xref: /aoo4110/main/sd/source/ui/view/sdview3.cxx (revision b1cdbd2c)
1 /**************************************************************
2  *
3  * Licensed to the Apache Software Foundation (ASF) under one
4  * or more contributor license agreements.  See the NOTICE file
5  * distributed with this work for additional information
6  * regarding copyright ownership.  The ASF licenses this file
7  * to you under the Apache License, Version 2.0 (the
8  * "License"); you may not use this file except in compliance
9  * with the License.  You may obtain a copy of the License at
10  *
11  *   http://www.apache.org/licenses/LICENSE-2.0
12  *
13  * Unless required by applicable law or agreed to in writing,
14  * software distributed under the License is distributed on an
15  * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
16  * KIND, either express or implied.  See the License for the
17  * specific language governing permissions and limitations
18  * under the License.
19  *
20  *************************************************************/
21 
22 // MARKER(update_precomp.py): autogen include statement, do not remove
23 #include "precompiled_sd.hxx"
24 
25 #include "View.hxx"
26 #include <com/sun/star/embed/XEmbedObjectClipboardCreator.hpp>
27 #include <com/sun/star/embed/NoVisualAreaSizeException.hpp>
28 #include <com/sun/star/lang/XComponent.hpp>
29 #include <sot/filelist.hxx>
30 #include <unotools/pathoptions.hxx>
31 #include <editeng/editdata.hxx>
32 #include <svl/urlbmk.hxx>
33 #include <svx/xexch.hxx>
34 #include <svx/xflclit.hxx>
35 #include <svx/xlnclit.hxx>
36 #include <svx/svdpagv.hxx>
37 #include <editeng/eeitem.hxx>
38 #include <editeng/colritem.hxx>
39 #include <sfx2/docfile.hxx>
40 #include <svx/svditer.hxx>
41 #include <svx/svdogrp.hxx>
42 #include <svx/svdoole2.hxx>
43 #include <svx/svdograf.hxx>
44 #include <svx/svdetc.hxx>
45 #include <svx/svdundo.hxx>
46 #include <sfx2/app.hxx>
47 #include <svl/itempool.hxx>
48 #include <sot/clsids.hxx>
49 #include <svx/fmmodel.hxx>
50 #include <sot/formats.hxx>
51 #include <editeng/outliner.hxx>
52 #include <editeng/editeng.hxx>
53 #include <svx/obj3d.hxx>
54 #include <svx/e3dundo.hxx>
55 #include <svx/dbexch.hrc>
56 #include <svx/unomodel.hxx>
57 #include <unotools/streamwrap.hxx>
58 #include <vcl/metaact.hxx>
59 #include <svx/svxids.hrc>
60 #include <toolkit/helper/vclunohelper.hxx>
61 #include "DrawDocShell.hxx"
62 #include "fupoor.hxx"
63 #include "Window.hxx"
64 #include "sdxfer.hxx"
65 #include "sdpage.hxx"
66 #include "DrawViewShell.hxx"
67 #include "drawdoc.hxx"
68 #include "sdresid.hxx"
69 #include "strings.hrc"
70 #include "imapinfo.hxx"
71 #include "SlideSorterViewShell.hxx"
72 #include "strmname.h"
73 #include "unomodel.hxx"
74 #include "ViewClipboard.hxx"
75 #include <sfx2/ipclient.hxx>
76 #include <comphelper/storagehelper.hxx>
77 #include <comphelper/processfactory.hxx>
78 #include <tools/stream.hxx>
79 #include <vcl/cvtgrf.hxx>
80 #include <svx/sdrhittesthelper.hxx>
81 #include <svx/xbtmpit.hxx>
82 
83 // --------------
84 // - Namespaces -
85 // --------------
86 
87 using namespace ::com::sun::star;
88 using namespace ::com::sun::star::lang;
89 using namespace ::com::sun::star::uno;
90 using namespace ::com::sun::star::io;
91 using namespace ::com::sun::star::datatransfer;
92 using namespace ::com::sun::star::datatransfer::clipboard;
93 
94 namespace sd {
95 
96 #define CHECK_FORMAT_TRANS( _def_Type ) ( ( nFormat == (_def_Type) || !nFormat ) && aDataHelper.HasFormat( _def_Type ) )
97 
98 /*************************************************************************
99 |*
100 |* Paste
101 |*
102 \************************************************************************/
103 
104 // #83525#
105 struct ImpRememberOrigAndClone
106 {
107 	SdrObject*		pOrig;
108 	SdrObject*		pClone;
109 };
110 
ImpGetClone(Container & aConnectorContainer,SdrObject * pConnObj)111 SdrObject* ImpGetClone(Container& aConnectorContainer, SdrObject* pConnObj)
112 {
113 	for(sal_uInt32 a(0); a < aConnectorContainer.Count(); a++)
114 	{
115 		if(pConnObj == ((ImpRememberOrigAndClone*)aConnectorContainer.GetObject(a))->pOrig)
116 			return ((ImpRememberOrigAndClone*)aConnectorContainer.GetObject(a))->pClone;
117 	}
118 	return 0L;
119 }
120 
121 // #90129# restrict movement to WorkArea
ImpCheckInsertPos(Point & rPos,const Size & rSize,const Rectangle & rWorkArea)122 void ImpCheckInsertPos(Point& rPos, const Size& rSize, const Rectangle& rWorkArea)
123 {
124 	if(!rWorkArea.IsEmpty())
125 	{
126 		Rectangle aMarkRect(Point(rPos.X() - (rSize.Width() / 2), rPos.Y() - (rSize.Height() / 2)), rSize);
127 
128 		if(!aMarkRect.IsInside(rWorkArea))
129 		{
130 			if(aMarkRect.Left() < rWorkArea.Left())
131 			{
132 				rPos.X() += rWorkArea.Left() - aMarkRect.Left();
133 			}
134 
135 			if(aMarkRect.Right() > rWorkArea.Right())
136 			{
137 				rPos.X() -= aMarkRect.Right() - rWorkArea.Right();
138 			}
139 
140 			if(aMarkRect.Top() < rWorkArea.Top())
141 			{
142 				rPos.Y() += rWorkArea.Top() - aMarkRect.Top();
143 			}
144 
145 			if(aMarkRect.Bottom() > rWorkArea.Bottom())
146 			{
147 				rPos.Y() -= aMarkRect.Bottom() - rWorkArea.Bottom();
148 			}
149 		}
150 	}
151 }
152 
InsertMetaFile(TransferableDataHelper & rDataHelper,const Point & rPos,ImageMap * pImageMap,bool bOptimize)153 bool View::InsertMetaFile( TransferableDataHelper& rDataHelper, const Point& rPos, ImageMap* pImageMap, bool bOptimize )
154 {
155 	GDIMetaFile aMtf;
156 
157 	if( !rDataHelper.GetGDIMetaFile( FORMAT_GDIMETAFILE, aMtf ) )
158 		return false;
159 
160 /*
161 SvFileStream	aSvOutputStream( String( RTL_CONSTASCII_USTRINGPARAM( "/tmp/test.png" ) ), STREAM_WRITE | STREAM_TRUNC );
162 Graphic			aMtfGraphic( aMtf );
163 Size			aPreviewSizePixel( OutputDevice::LogicToLogic( aMtf.GetPrefSize(), aMtf.GetPrefMapMode(), MAP_PIXEL ) );
164 
165 if( aPreviewSizePixel.Width() && aPreviewSizePixel.Height() )
166 {
167 	const double fWH = static_cast< double >( aPreviewSizePixel.Width() ) / static_cast< double >( aPreviewSizePixel.Height() );
168 
169 	if( fWH <= 1.0 )
170 		aPreviewSizePixel.Width() = static_cast< long >( 128.0 * fWH ), aPreviewSizePixel.Height() = 128;
171 	else
172 		aPreviewSizePixel.Width() = 128, aPreviewSizePixel.Height() = static_cast< long >( 128.0 / fWH );
173 
174 	if( GraphicConverter::Export( aSvOutputStream, aMtfGraphic.GetBitmapEx( &aPreviewSizePixel ), CVT_PNG ) )
175 	{
176 		// handle errror case here
177 	}
178 	else
179 	{
180 		// Success
181 	}
182 }
183 */
184 	bool bVector = false;
185 	Graphic aGraphic;
186 
187 	// check if metafile only contains a pixel image, if so insert a bitmap instead
188 	if( bOptimize )
189 	{
190 		MetaAction* pAction = aMtf.FirstAction();
191 		while( pAction && !bVector )
192 		{
193 			switch( pAction->GetType() )
194 			{
195 				case META_POINT_ACTION:
196 				case META_LINE_ACTION:
197 				case META_RECT_ACTION:
198 				case META_ROUNDRECT_ACTION:
199 				case META_ELLIPSE_ACTION:
200 				case META_ARC_ACTION:
201 				case META_PIE_ACTION:
202 				case META_CHORD_ACTION:
203 				case META_POLYLINE_ACTION:
204 				case META_POLYGON_ACTION:
205 				case META_POLYPOLYGON_ACTION:
206 				case META_TEXT_ACTION:
207 				case META_TEXTARRAY_ACTION:
208 				case META_STRETCHTEXT_ACTION:
209 				case META_TEXTRECT_ACTION:
210 				case META_GRADIENT_ACTION:
211 				case META_HATCH_ACTION:
212 				case META_WALLPAPER_ACTION:
213 				case META_EPS_ACTION:
214 				case META_TEXTLINE_ACTION:
215 				case META_FLOATTRANSPARENT_ACTION:
216 				case META_GRADIENTEX_ACTION:
217 				case META_BMPSCALEPART_ACTION:
218 				case META_BMPEXSCALEPART_ACTION:
219 					bVector = true;
220 					break;
221 				case META_BMP_ACTION:
222 				case META_BMPSCALE_ACTION:
223 				case META_BMPEX_ACTION:
224 				case META_BMPEXSCALE_ACTION:
225 					if( aGraphic.GetType() != GRAPHIC_NONE )
226 					{
227 						bVector = true;
228 					}
229 					else switch( pAction->GetType() )
230 					{
231 						case META_BMP_ACTION:
232 							{
233 								MetaBmpAction* pBmpAction = dynamic_cast< MetaBmpAction* >( pAction );
234 								if( pBmpAction )
235 									aGraphic = Graphic( pBmpAction->GetBitmap() );
236 							}
237 							break;
238 						case META_BMPSCALE_ACTION:
239 							{
240 								MetaBmpScaleAction* pBmpScaleAction = dynamic_cast< MetaBmpScaleAction* >( pAction );
241 								if( pBmpScaleAction )
242 									aGraphic = Graphic( pBmpScaleAction->GetBitmap() );
243 							}
244 							break;
245 						case META_BMPEX_ACTION:
246 							{
247 								MetaBmpExAction* pBmpExAction = dynamic_cast< MetaBmpExAction* >( pAction );
248 								if( pBmpExAction )
249 									aGraphic = Graphic( pBmpExAction->GetBitmapEx() );
250 							}
251 							break;
252 						case META_BMPEXSCALE_ACTION:
253 							{
254 								MetaBmpExScaleAction* pBmpExScaleAction = dynamic_cast< MetaBmpExScaleAction* >( pAction );
255 								if( pBmpExScaleAction )
256 									aGraphic = Graphic( pBmpExScaleAction->GetBitmapEx() );
257 							}
258 							break;
259 					}
260 			}
261 
262 			pAction = aMtf.NextAction();
263 		}
264 	}
265 
266 	// it is not a vector metafile but it also has no graphic?
