPtr nMarkedEdgeAnz = GetMarkedEdgesOfMarkedNodes().GetMarkCount();
376 	sal_uInt16 i;
377 
378 	for (i=0; i<nMarkedEdgeAnz; i++) {
379 		SdrMark* pEM = GetMarkedEdgesOfMarkedNodes().GetMark(i);
380 		SdrObject* pEdgeTmp=pEM->GetMarkedSdrObj();
381 		SdrEdgeObj* pEdge=PTR_CAST(SdrEdgeObj,pEdgeTmp);
382 		if (pEdge!=NULL) {
383 			pEdge->SetEdgeTrackDirty();
384 		}
385 	}
386 }
387 
388 ////////////////////////////////////////////////////////////////////////////////////////////////////
389 //
390 //  ####   ###   ####  #### # ####  # #    # ##### # #####  ####
391 //  #   # #   # #     #     # #   # # #    #   #   # #     #
392 //  ####  #   #  ###   ###  # ####  # #    #   #   # ####   ###
393 //  #     #   #     #     # # #   # # #    #   #   # #         #
394 //  #      ###  ####  ####  # ####  # #### #   #   # ##### ####
395 //
396 ////////////////////////////////////////////////////////////////////////////////////////////////////
397 
MarkListHasChanged()398 void SdrEditView::MarkListHasChanged()
399 {
400 	SdrMarkView::MarkListHasChanged();
401 	bPossibilitiesDirty=sal_True;
402 }
403 
ModelHasChanged()404 void SdrEditView::ModelHasChanged()
405 {
406 	SdrMarkView::ModelHasChanged();
407 	bPossibilitiesDirty=sal_True;
408 }
409 
IsResizeAllowed(sal_Bool bProp) const410 sal_Bool SdrEditView::IsResizeAllowed(sal_Bool bProp) const
411 {
412 	ForcePossibilities();
413 	if (bResizeProtect) return sal_False;
414 	if (bProp) return bResizePropAllowed;
415 	return bResizeFreeAllowed;
416 }
417 
IsRotateAllowed(sal_Bool b90Deg) const418 sal_Bool SdrEditView::IsRotateAllowed(sal_Bool b90Deg) const
419 {
420 	ForcePossibilities();
421 	if (bMoveProtect) return sal_False;
422 	if (b90Deg) return bRotate90Allowed;
423 	return bRotateFreeAllowed;
424 }
425 
IsMirrorAllowed(sal_Bool b45Deg,sal_Bool b90Deg) const426 sal_Bool SdrEditView::IsMirrorAllowed(sal_Bool b45Deg, sal_Bool b90Deg) const
427 {
428 	ForcePossibilities();
429 	if (bMoveProtect) return sal_False;
430 	if (b90Deg) return bMirror90Allowed;
431 	if (b45Deg) return bMirror45Allowed;
432 	return bMirrorFreeAllowed && !bMoveProtect;
433 }
434 
IsTransparenceAllowed() const435 sal_Bool SdrEditView::IsTransparenceAllowed() const
436 {
437 	ForcePossibilities();
438 	return bTransparenceAllowed;
439 }
440 
IsGradientAllowed() const441 sal_Bool SdrEditView::IsGradientAllowed() const
442 {
443 	ForcePossibilities();
444 	return bGradientAllowed;
445 }
446 
IsShearAllowed() const447 sal_Bool SdrEditView::IsShearAllowed() const
448 {
449 	ForcePossibilities();
450 	if (bResizeProtect) return sal_False;
451 	return bShearAllowed;
452 }
453 
IsEdgeRadiusAllowed() const454 sal_Bool SdrEditView::IsEdgeRadiusAllowed() const
455 {
456 	ForcePossibilities();
457 	return bEdgeRadiusAllowed;
458 }
459 
IsCrookAllowed(sal_Bool bNoContortion) const460 sal_Bool SdrEditView::IsCrookAllowed(sal_Bool bNoContortion) const
461 {
462 	// CrookMode fehlt hier (weil kein Rotate bei Shear ...)
