xref: /aoo41x/main/automation/source/inc/rcontrol.hxx (revision fb99aade)

/**************************************************************
 *
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 *
 *************************************************************/



/*************************************************************************
 *
 *	  ATTENTION
 *	  This file is intended to work inside and outside the StarOffice environment.
 *	  Only adaption of file commtypes.hxx should be necessary. Else it is a bug!
 *
 ************************************************************************/

#ifndef _RCONTROL_HXX
#define _RCONTROL_HXX


#define UID_ACTIVE			"UID_ACTIVE"


#define SI_IPCCommandBlock	1
#define SI_SocketCommandBlock	SI_IPCCommandBlock	// Zumindest erstmal
#define SI_DirectCommandBlock	2
#define SIControl			3   // remove after numeric HelpIDs are completely removed and no legacy testtool is used anymore
#define SISlot				4
#define SIFlow				5
#define SICommand			6
#define SIUnoSlot			7
#define SIStringControl		8

#define SIReturnBlock		11
#define SIReturn			12
#define SIReturnError		13

// Typisierung im Stream
#define BinUSHORT			11
#define BinULONG			14
#define BinString			12
#define BinBool				13
#define BinSbxValue			15


// Classes
// !!!Diese Defines duerfen niemals geaendert werden!!!
#define C_NoType			-1
// Maximale 32 einfache Controls
#define C_TabControl        0
#define C_RadioButton       1
#define C_CheckBox          2
#define C_TriStateBox       3
#define C_Edit              4
#define C_MultiLineEdit     5
#define C_MultiListBox      6
#define C_ListBox           7
#define C_ComboBox          8
#define C_PushButton        9

#define C_SpinField         10
#define C_PatternField		11
#define C_NumericField		12
#define C_MetricField		13
#define C_CurrencyField		14
#define C_DateField			15
#define C_TimeField			16

#define C_ImageRadioButton	17
#define C_NumericBox		18
#define C_MetricBox			19
#define C_CurrencyBox		20
#define C_DateBox			21
#define C_TimeBox			22

#define C_ImageButton		23
#define C_MenuButton		24
#define C_MoreButton		25

// Maximale 7 Container
#define	C_TabPage			32
#define C_ModalDlg          33
#define	C_FloatWin			34
#define C_ModelessDlg		35
#define	C_WorkWin			36
#define C_DockingWin        37

// Diese Defines koennen geaendert werden
#define C_MessBox			40
#define C_InfoBox			41
#define C_WarningBox		42
#define C_ErrorBox			43
#define C_QueryBox			44

#define	C_TabDlg			45
#define	C_SingleTabDlg		46

#define C_Window			47


#define C_PatternBox		60
#define C_ToolBox			61
#define C_ValueSet			62
#define C_Control			63
#define C_TreeListBox       64  // Hurray the TreeListBox finally got its own Window Type

#define C_OkButton			65
#define C_CancelButton		66
#define C_ButtonDialog		67

#define C_Dialog			68




#define M_WITH_RETURN		0x0200	// Die Variable wird zum Aufnehmen des Wertes gespeichert
#define M_KEY_STRING		0x0400	// Key Befehle werden umgewandelt i.e. "<return><up>"
#define M_SOFFICE           0x0800  // Command valid for Star/Open Office
#define M_MOZILLA           0x1000  // Command valid for Mozilla
// for MacroRecorder
#define M_RET_NUM_CONTROL   0x2000  // decode ULong as Control (For Tabpages, Toolboxes, ... )

// Methoden
#define M_Select            21
#define M_SetNoSelection    22
#define M_SetText           23
#define M_More              24
#define M_Less              25
#define M_ToMin             26
#define M_ToMax             27
#define M_Check             28
#define M_UnCheck           29
#define M_TriState          30
#define M_SetPage           31
#define M_Click             32

#define M_Close	            33		// Push Buttons on Dialog (Auch More Button)
#define M_Cancel            34
#define M_OK                35
#define M_Help              36
#define M_Default           37		// Push defaultbutton on Dialog