267 	if( !bVector && (aGraphic.GetType() == GRAPHIC_NONE) )
268 		bVector = true;
269 
270 	// #90129# restrict movement to WorkArea
271 	Point aInsertPos( rPos );
272 	Size aImageSize;
273 	aImageSize = bVector ? aMtf.GetPrefSize() : aGraphic.GetSizePixel();
274 	ImpCheckInsertPos(aInsertPos, aImageSize, GetWorkArea());
275 
276 	if( bVector )
277 		aGraphic = Graphic( aMtf );
278 
279 	aGraphic.SetPrefMapMode( aMtf.GetPrefMapMode() );
280 	aGraphic.SetPrefSize( aMtf.GetPrefSize() );
281 	InsertGraphic( aGraphic, mnAction, aInsertPos, NULL, pImageMap );
282 
283 	return true;
284 }
285 
InsertData(const TransferableDataHelper & rDataHelper,const Point & rPos,sal_Int8 & rDnDAction,sal_Bool bDrag,sal_uLong nFormat,sal_uInt16 nPage,sal_uInt16 nLayer)286 sal_Bool View::InsertData( const TransferableDataHelper& rDataHelper,
287 						 const Point& rPos, sal_Int8& rDnDAction, sal_Bool bDrag,
288 						 sal_uLong nFormat, sal_uInt16 nPage, sal_uInt16 nLayer )
289 {
290 	maDropPos = rPos;
291 	mnAction = rDnDAction;
292 	mbIsDropAllowed = sal_False;
293 
294 	TransferableDataHelper	aDataHelper( rDataHelper );
295 	SdrObject*				pPickObj = NULL;
296 	SdPage*					pPage = NULL;
297 	ImageMap*				pImageMap = NULL;
298 	bool bReturn = false;
299 	sal_Bool					bLink = ( ( mnAction & DND_ACTION_LINK ) != 0 );
300 	sal_Bool					bCopy = ( ( ( mnAction & DND_ACTION_COPY ) != 0 ) || bLink );
301 	sal_uLong					nPasteOptions = SDRINSERT_SETDEFLAYER;
302 
303     if (mpViewSh != NULL)
304     {
305         OSL_ASSERT (mpViewSh->GetViewShell()!=NULL);
306         SfxInPlaceClient* pIpClient = mpViewSh->GetViewShell()->GetIPClient();
307         if( mpViewSh->ISA(::sd::slidesorter::SlideSorterViewShell)
308             || (pIpClient!=NULL && pIpClient->IsObjectInPlaceActive()))
309         nPasteOptions |= SDRINSERT_DONTMARK;
310     }
311 
312 	if( bDrag )
313 	{
314 		SdrPageView* pPV = NULL;
315 		PickObj( rPos, getHitTolLog(), pPickObj, pPV );
316 	}
317 
318 	if( nPage != SDRPAGE_NOTFOUND )
319 		pPage = (SdPage*) mpDoc->GetPage( nPage );
320 
321 	SdTransferable* pOwnData = NULL;
322     SdTransferable* pImplementation = SdTransferable::getImplementation( aDataHelper.GetTransferable() );
323 
324     if(pImplementation && (rDnDAction & DND_ACTION_LINK))
325     {
326         // suppress own data when it's intention is to use it as fill information
327         pImplementation = 0;
328     }
329 
330 	// try to get own transfer data
331 	if( pImplementation )
332 	{
333 		if( SD_MOD()->pTransferClip == (SdTransferable*) pImplementation )
334 			pOwnData = SD_MOD()->pTransferClip;
335 		else if( SD_MOD()->pTransferDrag == (SdTransferable*) pImplementation )
336 			pOwnData = SD_MOD()->pTransferDrag;
337 		else if( SD_MOD()->pTransferSelection == (SdTransferable*) pImplementation )
338 			pOwnData = SD_MOD()->pTransferSelection;
339 	}
340 
341 	// ImageMap?
