1464702f4SAndrew Rist /************************************************************** 2cdf0e10cSrcweir * 3464702f4SAndrew Rist * Licensed to the Apache Software Foundation (ASF) under one 4464702f4SAndrew Rist * or more contributor license agreements. See the NOTICE file 5464702f4SAndrew Rist * distributed with this work for additional information 6464702f4SAndrew Rist * regarding copyright ownership. The ASF licenses this file 7464702f4SAndrew Rist * to you under the Apache License, Version 2.0 (the 8464702f4SAndrew Rist * "License"); you may not use this file except in compliance 9464702f4SAndrew Rist * with the License. You may obtain a copy of the License at 10464702f4SAndrew Rist * 11464702f4SAndrew Rist * http://www.apache.org/licenses/LICENSE-2.0 12464702f4SAndrew Rist * 13464702f4SAndrew Rist * Unless required by applicable law or agreed to in writing, 14464702f4SAndrew Rist * software distributed under the License is distributed on an 15464702f4SAndrew Rist * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY 16464702f4SAndrew Rist * KIND, either express or implied. See the License for the 17464702f4SAndrew Rist * specific language governing permissions and limitations 18464702f4SAndrew Rist * under the License. 19464702f4SAndrew Rist * 20464702f4SAndrew Rist *************************************************************/ 21464702f4SAndrew Rist 22464702f4SAndrew Rist 23cdf0e10cSrcweir 24cdf0e10cSrcweir // MARKER(update_precomp.py): autogen include statement, do not remove 25cdf0e10cSrcweir #include "precompiled_drawinglayer.hxx" 26cdf0e10cSrcweir 27cdf0e10cSrcweir #include <drawinglayer/processor2d/vclmetafileprocessor2d.hxx> 28cdf0e10cSrcweir #include <tools/gen.hxx> 29cdf0e10cSrcweir #include <vcl/virdev.hxx> 30cdf0e10cSrcweir #include <vcl/gdimtf.hxx> 31cdf0e10cSrcweir #include <vcl/gradient.hxx> 32cdf0e10cSrcweir #include <drawinglayer/primitive2d/drawinglayer_primitivetypes2d.hxx> 33cdf0e10cSrcweir #include <drawinglayer/primitive2d/textprimitive2d.hxx> 34cdf0e10cSrcweir #include <drawinglayer/primitive2d/polypolygonprimitive2d.hxx> 35cdf0e10cSrcweir #include <drawinglayer/primitive2d/polygonprimitive2d.hxx> 36cdf0e10cSrcweir #include <drawinglayer/primitive2d/bitmapprimitive2d.hxx> 37cdf0e10cSrcweir #include <drawinglayer/primitive2d/metafileprimitive2d.hxx> 38cdf0e10cSrcweir #include <drawinglayer/primitive2d/maskprimitive2d.hxx> 39cdf0e10cSrcweir #include <basegfx/polygon/b2dpolygonclipper.hxx> 40cdf0e10cSrcweir #include <basegfx/polygon/b2dpolypolygontools.hxx> 41cdf0e10cSrcweir #include <drawinglayer/primitive2d/modifiedcolorprimitive2d.hxx> 42cdf0e10cSrcweir #include <drawinglayer/primitive2d/unifiedtransparenceprimitive2d.hxx> 43cdf0e10cSrcweir #include <drawinglayer/primitive2d/transparenceprimitive2d.hxx> 44cdf0e10cSrcweir #include <drawinglayer/primitive2d/fillgradientprimitive2d.hxx> 45cdf0e10cSrcweir #include <drawinglayer/processor2d/vclpixelprocessor2d.hxx> 46cdf0e10cSrcweir #include <tools/stream.hxx> 47cdf0e10cSrcweir #include <drawinglayer/primitive2d/transformprimitive2d.hxx> 48cdf0e10cSrcweir #include <drawinglayer/primitive2d/markerarrayprimitive2d.hxx> 49cdf0e10cSrcweir #include <drawinglayer/primitive2d/pointarrayprimitive2d.hxx> 50cdf0e10cSrcweir #include <vcl/graphictools.hxx> 51cdf0e10cSrcweir #include <vcl/metaact.hxx> 52cdf0e10cSrcweir #include <drawinglayer/primitive2d/texthierarchyprimitive2d.hxx> 53cdf0e10cSrcweir #include <drawinglayer/primitive2d/textdecoratedprimitive2d.hxx> 54cdf0e10cSrcweir #include <comphelper/processfactory.hxx> 55cdf0e10cSrcweir #include <rtl/ustring.hxx> 56cdf0e10cSrcweir #include <com/sun/star/i18n/CharacterIteratorMode.hdl> 57cdf0e10cSrcweir #include <com/sun/star/i18n/WordType.hpp> 58cdf0e10cSrcweir #include <drawinglayer/primitive2d/controlprimitive2d.hxx> 59cdf0e10cSrcweir #include <drawinglayer/primitive2d/graphicprimitive2d.hxx> 60cdf0e10cSrcweir #include <basegfx/polygon/b2dpolygontools.hxx> 61cdf0e10cSrcweir #include <drawinglayer/primitive2d/pagepreviewprimitive2d.hxx> 62cdf0e10cSrcweir #include <helperchartrenderer.hxx> 63cdf0e10cSrcweir #include <drawinglayer/primitive2d/epsprimitive2d.hxx> 64cdf0e10cSrcweir #include <basegfx/polygon/b2dlinegeometry.hxx> 65cdf0e10cSrcweir 66cdf0e10cSrcweir ////////////////////////////////////////////////////////////////////////////// 67cdf0e10cSrcweir // for PDFExtOutDevData Graphic support 68cdf0e10cSrcweir 69cdf0e10cSrcweir #include <vcl/graph.hxx> 70cdf0e10cSrcweir #include <vcl/svapp.hxx> 71cdf0e10cSrcweir #include <toolkit/helper/formpdfexport.hxx> 72cdf0e10cSrcweir 73cdf0e10cSrcweir ////////////////////////////////////////////////////////////////////////////// 74cdf0e10cSrcweir // for Control printing 75cdf0e10cSrcweir 76cdf0e10cSrcweir #include <com/sun/star/beans/XPropertySet.hpp> 77cdf0e10cSrcweir 78cdf0e10cSrcweir ////////////////////////////////////////////////////////////////////////////// 79cdf0e10cSrcweir // for current chart PrettyPrinting support 80cdf0e10cSrcweir 81cdf0e10cSrcweir #include <drawinglayer/primitive2d/chartprimitive2d.hxx> 82cdf0e10cSrcweir 83cdf0e10cSrcweir ////////////////////////////////////////////////////////////////////////////// 84cdf0e10cSrcweir // for StructureTagPrimitive support in sd's unomodel.cxx 85cdf0e10cSrcweir 86cdf0e10cSrcweir #include <drawinglayer/primitive2d/structuretagprimitive2d.hxx> 87cdf0e10cSrcweir 88cdf0e10cSrcweir ////////////////////////////////////////////////////////////////////////////// 89cdf0e10cSrcweir 90cdf0e10cSrcweir using namespace com::sun::star; 91cdf0e10cSrcweir 92cdf0e10cSrcweir ////////////////////////////////////////////////////////////////////////////// 93cdf0e10cSrcweir // #112245# definition for maximum allowed point count due to Metafile target. 