xref: /aoo42x/main/sw/source/core/view/vnew.cxx (revision 86e1cf34)

/**************************************************************
 *
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 *
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_sw.hxx"


#include <sfx2/printer.hxx>
#include <rtl/logfile.hxx>
#include <doc.hxx>
#include <IDocumentUndoRedo.hxx>
#include <docsh.hxx>
#include <viewsh.hxx>
#include <rootfrm.hxx>
#include <viewimp.hxx>
#include <viewopt.hxx>
#include <txtfrm.hxx>		// Zugriff auf TxtCache
#include <notxtfrm.hxx>
#include <fntcache.hxx>
#include <docufld.hxx>
#include <ptqueue.hxx>
#include <dview.hxx>		// SdrView
#include <ndgrf.hxx>
#include <ndindex.hxx>
#include <accessibilityoptions.hxx>
#include <switerator.hxx>

/*************************************************************************
|*
|*	ViewShell::Init()
|*************************************************************************/

void ViewShell::Init( const SwViewOption *pNewOpt )
{
	RTL_LOGFILE_CONTEXT_AUTHOR( aLog, "SW", "JP93722",  "ViewShell::Init" );

	bDocSizeChgd = sal_False;

	// Wir gehen auf Nummer sicher:
	// Wir muessen die alten Fontinformationen wegschmeissen,
	// wenn die Druckeraufloesung oder der Zoomfaktor sich aendert.
	// Init() und Reformat() sind die sichersten Stellen.
	pFntCache->Flush( );

	// ViewOptions werden dynamisch angelegt
	if( !pOpt )
	{
		pOpt = new SwViewOption;

		// Ein ApplyViewOptions braucht nicht gerufen zu werden
		if( pNewOpt )
		{
			*pOpt = *pNewOpt;
			// Der Zoomfaktor muss eingestellt werden, weil in der CTOR-
			// phase aus Performancegruenden kein ApplyViewOptions gerufen wird.
			if( GetWin() && 100 != pOpt->GetZoom() )
			{
				MapMode aMode( pWin->GetMapMode() );
				const Fraction aNewFactor( pOpt->GetZoom(), 100 );
				aMode.SetScaleX( aNewFactor );
				aMode.SetScaleY( aNewFactor );
				pWin->SetMapMode( aMode );
			}
		}
	}

	SwDocShell* pDShell = pDoc->GetDocShell();
	pDoc->set(IDocumentSettingAccess::HTML_MODE, 0 != ::GetHtmlMode( pDShell ) );

	// JP 02.02.99: Bug 61335 - Readonly-Flag an den ViewOptions setzen,
	//				bevor das Layout angelegt wird. Ansonsten muesste man
	//				nochmals durchformatieren!!
	if( pDShell && pDShell->IsReadOnly() )
		pOpt->SetReadonly( sal_True );

	RTL_LOGFILE_CONTEXT_TRACE( aLog, "View::Init - before InitPrt" );

    // --> FME 2007-11-06 #i82967#
    OutputDevice* pPDFOut = 0;
    if ( pOut && pOut->GetPDFWriter() )
        pPDFOut = pOut;
    // <--

    // --> FME 2005-01-21 #i41075#
    // Only setup the printer if we need one:
    const bool bBrowseMode = pOpt->getBrowseMode();
    if( pPDFOut )
        InitPrt( pPDFOut );
    // <--

    // --> FME 2005-03-16 #i44963# Good occasion to check if page sizes in
    // page descriptions are still set to (LONG_MAX, LONG_MAX) (html import)
    if ( !bBrowseMode )
    {
        pDoc->CheckDefaultPageFmt();
    }
    // <--

	RTL_LOGFILE_CONTEXT_TRACE( aLog, "View::Init - after InitPrt" );

	if( GetWin() )
	{
		pOpt->Init( GetWin() );
		GetWin()->SetFillColor();
		GetWin()->SetBackground();
		GetWin()->SetLineColor();
	}