342 	if( !pOwnData && aDataHelper.HasFormat( SOT_FORMATSTR_ID_SVIM ) )
343 	{
344 		SotStorageStreamRef xStm;
345 
346 		if( aDataHelper.GetSotStorageStream( SOT_FORMATSTR_ID_SVIM, xStm ) )
347 		{
348 			pImageMap = new ImageMap;
349             // mba: clipboard always must contain absolute URLs (could be from alien source)
350             pImageMap->Read( *xStm, String() );
351 		}
352 	}
353 
354 	bool bTable = false;
355 	// check special cases for pasting table formats as RTL
356 	if( !bLink && (!nFormat || (nFormat == SOT_FORMAT_RTF)) )
357 	{
358 		// if the objekt supports rtf and there is a table involved, default is to create a table
359 		if( aDataHelper.HasFormat( SOT_FORMAT_RTF ) && ! aDataHelper.HasFormat( SOT_FORMATSTR_ID_DRAWING ) )
360 		{
361 			SotStorageStreamRef xStm;
362 
363 			if( aDataHelper.GetSotStorageStream( FORMAT_RTF, xStm ) )
364 			{
365 				xStm->Seek( 0 );
366 
367 				ByteString aLine;
368 				while( xStm->ReadLine(aLine) )
369 				{
370 					xub_StrLen x = aLine.Search( "\\trowd" );
371 					if( x != STRING_NOTFOUND )
372 					{
373 						bTable = true;
374 						nFormat = FORMAT_RTF;
375 						break;
376 					}
377 				}
378 			}
379 		}
380 	}
381 
382     // Changed the whole decision tree to be dependent of bReturn as a flag that
383     // the work was done; this allows to check multiple formats and not just fail
384     // when a CHECK_FORMAT_TRANS(*format*) detected format does not work. This is
385     // e.g. necessary for FORMAT_BITMAP
386     if( pOwnData && !nFormat )
387 	{
388 		const View* pSourceView = pOwnData->GetView();
389 
390         if( pOwnData->GetDocShell() && pOwnData->IsPageTransferable() && ISA( View ) )
391 		{
392             mpClipboard->HandlePageDrop (*pOwnData);
393 		}
394         else if( pSourceView )
395 		{
396 			if( pSourceView == this )
397 			{
398 				// same view
399 				if( nLayer != SDRLAYER_NOTFOUND )
400 				{
401 					// drop on layer tab bar
402 					SdrLayerAdmin&	rLayerAdmin = mpDoc->GetLayerAdmin();
403 					SdrLayer*		pLayer = rLayerAdmin.GetLayerPerID( nLayer );
404 					SdrPageView*	pPV = GetSdrPageView();
405 					String			aLayer( pLayer->GetName() );
406 
407 					if( !pPV->IsLayerLocked( aLayer ) )
408 					{
409 						pOwnData->SetInternalMove( sal_True );
410 						SortMarkedObjects();
411 
412 						for( sal_uLong nM = 0; nM < GetMarkedObjectCount(); nM++ )
413 						{
414 							SdrMark*	pM = GetSdrMarkByIndex( nM );
415 							SdrObject*	pO = pM->GetMarkedSdrObj();
416 
417 							if( pO )
418 							{
419 								// #i11702#
420 								if( IsUndoEnabled() )
421 								{
422 									BegUndo(String(SdResId(STR_MODIFYLAYER)));
423 									AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoObjectLayerChange(*pO, pO->GetLayer(), (SdrLayerID)nLayer));
424 									EndUndo();
425 								}
426 
427 								pO->SetLayer( (SdrLayerID) nLayer );
428 							}
429 						}
430 
431 						bReturn = true;
432 					}
433 				}
434 				else
435 				{
436 					SdrPageView*	pPV = GetSdrPageView();
437 					sal_Bool			bDropOnTabBar = sal_True;
438 
439 					if( !pPage && pPV->GetPage()->GetPageNum() != mnDragSrcPgNum )
440 					{
441 						pPage = (SdPage*) pPV->GetPage();
442 						bDropOnTabBar = sal_False;
443 					}
444 
445 					if( pPage )
446 					{
447 						// drop on other page
448 						String aActiveLayer( GetActiveLayer() );
449 
450 						if( !pPV->IsLayerLocked( aActiveLayer ) )
451 						{
452 							if( !IsPresObjSelected() )
453 							{
454 								SdrMarkList* pMarkList;
455 
456 								if( (mnDragSrcPgNum != SDRPAGE_NOTFOUND) && (mnDragSrcPgNum != pPV->GetPage()->GetPageNum()) )
457 								{
458 									pMarkList = mpDragSrcMarkList;
459 								}
460 								else
461 								{
462 									// actual mark list is used
463 									pMarkList = new SdrMarkList( GetMarkedObjectList());
464 								}
465 
466 								pMarkList->ForceSort();
467 
468 								// #83525# stuff to remember originals and clones
469 								Container	aConnectorContainer(0);
470 								sal_uInt32	a, nConnectorCount(0L);
471 								Point		aCurPos;
472 
473 								// calculate real position of current
474 								// source objects, if necessary (#103207)
475 								if( pOwnData == SD_MOD()->pTransferSelection )
476 								{
477 									Rectangle aCurBoundRect;
478 
479 									if( pMarkList->TakeBoundRect( pPV, aCurBoundRect ) )
480 										aCurPos = aCurBoundRect.TopLeft();
481 									else
482 										aCurPos = pOwnData->GetStartPos();
483 								}
484 								else
485 									aCurPos = pOwnData->GetStartPos();
486 
487 								const Size aVector( maDropPos.X() - aCurPos.X(), maDropPos.Y() - aCurPos.Y() );
488 
489 								for(a = 0; a < pMarkList->GetMarkCount(); a++)
490 								{
491 									SdrMark* pM = pMarkList->GetMark(a);
492 									SdrObject* pObj = pM->GetMarkedSdrObj()->Clone();
493 
494 									if(pObj)
495 									{
496 										if(!bDropOnTabBar)
497 										{
498 											// #83525# do a NbcMove(...) instead of setting SnapRects here
499 											pObj->NbcMove(aVector);
500 										}
501 
502 										pPage->InsertObject(pObj);
503 
504 										if( IsUndoEnabled() )
505 										{
506 											BegUndo(String(SdResId(STR_UNDO_DRAGDROP)));
507 											AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoNewObject(*pObj));
508 											EndUndo();
509 										}
510 
511 										// #83525#
512 										ImpRememberOrigAndClone* pRem = new ImpRememberOrigAndClone;
513 										pRem->pOrig = pM->GetMarkedSdrObj();
514 										pRem->pClone = pObj;
515 										aConnectorContainer.Insert(pRem, CONTAINER_APPEND);
516 
517 										if(pObj->ISA(SdrEdgeObj))
518 											nConnectorCount++;
519 									}
520 								}
521 
522 								// #83525# try to re-establish connections at clones
523 								if(nConnectorCount)
524 								{
525 									for(a = 0; a < aConnectorContainer.Count(); a++)
526 									{
527 										ImpRememberOrigAndClone* pRem = (ImpRememberOrigAndClone*)aConnectorContainer.GetObject(a);
528 
529 										if(pRem->pClone->ISA(SdrEdgeObj))
530 										{
531 											SdrEdgeObj* pOrigEdge = (SdrEdgeObj*)pRem->pOrig;
532 											SdrEdgeObj* pCloneEdge = (SdrEdgeObj*)pRem->pClone;
533 
534 											// test first connection
535 											SdrObjConnection& rConn0 = pOrigEdge->GetConnection(sal_False);
536 											SdrObject* pConnObj = rConn0.GetObject();
537 											if(pConnObj)
538 											{
539 												SdrObject* pConnClone = ImpGetClone(aConnectorContainer, pConnObj);
540 												if(pConnClone)
541 												{
542 													// if dest obj was cloned, too, re-establish connection
543 													pCloneEdge->ConnectToNode(sal_False, pConnClone);
544 													pCloneEdge->GetConnection(sal_False).SetConnectorId(rConn0.GetConnectorId());
545 												}
546 												else
547 												{
548 													// set position of connection point of original connected object
549 													const SdrGluePointList* pGlueList = pConnObj->GetGluePointList();
550 													if(pGlueList)
551 													{
552 														sal_uInt16 nInd = pGlueList->FindGluePoint(rConn0.GetConnectorId());
553 
554 														if(SDRGLUEPOINT_NOTFOUND != nInd)
555 														{
556 															const SdrGluePoint& rGluePoint = (*pGlueList)[nInd];
557 															Point aPosition = rGluePoint.GetAbsolutePos(*pConnObj);
558 															aPosition.X() += aVector.A();
559 															aPosition.Y() += aVector.B();
560 															pCloneEdge->SetTailPoint(sal_False, aPosition);
561 														}
562 													}
563 												}
564 											}
565 
566 											// test second connection
567 											SdrObjConnection& rConn1 = pOrigEdge->GetConnection(sal_True);
568 											pConnObj = rConn1.GetObject();
569 											if(pConnObj)
570 											{