94cdf0e10cSrcweir // To be on the safe side with the old tools polygon, use slightly less then 95cdf0e10cSrcweir // the theoretical maximum (bad experiences with tools polygon) 96cdf0e10cSrcweir 97cdf0e10cSrcweir #define MAX_POLYGON_POINT_COUNT_METAFILE (0x0000fff0) 98cdf0e10cSrcweir 99cdf0e10cSrcweir ////////////////////////////////////////////////////////////////////////////// 100cdf0e10cSrcweir 101cdf0e10cSrcweir namespace 102cdf0e10cSrcweir { 103cdf0e10cSrcweir // #112245# helper to split line polygon in half 104cdf0e10cSrcweir void splitLinePolygon( 105cdf0e10cSrcweir const basegfx::B2DPolygon& rBasePolygon, 106cdf0e10cSrcweir basegfx::B2DPolygon& o_aLeft, 107cdf0e10cSrcweir basegfx::B2DPolygon& o_aRight) 108cdf0e10cSrcweir { 109cdf0e10cSrcweir const sal_uInt32 nCount(rBasePolygon.count()); 110cdf0e10cSrcweir 111cdf0e10cSrcweir if(nCount) 112cdf0e10cSrcweir { 113cdf0e10cSrcweir const sal_uInt32 nHalfCount((nCount - 1) >> 1); 114cdf0e10cSrcweir 115cdf0e10cSrcweir o_aLeft = basegfx::B2DPolygon(rBasePolygon, 0, nHalfCount + 1); 116cdf0e10cSrcweir o_aLeft.setClosed(false); 117cdf0e10cSrcweir 118cdf0e10cSrcweir o_aRight = basegfx::B2DPolygon(rBasePolygon, nHalfCount, nCount - nHalfCount); 119cdf0e10cSrcweir o_aRight.setClosed(false); 120cdf0e10cSrcweir 121cdf0e10cSrcweir if(rBasePolygon.isClosed()) 122cdf0e10cSrcweir { 123cdf0e10cSrcweir o_aRight.append(rBasePolygon.getB2DPoint(0)); 124cdf0e10cSrcweir 125cdf0e10cSrcweir if(rBasePolygon.areControlPointsUsed()) 126cdf0e10cSrcweir { 127cdf0e10cSrcweir o_aRight.setControlPoints( 128cdf0e10cSrcweir o_aRight.count() - 1, 129cdf0e10cSrcweir rBasePolygon.getPrevControlPoint(0), 130cdf0e10cSrcweir rBasePolygon.getNextControlPoint(0)); 131cdf0e10cSrcweir } 132cdf0e10cSrcweir } 133cdf0e10cSrcweir } 134cdf0e10cSrcweir else 135cdf0e10cSrcweir { 136cdf0e10cSrcweir o_aLeft.clear(); 137cdf0e10cSrcweir o_aRight.clear(); 138cdf0e10cSrcweir } 139cdf0e10cSrcweir } 140cdf0e10cSrcweir 141cdf0e10cSrcweir // #112245# helper to evtl. split filled polygons to maximum metafile point count 142cdf0e10cSrcweir bool fillPolyPolygonNeededToBeSplit(basegfx::B2DPolyPolygon& rPolyPolygon) 143cdf0e10cSrcweir { 144cdf0e10cSrcweir bool bRetval(false); 145cdf0e10cSrcweir const sal_uInt32 nPolyCount(rPolyPolygon.count()); 146cdf0e10cSrcweir 147cdf0e10cSrcweir if(nPolyCount) 148cdf0e10cSrcweir { 149cdf0e10cSrcweir basegfx::B2DPolyPolygon aSplitted; 150cdf0e10cSrcweir 151cdf0e10cSrcweir for(sal_uInt32 a(0); a < nPolyCount; a++) 152cdf0e10cSrcweir { 153cdf0e10cSrcweir const basegfx::B2DPolygon aCandidate(rPolyPolygon.getB2DPolygon(a)); 154cdf0e10cSrcweir const sal_uInt32 nPointCount(aCandidate.count()); 155cdf0e10cSrcweir bool bNeedToSplit(false); 156cdf0e10cSrcweir 157cdf0e10cSrcweir if(aCandidate.areControlPointsUsed()) 158cdf0e10cSrcweir { 159cdf0e10cSrcweir // compare with the maximum for bezier curved polygons 160cdf0e10cSrcweir bNeedToSplit = nPointCount > ((MAX_POLYGON_POINT_COUNT_METAFILE / 3L) - 1L); 161cdf0e10cSrcweir } 162cdf0e10cSrcweir else 163cdf0e10cSrcweir { 164cdf0e10cSrcweir // compare with the maximum for simple point polygons 165cdf0e10cSrcweir bNeedToSplit = nPointCount > (MAX_POLYGON_POINT_COUNT_METAFILE - 1); 166cdf0e10cSrcweir } 167cdf0e10cSrcweir 168cdf0e10cSrcweir if(bNeedToSplit) 169cdf0e10cSrcweir { 170cdf0e10cSrcweir // need to split the partial polygon 171cdf0e10cSrcweir const basegfx::B2DRange aRange(aCandidate.getB2DRange()); 172cdf0e10cSrcweir const basegfx::B2DPoint aCenter(aRange.getCenter()); 173cdf0e10cSrcweir 174cdf0e10cSrcweir if(aRange.getWidth() > aRange.getHeight()) 175cdf0e10cSrcweir { 176cdf0e10cSrcweir // clip in left and right 177cdf0e10cSrcweir const basegfx::B2DPolyPolygon aLeft( 178cdf0e10cSrcweir basegfx::tools::clipPolygonOnParallelAxis( 179cdf0e10cSrcweir aCandidate, 180cdf0e10cSrcweir false, 181cdf0e10cSrcweir true, 182cdf0e10cSrcweir aCenter.getX(), 183cdf0e10cSrcweir false)); 184cdf0e10cSrcweir const basegfx::B2DPolyPolygon aRight( 185cdf0e10cSrcweir basegfx::tools::clipPolygonOnParallelAxis( 186cdf0e10cSrcweir aCandidate, 187cdf0e10cSrcweir false, 188cdf0e10cSrcweir false, 189cdf0e10cSrcweir aCenter.getX(), 190cdf0e10cSrcweir false)); 191cdf0e10cSrcweir 192cdf0e10cSrcweir aSplitted.append(aLeft); 193cdf0e10cSrcweir aSplitted.append(aRight); 194cdf0e10cSrcweir } 195cdf0e10cSrcweir else 196cdf0e10cSrcweir { 197cdf0e10cSrcweir // clip in top and bottom 198cdf0e10cSrcweir const basegfx::B2DPolyPolygon aTop( 199cdf0e10cSrcweir basegfx::tools::clipPolygonOnParallelAxis( 200cdf0e10cSrcweir aCandidate, 201cdf0e10cSrcweir true, 