#define M_Yes				38
#define M_No				39
#define M_Repeat			40

#define M_Open				41
#define M_Pick				42
#define M_Move				43
#define M_Size				44
#define M_Minimize			45
#define M_Maximize			46
#define M_Dock				47
#define M_Undock			48



#define M_TypeKeys			( M_KEY_STRING | 50 )
#define M_MouseDown			51
#define M_MouseUp			52
#define M_MouseMove			53
#define M_MouseDoubleClick	54
#define M_SnapShot			55
#define M_SetNextToolBox	56
#define M_OpenContextMenu	57
#define M_MultiSelect		58

// Filedialog
#define M_SetPath			60
#define M_SetCurFilter 		61

// Printdialog
#define M_SetPrinter		70
#define M_CheckRange		71
#define M_SetRangeText		72
#define M_SetFirstPage		73
#define M_SetLastPage		74
#define M_CheckCollate		75
#define M_SetPageId			76
#define M_SetPageNr			77

#define M_AnimateMouse		78
#define M_TearOff			79

#define M_FadeIn			80
#define M_FadeOut			81
#define M_Pin				82

#define M_UseMenu           83      // Use the menu of the next possible parent of given Window

#define M_OpenMenu          84      // MenuButtons and Menus in ToolBoxes

#define M_Restore           85      // Window Control together with M_Maximize and M_Minimize

#define M_DisplayPercent	200		// Zum Anzeigen der Prozente des Windows

#define M_LAST_NO_RETURN	200

#if ( M_LAST_NO_RETURN >= M_WITH_RETURN )
#error "Bereich �berschritten"
#endif

#define M_Exists			( M_WITH_RETURN |  1 )
#define M_NotExists			( M_WITH_RETURN |  2 )
#define M_IsEnabled			( M_WITH_RETURN |  3 )
#define M_IsVisible			( M_WITH_RETURN |  4 )
#define M_IsWritable		( M_WITH_RETURN |  5 )

#define M_GetPage			( M_WITH_RETURN |  6 )
#define M_IsChecked			( M_WITH_RETURN |  7 )
#define M_IsTristate		( M_WITH_RETURN |  8 )
#define M_GetState			( M_WITH_RETURN |  9 )
#define M_GetText			( M_WITH_RETURN | 10 )
#define M_GetSelCount		( M_WITH_RETURN | 11 )
#define M_GetSelIndex		( M_WITH_RETURN | 12 )
#define M_GetSelText		( M_WITH_RETURN | 13 )
#define M_GetItemCount		( M_WITH_RETURN | 14 )
#define M_GetItemText		( M_WITH_RETURN | 15 )
#define M_IsOpen			( M_WITH_RETURN | 16 )
#define M_Caption			( M_WITH_RETURN | 17 )
#define M_IsMax				( M_WITH_RETURN | 18 )
#define M_IsDocked			( M_WITH_RETURN | 19 )
#define M_GetRT				( M_WITH_RETURN | 20 )
#define M_GetPageId			( M_WITH_RETURN | 21 )
#define M_GetPageCount		( M_WITH_RETURN | 22 )
#define M_GetPosX			( M_WITH_RETURN | 23 )
#define M_GetPosY			( M_WITH_RETURN | 24 )
#define M_GetSizeX			( M_WITH_RETURN | 25 )
#define M_GetSizeY			( M_WITH_RETURN | 26 )
#define M_GetNextToolBox	( M_WITH_RETURN | 27 )
#define M_GetButtonCount	( M_WITH_RETURN | 28 )
#define M_GetButtonId		( M_WITH_RETURN | 29 )

#define M_IsFadeIn			( M_WITH_RETURN | 30 )
#define M_IsPin				( M_WITH_RETURN | 31 )

// Statusbar
#define M_StatusGetText		( M_WITH_RETURN | 32 )
#define M_StatusIsProgress	( M_WITH_RETURN | 33 )
#define M_StatusGetItemCount ( M_WITH_RETURN | 34 )
#define M_StatusGetItemId	( M_WITH_RETURN | 35 )