463 	ForcePossibilities();
464 	if (bNoContortion) {
465 		if (!bRotateFreeAllowed) return sal_False; // Crook is nich
466 		return !bMoveProtect && bMoveAllowed;
467 	} else {
468 		return !bResizeProtect && bContortionPossible;
469 	}
470 }
471 
IsDistortAllowed(sal_Bool bNoContortion) const472 sal_Bool SdrEditView::IsDistortAllowed(sal_Bool bNoContortion) const
473 {
474 	ForcePossibilities();
475 	if (bNoContortion) {
476 		return sal_False;
477 	} else {
478 		return !bResizeProtect && bContortionPossible;
479 	}
480 }
481 
IsCombinePossible(sal_Bool bNoPolyPoly) const482 sal_Bool SdrEditView::IsCombinePossible(sal_Bool bNoPolyPoly) const
483 {
484 	ForcePossibilities();
485 	if (bNoPolyPoly) return bCombineNoPolyPolyPossible;
486 	else return bCombinePossible;
487 }
488 
IsDismantlePossible(sal_Bool bMakeLines) const489 sal_Bool SdrEditView::IsDismantlePossible(sal_Bool bMakeLines) const
490 {
491 	ForcePossibilities();
492 	if (bMakeLines) return bDismantleMakeLinesPossible;
493 	else return bDismantlePossible;
494 }
495 
CheckPossibilities()496 void SdrEditView::CheckPossibilities()
497 {
498 	if (bSomeObjChgdFlag) bPossibilitiesDirty=sal_True;
499 
500 	if(bSomeObjChgdFlag)
501 	{
502 		// This call IS necessary to correct the MarkList, in which
503 		// no longer to the model belonging objects still can reside.
504 		// These ones nned to be removed.
505 		CheckMarked();
506 	}
507 
508 	if (bPossibilitiesDirty) {
509 		ImpResetPossibilityFlags();
510 		SortMarkedObjects();
511 		sal_uIntPtr nMarkAnz=GetMarkedObjectCount();
512 		if (nMarkAnz!=0) {
513 			bReverseOrderPossible=nMarkAnz>=2;
514 
515 			sal_uIntPtr nMovableCount=0;
516 			bGroupPossible=nMarkAnz>=2;
517 			bCombinePossible=nMarkAnz>=2;
518 			if (nMarkAnz==1) {
519 				// bCombinePossible gruendlicher checken
520 				// fehlt noch ...
521 				const SdrObject* pObj=GetMarkedObjectByIndex(0);
522 				//const SdrPathObj* pPath=PTR_CAST(SdrPathObj,pObj);
523 				sal_Bool bGroup=pObj->GetSubList()!=NULL;
524 				sal_Bool bHasText=pObj->GetOutlinerParaObject()!=NULL;
525 				if (bGroup || bHasText) {
526 					bCombinePossible=sal_True;
527 				}
528 			}
529 			bCombineNoPolyPolyPossible=bCombinePossible;
530 			bDeletePossible=sal_True;
531 			// Zu den Transformationen erstmal ja sagen
532 			bMoveAllowed      =sal_True;
533 			bResizeFreeAllowed=sal_True;
534 			bResizePropAllowed=sal_True;
535 			bRotateFreeAllowed=sal_True;
536 			bRotate90Allowed  =sal_True;
537 			bMirrorFreeAllowed=sal_True;
538 			bMirror45Allowed  =sal_True;
539 			bMirror90Allowed  =sal_True;
540 			bShearAllowed     =sal_True;
541 			bEdgeRadiusAllowed=sal_False;
542 			bContortionPossible=sal_True;
543 			bCanConvToContour = sal_True;
544 
545 			// these ones are only allowed when single object is selected
546 			bTransparenceAllowed = (nMarkAnz == 1);
547 			bGradientAllowed = (nMarkAnz == 1);
548 			if(bGradientAllowed)
549 			{
550 				// gradient depends on fillstyle