202cdf0e10cSrcweir true, 203cdf0e10cSrcweir aCenter.getY(), 204cdf0e10cSrcweir false)); 205cdf0e10cSrcweir const basegfx::B2DPolyPolygon aBottom( 206cdf0e10cSrcweir basegfx::tools::clipPolygonOnParallelAxis( 207cdf0e10cSrcweir aCandidate, 208cdf0e10cSrcweir true, 209cdf0e10cSrcweir false, 210cdf0e10cSrcweir aCenter.getY(), 211cdf0e10cSrcweir false)); 212cdf0e10cSrcweir 213cdf0e10cSrcweir aSplitted.append(aTop); 214cdf0e10cSrcweir aSplitted.append(aBottom); 215cdf0e10cSrcweir } 216cdf0e10cSrcweir } 217cdf0e10cSrcweir else 218cdf0e10cSrcweir { 219cdf0e10cSrcweir aSplitted.append(aCandidate); 220cdf0e10cSrcweir } 221cdf0e10cSrcweir } 222cdf0e10cSrcweir 223cdf0e10cSrcweir if(aSplitted.count() != nPolyCount) 224cdf0e10cSrcweir { 225cdf0e10cSrcweir rPolyPolygon = aSplitted; 226cdf0e10cSrcweir } 227cdf0e10cSrcweir } 228cdf0e10cSrcweir 229cdf0e10cSrcweir return bRetval; 230cdf0e10cSrcweir } 231cdf0e10cSrcweir } // end of anonymous namespace 232cdf0e10cSrcweir 233cdf0e10cSrcweir ////////////////////////////////////////////////////////////////////////////// 234cdf0e10cSrcweir 235cdf0e10cSrcweir namespace drawinglayer 236cdf0e10cSrcweir { 237cdf0e10cSrcweir namespace processor2d 238cdf0e10cSrcweir { 239cdf0e10cSrcweir Rectangle VclMetafileProcessor2D::impDumpToMetaFile( 240cdf0e10cSrcweir const primitive2d::Primitive2DSequence& rContent, 241cdf0e10cSrcweir GDIMetaFile& o_rContentMetafile) 242cdf0e10cSrcweir { 243cdf0e10cSrcweir // Prepare VDev, MetaFile and connections 244cdf0e10cSrcweir OutputDevice* pLastOutputDevice = mpOutputDevice; 245cdf0e10cSrcweir GDIMetaFile* pLastMetafile = mpMetaFile; 246cdf0e10cSrcweir basegfx::B2DRange aPrimitiveRange(primitive2d::getB2DRangeFromPrimitive2DSequence(rContent, getViewInformation2D())); 247cdf0e10cSrcweir 248cdf0e10cSrcweir // transform primitive range with current transformation (e.g shadow offset) 249cdf0e10cSrcweir aPrimitiveRange.transform(maCurrentTransformation); 250cdf0e10cSrcweir 251cdf0e10cSrcweir const Rectangle aPrimitiveRectangle( 252cdf0e10cSrcweir basegfx::fround(aPrimitiveRange.getMinX()), basegfx::fround(aPrimitiveRange.getMinY()), 253cdf0e10cSrcweir basegfx::fround(aPrimitiveRange.getMaxX()), basegfx::fround(aPrimitiveRange.getMaxY())); 254cdf0e10cSrcweir VirtualDevice aContentVDev; 255cdf0e10cSrcweir MapMode aNewMapMode(pLastOutputDevice->GetMapMode()); 256cdf0e10cSrcweir 257cdf0e10cSrcweir mpOutputDevice = &aContentVDev; 258cdf0e10cSrcweir mpMetaFile = &o_rContentMetafile; 259cdf0e10cSrcweir aContentVDev.EnableOutput(false); 260cdf0e10cSrcweir aContentVDev.SetMapMode(pLastOutputDevice->GetMapMode()); 261cdf0e10cSrcweir o_rContentMetafile.Record(&aContentVDev); 262cdf0e10cSrcweir aContentVDev.SetLineColor(pLastOutputDevice->GetLineColor()); 263cdf0e10cSrcweir aContentVDev.SetFillColor(pLastOutputDevice->GetFillColor()); 264cdf0e10cSrcweir aContentVDev.SetFont(pLastOutputDevice->GetFont()); 265cdf0e10cSrcweir aContentVDev.SetDrawMode(pLastOutputDevice->GetDrawMode()); 266cdf0e10cSrcweir aContentVDev.SetSettings(pLastOutputDevice->GetSettings()); 267cdf0e10cSrcweir aContentVDev.SetRefPoint(pLastOutputDevice->GetRefPoint()); 268cdf0e10cSrcweir 269cdf0e10cSrcweir // dump to MetaFile 270cdf0e10cSrcweir process(rContent); 271cdf0e10cSrcweir 272cdf0e10cSrcweir // cleanups 273cdf0e10cSrcweir o_rContentMetafile.Stop(); 274cdf0e10cSrcweir o_rContentMetafile.WindStart(); 275cdf0e10cSrcweir aNewMapMode.SetOrigin(aPrimitiveRectangle.TopLeft()); 276cdf0e10cSrcweir o_rContentMetafile.SetPrefMapMode(aNewMapMode); 277cdf0e10cSrcweir o_rContentMetafile.SetPrefSize(aPrimitiveRectangle.GetSize()); 278cdf0e10cSrcweir mpOutputDevice = pLastOutputDevice; 279cdf0e10cSrcweir mpMetaFile = pLastMetafile; 280cdf0e10cSrcweir 281cdf0e10cSrcweir return aPrimitiveRectangle; 282cdf0e10cSrcweir } 283cdf0e10cSrcweir 284cdf0e10cSrcweir void VclMetafileProcessor2D::impConvertFillGradientAttributeToVCLGradient( 285cdf0e10cSrcweir Gradient& o_rVCLGradient, 286cdf0e10cSrcweir const attribute::FillGradientAttribute& rFiGrAtt, 287cdf0e10cSrcweir bool bIsTransparenceGradient) 288cdf0e10cSrcweir { 289cdf0e10cSrcweir if(bIsTransparenceGradient) 290cdf0e10cSrcweir { 291cdf0e10cSrcweir // it's about transparence channel intensities (black/white), do not use color modifier 292cdf0e10cSrcweir o_rVCLGradient.SetStartColor(Color(rFiGrAtt.getStartColor())); 293cdf0e10cSrcweir o_rVCLGradient.SetEndColor(Color(rFiGrAtt.getEndColor())); 294cdf0e10cSrcweir } 295cdf0e10cSrcweir else 296cdf0e10cSrcweir { 297cdf0e10cSrcweir // use color modifier to influence start/end color of gradient 298cdf0e10cSrcweir o_rVCLGradient.SetStartColor(Color(maBColorModifierStack.getModifiedColor(rFiGrAtt.getStartColor()))); 299cdf0e10cSrcweir o_rVCLGradient.SetEndColor(Color(maBColorModifierStack.getModifiedColor(rFiGrAtt.getEndColor()))); 300cdf0e10cSrcweir } 301cdf0e10cSrcweir 302cdf0e10cSrcweir o_rVCLGradient.SetAngle(static_cast< sal_uInt16 >(rFiGrAtt.getAngle() * (1.0 / F_PI1800))); 303cdf0e10cSrcweir o_rVCLGradient.SetBorder(static_cast< sal_uInt16 >(rFiGrAtt.getBorder() * 100.0)); 304cdf0e10cSrcweir o_rVCLGradient.SetOfsX(static_cast< sal_uInt16 >(rFiGrAtt.getOffsetX() * 100.0)); 