    // Create a new layout, if there is no one available
	if( !pLayout )
    {
        // Here's the code which disables the usage of "multiple" layouts at the moment
        // If the problems with controls and groups objects are solved,
        // this code can be removed...
        ViewShell *pCurrShell = GetDoc()->GetCurrentViewShell();
        if( pCurrShell )
            pLayout = pCurrShell->pLayout;
        // end of "disable multiple layouts"
        if( !pLayout )
		{
			// switched to two step construction because creating the layout in SwRootFrm needs a valid pLayout set
            pLayout = SwRootFrmPtr(new SwRootFrm( pDoc->GetDfltFrmFmt(), this ));//swmod081016
            pLayout->Init( pDoc->GetDfltFrmFmt() );

			// mba: the layout refactoring overlooked an important detail
			// prior to that change, the layout always was destroyed in the dtor of swdoc
			// it is necessary to suppress notifications in the layout when the layout is discarded in its dtor
			// unfortunately this was done by asking whether the doc is in dtor - though the correct question should
			// have been if the rootfrm is in dtor (or even better: discard the layout before the SwRootFrm is destroyed!)
			// SwDoc::IsInDtor() is used at several places all over the code that need to be checked whether
			// "pDoc->IsInDtor()" means what is says or in fact should check for "pRootFrm->IsInDtor()". As this will take some time, I decided
			// to postpone that investigations and the changes it will bring to the 3.5 release and for 3.4 make sure
			// that the layout still gets destroyed in the doc dtor. This is done by sharing "the" layout (that we still have) with the doc.
			GetDoc()->ShareLayout( pLayout );
        }
    }
	SizeChgNotify();	//swmod 071108

    // --> #i31958#
    // XForms mode: initialize XForms mode, based on design mode (draw view)
    //   MakeDrawView() requires layout
    if( GetDoc()->isXForms() )
    {
        if( ! HasDrawView() )
            MakeDrawView();
        pOpt->SetFormView( ! GetDrawView()->IsDesignMode() );
    }
    // <-- #i31958#
}

/*************************************************************************
|*
|*	ViewShell::ViewShell()	CTor fuer die erste Shell.
|*************************************************************************/

ViewShell::ViewShell( SwDoc& rDocument, Window *pWindow,
						const SwViewOption *pNewOpt, OutputDevice *pOutput,
						long nFlags )
    :
	aBrowseBorder(),
    pSfxViewShell( 0 ),
    pImp( new SwViewImp( this ) ),
    pWin( pWindow ),
    pOut( pOutput ? pOutput
                  : pWindow ? (OutputDevice*)pWindow
                            : (OutputDevice*)rDocument.getPrinter( true )),
    mpTmpRef( 0 ),
    pOpt( 0 ),
    pAccOptions( new SwAccessibilityOptions ),
	mpTargetPaintWindow(0), // #i74769#
	mpBufferedOut(0), // #i74769#
    pDoc( &rDocument ),
    nStartAction( 0 ),
	nLockPaint( 0 ),
	mnPrePostPaintCount(0L), // #i72754#
	mpPrePostOutDev(0), // #i72754#
	maPrePostMapMode()
{
	RTL_LOGFILE_CONTEXT_AUTHOR( aLog, "SW", "JP93722",  "ViewShell::SwViewShell" );

    // OD 2004-06-01 #i26791# - in order to suppress event handling in
    // <SwDrawContact::Changed> during construction of <ViewShell> instance
    mbInConstructor = true;

	bPaintInProgress = bViewLocked = bInEndAction = bFrameView =
	bEndActionByVirDev = sal_False;
	bPaintWorks = bEnableSmooth = sal_True;
	bPreView = 0 !=( VSHELLFLAG_ISPREVIEW & nFlags );