571 												SdrObject* pConnClone = ImpGetClone(aConnectorContainer, pConnObj);
572 												if(pConnClone)
573 												{
574 													// if dest obj was cloned, too, re-establish connection
575 													pCloneEdge->ConnectToNode(sal_True, pConnClone);
576 													pCloneEdge->GetConnection(sal_True).SetConnectorId(rConn1.GetConnectorId());
577 												}
578 												else
579 												{
580 													// set position of connection point of original connected object
581 													const SdrGluePointList* pGlueList = pConnObj->GetGluePointList();
582 													if(pGlueList)
583 													{
584 														sal_uInt16 nInd = pGlueList->FindGluePoint(rConn1.GetConnectorId());
585 
586 														if(SDRGLUEPOINT_NOTFOUND != nInd)
587 														{
588 															const SdrGluePoint& rGluePoint = (*pGlueList)[nInd];
589 															Point aPosition = rGluePoint.GetAbsolutePos(*pConnObj);
590 															aPosition.X() += aVector.A();
591 															aPosition.Y() += aVector.B();
592 															pCloneEdge->SetTailPoint(sal_True, aPosition);
593 														}
594 													}
595 												}
596 											}
597 										}
598 									}
599 								}
600 
601 								// #83525# cleanup remember classes
602 								for(a = 0; a < aConnectorContainer.Count(); a++)
603 									delete (ImpRememberOrigAndClone*)aConnectorContainer.GetObject(a);
604 
605 								if( pMarkList != mpDragSrcMarkList )
606 									delete pMarkList;
607 
608 								bReturn = true;
609 							}
610 							else
611 							{
612 								maDropErrorTimer.Start();
613 								bReturn = false;
614 							}
615 						}
616 					}
617 					else
618 					{
619 						pOwnData->SetInternalMove( sal_True );
620 						MoveAllMarked( Size( maDropPos.X() - pOwnData->GetStartPos().X(),
621 											 maDropPos.Y() - pOwnData->GetStartPos().Y() ), bCopy );
622 						bReturn = true;
623 					}
624 				}
625 			}
626 			else
627 			{
628 				// different views
629 				if( !pSourceView->IsPresObjSelected() )
630 				{
631 					// model is owned by from AllocModel() created DocShell
632 					SdDrawDocument* pSourceDoc = (SdDrawDocument*) pSourceView->GetModel();
633 					pSourceDoc->CreatingDataObj( pOwnData );
634 					SdDrawDocument* pModel = (SdDrawDocument*) pSourceView->GetAllMarkedModel();
635 					bReturn = Paste( *pModel, maDropPos, pPage, nPasteOptions );
636 
637 					if( !pPage )
638 						pPage = (SdPage*) GetSdrPageView()->GetPage();
639 
640 					String aLayout( pPage->GetLayoutName() );
641 					aLayout.Erase( aLayout.SearchAscii( SD_LT_SEPARATOR ) );
642 					pPage->SetPresentationLayout( aLayout, sal_False, sal_False );
643 					pSourceDoc->CreatingDataObj( NULL );
644 				}
645 				else
646 				{
647 					maDropErrorTimer.Start();
648 					bReturn = false;
649 				}
650 			}
651 		}
652 		else
653 		{
654 		    SdDrawDocument*	pWorkModel = (SdDrawDocument*) pOwnData->GetWorkDocument();
655 		    SdPage*			pWorkPage = (SdPage*) pWorkModel->GetSdPage( 0, PK_STANDARD );
656 
657 		    pWorkPage->SetRectsDirty();
658 
659             // #120393# Clipboard data uses full object geometry range
660 		    const Size aSize( pWorkPage->GetAllObjBoundRect().GetSize() );
661 
662 		    maDropPos.X() = pOwnData->GetStartPos().X() + ( aSize.Width() >> 1 );
663 		    maDropPos.Y() = pOwnData->GetStartPos().Y() + ( aSize.Height() >> 1 );
664 
665 		    // delete pages, that are not of any interest for us
666 		    for( long i = ( pWorkModel->GetPageCount() - 1 ); i >= 0; i-- )
667 		    {
668 			    SdPage* pP = static_cast< SdPage* >( pWorkModel->GetPage( (sal_uInt16) i ) );
669 
670 			    if( pP->GetPageKind() != PK_STANDARD )
671 				    pWorkModel->DeletePage( (sal_uInt16) i );
672 		    }
673 
674 		    bReturn = Paste( *pWorkModel, maDropPos, pPage, nPasteOptions );
675 
676 		    if( !pPage )
677 			    pPage = (SdPage*) GetSdrPageView()->GetPage();
678 
679 		    String aLayout(pPage->GetLayoutName());
680 		    aLayout.Erase(aLayout.SearchAscii(SD_LT_SEPARATOR));
681 		    pPage->SetPresentationLayout( aLayout, sal_False, sal_False );
682 	   }
683 	}
684 
685     if(!bReturn && CHECK_FORMAT_TRANS( SOT_FORMATSTR_ID_DRAWING ))
686 	{
687 		SotStorageStreamRef xStm;
688 
689 		if( aDataHelper.GetSotStorageStream( SOT_FORMATSTR_ID_DRAWING, xStm ) )
690 		{
691 			sal_Bool bChanged = sal_False;
692 
693             DrawDocShellRef xShell = new DrawDocShell(SFX_CREATE_MODE_INTERNAL);
694             xShell->DoInitNew(0);
695 
696 			SdDrawDocument* pModel = xShell->GetDoc();
697             pModel->InsertPage(pModel->AllocPage(false));
698 
699             Reference< XComponent > xComponent( xShell->GetModel(), UNO_QUERY );
700 			xStm->Seek( 0 );
701 
702 			com::sun::star::uno::Reference< com::sun::star::io::XInputStream > xInputStream( new utl::OInputStreamWrapper( *xStm ) );
703 			bReturn = SvxDrawingLayerImport( pModel, xInputStream, xComponent, "com.sun.star.comp.Impress.XMLOasisImporter" );
704 
705 			if( pModel->GetPageCount() == 0 )
706 			{
707 				DBG_ERROR("empty or invalid drawing xml document on clipboard!" );
708 			}
709 			else
710 			{
711 				if( bReturn )
712 				{
713 					if( pModel->GetSdPage( 0, PK_STANDARD )->GetObjCount() == 1 )
714 					{
715 						// only one object
716 						SdrObject*		pObj = pModel->GetSdPage( 0, PK_STANDARD )->GetObj( 0 );
717 						SdrObject*		pPickObj2 = NULL;
718 						SdrPageView*	pPV = NULL;
719 						PickObj( rPos, getHitTolLog(), pPickObj2, pPV );
720 
721 						if( ( mnAction & DND_ACTION_MOVE ) && pPickObj2 && pObj )
722 						{
723 							// replace object
724 							SdrObject*	pNewObj = pObj->Clone();
725 							Rectangle	aPickObjRect( pPickObj2->GetCurrentBoundRect() );
726 							Size		aPickObjSize( aPickObjRect.GetSize() );
727 							Point		aVec( aPickObjRect.TopLeft() );
728 							Rectangle	aObjRect( pNewObj->GetCurrentBoundRect() );
729 							Size		aObjSize( aObjRect.GetSize() );
730 
731 							Fraction aScaleWidth( aPickObjSize.Width(), aObjSize.Width() );
732 							Fraction aScaleHeight( aPickObjSize.Height(), aObjSize.Height() );
733 							pNewObj->NbcResize( aObjRect.TopLeft(), aScaleWidth, aScaleHeight );
734 
735 							aVec -= aObjRect.TopLeft();
736 							pNewObj->NbcMove( Size( aVec.X(), aVec.Y() ) );
737 
738 							const bool bUndo = IsUndoEnabled();
739 
740 							if( bUndo )
741 								BegUndo( String( SdResId(STR_UNDO_DRAGDROP ) ) );
742 							pNewObj->NbcSetLayer( pPickObj->GetLayer() );
743 							SdrPage* pWorkPage = GetSdrPageView()->GetPage();
744 							pWorkPage->InsertObject( pNewObj );
745 							if( bUndo )
746 							{
747 								AddUndo( mpDoc->GetSdrUndoFactory().CreateUndoNewObject( *pNewObj ) );
748 								AddUndo( mpDoc->GetSdrUndoFactory().CreateUndoDeleteObject( *pPickObj2 ) );
749 							}
750 							pWorkPage->RemoveObject( pPickObj2->GetOrdNum() );
751 
752 							if( bUndo )
753 							{
754 								EndUndo();
755 							}
756 							else
757 							{
758 								SdrObject::Free(pPickObj2 );
759 							}
760 							bChanged = sal_True;
761 							mnAction = DND_ACTION_COPY;
762 						}
763 						else if( ( mnAction & DND_ACTION_LINK ) && pPickObj && pObj && !pPickObj->ISA( SdrGrafObj ) && !pPickObj->ISA( SdrOle2Obj ) )
764 						{
765 							SfxItemSet aSet( mpDoc->GetPool() );
766 
767 							// set new attributes to object
768 							const bool bUndo = IsUndoEnabled();
769 							if( bUndo )
770 							{
771 								BegUndo( String( SdResId( STR_UNDO_DRAGDROP ) ) );
772 								AddUndo( mpDoc->GetSdrUndoFactory().CreateUndoAttrObject( *pPickObj ) );
773 							}
774 
775 							aSet.Put( pObj->GetMergedItemSet() );
776 
777 							// Eckenradius soll nicht uebernommen werden.
778 							// In der Gallery stehen Farbverlauefe (Rechtecke)
779 							// welche den Eckenradius == 0 haben. Dieser soll
780 							// nicht auf das Objekt uebertragen werden.