305cdf0e10cSrcweir o_rVCLGradient.SetOfsY(static_cast< sal_uInt16 >(rFiGrAtt.getOffsetY() * 100.0)); 306cdf0e10cSrcweir o_rVCLGradient.SetSteps(rFiGrAtt.getSteps()); 307cdf0e10cSrcweir 308cdf0e10cSrcweir // defaults for intensity; those were computed into the start/end colors already 309cdf0e10cSrcweir o_rVCLGradient.SetStartIntensity(100); 310cdf0e10cSrcweir o_rVCLGradient.SetEndIntensity(100); 311cdf0e10cSrcweir 312cdf0e10cSrcweir switch(rFiGrAtt.getStyle()) 313cdf0e10cSrcweir { 314cdf0e10cSrcweir default : // attribute::GRADIENTSTYLE_LINEAR : 315cdf0e10cSrcweir { 316cdf0e10cSrcweir o_rVCLGradient.SetStyle(GRADIENT_LINEAR); 317cdf0e10cSrcweir break; 318cdf0e10cSrcweir } 319cdf0e10cSrcweir case attribute::GRADIENTSTYLE_AXIAL : 320cdf0e10cSrcweir { 321cdf0e10cSrcweir o_rVCLGradient.SetStyle(GRADIENT_AXIAL); 322cdf0e10cSrcweir break; 323cdf0e10cSrcweir } 324cdf0e10cSrcweir case attribute::GRADIENTSTYLE_RADIAL : 325cdf0e10cSrcweir { 326cdf0e10cSrcweir o_rVCLGradient.SetStyle(GRADIENT_RADIAL); 327cdf0e10cSrcweir break; 328cdf0e10cSrcweir } 329cdf0e10cSrcweir case attribute::GRADIENTSTYLE_ELLIPTICAL : 330cdf0e10cSrcweir { 331cdf0e10cSrcweir o_rVCLGradient.SetStyle(GRADIENT_ELLIPTICAL); 332cdf0e10cSrcweir break; 333cdf0e10cSrcweir } 334cdf0e10cSrcweir case attribute::GRADIENTSTYLE_SQUARE : 335cdf0e10cSrcweir { 336cdf0e10cSrcweir o_rVCLGradient.SetStyle(GRADIENT_SQUARE); 337cdf0e10cSrcweir break; 338cdf0e10cSrcweir } 339cdf0e10cSrcweir case attribute::GRADIENTSTYLE_RECT : 340cdf0e10cSrcweir { 341cdf0e10cSrcweir o_rVCLGradient.SetStyle(GRADIENT_RECT); 342cdf0e10cSrcweir break; 343cdf0e10cSrcweir } 344cdf0e10cSrcweir } 345cdf0e10cSrcweir } 346cdf0e10cSrcweir 347cdf0e10cSrcweir void VclMetafileProcessor2D::impStartSvtGraphicFill(SvtGraphicFill* pSvtGraphicFill) 348cdf0e10cSrcweir { 349cdf0e10cSrcweir if(pSvtGraphicFill && !mnSvtGraphicFillCount) 350cdf0e10cSrcweir { 351cdf0e10cSrcweir SvMemoryStream aMemStm; 352cdf0e10cSrcweir 353cdf0e10cSrcweir aMemStm << *pSvtGraphicFill; 354cdf0e10cSrcweir mpMetaFile->AddAction(new MetaCommentAction("XPATHFILL_SEQ_BEGIN", 0, static_cast< const sal_uInt8* >(aMemStm.GetData()), aMemStm.Seek(STREAM_SEEK_TO_END))); 355cdf0e10cSrcweir mnSvtGraphicFillCount++; 356cdf0e10cSrcweir } 357cdf0e10cSrcweir } 358cdf0e10cSrcweir 359cdf0e10cSrcweir void VclMetafileProcessor2D::impEndSvtGraphicFill(SvtGraphicFill* pSvtGraphicFill) 360cdf0e10cSrcweir { 361cdf0e10cSrcweir if(pSvtGraphicFill && mnSvtGraphicFillCount) 362cdf0e10cSrcweir { 363cdf0e10cSrcweir mnSvtGraphicFillCount--; 364cdf0e10cSrcweir mpMetaFile->AddAction(new MetaCommentAction("XPATHFILL_SEQ_END")); 365cdf0e10cSrcweir delete pSvtGraphicFill; 366cdf0e10cSrcweir } 367cdf0e10cSrcweir } 368cdf0e10cSrcweir 369cdf0e10cSrcweir SvtGraphicStroke* VclMetafileProcessor2D::impTryToCreateSvtGraphicStroke( 370cdf0e10cSrcweir const basegfx::B2DPolygon& rB2DPolygon, 371cdf0e10cSrcweir const basegfx::BColor* pColor, 372cdf0e10cSrcweir const attribute::LineAttribute* pLineAttribute, 373cdf0e10cSrcweir const attribute::StrokeAttribute* pStrokeAttribute, 374cdf0e10cSrcweir const attribute::LineStartEndAttribute* pStart, 375cdf0e10cSrcweir const attribute::LineStartEndAttribute* pEnd) 376cdf0e10cSrcweir { 377cdf0e10cSrcweir SvtGraphicStroke* pRetval = 0; 378cdf0e10cSrcweir 379cdf0e10cSrcweir if(rB2DPolygon.count() && !mnSvtGraphicStrokeCount) 380cdf0e10cSrcweir { 381cdf0e10cSrcweir basegfx::BColor aStrokeColor; 382cdf0e10cSrcweir basegfx::B2DPolyPolygon aStartArrow; 383cdf0e10cSrcweir basegfx::B2DPolyPolygon aEndArrow; 384cdf0e10cSrcweir 385cdf0e10cSrcweir if(pColor) 386cdf0e10cSrcweir { 387cdf0e10cSrcweir aStrokeColor = *pColor; 388cdf0e10cSrcweir } 389cdf0e10cSrcweir else if(pLineAttribute) 390cdf0e10cSrcweir { 391cdf0e10cSrcweir aStrokeColor = maBColorModifierStack.getModifiedColor(pLineAttribute->getColor()); 392cdf0e10cSrcweir } 393cdf0e10cSrcweir 394cdf0e10cSrcweir // It IS needed to record the stroke color at all in the metafile, 395cdf0e10cSrcweir // SvtGraphicStroke has NO entry for stroke color(!) 396cdf0e10cSrcweir mpOutputDevice->SetLineColor(Color(aStrokeColor)); 397cdf0e10cSrcweir 398cdf0e10cSrcweir if(!rB2DPolygon.isClosed()) 399cdf0e10cSrcweir { 400cdf0e10cSrcweir double fPolyLength(0.0); 401cdf0e10cSrcweir 402cdf0e10cSrcweir if(pStart && pStart->isActive()) 403cdf0e10cSrcweir { 404cdf0e10cSrcweir fPolyLength = basegfx::tools::getLength(rB2DPolygon); 405cdf0e10cSrcweir 406cdf0e10cSrcweir aStartArrow = basegfx::tools::createAreaGeometryForLineStartEnd( 407cdf0e10cSrcweir rB2DPolygon, pStart->getB2DPolyPolygon(), true, pStart->getWidth(), 408cdf0e10cSrcweir fPolyLength, pStart->isCentered() ? 0.5 : 0.0, 0); 409cdf0e10cSrcweir } 410cdf0e10cSrcweir 411cdf0e10cSrcweir if(pEnd && pEnd->isActive()) 412cdf0e10cSrcweir { 413cdf0e10cSrcweir if(basegfx::fTools::equalZero(fPolyLength)) 414cdf0e10cSrcweir { 415cdf0e10cSrcweir fPolyLength = basegfx::tools::getLength(rB2DPolygon); 416cdf0e10cSrcweir } 417cdf0e10cSrcweir 418cdf0e10cSrcweir aEndArrow = basegfx::tools::createAreaGeometryForLineStartEnd( 419cdf0e10cSrcweir rB2DPolygon, pEnd->getB2DPolyPolygon(), false, pEnd->getWidth(), 420cdf0e10cSrcweir fPolyLength, pEnd->isCentered() ? 