    // --> OD 2005-02-11 #i38810# - Do not reset modified state of document,
    // if it's already been modified.
    const bool bIsDocModified( pDoc->IsModified() );
    // <--
	pDoc->acquire();
	pOutput = pOut;
	Init( pNewOpt );	//verstellt ggf. das Outdev (InitPrt())
	pOut = pOutput;

    // OD 28.03.2003 #108470# - initialize print preview layout after layout
    // is created in <ViewShell::Init(..)> - called above.
    if ( bPreView )
    {
        // OD 12.12.2002 #103492# - init page preview layout
        pImp->InitPagePreviewLayout();
    }

	SET_CURR_SHELL( this );

	((SwHiddenTxtFieldType*)pDoc->GetSysFldType( RES_HIDDENTXTFLD ))->
        SetHiddenFlag( !pOpt->IsShowHiddenField() );

	//In Init wird ein Standard-FrmFmt angelegt.
    // --> OD 2005-02-11 #i38810#
    if (   !pDoc->GetIDocumentUndoRedo().IsUndoNoResetModified()
        && !bIsDocModified )
    // <--
    {
		pDoc->ResetModified();
    }

	//Format-Cache erweitern.
	if ( SwTxtFrm::GetTxtCache()->GetCurMax() < 2550 )
		SwTxtFrm::GetTxtCache()->IncreaseMax( 100 );
    if( pOpt->IsGridVisible() || getIDocumentDrawModelAccess()->GetDrawModel() )
		Imp()->MakeDrawView();

    // OD 2004-06-01 #i26791#
    mbInConstructor = false;
}

/*************************************************************************
|*
|*	ViewShell::ViewShell()	CTor fuer weitere Shells auf ein Dokument.
|*************************************************************************/

ViewShell::ViewShell( ViewShell& rShell, Window *pWindow,
						OutputDevice *pOutput, long nFlags ) :
	Ring( &rShell ),
    aBrowseBorder( rShell.aBrowseBorder ),
    pSfxViewShell( 0 ),
    pImp( new SwViewImp( this ) ),
    pWin( pWindow ),
	pOut( pOutput ? pOutput
				  : pWindow ? (OutputDevice*)pWindow
                            : (OutputDevice*)rShell.GetDoc()->getPrinter( true )),
    mpTmpRef( 0 ),
	pOpt( 0 ),
    pAccOptions( new SwAccessibilityOptions ),
	mpTargetPaintWindow(0), // #i74769#
	mpBufferedOut(0), // #i74769#
    pDoc( rShell.GetDoc() ),
    nStartAction( 0 ),
	nLockPaint( 0 ),
	mnPrePostPaintCount(0L), // #i72754#
	mpPrePostOutDev(0), // #i72754#
	maPrePostMapMode()
{
    RTL_LOGFILE_CONTEXT_AUTHOR( aLog, "SW", "JP93722",  "ViewShell::SwViewShell" );

    // OD 2004-06-01 #i26791# - in order to suppress event handling in
    // <SwDrawContact::Changed> during construction of <ViewShell> instance
    mbInConstructor = true;

    bPaintWorks = bEnableSmooth = sal_True;
	bPaintInProgress = bViewLocked = bInEndAction = bFrameView =
	bEndActionByVirDev = sal_False;
	bPreView = 0 !=( VSHELLFLAG_ISPREVIEW & nFlags );
	if( nFlags & VSHELLFLAG_SHARELAYOUT ) //swmod 080125
		pLayout = rShell.pLayout;//swmod 080125

	SET_CURR_SHELL( this );

	pDoc->acquire();
	sal_Bool bModified = pDoc->IsModified();

	pOutput = pOut;
	Init( rShell.GetViewOptions() );	//verstellt ggf. das Outdev (InitPrt())
	pOut = pOutput;

    // OD 12.12.2002 #103492#
    if ( bPreView )
        pImp->InitPagePreviewLayout();