781 							aSet.ClearItem( SDRATTR_ECKENRADIUS );
782 
783                             const SdrGrafObj* pSdrGrafObj = dynamic_cast< const SdrGrafObj* >(pObj);
784 
785                             if(pSdrGrafObj)
786                             {
787                                 // If we have a graphic as source object, use it's graphic
788                                 // content as fill style
789                                 aSet.Put(XFillStyleItem(XFILL_BITMAP));
790                                 aSet.Put(XFillBitmapItem(&mpDoc->GetPool(), pSdrGrafObj->GetGraphic()));
791                             }
792 
793                             pPickObj->SetMergedItemSetAndBroadcast( aSet );
794 
795 							if( pPickObj->ISA( E3dObject ) && pObj->ISA( E3dObject ) )
796 							{
797 								// Zusaetzlich 3D Attribute handeln
798 								SfxItemSet aNewSet( mpDoc->GetPool(), SID_ATTR_3D_START, SID_ATTR_3D_END, 0 );
799 								SfxItemSet aOldSet( mpDoc->GetPool(), SID_ATTR_3D_START, SID_ATTR_3D_END, 0 );
800 
801 								aOldSet.Put(pPickObj->GetMergedItemSet());
802 								aNewSet.Put( pObj->GetMergedItemSet() );
803 
804 								if( bUndo )
805 									AddUndo( new E3dAttributesUndoAction( *mpDoc, this, (E3dObject*) pPickObj, aNewSet, aOldSet, sal_False ) );
806 								pPickObj->SetMergedItemSetAndBroadcast( aNewSet );
807 							}
808 
809 							if( bUndo )
810 								EndUndo();
811 							bChanged = sal_True;
812 						}
813 					}
814 				}
815 
816 				if( !bChanged )
817 				{
818 					SdrPage* pWorkPage = pModel->GetSdPage( 0, PK_STANDARD );
819 
820 					pWorkPage->SetRectsDirty();
821 
822 					if( pOwnData )
823 					{
824                         // #120393# Clipboard data uses full object geometry range
825 						const Size aSize( pWorkPage->GetAllObjBoundRect().GetSize() );
826 
827 						maDropPos.X() = pOwnData->GetStartPos().X() + ( aSize.Width() >> 1 );
828 						maDropPos.Y() = pOwnData->GetStartPos().Y() + ( aSize.Height() >> 1 );
829 					}
830 
831 					bReturn = Paste( *pModel, maDropPos, pPage, nPasteOptions );
832 				}
833 
834                 xShell->DoClose();
835 			}
836 		}
837 	}
838 
839     if(!bReturn && CHECK_FORMAT_TRANS(SOT_FORMATSTR_ID_SBA_FIELDDATAEXCHANGE))
840 	{
841 		::rtl::OUString aOUString;
842 
843 		if( aDataHelper.GetString( SOT_FORMATSTR_ID_SBA_FIELDDATAEXCHANGE, aOUString ) )
844 		{
845 			SdrObject* pObj = CreateFieldControl( aOUString );
846 
847 			if( pObj )
848 			{
849 				Rectangle	aRect( pObj->GetLogicRect() );
850 				Size		aSize( aRect.GetSize() );
851 
852 				maDropPos.X() -= ( aSize.Width() >> 1 );
853 				maDropPos.Y() -= ( aSize.Height() >> 1 );
854 
855 				aRect.SetPos( maDropPos );
856 				pObj->SetLogicRect( aRect );
857 				InsertObjectAtView( pObj, *GetSdrPageView(), SDRINSERT_SETDEFLAYER );
858 				bReturn = true;
859 			}
860 		}
861 	}
862 
863     if(!bReturn &&
864         !bLink &&
865         (CHECK_FORMAT_TRANS(SOT_FORMATSTR_ID_EMBED_SOURCE) || CHECK_FORMAT_TRANS(SOT_FORMATSTR_ID_EMBEDDED_OBJ))  &&
866         aDataHelper.HasFormat(SOT_FORMATSTR_ID_OBJECTDESCRIPTOR))
867 	{
868         //TODO/LATER: is it possible that this format is binary?! (from old versions of SO)
869         uno::Reference < io::XInputStream > xStm;
870 		TransferableObjectDescriptor	aObjDesc;
871 
872 		if( aDataHelper.GetTransferableObjectDescriptor( SOT_FORMATSTR_ID_OBJECTDESCRIPTOR, aObjDesc ) &&
873             ( aDataHelper.GetInputStream( nFormat ? nFormat : SOT_FORMATSTR_ID_EMBED_SOURCE, xStm ) ||
874               aDataHelper.GetInputStream( SOT_FORMATSTR_ID_EMBEDDED_OBJ, xStm ) ) )
875 		{
876 			if( mpDoc->GetDocSh() && ( mpDoc->GetDocSh()->GetClassName() == aObjDesc.maClassName ) )
877 			{
878                 uno::Reference < embed::XStorage > xStore( ::comphelper::OStorageHelper::GetStorageFromInputStream( xStm ) );
879 				::sd::DrawDocShellRef xDocShRef( new ::sd::DrawDocShell( SFX_CREATE_MODE_EMBEDDED, sal_True, mpDoc->GetDocumentType() ) );
880 
881                 // mba: BaseURL doesn't make sense for clipboard functionality
882                 SfxMedium *pMedium = new SfxMedium( xStore, String() );
883                 if( xDocShRef->DoLoad( pMedium ) )
884                 {
885 					SdDrawDocument*	pModel = (SdDrawDocument*) xDocShRef->GetDoc();
886 					SdPage*			pWorkPage = (SdPage*) pModel->GetSdPage( 0, PK_STANDARD );
887 
888 					pWorkPage->SetRectsDirty();
889 
890 					if( pOwnData )
891 					{
892                         // #120393# Clipboard data uses full object geometry range
893 						const Size aSize( pWorkPage->GetAllObjBoundRect().GetSize() );
894 
895 						maDropPos.X() = pOwnData->GetStartPos().X() + ( aSize.Width() >> 1 );
896 						maDropPos.Y() = pOwnData->GetStartPos().Y() + ( aSize.Height() >> 1 );
897 					}
898 
899 					// delete pages, that are not of any interest for us
900 					for( long i = ( pModel->GetPageCount() - 1 ); i >= 0; i-- )
901 					{
902 						SdPage* pP = static_cast< SdPage* >( pModel->GetPage( (sal_uInt16) i ) );
903 
904 						if( pP->GetPageKind() != PK_STANDARD )
905 							pModel->DeletePage( (sal_uInt16) i );
906 					}
907 
908 					bReturn = Paste( *pModel, maDropPos, pPage, nPasteOptions );
909 
910 					if( !pPage )
911 						pPage = (SdPage*) GetSdrPageView()->GetPage();
912 
913 					String aLayout(pPage->GetLayoutName());
914 					aLayout.Erase(aLayout.SearchAscii(SD_LT_SEPARATOR));
915 					pPage->SetPresentationLayout( aLayout, sal_False, sal_False );
916 				}
917 
918 				xDocShRef->DoClose();
919 				xDocShRef.Clear();
920 
921 			}
922 			else
923 			{
924                 ::rtl::OUString aName;
925                 uno::Reference < embed::XEmbeddedObject > xObj = mpDocSh->GetEmbeddedObjectContainer().InsertEmbeddedObject( xStm, aName );
926                 if ( xObj.is() )
927                 {
928 					svt::EmbeddedObjectRef aObjRef( xObj, aObjDesc.mnViewAspect );
929 
930 					// try to get the replacement image from the clipboard
931 					Graphic aGraphic;
932 					sal_uLong nGrFormat = 0;
933 
934 // (wg. Selection Manager bei Trustet Solaris)
935 #ifndef SOLARIS
936 /*
937                     if( aDataHelper.GetGraphic( SOT_FORMATSTR_ID_SVXB, aGraphic ) )
938 						nGrFormat = SOT_FORMATSTR_ID_SVXB;
939 					else if( aDataHelper.GetGraphic( FORMAT_GDIMETAFILE, aGraphic ) )
940 						nGrFormat = SOT_FORMAT_GDIMETAFILE;
941 					else if( aDataHelper.GetGraphic( FORMAT_BITMAP, aGraphic ) )
942 						nGrFormat = SOT_FORMAT_BITMAP;
943 */
944 #endif
945 
946 					// insert replacement image ( if there is one ) into the object helper
947 					if ( nGrFormat )
948 					{
949 						datatransfer::DataFlavor aDataFlavor;
950 						SotExchange::GetFormatDataFlavor( nGrFormat, aDataFlavor );
951 						aObjRef.SetGraphic( aGraphic, aDataFlavor.MimeType );
952 					}
953 
954 					Size aSize;
955 					if ( aObjDesc.mnViewAspect == embed::Aspects::MSOLE_ICON )
956 					{
957                     	if( aObjDesc.maSize.Width() && aObjDesc.maSize.Height() )
958 							aSize = aObjDesc.maSize;
959 						else
960 						{
961 							MapMode aMapMode( MAP_100TH_MM );
962 							aSize = aObjRef.GetSize( &aMapMode );
963 						}
964 					}
965 					else
966 					{
967                     	awt::Size aSz;
968                     	MapUnit aMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( xObj->getMapUnit( aObjDesc.mnViewAspect ) );
969                     	if( aObjDesc.maSize.Width() && aObjDesc.maSize.Height() )
970                     	{
971                         	Size aTmp( OutputDevice::LogicToLogic( aObjDesc.maSize, MAP_100TH_MM, aMapUnit ) );
972                         	aSz.Width = aTmp.Width();
973                         	aSz.Height = aTmp.Height();
974                         	xObj->setVisualAreaSize( aObjDesc.mnViewAspect, aSz );
975                     	}
976 
977 						try
978 						{
979                     		aSz = xObj->getVisualAreaSize( aObjDesc.mnViewAspect );
980 						}
981 						catch( embed::NoVisualAreaSizeException& )
982 						{
983 							// if the size still was not set the default size will be set later
984 						}
985 
986                     	aSize = Size( aSz.Width, aSz.Height );
987 
988                     	if( !aSize.Width() || !aSize.Height() )
989                     	{
990                         	aSize.Width()  = 14100;
991                         	aSize.Height() = 10000;
992                         	aSize = OutputDevice::LogicToLogic( Size(14100, 10000), MAP_100TH_MM, aMapUnit );
993                         	aSz.Width = aSize.Width();
994                         	aSz.Height = aSize.Height();
995                         	xObj->setVisualAreaSize( aObjDesc.mnViewAspect, aSz );
996                     	}
997 
998                     	aSize = OutputDevice::LogicToLogic( aSize, aMapUnit, MAP_100TH_MM );
999 					}
1000 
1001                     Size aMaxSize( mpDoc->GetMaxObjSize() );
1002 
1003                     maDropPos.X() -= Min( aSize.Width(), aMaxSize.Width() ) >> 1;
1004                     maDropPos.Y() -= Min( aSize.Height(), aMaxSize.Height() ) >> 1;
1005 
1006                     Rectangle       aRect( maDropPos, aSize );
1007                     SdrOle2Obj*     pObj = new SdrOle2Obj( aObjRef, aName, aRect );
1008                     SdrPageView*    pPV = GetSdrPageView();
1009                     sal_uLong           nOptions = SDRINSERT_SETDEFLAYER;
1010 