//
#define M_GetMouseStyle		( M_WITH_RETURN | 36 )

// support for Messagebox with checkbox
#define M_GetCheckBoxText	( M_WITH_RETURN | 37 )

// Scrollbars
#define M_HasScrollBar		( M_WITH_RETURN | 38 )
#define M_IsScrollBarEnabled ( M_WITH_RETURN | 39 )

// Dieser befehl wird nur intern im Controller (sts library) verwendet. Sie tauchen nicht im Testtool auf!
#define _M_IsEnabled		( M_WITH_RETURN | 50 )


#define M_GetFixedTextCount	( M_WITH_RETURN | 51 )
#define M_GetFixedText		( M_WITH_RETURN | 52 )


#define M_IsMin				( M_WITH_RETURN | 53 )
#define M_IsRestore         ( M_WITH_RETURN | 54 )

#define M_GetItemType       ( M_WITH_RETURN | 55 )

// Commands for (Edit)BrowseBox
#define M_GetColumnCount    ( M_WITH_RETURN | 56 )
#define M_GetRowCount       ( M_WITH_RETURN | 57 )
#define M_IsEditing         ( M_WITH_RETURN | 58 )

#define M_IsItemEnabled     ( M_WITH_RETURN | 59 )

//#define M_SOFFICE           0x0800  // Command valid for Star/Open Office
//#define M_MOZILLA           0x1000  // Command valid for Mozilla

// Enhencement
#define M_GetHelpText  ( M_WITH_RETURN |  90 )
#define M_GetQuickHelpText  ( M_WITH_RETURN |  91 )
#define M_GetScreenRectangle ( M_WITH_RETURN |  92 )
#define M_HasFocus ( M_WITH_RETURN |  93 )
#define M_GetItemHelpText ( M_WITH_RETURN |  94 )
#define M_GetItemQuickHelpText ( M_WITH_RETURN |  95 )
#define M_GetItemText2 ( M_WITH_RETURN |  96 )

// RemoteCommands
#define RC_AppAbort			( M_SOFFICE | M_MOZILLA | 1 )
#define RC_SetClipboard		( M_SOFFICE | M_MOZILLA | 2 )
#define RC_NoDebug			( M_SOFFICE | M_MOZILLA | 3 )
#define RC_Debug			( M_SOFFICE | M_MOZILLA | 4 )
#define RC_GPF				( M_SOFFICE | M_MOZILLA | 5 )
#define RC_DisplayHid		( M_SOFFICE | M_MOZILLA | 6 )
#define RC_AppDelay			( M_SOFFICE | M_MOZILLA | 7 )
#define RC_UseBindings		( M_SOFFICE             | 8 )
#define RC_Profile			( M_SOFFICE | M_MOZILLA | 9 )
// (Popup)Menu
#define RC_MenuSelect		( M_SOFFICE | M_MOZILLA | 10 )
#define RC_SetControlType	( M_SOFFICE             | 11 )    // deprecated since RTTI
// RemoteFileAccess
#define RC_Kill				( M_SOFFICE             | 12 )
#define RC_RmDir			( M_SOFFICE             | 13 )
#define RC_MkDir			( M_SOFFICE             | 14 )
#define RC_FileCopy			( M_SOFFICE             | 15 )
#define RC_Name				( M_SOFFICE             | 16 )

#define RC_CaptureAssertions (M_SOFFICE | M_MOZILLA | 17 )
#define RC_Assert			( M_SOFFICE | M_MOZILLA | 18 )

#define RC_MenuOpen			( M_SOFFICE | M_MOZILLA | 19 )

#define RC_TypeKeysDelay	( M_SOFFICE | M_MOZILLA | 20 )

#define RC_ShowBar       	(             M_MOZILLA | 21 )

#define RC_LoadURL          (             M_MOZILLA | 22 )

#define RC_CloseSysDialog	( M_SOFFICE             | 23 )

#define RC_SAXRelease		( M_SOFFICE             | 24 )

#define RC_RecordMacro      ( M_SOFFICE             | 25 )