551 				const SdrMark* pM = GetSdrMarkByIndex(0);
552 				const SdrObject* pObj = pM->GetMarkedSdrObj();
553 
554 				// maybe group object, so get merged ItemSet
555 				const SfxItemSet& rSet = pObj->GetMergedItemSet();
556 				SfxItemState eState = rSet.GetItemState(XATTR_FILLSTYLE, sal_False);
557 
558 				if(SFX_ITEM_DONTCARE != eState)
559 				{
560 					// If state is not DONTCARE, test the item
561 					XFillStyle eFillStyle = ((XFillStyleItem&)(rSet.Get(XATTR_FILLSTYLE))).GetValue();
562 
563 					if(eFillStyle != XFILL_GRADIENT)
564 					{
565 						bGradientAllowed = sal_False;
566 					}
567 				}
568 			}
569 
570 			sal_Bool bNoMovRotFound=sal_False;
571 			const SdrPageView* pPV0=NULL;
572 
573 			for (sal_uIntPtr nm=0; nm<nMarkAnz; nm++) {
574 				const SdrMark* pM=GetSdrMarkByIndex(nm);
575 				const SdrObject* pObj=pM->GetMarkedSdrObj();
576 				const SdrPageView* pPV=pM->GetPageView();
577 				if (pPV!=pPV0) {
578 					if (pPV->IsReadOnly()) bReadOnly=sal_True;
579 					pPV0=pPV;
580 				}
581 
582 				SdrObjTransformInfoRec aInfo;
583 				pObj->TakeObjInfo(aInfo);
584 				sal_Bool bMovPrt=pObj->IsMoveProtect();
585 				sal_Bool bSizPrt=pObj->IsResizeProtect();
586 				if (!bMovPrt && aInfo.bMoveAllowed) nMovableCount++; // Menge der MovableObjs zaehlen
587 				if (bMovPrt) bMoveProtect=sal_True;
588 				if (bSizPrt) bResizeProtect=sal_True;
589 
590 				// not allowed when not allowed at one object
591 				if(!aInfo.bTransparenceAllowed)
592 					bTransparenceAllowed = sal_False;
593 
594 				// Wenn einer was nicht kann, duerfen's alle nicht
595 				if (!aInfo.bMoveAllowed      ) bMoveAllowed      =sal_False;
596 				if (!aInfo.bResizeFreeAllowed) bResizeFreeAllowed=sal_False;
597 				if (!aInfo.bResizePropAllowed) bResizePropAllowed=sal_False;
598 				if (!aInfo.bRotateFreeAllowed) bRotateFreeAllowed=sal_False;
599 				if (!aInfo.bRotate90Allowed  ) bRotate90Allowed  =sal_False;
600 				if (!aInfo.bMirrorFreeAllowed) bMirrorFreeAllowed=sal_False;
601 				if (!aInfo.bMirror45Allowed  ) bMirror45Allowed  =sal_False;
602 				if (!aInfo.bMirror90Allowed  ) bMirror90Allowed  =sal_False;
603 				if (!aInfo.bShearAllowed     ) bShearAllowed     =sal_False;
604 				if (aInfo.bEdgeRadiusAllowed) bEdgeRadiusAllowed=sal_True;
605 				if (aInfo.bNoContortion      ) bContortionPossible=sal_False;
606 				// Fuer Crook mit Contortion: Alle Objekte muessen
607 				// Movable und Rotatable sein, ausser maximal 1
608 				if (!bMoreThanOneNoMovRot) {
609 					if (!aInfo.bMoveAllowed || !aInfo.bResizeFreeAllowed) {
610 						bMoreThanOneNoMovRot=bNoMovRotFound;
611 						bNoMovRotFound=sal_True;
612 					}
613 				}
614 
615 				// when one member cannot be converted, no conversion is possible
616 				if(!aInfo.bCanConvToContour)
617 					bCanConvToContour = sal_False;
618 
619 				// Ungroup
620 				if (!bUnGroupPossible) bUnGroupPossible=pObj->GetSubList()!=NULL;
621 				// ConvertToCurve: Wenn mind. einer konvertiert werden kann ist das ok.