1011                     if (mpViewSh!=NULL)
1012                     {
1013                         OSL_ASSERT (mpViewSh->GetViewShell()!=NULL);
1014                         SfxInPlaceClient* pIpClient
1015                             = mpViewSh->GetViewShell()->GetIPClient();
1016                         if (pIpClient!=NULL && pIpClient->IsObjectInPlaceActive())
1017                             nOptions |= SDRINSERT_DONTMARK;
1018                     }
1019 
1020                     InsertObjectAtView( pObj, *pPV, nOptions );
1021 
1022                     if( pImageMap )
1023                         pObj->InsertUserData( new SdIMapInfo( *pImageMap ) );
1024 
1025                     if ( pObj && pObj->IsChart() )
1026                     {
1027                         bool bDisableDataTableDialog = false;
1028                         svt::EmbeddedObjectRef::TryRunningState( xObj );
1029                         uno::Reference< beans::XPropertySet > xProps( xObj->getComponent(), uno::UNO_QUERY );
1030                         if ( xProps.is() &&
1031                              ( xProps->getPropertyValue( ::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "DisableDataTableDialog" ) ) ) >>= bDisableDataTableDialog ) &&
1032                              bDisableDataTableDialog )
1033                         {
1034                             xProps->setPropertyValue( ::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "DisableDataTableDialog" ) ),
1035                                 uno::makeAny( sal_False ) );
1036                             xProps->setPropertyValue( ::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "DisableComplexChartTypes" ) ),
1037                                 uno::makeAny( sal_False ) );
1038                             uno::Reference< util::XModifiable > xModifiable( xProps, uno::UNO_QUERY );
1039                             if ( xModifiable.is() )
1040                             {
1041                                 xModifiable->setModified( sal_True );
1042                             }
1043                         }
1044                     }
1045 
1046                     bReturn = true;
1047                 }
1048 			}
1049 		}
1050 	}
1051 
1052     if(!bReturn &&
1053         !bLink &&
1054         (CHECK_FORMAT_TRANS(SOT_FORMATSTR_ID_EMBEDDED_OBJ_OLE) || CHECK_FORMAT_TRANS(SOT_FORMATSTR_ID_EMBED_SOURCE_OLE)) &&
1055         aDataHelper.HasFormat(SOT_FORMATSTR_ID_OBJECTDESCRIPTOR_OLE))
1056 	{
1057 		// online insert ole if format is forced or no gdi metafile is available
1058 		if( (nFormat != 0) || !aDataHelper.HasFormat( FORMAT_GDIMETAFILE ) )
1059 		{
1060 			uno::Reference < io::XInputStream > xStm;
1061 			TransferableObjectDescriptor	aObjDesc;
1062 
1063 			if ( aDataHelper.GetTransferableObjectDescriptor( SOT_FORMATSTR_ID_OBJECTDESCRIPTOR_OLE, aObjDesc ) )
1064 			{
1065 				uno::Reference < embed::XEmbeddedObject > xObj;
1066 				::rtl::OUString aName;
1067 
1068 				if ( aDataHelper.GetInputStream( nFormat ? nFormat : SOT_FORMATSTR_ID_EMBED_SOURCE_OLE, xStm ) ||
1069 					aDataHelper.GetInputStream( SOT_FORMATSTR_ID_EMBEDDED_OBJ_OLE, xStm ) )
1070 				{
1071             		xObj = mpDocSh->GetEmbeddedObjectContainer().InsertEmbeddedObject( xStm, aName );
1072 				}
1073 				else
1074 				{
1075 					try
1076 					{
1077 						uno::Reference< embed::XStorage > xTmpStor = ::comphelper::OStorageHelper::GetTemporaryStorage();
1078 						uno::Reference < embed::XEmbedObjectClipboardCreator > xClipboardCreator(
1079 							::comphelper::getProcessServiceFactory()->createInstance(
1080                            		::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM("com.sun.star.embed.MSOLEObjectSystemCreator")) ),
1081 							uno::UNO_QUERY_THROW );
1082 
1083 						embed::InsertedObjectInfo aInfo = xClipboardCreator->createInstanceInitFromClipboard(
1084 																xTmpStor,
1085 																::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM ( "DummyName" ) ),
1086 																uno::Sequence< beans::PropertyValue >() );
1087 
1088 						// TODO/LATER: in future InsertedObjectInfo will be used to get container related information
1089 						// for example whether the object should be an iconified one
1090 						xObj = aInfo.Object;
1091 						if ( xObj.is() )
1092 							mpDocSh->GetEmbeddedObjectContainer().InsertEmbeddedObject( xObj, aName );
1093 					}
1094 					catch( uno::Exception& )
1095 					{}
1096 				}
1097 
1098 				if ( xObj.is() )
1099 				{
1100 					svt::EmbeddedObjectRef aObjRef( xObj, aObjDesc.mnViewAspect );
1101 
1102 					// try to get the replacement image from the clipboard
1103 					Graphic aGraphic;
1104 					sal_uLong nGrFormat = 0;
1105 
1106 // (wg. Selection Manager bei Trustet Solaris)
1107 #ifndef SOLARIS
1108                     if( aDataHelper.GetGraphic( SOT_FORMATSTR_ID_SVXB, aGraphic ) )
1109 						nGrFormat = SOT_FORMATSTR_ID_SVXB;
1110 					else if( aDataHelper.GetGraphic( FORMAT_GDIMETAFILE, aGraphic ) )
1111 						nGrFormat = SOT_FORMAT_GDIMETAFILE;
1112 					else if( aDataHelper.GetGraphic( FORMAT_BITMAP, aGraphic ) )
1113 						nGrFormat = SOT_FORMAT_BITMAP;
1114 #endif
1115 
1116 					// insert replacement image ( if there is one ) into the object helper
1117 					if ( nGrFormat )
1118 					{
1119 						datatransfer::DataFlavor aDataFlavor;
1120 						SotExchange::GetFormatDataFlavor( nGrFormat, aDataFlavor );
1121 						aObjRef.SetGraphic( aGraphic, aDataFlavor.MimeType );
1122 					}
1123 
1124 					Size aSize;
1125 					if ( aObjDesc.mnViewAspect == embed::Aspects::MSOLE_ICON )
1126 					{
1127                     	if( aObjDesc.maSize.Width() && aObjDesc.maSize.Height() )
1128 							aSize = aObjDesc.maSize;
1129 						else
1130 						{
1131 							MapMode aMapMode( MAP_100TH_MM );
1132 							aSize = aObjRef.GetSize( &aMapMode );
1133 						}
1134 					}
1135 					else
1136 					{
1137             			MapUnit aMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( xObj->getMapUnit( aObjDesc.mnViewAspect ) );
1138 
1139             			awt::Size aSz;
1140 						try{
1141 							aSz = xObj->getVisualAreaSize( aObjDesc.mnViewAspect );
1142 						}
1143 						catch( embed::NoVisualAreaSizeException& )
1144 						{
1145 							// the default size will be set later
1146 						}
1147 
1148             			if( aObjDesc.maSize.Width() && aObjDesc.maSize.Height() )
1149             			{
1150                 			Size aTmp( OutputDevice::LogicToLogic( aObjDesc.maSize, MAP_100TH_MM, aMapUnit ) );
1151 							if ( aSz.Width != aTmp.Width() || aSz.Height != aTmp.Height() )
1152 							{
1153                 				aSz.Width = aTmp.Width();
1154                 				aSz.Height = aTmp.Height();
1155                 				xObj->setVisualAreaSize( aObjDesc.mnViewAspect, aSz );
1156 							}
1157             			}
1158 
1159             			aSize = Size( aSz.Width, aSz.Height );
1160 
1161             			if( !aSize.Width() || !aSize.Height() )
1162             			{
1163                 			aSize = OutputDevice::LogicToLogic( Size(14100, 10000), MAP_100TH_MM, aMapUnit );
1164                 			aSz.Width = aSize.Width();
1165                 			aSz.Height = aSize.Height();
1166                 			xObj->setVisualAreaSize( aObjDesc.mnViewAspect, aSz );
1167             			}
1168 
1169             			aSize = OutputDevice::LogicToLogic( aSize, aMapUnit, MAP_100TH_MM );
1170 					}
1171 
1172             		Size aMaxSize( mpDoc->GetMaxObjSize() );
1173 
1174             		maDropPos.X() -= Min( aSize.Width(), aMaxSize.Width() ) >> 1;
1175             		maDropPos.Y() -= Min( aSize.Height(), aMaxSize.Height() ) >> 1;
1176 
1177             		Rectangle       aRect( maDropPos, aSize );
1178             		SdrOle2Obj*     pObj = new SdrOle2Obj( aObjRef, aName, aRect );
1179             		SdrPageView*    pPV = GetSdrPageView();
1180             		sal_uLong           nOptions = SDRINSERT_SETDEFLAYER;
1181 
1182             		if (mpViewSh!=NULL)
1183             		{
1184                 		OSL_ASSERT (mpViewSh->GetViewShell()!=NULL);
1185                 		SfxInPlaceClient* pIpClient
1186                     		= mpViewSh->GetViewShell()->GetIPClient();
1187                 		if (pIpClient!=NULL && pIpClient->IsObjectInPlaceActive())
1188                     		nOptions |= SDRINSERT_DONTMARK;
1189             		}
1190 
1191             		InsertObjectAtView( pObj, *pPV, nOptions );
1192 
1193             		if( pImageMap )
1194                 		pObj->InsertUserData( new SdIMapInfo( *pImageMap ) );
1195 
1196 					// let the object stay in loaded state after insertion
1197 					pObj->Unload();
1198             		bReturn = true;
1199 				}
1200 			}
1201 		}
1202 
1203 		if( !bReturn && aDataHelper.HasFormat( FORMAT_GDIMETAFILE ) )
1204 		{
1205 			// if no object was inserted, insert a picture
1206 			InsertMetaFile( aDataHelper, rPos, pImageMap, true );
1207             bReturn = true;
1208 		}
1209 	}
1210 
1211     if(!bReturn && (!bLink || pPickObj) && CHECK_FORMAT_TRANS(SOT_FORMATSTR_ID_SVXB))
1212 	{
1213 		SotStorageStreamRef xStm;
1214 
1215 		if( aDataHelper.GetSotStorageStream( SOT_FORMATSTR_ID_SVXB, xStm ) )
1216 		{
1217 			Point   aInsertPos( rPos );
1218 			Graphic aGraphic;
1219 
1220 			*xStm >> aGraphic;
1221 
1222 			if( pOwnData && pOwnData->GetWorkDocument() )
1223 			{
1224 		        const SdDrawDocument*	pWorkModel = pOwnData->GetWorkDocument();