#define RC_ActivateDocument ( M_SOFFICE             | 26 )

#define RC_CatchGPF         ( M_SOFFICE             | 27 )

#define _RC_LAST_NO_RETURN	                          27

#if ( _RC_LAST_NO_RETURN >= M_WITH_RETURN )
#error "Bereich �berschritten"
#endif

// Befehle mit Returnwert
#define RC_GetClipboard		( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 1 )
#define RC_WinTree			( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 2 )
#define RC_ResetApplication	( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 3 )
#define RC_GetNextCloseWindow ( M_SOFFICE             | M_WITH_RETURN | 4 )
#define RC_ApplicationBusy	( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 5 )
// (Popup)Menu
#define RC_MenuGetItemCount	( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 6 )
#define RC_MenuGetItemId	( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 7 )
#define RC_MenuGetItemPos	( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 8 )
#define RC_MenuIsSeperator	( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 9 )
#define RC_MenuIsItemChecked ( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 10 )
#define RC_MenuIsItemEnabled ( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 11 )
#define RC_MenuGetItemText	( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 12 )
// RemoteFileAccess
#define RC_Dir				( M_SOFFICE             | M_WITH_RETURN | 18 )
#define RC_FileLen			( M_SOFFICE             | M_WITH_RETURN | 19 )
#define RC_FileDateTime		( M_SOFFICE             | M_WITH_RETURN | 20 )

#define RC_Translate		( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 21 )
#define RC_GetMouseStyle	( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 22 )
#define RC_UnpackStorage	( M_SOFFICE             | M_WITH_RETURN | 23 )

#define RC_IsBarVisible 	(             M_MOZILLA | M_WITH_RETURN | 24 )

#define RC_MenuGetItemCommand ( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 25 )

#define RC_ExistsSysDialog  ( M_SOFFICE             | M_WITH_RETURN | 26 )

#define RC_SAXCheckWellformed ( M_SOFFICE             | M_WITH_RETURN | 27 )
#define RC_SAXReadFile		( M_SOFFICE             | M_WITH_RETURN | 28 )

#define RC_SAXGetNodeType   ( M_SOFFICE             | M_WITH_RETURN | 29 )
#define RC_SAXGetElementName ( M_SOFFICE             | M_WITH_RETURN | 30 )
#define RC_SAXGetChars      ( M_SOFFICE             | M_WITH_RETURN | 31 )
#define RC_SAXGetChildCount ( M_SOFFICE             | M_WITH_RETURN | 32 )
#define RC_SAXGetAttributeCount ( M_SOFFICE             | M_WITH_RETURN | 33 )
#define RC_SAXGetAttributeName ( M_SOFFICE             | M_WITH_RETURN | 34 )
#define RC_SAXGetAttributeValue ( M_SOFFICE             | M_WITH_RETURN | 35 )
#define RC_SAXSeekElement   ( M_SOFFICE             | M_WITH_RETURN | 36 )
#define RC_SAXHasElement    ( M_SOFFICE             | M_WITH_RETURN | 37 )
#define RC_SAXGetElementPath ( M_SOFFICE             | M_WITH_RETURN | 38 )

#define RC_GetDocumentCount ( M_SOFFICE             | M_WITH_RETURN | 39 )

#define RC_GetSystemLanguage ( M_SOFFICE             | M_WITH_RETURN | 40 )

#define RC_IsProduct        ( M_SOFFICE             | M_WITH_RETURN | 41 )

#define RC_MenuHasSubMenu   ( M_SOFFICE             | M_WITH_RETURN | 42 )

#define RC_UsePostEvents    ( M_SOFFICE             | M_WITH_RETURN | 43 )

#define RC_WaitSlot         ( M_SOFFICE             | M_WITH_RETURN | 44 )

// Flow Control
#define F_EndCommandBlock	101			// Initiiert R�ckmeldung des Status
#define F_Sequence			102			// �bergibt Sequence Nummer (1. in jedem Stream)