622 				if (aInfo.bCanConvToPath          ) bCanConvToPath          =sal_True;
623 				if (aInfo.bCanConvToPoly          ) bCanConvToPoly          =sal_True;
624 				if (aInfo.bCanConvToPathLineToArea) bCanConvToPathLineToArea=sal_True;
625 				if (aInfo.bCanConvToPolyLineToArea) bCanConvToPolyLineToArea=sal_True;
626 
627 				// Combine/Dismantle
628 				if(bCombinePossible)
629 				{
630 					bCombinePossible = ImpCanConvertForCombine(pObj);
631 					bCombineNoPolyPolyPossible = bCombinePossible;
632 				}
633 
634 				if (!bDismantlePossible) bDismantlePossible = ImpCanDismantle(pObj, sal_False);
635 				if (!bDismantleMakeLinesPossible) bDismantleMakeLinesPossible = ImpCanDismantle(pObj, sal_True);
636 				// OrthoDesiredOnMarked checken
637 				if (!bOrthoDesiredOnMarked && !aInfo.bNoOrthoDesired) bOrthoDesiredOnMarked=sal_True;
638 				// ImportMtf checken
639 
640                 if (!bImportMtfPossible)
641                 {
642                     const SdrGrafObj* pSdrGrafObj = dynamic_cast< const SdrGrafObj* >(pObj);
643                     const SdrOle2Obj* pSdrOle2Obj = dynamic_cast< const SdrOle2Obj* >(pObj);
644 
645                     if(pSdrGrafObj && ((pSdrGrafObj->HasGDIMetaFile() && !pSdrGrafObj->IsEPS()) || pSdrGrafObj->isEmbeddedSvg()))
646                     {
647                         bImportMtfPossible = sal_True;
648                     }
649 
650                     if(pSdrOle2Obj)
651                     {
652                         bImportMtfPossible = pSdrOle2Obj->GetObjRef().is();
653                     }
654                 }
655 			}
656 
657 			bMoreThanOneNotMovable=nMovableCount<nMarkAnz-1;
658 			bOneOrMoreMovable=nMovableCount!=0;
659 			bGrpEnterPossible=bUnGroupPossible;
660 		}
661 		ImpCheckToTopBtmPossible();
662 		((SdrPolyEditView*)this)->ImpCheckPolyPossibilities();
663 		bPossibilitiesDirty=sal_False;
664 
665 		if (bReadOnly) {
666 			sal_Bool bMerker1=bGrpEnterPossible;
667 			ImpResetPossibilityFlags();
668 			bReadOnly=sal_True;
669 			bGrpEnterPossible=bMerker1;
670 		}
671 		if (bMoveAllowed) {
672 			// Verschieben von angeklebten Verbindern unterbinden
673 			// Derzeit nur fuer Einfachselektion implementiert.