1225                 SdrPage*	            pWorkPage = (SdrPage*) ( ( pWorkModel->GetPageCount() > 1 ) ?
1226                                                     pWorkModel->GetSdPage( 0, PK_STANDARD ) :
1227                                                     pWorkModel->GetPage( 0 ) );
1228 
1229 				pWorkPage->SetRectsDirty();
1230 
1231                 // #120393# Clipboard data uses full object geometry range
1232 				const Size aSize( pWorkPage->GetAllObjBoundRect().GetSize() );
1233 
1234 				aInsertPos.X() = pOwnData->GetStartPos().X() + ( aSize.Width() >> 1 );
1235 				aInsertPos.Y() = pOwnData->GetStartPos().Y() + ( aSize.Height() >> 1 );
1236 			}
1237 
1238 			// #90129# restrict movement to WorkArea
1239 			Size aImageMapSize = OutputDevice::LogicToLogic(aGraphic.GetPrefSize(),
1240 				aGraphic.GetPrefMapMode(), MapMode(MAP_100TH_MM));
1241 
1242 			ImpCheckInsertPos(aInsertPos, aImageMapSize, GetWorkArea());
1243 
1244 			InsertGraphic( aGraphic, mnAction, aInsertPos, NULL, pImageMap );
1245 			bReturn = true;
1246 		}
1247 	}
1248 
1249     if(!bReturn && (!bLink || pPickObj) && CHECK_FORMAT_TRANS(FORMAT_GDIMETAFILE))
1250 	{
1251 		Point aInsertPos( rPos );
1252 
1253 		if( pOwnData && pOwnData->GetWorkDocument() )
1254 
1255 		{
1256 			const SdDrawDocument*	pWorkModel = pOwnData->GetWorkDocument();
1257             SdrPage*	            pWorkPage = (SdrPage*) ( ( pWorkModel->GetPageCount() > 1 ) ?
1258                                                 pWorkModel->GetSdPage( 0, PK_STANDARD ) :
1259                                                 pWorkModel->GetPage( 0 ) );
1260 
1261 			pWorkPage->SetRectsDirty();
1262 
1263             // #120393# Clipboard data uses full object geometry range
1264 			const Size aSize( pWorkPage->GetAllObjBoundRect().GetSize() );
1265 
1266 			aInsertPos.X() = pOwnData->GetStartPos().X() + ( aSize.Width() >> 1 );
1267 			aInsertPos.Y() = pOwnData->GetStartPos().Y() + ( aSize.Height() >> 1 );
1268 		}
1269 
1270 		bReturn = InsertMetaFile( aDataHelper, aInsertPos, pImageMap, nFormat == 0 ? true : false ) ? sal_True : sal_False;
1271 	}
1272 
1273     if(!bReturn && (!bLink || pPickObj) && CHECK_FORMAT_TRANS(FORMAT_BITMAP))
1274 	{
1275         BitmapEx aBmpEx;
1276 
1277         // get basic Bitmap data
1278         aDataHelper.GetBitmapEx(FORMAT_BITMAP, aBmpEx);
1279 
1280         if(aBmpEx.IsEmpty())
1281         {
1282             // if this did not work, try to get graphic formats and convert these to bitmap
1283             Graphic aGraphic;
1284 
1285             if(aDataHelper.GetGraphic(FORMAT_GDIMETAFILE, aGraphic))
1286             {
1287                 aBmpEx = aGraphic.GetBitmapEx();
1288             }
1289             else if(aDataHelper.GetGraphic(SOT_FORMATSTR_ID_SVXB, aGraphic))
1290             {
1291                 aBmpEx = aGraphic.GetBitmapEx();
1292             }
1293             else if(aDataHelper.GetGraphic(FORMAT_BITMAP, aGraphic))
1294             {
1295                 aBmpEx = aGraphic.GetBitmapEx();
1296             }
1297         }
1298 
1299         if(!aBmpEx.IsEmpty())
1300 		{
1301 			Point aInsertPos( rPos );
1302 
1303 			if( pOwnData && pOwnData->GetWorkDocument() )
1304 			{
1305 			    const SdDrawDocument*	pWorkModel = pOwnData->GetWorkDocument();
1306                 SdrPage*	            pWorkPage = (SdrPage*) ( ( pWorkModel->GetPageCount() > 1 ) ?
1307                                                     pWorkModel->GetSdPage( 0, PK_STANDARD ) :
1308                                                     pWorkModel->GetPage( 0 ) );
1309 
1310 				pWorkPage->SetRectsDirty();
1311 
1312                 // #120393# Clipboard data uses full object geometry range
1313 				const Size aSize( pWorkPage->GetAllObjBoundRect().GetSize() );
1314 
1315 				aInsertPos.X() = pOwnData->GetStartPos().X() + ( aSize.Width() >> 1 );
1316 				aInsertPos.Y() = pOwnData->GetStartPos().Y() + ( aSize.Height() >> 1 );
1317 			}
1318 
1319 			// #90129# restrict movement to WorkArea
1320 			Size aImageMapSize(aBmpEx.GetPrefSize());
1321 			ImpCheckInsertPos(aInsertPos, aImageMapSize, GetWorkArea());
1322 
1323 			InsertGraphic( aBmpEx, mnAction, aInsertPos, NULL, pImageMap );
1324 			bReturn = true;
1325 		}
1326     }
1327 
1328     if(!bReturn && pPickObj && CHECK_FORMAT_TRANS( SOT_FORMATSTR_ID_XFA ) )
1329 	{
1330 		SotStorageStreamRef xStm;
1331 
1332 		if( aDataHelper.GetSotStorageStream( SOT_FORMATSTR_ID_XFA, xStm ) )
1333 		{
1334 			XFillExchangeData aFillData( XFillAttrSetItem( &mpDoc->GetPool() ) );
1335 
1336 			*xStm >> aFillData;
1337 
1338 			if( IsUndoEnabled() )
1339 			{
1340 				BegUndo( String( SdResId( STR_UNDO_DRAGDROP ) ) );
1341 				AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoAttrObject( *pPickObj ) );
1342 				EndUndo();
1343 			}
1344 
1345 			XFillAttrSetItem*	pSetItem = aFillData.GetXFillAttrSetItem();
1346 			SfxItemSet			rSet = pSetItem->GetItemSet();
1347 			XFillStyle			eFill= ( (XFillStyleItem&) rSet.Get( XATTR_FILLSTYLE ) ).GetValue();
1348 
1349 			if( eFill == XFILL_SOLID || eFill == XFILL_NONE )
1350 			{
1351 				const XFillColorItem&	rColItem = (XFillColorItem&) rSet.Get( XATTR_FILLCOLOR );
1352 				Color					aColor( rColItem.GetColorValue() );
1353 				String					aName( rColItem.GetName() );
1354 				SfxItemSet				aSet( mpDoc->GetPool() );
1355 				sal_Bool					bClosed = pPickObj->IsClosedObj();
1356 				::sd::Window* pWin = mpViewSh->GetActiveWindow();
1357 				sal_uInt16 nHitLog = (sal_uInt16) pWin->PixelToLogic(
1358                     Size(FuPoor::HITPIX, 0 ) ).Width();
1359 				const long				n2HitLog = nHitLog << 1;
1360 				Point					aHitPosR( rPos );
1361 				Point					aHitPosL( rPos );
1362 				Point					aHitPosT( rPos );
1363 				Point					aHitPosB( rPos );
1364 				const SetOfByte*		pVisiLayer = &GetSdrPageView()->GetVisibleLayers();
1365 
1366 				aHitPosR.X() += n2HitLog;
1367 				aHitPosL.X() -= n2HitLog;
1368 				aHitPosT.Y() += n2HitLog;
1369 				aHitPosB.Y() -= n2HitLog;
1370 
1371 				if( bClosed &&
1372 					SdrObjectPrimitiveHit(*pPickObj, aHitPosR, nHitLog, *GetSdrPageView(), pVisiLayer, false) &&
1373 					SdrObjectPrimitiveHit(*pPickObj, aHitPosL, nHitLog, *GetSdrPageView(), pVisiLayer, false) &&