// Return codes
#define RET_Sequence		132			// �bergibt Sequence Nummer (1. in jedem Stream)
#define RET_Value			133			// �bergibt Return-wert
#define RET_WinInfo			134			// Information �ber aktuelles Fenster/Control
#define RET_ProfileInfo		135			// Profile Information
#define RET_DirectLoging	136			// Direktes �bertragen von Informationen in das Log
#define RET_MacroRecorder	137			// MakroRecorder Befehl �bertragen



// Subcodes die in nUId geliefert werden
// f�r F_ProfileInfo
#define S_ProfileReset		201			// nNr1 = Anzahl Borders
	// Achtung!! Diese Defines m�ssen aufeinanderfolgende Nummern haben!!
#define S_ProfileBorder1	202			// nNr1 = Border1 in ms
#define S_ProfileBorder2	203			// nNr1 = Border2 in ms
#define S_ProfileBorder3	204			// nNr1 = Border3 in ms
#define S_ProfileBorder4	205			// nNr1 = Border4 in ms
	// Achtung Ende
#define S_ProfileTime		210			// nNr1 = remote Zeit des Befehls
#define S_ProfileDump		211			// Gibt die daten aus.

// f�r F_DirectLoging
#define S_AssertError		220
#define S_AssertWarning		221
#define S_AssertTrace		222
#define S_QAError			223



// Constants which are available in VCLTestTool scripts

// Different types of controls recognized via RTTI
#define CONST_CTBrowseBox		100
#define CONST_CTValueSet		103
#define CONST_CTORoadmap        104
#define CONST_CTIExtensionListBox 105
#define CONST_CTTableControl    106
#define CONST_CTUnknown			199

// Konstanten f�r das ALignment des gesuchten Splitters
#define CONST_ALIGN_LEFT		120
#define CONST_ALIGN_TOP			121
#define CONST_ALIGN_RIGHT		122
#define CONST_ALIGN_BOTTOM		123

/// What dialog to use in RC_CloseSysDialog or RC_ExistsSysDialog
#define CONST_FilePicker        301
#define CONST_FolderPicker      302

/// NodeTypes of the SAX Parser
#define CONST_NodeTypeCharacter 555
#define CONST_NodeTypeElement   556
#define CONST_NodeTypeComment   557

/// ItemTypes for TreeListBox and maybe others
#define CONST_ItemTypeText          602
#define CONST_ItemTypeBMP           601
#define CONST_ItemTypeCheckbox      600
#define CONST_ItemTypeContextBMP    603
#define CONST_ItemTypeUnknown       604

/// Return values for WaitSlot
#define CONST_WSTimeout             701
#define CONST_WSAborted             702
#define CONST_WSFinished            703

// Beschreibt die Parametertypen als Bitfeld  Reihenfolge immer!
// wie hier Aufgelistet
#define PARAM_NONE              0x0000
#define PARAM_USHORT_1          0x0001
#define PARAM_USHORT_2          0x0002
#define PARAM_USHORT_3          0x0100		// Nicht in der Reihe!!
#define PARAM_USHORT_4          0x0200		// Nicht in der Reihe!!
#define PARAM_ULONG_1           0x0004
#define PARAM_ULONG_2           0x0008
#define PARAM_STR_1             0x0010
#define PARAM_STR_2             0x0020
#define PARAM_BOOL_1            0x0040
#define PARAM_BOOL_2            0x0080
#define PARAM_SBXVALUE_1		0x0400		// hier mit 0x0400 Weiter!!! Siehe Oben!

// Zus�tzliche Beschreibung!! wird auch mit dem Rest verodert
//#define PARAM_STR_RAW           0x8000		// Der Zeichensatz der Strings wird nicht konvertiert(f�r Fareastern)


#define ERR_SEND_TIMEOUT		100
#define ERR_EXEC_TIMEOUT		101
#define ERR_RESTART_FAIL		102
#define ERR_RESTART				103
#define ERR_NO_WIN				104		// Keine *.Win Dateien gefunden
#define ERR_NO_SID				105		// Keine *.Sid Dateien gefunden
#define ERR_NO_FILE				106		// Datei nicht gefunden

#endif