674 			if (nMarkAnz==1) {
675 				SdrObject* pObj=GetMarkedObjectByIndex(0);
676 				SdrEdgeObj* pEdge=PTR_CAST(SdrEdgeObj,pObj);
677 				if (pEdge!=NULL) {
678 					SdrObject* pNode1=pEdge->GetConnectedNode(sal_True);
679 					SdrObject* pNode2=pEdge->GetConnectedNode(sal_False);
680 					if (pNode1!=NULL || pNode2!=NULL) bMoveAllowed=sal_False;
681 				}
682 			}
683 		}
684 	}
685 }
686 
687 ////////////////////////////////////////////////////////////////////////////////////////////////////
688 
ForceMarkedObjToAnotherPage()689 void SdrEditView::ForceMarkedObjToAnotherPage()
690 {
691 	sal_Bool bFlg=sal_False;
692 	for (sal_uIntPtr nm=0; nm<GetMarkedObjectCount(); nm++) {
693 		SdrMark* pM=GetSdrMarkByIndex(nm);
694 		SdrObject* pObj=pM->GetMarkedSdrObj();
695 		Rectangle aObjRect(pObj->GetCurrentBoundRect());
696 		Rectangle aPgRect(pM->GetPageView()->GetPageRect());
697 		if (!aObjRect.IsOver(aPgRect)) {
698 			sal_Bool bFnd=sal_False;
699 			SdrPageView* pPV = GetSdrPageView();
700 
701 			if(pPV)
702 			{
703 				bFnd = aObjRect.IsOver(pPV->GetPageRect());
704 			}
705 
706 			if(bFnd)
707 			{
708 				pM->GetPageView()->GetObjList()->RemoveObject(pObj->GetOrdNum());
709 				SdrInsertReason aReason(SDRREASON_VIEWCALL);
710 				pPV->GetObjList()->InsertObject(pObj,CONTAINER_APPEND,&aReason);
711 				pM->SetPageView(pPV);
712 				InvalidateAllWin(aObjRect);
713 				bFlg=sal_True;
714 			}
715 		}
716 	}
717 	if (bFlg) {
718 		MarkListHasChanged();
719 	}
720 }
721 
DeleteMarkedList(const SdrMarkList & rMark)722 void SdrEditView::DeleteMarkedList(const SdrMarkList& rMark)
723 {
724 	if (rMark.GetMarkCount()!=0)
725 	{
726 		rMark.ForceSort();
727 
728 		const bool bUndo = IsUndoEnabled();
729 		if( bUndo )
730 			BegUndo();
731 		const sal_uInt32 nMarkAnz(rMark.GetMarkCount());
732 
733         if(nMarkAnz)
734         {
735 		    sal_uInt32 nm(0);
736             std::vector< E3DModifySceneSnapRectUpdater* > aUpdaters;
737 
738 			if( bUndo )
739 			{
740 				for(nm = nMarkAnz; nm > 0;)
741 				{
742 					nm--;
743 					SdrMark* pM = rMark.GetMark(nm);
744     				SdrObject* pObj = pM->GetMarkedSdrObj();
745 
746 					// extra undo actions for changed connector which now may hold it's layouted path (SJ)
747 					std::vector< SdrUndoAction* > vConnectorUndoActions( CreateConnectorUndo( *pObj ) );
748 					AddUndoActions( vConnectorUndoActions );
749 
750 					AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoDeleteObject(*pObj));
751 				}
752 			}
753 
754             // Sicherstellen, dass die OrderNums stimmen:
755 		    rMark.GetMark(0)->GetMarkedSdrObj()->GetOrdNum();
756 
757 			std::vector< SdrObject* > aRemoved3DObjects;
758 
759             for(nm = nMarkAnz; nm > 0;)
760             {
761 			    nm--;
762 			    SdrMark* pM = rMark.GetMark(nm);
763 			    SdrObject* pObj = pM->GetMarkedSdrObj();
764 			    SdrObjList*  pOL = pObj->GetObjList(); //#52680#
765 			    const sal_uInt32 nOrdNum(pObj->GetOrdNumDirect());
766 
767 				bool bIs3D = dynamic_cast< E3dObject* >(pObj);
768                 // set up a scene updater if object is a 3d object
769                 if(bIs3D)
770                 {
771                     aUpdaters.push_back(new E3DModifySceneSnapRectUpdater(pObj));
772                 }
773 
774                 pOL->RemoveObject(nOrdNum);
775 
776 				if( !bUndo )
777 				{
778 					if( bIs3D )
779 						aRemoved3DObjects.push_back( pObj ); // may be needed later
780 					else
781 						SdrObject::Free(pObj);
782 				}
783 		    }
784 
785             // fire scene updaters
786             while(!aUpdaters.empty())
787             {
788                 delete aUpdaters.back();
789                 aUpdaters.pop_back();
790             }
791 
792 			if( !bUndo )
793 			{