0.5 : 0.0, 0); 421cdf0e10cSrcweir } 422cdf0e10cSrcweir } 423cdf0e10cSrcweir 424cdf0e10cSrcweir SvtGraphicStroke::JoinType eJoin(SvtGraphicStroke::joinNone); 425cdf0e10cSrcweir double fLineWidth(0.0); 426cdf0e10cSrcweir double fMiterLength(0.0); 427cdf0e10cSrcweir SvtGraphicStroke::DashArray aDashArray; 428cdf0e10cSrcweir 429cdf0e10cSrcweir if(pLineAttribute) 430cdf0e10cSrcweir { 431cdf0e10cSrcweir // pre-fill fLineWidth 432cdf0e10cSrcweir fLineWidth = pLineAttribute->getWidth(); 433cdf0e10cSrcweir 434cdf0e10cSrcweir // pre-fill fMiterLength 435cdf0e10cSrcweir fMiterLength = fLineWidth; 436cdf0e10cSrcweir 437cdf0e10cSrcweir // get Join 438cdf0e10cSrcweir switch(pLineAttribute->getLineJoin()) 439cdf0e10cSrcweir { 440cdf0e10cSrcweir default : // basegfx::B2DLINEJOIN_NONE : 441cdf0e10cSrcweir { 442cdf0e10cSrcweir eJoin = SvtGraphicStroke::joinNone; 443cdf0e10cSrcweir break; 444cdf0e10cSrcweir } 445cdf0e10cSrcweir case basegfx::B2DLINEJOIN_BEVEL : 446cdf0e10cSrcweir { 447cdf0e10cSrcweir eJoin = SvtGraphicStroke::joinBevel; 448cdf0e10cSrcweir break; 449cdf0e10cSrcweir } 450cdf0e10cSrcweir case basegfx::B2DLINEJOIN_MIDDLE : 451cdf0e10cSrcweir case basegfx::B2DLINEJOIN_MITER : 452cdf0e10cSrcweir { 453cdf0e10cSrcweir eJoin = SvtGraphicStroke::joinMiter; 454cdf0e10cSrcweir // ATM 15 degrees is assumed 455cdf0e10cSrcweir fMiterLength /= rtl::math::sin(M_PI * (15.0 / 360.0)); 456cdf0e10cSrcweir break; 457cdf0e10cSrcweir } 458cdf0e10cSrcweir case basegfx::B2DLINEJOIN_ROUND : 459cdf0e10cSrcweir { 460cdf0e10cSrcweir eJoin = SvtGraphicStroke::joinRound; 461cdf0e10cSrcweir break; 462cdf0e10cSrcweir } 463cdf0e10cSrcweir } 464cdf0e10cSrcweir } 465cdf0e10cSrcweir 466cdf0e10cSrcweir if(pStrokeAttribute) 467cdf0e10cSrcweir { 468cdf0e10cSrcweir // copy dash array 469cdf0e10cSrcweir aDashArray = pStrokeAttribute->getDotDashArray(); 470cdf0e10cSrcweir } 471cdf0e10cSrcweir 472cdf0e10cSrcweir // #i101734# apply current object transformation to created geometry. 473cdf0e10cSrcweir // This is a partial fix. When a object transformation is used which 474cdf0e10cSrcweir // e.g. contains a scaleX != scaleY, an unproportional scaling would 475cdf0e10cSrcweir // have to be applied to the evtl. existing fat line. The current 476cdf0e10cSrcweir // concept of PDF export and SvtGraphicStroke usage does simply not 477cdf0e10cSrcweir // allow handling such definitions. The only clean way would be to 478cdf0e10cSrcweir // add the transformation to SvtGraphicStroke and to handle it there 479cdf0e10cSrcweir basegfx::B2DPolygon aB2DPolygon(rB2DPolygon); 480cdf0e10cSrcweir 481cdf0e10cSrcweir aB2DPolygon.transform(maCurrentTransformation); 482cdf0e10cSrcweir aStartArrow.transform(maCurrentTransformation); 483cdf0e10cSrcweir aEndArrow.transform(maCurrentTransformation); 484cdf0e10cSrcweir 485cdf0e10cSrcweir pRetval = new SvtGraphicStroke( 486cdf0e10cSrcweir Polygon(aB2DPolygon), 487cdf0e10cSrcweir PolyPolygon(aStartArrow), 488cdf0e10cSrcweir PolyPolygon(aEndArrow), 489cdf0e10cSrcweir mfCurrentUnifiedTransparence, 490cdf0e10cSrcweir fLineWidth, 491cdf0e10cSrcweir SvtGraphicStroke::capButt, 492cdf0e10cSrcweir eJoin, 493cdf0e10cSrcweir fMiterLength, 494cdf0e10cSrcweir aDashArray); 495cdf0e10cSrcweir } 496cdf0e10cSrcweir 497cdf0e10cSrcweir return pRetval; 498cdf0e10cSrcweir } 499cdf0e10cSrcweir 500cdf0e10cSrcweir void VclMetafileProcessor2D::impStartSvtGraphicStroke(SvtGraphicStroke* pSvtGraphicStroke) 501cdf0e10cSrcweir { 502cdf0e10cSrcweir if(pSvtGraphicStroke && !mnSvtGraphicStrokeCount) 503cdf0e10cSrcweir { 504cdf0e10cSrcweir SvMemoryStream aMemStm; 505cdf0e10cSrcweir 506cdf0e10cSrcweir aMemStm << *pSvtGraphicStroke; 507cdf0e10cSrcweir mpMetaFile->AddAction(new MetaCommentAction("XPATHSTROKE_SEQ_BEGIN", 0, static_cast< const sal_uInt8* >(aMemStm.GetData()), aMemStm.Seek(STREAM_SEEK_TO_END))); 508cdf0e10cSrcweir mnSvtGraphicStrokeCount++; 509cdf0e10cSrcweir } 510cdf0e10cSrcweir } 511cdf0e10cSrcweir 512cdf0e10cSrcweir void VclMetafileProcessor2D::impEndSvtGraphicStroke(SvtGraphicStroke* pSvtGraphicStroke) 513cdf0e10cSrcweir { 514cdf0e10cSrcweir if(pSvtGraphicStroke && mnSvtGraphicStrokeCount) 515cdf0e10cSrcweir { 516cdf0e10cSrcweir mnSvtGraphicStrokeCount--; 517cdf0e10cSrcweir mpMetaFile->AddAction(new MetaCommentAction("XPATHSTROKE_SEQ_END")); 518cdf0e10cSrcweir delete pSvtGraphicStroke; 519cdf0e10cSrcweir } 520cdf0e10cSrcweir } 521cdf0e10cSrcweir 522cdf0e10cSrcweir // init static break iterator 523cdf0e10cSrcweir uno::Reference< ::com::sun::star::i18n::XBreakIterator > VclMetafileProcessor2D::mxBreakIterator; 524cdf0e10cSrcweir 525cdf0e10cSrcweir VclMetafileProcessor2D::VclMetafileProcessor2D(const geometry::ViewInformation2D& rViewInformation, OutputDevice& rOutDev) 526cdf0e10cSrcweir : VclProcessor2D(rViewInformation, rOutDev), 527cdf0e10cSrcweir mpMetaFile(rOutDev.GetConnectMetaFile()), 528cdf0e10cSrcweir mnSvtGraphicFillCount(0), 529cdf0e10cSrcweir mnSvtGraphicStrokeCount(0), 530cdf0e10cSrcweir mfCurrentUnifiedTransparence(0.0), 531cdf0e10cSrcweir mpPDFExtOutDevData(dynamic_cast< vcl::PDFExtOutDevData* >(rOutDev.GetExtOutDevData())) 532cdf0e10cSrcweir { 533cdf0e10cSrcweir OSL_ENSURE(rOutDev.GetConnectMetaFile(), "VclMetafileProcessor2D: Used on OutDev which has no MetaFile Target (!)"); 534cdf0e10cSrcweir // draw to logic coordinates, do not initialize maCurrentTransformation to viewTransformation 535cdf0e10cSrcweir // but only to ObjectTransformation. Do not change MapMode of destination. 