	((SwHiddenTxtFieldType*)pDoc->GetSysFldType( RES_HIDDENTXTFLD ))->
            SetHiddenFlag( !pOpt->IsShowHiddenField() );

	// in Init wird ein Standard-FrmFmt angelegt
    if( !bModified && !pDoc->GetIDocumentUndoRedo().IsUndoNoResetModified() )
    {
		pDoc->ResetModified();
    }

	//Format-Cache erweitern.
	if ( SwTxtFrm::GetTxtCache()->GetCurMax() < 2550 )
		SwTxtFrm::GetTxtCache()->IncreaseMax( 100 );
    if( pOpt->IsGridVisible() || getIDocumentDrawModelAccess()->GetDrawModel() )
        Imp()->MakeDrawView();

    // OD 2004-06-01 #i26791#
    mbInConstructor = false;

}

/******************************************************************************
|*
|*	ViewShell::~ViewShell()
|*
******************************************************************************/

ViewShell::~ViewShell()
{
	{
		SET_CURR_SHELL( this );
		bPaintWorks = sal_False;

        // FME 2004-06-21 #i9684# Stopping the animated graphics is not
        // necessary during printing or pdf export, because the animation
        // has not been started in this case.
        if( pDoc && GetWin() )
		{
			SwNodes& rNds = pDoc->GetNodes();
			SwGrfNode *pGNd;

			SwStartNode *pStNd;
			SwNodeIndex aIdx( *rNds.GetEndOfAutotext().StartOfSectionNode(), 1 );
			while ( 0 != (pStNd = aIdx.GetNode().GetStartNode()) )
			{
				aIdx++;
				if ( 0 != ( pGNd = aIdx.GetNode().GetGrfNode() ) )
				{
					if( pGNd->IsAnimated() )
					{
						SwIterator<SwFrm,SwGrfNode> aIter( *pGNd );
						for( SwFrm* pFrm = aIter.First(); pFrm; pFrm = aIter.Next() )
						{
							ASSERT( pFrm->IsNoTxtFrm(), "GraphicNode with Text?" );
							((SwNoTxtFrm*)pFrm)->StopAnimation( pOut );
						}
					}
				}
				aIdx.Assign( *pStNd->EndOfSectionNode(), +1 );
			}

			GetDoc()->StopNumRuleAnimations( pOut );
		}

		delete pImp; //Erst loeschen, damit die LayoutViews vernichtet werden.
		pImp = 0;	// Set to zero, because ~SwFrm relies on it.

		if ( pDoc )
		{
			if( !pDoc->release() )
				delete pDoc, pDoc = 0;
			else
				GetLayout()->ResetNewLayout();
		}//swmod 080317

		delete pOpt;

		//Format-Cache zurueckschrauben.
		if ( SwTxtFrm::GetTxtCache()->GetCurMax() > 250 )
			SwTxtFrm::GetTxtCache()->DecreaseMax( 100 );

		//Ggf. aus der PaintQueue entfernen lassen
		SwPaintQueue::Remove( this );

		ASSERT( !nStartAction, "EndAction() pending." );
	}

	if ( pDoc )
	{
		GetLayout()->DeRegisterShell( this );
		if(pDoc->GetCurrentViewShell()==this)
			pDoc->SetCurrentViewShell( this->GetNext()!=this ?
			(ViewShell*)this->GetNext() : NULL );
	}

    delete mpTmpRef;
    delete pAccOptions;
}

sal_Bool ViewShell::HasDrawView() const
{
	return Imp() ? Imp()->HasDrawView() : 0;
}

void ViewShell::MakeDrawView()
{
	Imp()->MakeDrawView( );
}

SdrView* ViewShell::GetDrawView()
{
	return Imp()->GetDrawView();
}

SdrView* ViewShell::GetDrawViewWithValidMarkList()
{
	SwDrawView* pDView = Imp()->GetDrawView();
	pDView->ValidateMarkList();
	return pDView;
}