794 				// now delete removed scene objects
795 				while(!aRemoved3DObjects.empty())
796 				{
797 					SdrObject::Free( aRemoved3DObjects.back() );
798 					aRemoved3DObjects.pop_back();
799 				}
800 			}
801 		}
802 
803 		if( bUndo )
804 			EndUndo();
805 	}
806 }
807 
DeleteMarkedObj()808 void SdrEditView::DeleteMarkedObj()
809 {
810     // #i110981# return when nothing is to be done at all
811     if(!GetMarkedObjectCount())
812     {
813         return;
814     }
815 
816 	// moved breaking action and undo start outside loop
817 	BrkAction();
818 	BegUndo(ImpGetResStr(STR_EditDelete),GetDescriptionOfMarkedObjects(),SDRREPFUNC_OBJ_DELETE);
819 
820 	// remove as long as something is selected. This allows to schedule objects for
821 	// removal for a next run as needed
822 	while(GetMarkedObjectCount())
823 	{
824 		// vector to remember the parents which may be empty after object removal
825 		std::vector< SdrObject* > aParents;
826 
827 		{
828 			const SdrMarkList& rMarkList = GetMarkedObjectList();
829 			const sal_uInt32 nCount(rMarkList.GetMarkCount());
830 			sal_uInt32 a(0);
831 
832 			for(a = 0; a < nCount; a++)
833 			{
834 				// in the first run, add all found parents, but only once
835 			    SdrMark* pMark = rMarkList.GetMark(a);
836 				SdrObject* pObject = pMark->GetMarkedSdrObj();
837 				SdrObject* pParent = pObject->GetObjList()->GetOwnerObj();
838 
839 				if(pParent)
840 				{
841 					if(!aParents.empty())
842 					{
843 						std::vector< SdrObject* >::iterator aFindResult =
844 							std::find(aParents.begin(), aParents.end(), pParent);
845 
846 						if(aFindResult == aParents.end())
847 						{
848 							aParents.push_back(pParent);
849 						}
850 					}
851 					else
852 					{
853 						aParents.push_back(pParent);
854 					}
855 				}
856 			}
857 
858 			if(!aParents.empty())
859 			{
860 				// in a 2nd run, remove all objects which may already be scheduled for
861 				// removal. I am not sure if this can happen, but theoretically
862 				// a to-be-removed object may already be the group/3DScene itself
863 				for(a = 0; a < nCount; a++)
864 				{
865 					SdrMark* pMark = rMarkList.GetMark(a);
866 					SdrObject* pObject = pMark->GetMarkedSdrObj();
867 
868 					std::vector< SdrObject* >::iterator aFindResult =
869 						std::find(aParents.begin(), aParents.end(), pObject);
870 
871 					if(aFindResult != aParents.end())
872 					{
873 						aParents.erase(aFindResult);
874 					}
875 				}
876 			}
877 		}
878 
879 		// original stuff: remove selected objects. Handle clear will
880 		// do something only once
881 		DeleteMarkedList(GetMarkedObjectList());
882 		GetMarkedObjectListWriteAccess().Clear();
883 		aHdl.Clear();
884 
885 		while(aParents.size() && !GetMarkedObjectCount())
886 		{
887 			// iterate over remembered parents
888 			SdrObject* pParent = aParents.back();
889 			aParents.pop_back();
890 
891 			if(pParent->GetSubList() && 0 == pParent->GetSubList()->GetObjCount())
892 			{
893 				// we detected an empty parent, a candidate to leave group/3DScene
894 				// if entered
895 				if(GetSdrPageView()->GetAktGroup()
896 					&& GetSdrPageView()->GetAktGroup() == pParent)
897 				{
898 					GetSdrPageView()->LeaveOneGroup();
899 				}
900 
901 				// schedule empty parent for removal
902 				GetMarkedObjectListWriteAccess().InsertEntry(
903 					SdrMark(pParent, GetSdrPageView()));
904 			}
905 		}
906 	}
907 
908 	// end undo and change messaging moved at the end
909 	EndUndo();
910 	MarkListHasChanged();
911 }
912 
CopyMarkedObj()913 void SdrEditView::CopyMarkedObj()
914 {
915 	SortMarkedObjects();
916 
917 	SdrMarkList aSourceObjectsForCopy(GetMarkedObjectList());
918 	// Folgende Schleife Anstatt MarkList::Merge(), damit
919 	// ich jeweils mein Flag an die MarkEntries setzen kann.