536cdf0e10cSrcweir maCurrentTransformation = rViewInformation.getObjectTransformation(); 537cdf0e10cSrcweir } 538cdf0e10cSrcweir 539cdf0e10cSrcweir VclMetafileProcessor2D::~VclMetafileProcessor2D() 540cdf0e10cSrcweir { 541cdf0e10cSrcweir // MapMode was not changed, no restore necessary 542cdf0e10cSrcweir } 543cdf0e10cSrcweir 544cdf0e10cSrcweir /*********************************************************************************************** 545cdf0e10cSrcweir 546cdf0e10cSrcweir Support of MetaCommentActions in the VclMetafileProcessor2D 547cdf0e10cSrcweir Found MetaCommentActions and how they are supported: 548cdf0e10cSrcweir 549cdf0e10cSrcweir XGRAD_SEQ_BEGIN, XGRAD_SEQ_END: 550cdf0e10cSrcweir 551cdf0e10cSrcweir Used inside OutputDevice::DrawGradient to mark the start and end of a MetaGradientEx action. 552cdf0e10cSrcweir It is used in various exporters/importers to have direct access to the gradient before it 553cdf0e10cSrcweir is rendered by VCL (and thus fragmented to polygon color actions and others). On that base, e.g. 554cdf0e10cSrcweir the Metafile to SdrObject import creates it's gradient objects. 555cdf0e10cSrcweir Best (and safest) way to support it here is to use PRIMITIVE2D_ID_POLYPOLYGONGRADIENTPRIMITIVE2D, 556cdf0e10cSrcweir map it back to the corresponding tools PolyPolygon and the Gradient and just call 557cdf0e10cSrcweir OutputDevice::DrawGradient which creates the necessary compatible actions. 558cdf0e10cSrcweir 559cdf0e10cSrcweir XPATHFILL_SEQ_BEGIN, XPATHFILL_SEQ_END: 560cdf0e10cSrcweir 561cdf0e10cSrcweir Two producers, one is vcl/source/gdi/gdimtf.cxx, line 1273. There, it is transformed 562cdf0e10cSrcweir inside GDIMetaFile::Rotate, nothing to take care of here. 563cdf0e10cSrcweir The second producer is in graphics/svx/source/svdraw/impgrfll.cxx, line 374. This is used 564cdf0e10cSrcweir with each incarnation of Imp_GraphicFill when a metafile is recorded, fillstyle is not 565cdf0e10cSrcweir XFILL_NONE and not completely transparent. It creates a SvtGraphicFill and streams it 566cdf0e10cSrcweir to the comment action. A closing end token is created in the destructor. 567cdf0e10cSrcweir Usages of Imp_GraphicFill are in Do_Paint_Object-methods of SdrCircObj, SdrPathObj and 568cdf0e10cSrcweir SdrRectObj. 569cdf0e10cSrcweir The token users pick various actions from SvtGraphicFill, so it may need to be added for all kind 570cdf0e10cSrcweir of filled objects, even simple colored polygons. It is added as extra information; the 571cdf0e10cSrcweir Metafile actions between the two tokens are interpreted as output generated from those 572cdf0e10cSrcweir fills. Thus, users have the choice to use the SvtGraphicFill info or the created output 573cdf0e10cSrcweir actions. 574cdf0e10cSrcweir Even for XFillTransparenceItem it is used, thus it may need to be supported in 575cdf0e10cSrcweir UnifiedTransparencePrimitive2D, too, when interpreted as normally filled PolyPolygon. 576cdf0e10cSrcweir Implemented for: 577cdf0e10cSrcweir PRIMITIVE2D_ID_POLYPOLYGONBITMAPPRIMITIVE2D, 578cdf0e10cSrcweir PRIMITIVE2D_ID_POLYPOLYGONHATCHPRIMITIVE2D, 579cdf0e10cSrcweir PRIMITIVE2D_ID_POLYPOLYGONGRADIENTPRIMITIVE2D, 580cdf0e10cSrcweir PRIMITIVE2D_ID_POLYPOLYGONCOLORPRIMITIVE2D, 581cdf0e10cSrcweir and for PRIMITIVE2D_ID_UNIFIEDTRANSPARENCEPRIMITIVE2D when detected unified transparence 582cdf0e10cSrcweir 583cdf0e10cSrcweir XPATHSTROKE_SEQ_BEGIN, XPATHSTROKE_SEQ_END: 584cdf0e10cSrcweir 585cdf0e10cSrcweir Similar to pathfill, but using SvtGraphicStroke instead. It also has two producers where one 586cdf0e10cSrcweir is also the GDIMetaFile::Rotate. Another user is MetaCommentAction::Move which modifies the 587cdf0e10cSrcweir contained path accordingly. 588cdf0e10cSrcweir The other one is SdrObject::Imp_DrawLineGeometry. It's done when MetaFile is set at OutDev and 589cdf0e10cSrcweir only when geometry is a single polygon (!). I see no reason for that; in the PS exporter this 590cdf0e10cSrcweir would hinder to make use of PolyPolygon strokes. I will need to add support at: 591cdf0e10cSrcweir PRIMITIVE2D_ID_POLYGONHAIRLINEPRIMITIVE2D 592cdf0e10cSrcweir PRIMITIVE2D_ID_POLYGONSTROKEPRIMITIVE2D 593cdf0e10cSrcweir PRIMITIVE2D_ID_POLYGONSTROKEARROWPRIMITIVE2D 594cdf0e10cSrcweir This can be done hierarchical, too. 595cdf0e10cSrcweir Okay, base implementation done based on those three primitives. 596cdf0e10cSrcweir 597cdf0e10cSrcweir FIELD_SEQ_BEGIN, FIELD_SEQ_END 598cdf0e10cSrcweir 599cdf0e10cSrcweir Used from slideshow for URLs, created from diverse SvxField implementations inside 600cdf0e10cSrcweir createBeginComment()/createEndComment(). createBeginComment() is used from editeng\impedit3.cxx 601cdf0e10cSrcweir inside ImpEditEngine::Paint. 