1374 					SdrObjectPrimitiveHit(*pPickObj, aHitPosT, nHitLog, *GetSdrPageView(), pVisiLayer, false) &&
1375 					SdrObjectPrimitiveHit(*pPickObj, aHitPosB, nHitLog, *GetSdrPageView(), pVisiLayer, false) )
1376 				{
1377 					// area fill
1378 					if(eFill == XFILL_SOLID )
1379 						aSet.Put(XFillColorItem(aName, aColor));
1380 
1381 					aSet.Put( XFillStyleItem( eFill ) );
1382 				}
1383 				else
1384 					aSet.Put( XLineColorItem( aName, aColor ) );
1385 
1386 				// Textfarbe hinzufuegen
1387 				pPickObj->SetMergedItemSetAndBroadcast( aSet );
1388 			}
1389 		}
1390 	}
1391 
1392     if(!bReturn && !bLink && CHECK_FORMAT_TRANS(SOT_FORMATSTR_ID_HTML))
1393 	{
1394 		SotStorageStreamRef xStm;
1395 
1396 		if( aDataHelper.GetSotStorageStream( SOT_FORMATSTR_ID_HTML, xStm ) )
1397 		{
1398 			xStm->Seek( 0 );
1399             // mba: clipboard always must contain absolute URLs (could be from alien source)
1400             bReturn = SdrView::Paste( *xStm, String(), EE_FORMAT_HTML, maDropPos, pPage, nPasteOptions );
1401 		}
1402 	}
1403 
1404     if(!bReturn && !bLink && CHECK_FORMAT_TRANS(SOT_FORMATSTR_ID_EDITENGINE))
1405 	{
1406 		SotStorageStreamRef xStm;
1407 
1408 		if( aDataHelper.GetSotStorageStream( SOT_FORMATSTR_ID_EDITENGINE, xStm ) )
1409 		{
1410 			OutlinerView* pOLV = GetTextEditOutlinerView();
1411 
1412             xStm->Seek( 0 );
1413 
1414 			if( pOLV )
1415 			{
1416 				Rectangle   aRect( pOLV->GetOutputArea() );
1417    				Point       aPos( pOLV->GetWindow()->PixelToLogic( maDropPos ) );
1418 
1419 				if( aRect.IsInside( aPos ) || ( !bDrag && IsTextEdit() ) )
1420 				{
1421                     // mba: clipboard always must contain absolute URLs (could be from alien source)
1422                     pOLV->Read( *xStm, String(), EE_FORMAT_BIN, sal_False, mpDocSh->GetHeaderAttributes() );
1423 					bReturn = true;
1424 				}
1425 			}
1426 
1427 			if( !bReturn )
1428                 // mba: clipboard always must contain absolute URLs (could be from alien source)
1429                 bReturn = SdrView::Paste( *xStm, String(), EE_FORMAT_BIN, maDropPos, pPage, nPasteOptions );
1430 		}
1431 	}
1432 
1433     if(!bReturn && !bLink && CHECK_FORMAT_TRANS(FORMAT_RTF))
1434 	{
1435 		SotStorageStreamRef xStm;
1436 
1437 		if( aDataHelper.GetSotStorageStream( FORMAT_RTF, xStm ) )
1438 		{
1439             xStm->Seek( 0 );
1440 
1441 			if( bTable )
1442 			{
1443 				bReturn = PasteRTFTable( xStm, pPage, nPasteOptions );
1444 			}
1445 			else
1446 			{
1447 				OutlinerView* pOLV = GetTextEditOutlinerView();
1448 
1449 				if( pOLV )
1450 				{
1451 					Rectangle   aRect( pOLV->GetOutputArea() );
1452    					Point       aPos( pOLV->GetWindow()->PixelToLogic( maDropPos ) );
1453 
1454 					if( aRect.IsInside( aPos ) || ( !bDrag && IsTextEdit() ) )
1455 					{
1456 						// mba: clipboard always must contain absolute URLs (could be from alien source)
1457 						pOLV->Read( *xStm, String(), EE_FORMAT_RTF, sal_False, mpDocSh->GetHeaderAttributes() );
1458 						bReturn = true;
1459 					}
1460 				}
1461 
1462 				if( !bReturn )
1463 					// mba: clipboard always must contain absolute URLs (could be from alien source)
1464 					bReturn = SdrView::Paste( *xStm, String(), EE_FORMAT_RTF, maDropPos, pPage, nPasteOptions );
1465 			}
1466 		}
1467 	}
1468 
1469     if(!bReturn && CHECK_FORMAT_TRANS(FORMAT_FILE_LIST))
1470 	{
1471         FileList aDropFileList;
1472 
1473         if( aDataHelper.GetFileList( FORMAT_FILE_LIST, aDropFileList ) )
1474         {
1475             maDropFileVector.clear();
1476 
1477             for( sal_uLong i = 0, nCount = aDropFileList.Count(); i < nCount; i++ )
1478                 maDropFileVector.push_back( aDropFileList.GetFile( i ) );
1479 
1480             maDropInsertFileTimer.Start();
1481         }
1482 
1483 		bReturn = true;
1484 	}
1485 
1486     if(!bReturn && CHECK_FORMAT_TRANS(FORMAT_FILE))
1487 	{
1488         String aDropFile;
1489 
1490         if( aDataHelper.GetString( FORMAT_FILE, aDropFile ) )
1491         {
1492             maDropFileVector.clear();
1493             maDropFileVector.push_back( aDropFile );
1494 			maDropInsertFileTimer.Start();
1495         }
1496 
1497 		bReturn = true;
1498 	}
1499 
1500     if(!bReturn && !bLink && CHECK_FORMAT_TRANS(FORMAT_STRING))
1501 	{
1502 		if( ( FORMAT_STRING == nFormat ) ||
1503             ( !aDataHelper.HasFormat( SOT_FORMATSTR_ID_SOLK ) &&
1504 			  !aDataHelper.HasFormat( SOT_FORMATSTR_ID_NETSCAPE_BOOKMARK ) &&
1505 			  !aDataHelper.HasFormat( SOT_FORMATSTR_ID_FILENAME ) ) )
1506 		{
1507 			::rtl::OUString aOUString;
1508 
1509 			if( aDataHelper.GetString( FORMAT_STRING, aOUString ) )
1510 			{
1511 				OutlinerView* pOLV = GetTextEditOutlinerView();
1512 
1513 				if( pOLV )
1514 				{
1515 					pOLV->InsertText( aOUString );
1516 					bReturn = true;
1517 				}
1518 
1519                 if( !bReturn )
1520                     bReturn = SdrView::Paste( aOUString, maDropPos, pPage, nPasteOptions );
1521 			}
1522 		}
1523 	}
1524 
1525 	MarkListHasChanged();
1526 	mbIsDropAllowed = sal_True;
1527 	rDnDAction = mnAction;
1528 	delete pImageMap;
1529 
1530 	return bReturn;
1531 }
1532 
1533 extern void CreateTableFromRTF( SvStream& rStream, SdDrawDocument* pModel  );
1534 
PasteRTFTable(SotStorageStreamRef xStm,SdrPage * pPage,sal_uLong nPasteOptions)1535 bool View::PasteRTFTable( SotStorageStreamRef xStm, SdrPage* pPage, sal_uLong nPasteOptions )
1536 {
1537 	SdDrawDocument* pModel = new SdDrawDocument( DOCUMENT_TYPE_IMPRESS, mpDocSh );
1538 	pModel->NewOrLoadCompleted(NEW_DOC);
1539 	pModel->GetItemPool().SetDefaultMetric(SFX_MAPUNIT_100TH_MM);
1540 	pModel->InsertPage(pModel->AllocPage(false));
1541 
1542 	Reference< XComponent > xComponent( new SdXImpressDocument( pModel, sal_True ) );
1543 	pModel->setUnoModel( Reference< XInterface >::query( xComponent ) );
1544 
1545 	CreateTableFromRTF( *xStm, pModel );
1546 	bool bRet = Paste( *pModel, maDropPos, pPage, nPasteOptions );
1547 
1548 	xComponent->dispose();
1549 	xComponent.clear();
1550 
1551 	delete pModel;
1552 
1553 	return bRet;
1554 }
1555 
1556 } // end of namespace sd
1557