920 	sal_uIntPtr nEdgeAnz = GetEdgesOfMarkedNodes().GetMarkCount();
921 	for (sal_uIntPtr nEdgeNum=0; nEdgeNum<nEdgeAnz; nEdgeNum++) {
922 		SdrMark aM(*GetEdgesOfMarkedNodes().GetMark(nEdgeNum));
923 		aM.SetUser(1);
924 		aSourceObjectsForCopy.InsertEntry(aM);
925 	}
926 	aSourceObjectsForCopy.ForceSort();
927 
928 	// #i13033#
929 	// New mechanism to re-create the connections of cloned connectors
930 	CloneList aCloneList;
931 
932 	const bool bUndo = IsUndoEnabled();
933 
934 	GetMarkedObjectListWriteAccess().Clear();
935 	sal_uIntPtr nCloneErrCnt=0;
936 	sal_uIntPtr nMarkAnz=aSourceObjectsForCopy.GetMarkCount();
937 	sal_uIntPtr nm;
938 	for (nm=0; nm<nMarkAnz; nm++) {
939 		SdrMark* pM=aSourceObjectsForCopy.GetMark(nm);
940 		SdrObject* pO=pM->GetMarkedSdrObj()->Clone();
941 		if (pO!=NULL) {
942 			SdrInsertReason aReason(SDRREASON_VIEWCALL);
943 			pM->GetPageView()->GetObjList()->InsertObject(pO,CONTAINER_APPEND,&aReason);
944 
945 			if( bUndo )
946 				AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoCopyObject(*pO));
947 
948 			SdrMark aME(*pM);
949 			aME.SetMarkedSdrObj(pO);
950 			aCloneList.AddPair(pM->GetMarkedSdrObj(), pO);
951 
952 			if (pM->GetUser()==0)
953 			{
954 				// Sonst war's nur eine mitzukierende Edge
955 				GetMarkedObjectListWriteAccess().InsertEntry(aME);
956 			}
957 		} else {
958 			nCloneErrCnt++;
959 		}
960 	}
961 
962 	// #i13033#
963 	// New mechanism to re-create the connections of cloned connectors
964 	aCloneList.CopyConnections();
965 
966 	if(0L != nCloneErrCnt)
967 	{
968 #ifdef DBG_UTIL
969 		ByteString aStr("SdrEditView::CopyMarkedObj(): Fehler beim Clonen ");
970 
971 		if(nCloneErrCnt == 1)
972 		{
973 			aStr += "eines Zeichenobjekts.";
974 		}
975 		else
976 		{
977 			aStr += "von ";
978 			aStr += ByteString::CreateFromInt32( nCloneErrCnt );
979 			aStr += " Zeichenobjekten.";
980 		}
981 
982 		aStr += " Objektverbindungen werden nicht mitkopiert.";
983 		DBG_ERROR(aStr.GetBuffer());
984 #endif
985 	}
986 	MarkListHasChanged();
987 }
988 
989 ////////////////////////////////////////////////////////////////////////////////////////////////////
990 
InsertObjectAtView(SdrObject * pObj,SdrPageView & rPV,sal_uIntPtr nOptions)991 sal_Bool SdrEditView::InsertObjectAtView(SdrObject* pObj, SdrPageView& rPV, sal_uIntPtr nOptions)
992 {
993 	if ((nOptions & SDRINSERT_SETDEFLAYER)!=0) {
994 		SdrLayerID nLayer=rPV.GetPage()->GetLayerAdmin().GetLayerID(aAktLayer,sal_True);
995 		if (nLayer==SDRLAYER_NOTFOUND) nLayer=0;
996 		if (rPV.GetLockedLayers().IsSet(nLayer) || !rPV.GetVisibleLayers().IsSet(nLayer)) {
997 			SdrObject::Free( pObj ); // Layer gesperrt oder nicht sichtbar
998 			return sal_False;
999 		}
1000 		pObj->NbcSetLayer(nLayer);