602cdf0e10cSrcweir Created TextHierarchyFieldPrimitive2D and added needed infos there; it is an group primitive and wraps 603cdf0e10cSrcweir text primitives (but is not limited to that). It contains the field type if special actions for the 604cdf0e10cSrcweir support of FIELD_SEQ_BEGIN/END are needed; this is the case for Page and URL fields. If more is 605cdf0e10cSrcweir needed, it may be supported there. 606cdf0e10cSrcweir FIELD_SEQ_BEGIN;PageField 607cdf0e10cSrcweir FIELD_SEQ_END 608cdf0e10cSrcweir Okay, these are now completely supported by TextHierarchyFieldPrimitive2D. URL works, too. 609cdf0e10cSrcweir 610cdf0e10cSrcweir XTEXT 611cdf0e10cSrcweir 612cdf0e10cSrcweir XTEXT_EOC(i) end of character 613cdf0e10cSrcweir XTEXT_EOW(i) end of word 614cdf0e10cSrcweir XTEXT_EOS(i) end of sentence 615cdf0e10cSrcweir 616cdf0e10cSrcweir this three are with index and are created with the help of a i18n::XBreakIterator in 617cdf0e10cSrcweir ImplDrawWithComments. Simplifying, moving out text painting, reworking to create some 618cdf0e10cSrcweir data structure for holding those TEXT infos. 619cdf0e10cSrcweir Supported directly by TextSimplePortionPrimitive2D with adding a Locale to the basic text 620cdf0e10cSrcweir primitive. In the MetaFileRenderer, the creation is now done (see below). This has the advantage 621cdf0e10cSrcweir that this creations do not need to be done for all paints all the time. This would be 622cdf0e10cSrcweir expensive since the BreakIterator and it's usage is expensive and for each paint also the 623cdf0e10cSrcweir whole character stops would need to be created. 624cdf0e10cSrcweir Created only for TextDecoratedPortionPrimitive2D due to XTEXT_EOL and XTEXT_EOP (see below) 625cdf0e10cSrcweir 626cdf0e10cSrcweir XTEXT_EOL() end of line 627cdf0e10cSrcweir XTEXT_EOP() end of paragraph 628cdf0e10cSrcweir 629cdf0e10cSrcweir First try with boolean marks at TextDecoratedPortionPrimitive2D did not work too well, 630cdf0e10cSrcweir i decided to solve it with structure. I added the TextHierarchyPrimitives for this, 631cdf0e10cSrcweir namely: 632cdf0e10cSrcweir - TextHierarchyLinePrimitive2D: Encapsulates single line 633cdf0e10cSrcweir - TextHierarchyParagraphPrimitive2D: Encapsulates single paragraph 634cdf0e10cSrcweir - TextHierarchyBlockPrimitive2D: encapsulates object texts (only one ATM) 635cdf0e10cSrcweir Those are now supported in hierarchy. This means the MetaFile renderer will support them 636cdf0e10cSrcweir by using them, reculrively using their content and adding MetaFile comments as needed. 637cdf0e10cSrcweir This also means that when another text layouter will be used it will be necessary to 638cdf0e10cSrcweir create/support the same HierarchyPrimitives to support users. 639cdf0e10cSrcweir To transport the information using this hierarchy is best suited to all future needs; 640cdf0e10cSrcweir the slideshow will be able to profit from it directly when using primitives; all other 641cdf0e10cSrcweir renderers not interested in the text structure will just ignore the encapsulations. 642cdf0e10cSrcweir 643cdf0e10cSrcweir XTEXT_PAINTSHAPE_BEGIN, XTEXT_PAINTSHAPE_END 644cdf0e10cSrcweir Supported now by the TextHierarchyBlockPrimitive2D. 645cdf0e10cSrcweir 646cdf0e10cSrcweir EPSReplacementGraphic: 647cdf0e10cSrcweir Only used in goodies\source\filter.vcl\ieps\ieps.cxx and svx\source\xml\xmlgrhlp.cxx to 648cdf0e10cSrcweir hold the original EPS which was imported in the same MetaFile as first 2 entries. Only 649cdf0e10cSrcweir used to export the original again (if exists). 650cdf0e10cSrcweir Not necessary to support with MetaFuleRenderer. 651cdf0e10cSrcweir 652cdf0e10cSrcweir XTEXT_SCROLLRECT, XTEXT_PAINTRECT 653cdf0e10cSrcweir Currently used to get extra MetaFile infos using GraphicExporter which again uses 654cdf0e10cSrcweir SdrTextObj::GetTextScrollMetaFileAndRectangle(). ATM works with primitives since 655cdf0e10cSrcweir the rectangle data is added directly by the GraphicsExporter as comment. Does not need 656cdf0e10cSrcweir to be adapted at once. 657cdf0e10cSrcweir When adapting later, the only user - the diashow - should directly use the provided 658cdf0e10cSrcweir Anination infos in the appropriate primitives (e.g. AnimatedSwitchPrimitive2D) 659cdf0e10cSrcweir 660cdf0e10cSrcweir PRNSPOOL_TRANSPARENTBITMAP_BEGIN, PRNSPOOL_TRANSPARENTBITMAP_END 661cdf0e10cSrcweir VCL usage when printing PL -> THB. Okay, THB confirms that it is only used as 662cdf0e10cSrcweir a fix (hack) while VCL printing. It is needed to not downscale a bitmap which 663cdf0e10cSrcweir was explicitely created for the printer already again to some default maximum 664cdf0e10cSrcweir bitmap sizes. 665cdf0e10cSrcweir Nothing to do here for the primitive renderer. 666cdf0e10cSrcweir 667cdf0e10cSrcweir Support for vcl::PDFExtOutDevData: 668cdf0e10cSrcweir PL knows that SJ did that stuff, it's used to hold a pointer to PDFExtOutDevData at 669cdf0e10cSrcweir the OutDev. When set, some extra data is written there. Trying simple PDF export and 670cdf0e10cSrcweir watching if i get those infos. 671cdf0e10cSrcweir Well, a PDF export does not use e.g. ImpEditEngine::Paint since the PdfFilter uses 672cdf0e10cSrcweir the SdXImpressDocument::render and thus uses the VclMetafileProcessor2D. I will check 673cdf0e10cSrcweir if i get a PDFExtOutDevData at the target output device. 