1001 	}
1002 	if ((nOptions & SDRINSERT_SETDEFATTR)!=0) {
1003 		if (pDefaultStyleSheet!=NULL) pObj->NbcSetStyleSheet(pDefaultStyleSheet, sal_False);
1004 		pObj->SetMergedItemSet(aDefaultAttr);
1005 	}
1006 	if (!pObj->IsInserted()) {
1007 		SdrInsertReason aReason(SDRREASON_VIEWCALL);
1008 		if ((nOptions & SDRINSERT_NOBROADCAST)!=0) {
1009 			rPV.GetObjList()->NbcInsertObject(pObj,CONTAINER_APPEND,&aReason);
1010 		} else {
1011 			rPV.GetObjList()->InsertObject(pObj,CONTAINER_APPEND,&aReason);
1012 		}
1013 	}
1014 	if( IsUndoEnabled() )
1015 		AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pObj));
1016 
1017 	if ((nOptions & SDRINSERT_DONTMARK)==0) {
1018 		if ((nOptions & SDRINSERT_ADDMARK)==0) UnmarkAllObj();
1019 		MarkObj(pObj,&rPV);
1020 	}
1021 	return sal_True;
1022 }
1023 
ReplaceObjectAtView(SdrObject * pOldObj,SdrPageView & rPV,SdrObject * pNewObj,sal_Bool bMark)1024 void SdrEditView::ReplaceObjectAtView(SdrObject* pOldObj, SdrPageView& rPV, SdrObject* pNewObj, sal_Bool bMark)
1025 {
1026     if(IsTextEdit())
1027     {
1028 #ifdef DBG_UTIL
1029         if(pOldObj && dynamic_cast< SdrTextObj* >(pOldObj) && static_cast< SdrTextObj* >(pOldObj)->IsTextEditActive())
1030         {
1031             OSL_ENSURE(false, "OldObject is in TextEdit mode, this has to be ended before replacing it usnig SdrEndTextEdit (!)");
1032         }
1033 
1034         if(pNewObj && dynamic_cast< SdrTextObj* >(pNewObj) && static_cast< SdrTextObj* >(pNewObj)->IsTextEditActive())
1035         {
1036             OSL_ENSURE(false, "NewObject is in TextEdit mode, this has to be ended before replacing it usnig SdrEndTextEdit (!)");
1037         }
1038 #endif
1039 
1040         // #123468# emergency repair situation, needs to cast up to a class derived from
1041         // this one; (aw080 has a mechanism for that and the view hierarchy is secured to
1042         // always be a SdrView)
1043         if(dynamic_cast< SdrView* >(this)) static_cast< SdrView* >(this)->SdrEndTextEdit();
1044     }
1045 
1046 	SdrObjList* pOL=pOldObj->GetObjList();
1047 	const bool bUndo = IsUndoEnabled();
1048 	if( bUndo  )
1049 		AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoReplaceObject(*pOldObj,*pNewObj));
1050 
1051 	if( IsObjMarked( pOldObj ) )
1052 	    MarkObj( pOldObj, &rPV, sal_True /*unmark!*/ );
1053 
1054 	pOL->ReplaceObject(pNewObj,pOldObj->GetOrdNum());
1055 
1056 	if( !bUndo )
1057 		SdrObject::Free( pOldObj );
1058 
1059 	if (bMark) MarkObj(pNewObj,&rPV);
1060 }
1061 
1062 ////////////////////////////////////////////////////////////////////////////////////////////////////
1063 
IsUndoEnabled() const1064 bool SdrEditView::IsUndoEnabled() const
1065 {
1066 	return pMod->IsUndoEnabled();
1067 }
1068