674cdf0e10cSrcweir Indeed, i get one. Checking what all may be done when that extra-device-info is there. 675cdf0e10cSrcweir 676cdf0e10cSrcweir All in all i have to talk to SJ. I will need to emulate some of those actions, but 677cdf0e10cSrcweir i need to discuss which ones. 678cdf0e10cSrcweir In the future, all those infos would be taken from the primitive sequence anyways, 679cdf0e10cSrcweir thus these extensions would potentially be temporary, too. 680cdf0e10cSrcweir Discussed with SJ, added the necessary support and tested it. Details follow. 681cdf0e10cSrcweir 682cdf0e10cSrcweir - In ImpEditEngine::Paint, paragraph infos and URL stuff is added. 683cdf0e10cSrcweir Added in primitive MetaFile renderer. 684cdf0e10cSrcweir Checking URL: Indeed, current version exports it, but it is missing in primitive 685cdf0e10cSrcweir CWS version. Adding support. 686cdf0e10cSrcweir Okay, URLs work. Checked, Done. 687cdf0e10cSrcweir 688cdf0e10cSrcweir - UnoControlPDFExportContact is only created when PDFExtOutDevData is used at the 689cdf0e10cSrcweir target and uno control data is created in UnoControlPDFExportContact::do_PaintObject. 690cdf0e10cSrcweir This may be added in primitive MetaFile renderer. 691cdf0e10cSrcweir Adding support... 692cdf0e10cSrcweir OOps, the necessary helper stuff is in svx/source/form/formpdxexport.cxx in namespace 693cdf0e10cSrcweir svxform. Have to talk to FS if this has to be like that. Especially since 694cdf0e10cSrcweir ::vcl::PDFWriter::AnyWidget is filled out, which is already part of vcl. 695cdf0e10cSrcweir Wrote an eMail to FS, he is on vacation currently. I see no reason why not to move 696cdf0e10cSrcweir that stuff to somewhere else, maybe tools or svtools ?!? We will see... 697cdf0e10cSrcweir Moved to toolkit, so i have to link against it. I tried VCL first, but it did 698cdf0e10cSrcweir not work since VCLUnoHelper::CreateFont is unresolved in VCL (!). Other then the name 699cdf0e10cSrcweir may imply, it is defined in toolkit (!). Since toolkit is linked against VCL itself, 700cdf0e10cSrcweir the lowest move,ment plave is toolkit. 701cdf0e10cSrcweir Checked form control export, it works well. Done. 702cdf0e10cSrcweir 703cdf0e10cSrcweir - In goodies, in GraphicObject::Draw, when the used Graphic is linked, infos are 704cdf0e10cSrcweir generated. I will need to check what happens here with primitives. 705cdf0e10cSrcweir To support, use of GraphicPrimitive2D (PRIMITIVE2D_ID_GRAPHICPRIMITIVE2D) may be needed. 706cdf0e10cSrcweir Added support, but feature is broken in main version, so i cannot test at all. 707cdf0e10cSrcweir Writing a bug to CL (or SJ) and seeing what happens (#i80380#). 708cdf0e10cSrcweir SJ took a look and we got it working. Tested VCL MetaFile Renderer based export, 709cdf0e10cSrcweir as intended, the original file is exported. Works, Done. 710cdf0e10cSrcweir 711cdf0e10cSrcweir 712cdf0e10cSrcweir 713cdf0e10cSrcweir 714cdf0e10cSrcweir To be done: 715cdf0e10cSrcweir 716cdf0e10cSrcweir - Maybe there are more places to take care of for vcl::PDFExtOutDevData! 717cdf0e10cSrcweir 718cdf0e10cSrcweir 719cdf0e10cSrcweir 720cdf0e10cSrcweir ****************************************************************************************************/ 721cdf0e10cSrcweir 722cdf0e10cSrcweir void VclMetafileProcessor2D::processBasePrimitive2D(const primitive2d::BasePrimitive2D& rCandidate) 723cdf0e10cSrcweir { 724cdf0e10cSrcweir switch(rCandidate.getPrimitive2DID()) 725cdf0e10cSrcweir { 726cdf0e10cSrcweir case PRIMITIVE2D_ID_WRONGSPELLPRIMITIVE2D : 727cdf0e10cSrcweir { 728cdf0e10cSrcweir // directdraw of wrong spell primitive 729cdf0e10cSrcweir // Ignore for VclMetafileProcessor2D, this is for printing and MetaFile recording only 730cdf0e10cSrcweir break; 731cdf0e10cSrcweir } 732cdf0e10cSrcweir case PRIMITIVE2D_ID_GRAPHICPRIMITIVE2D : 733cdf0e10cSrcweir { 734cdf0e10cSrcweir const primitive2d::GraphicPrimitive2D& rGraphicPrimitive = static_cast< const primitive2d::GraphicPrimitive2D& >(rCandidate); 735cdf0e10cSrcweir bool bUsingPDFExtOutDevData(false); 736cdf0e10cSrcweir basegfx::B2DVector aTranslate, aScale; 737cdf0e10cSrcweir static bool bSuppressPDFExtOutDevDataSupport(false); 738cdf0e10cSrcweir 739cdf0e10cSrcweir if(mpPDFExtOutDevData && !bSuppressPDFExtOutDevDataSupport) 740cdf0e10cSrcweir { 741cdf0e10cSrcweir // emulate data handling from UnoControlPDFExportContact, original see 742cdf0e10cSrcweir // svtools/source/graphic/grfmgr.cxx 743cdf0e10cSrcweir const Graphic& rGraphic = rGraphicPrimitive.getGraphicObject().GetGraphic(); 744cdf0e10cSrcweir 745cdf0e10cSrcweir if(rGraphic.IsLink()) 746cdf0e10cSrcweir { 747cdf0e10cSrcweir const GraphicAttr& rAttr = rGraphicPrimitive.getGraphicAttr(); 748cdf0e10cSrcweir 749cdf0e10cSrcweir if(!rAttr.IsSpecialDrawMode() && !rAttr.IsAdjusted()) 750cdf0e10cSrcweir { 751cdf0e10cSrcweir const basegfx::B2DHomMatrix& rTransform = rGraphicPrimitive.getTransform(); 752cdf0e10cSrcweir double fRotate, fShearX; 753cdf0e10cSrcweir rTransform.decompose(aScale, aTranslate, fRotate, fShearX); 754cdf0e10cSrcweir 755cdf0e10cSrcweir if( basegfx::fTools::equalZero( fRotate ) && ( aScale.getX() > 0.0 ) && ( aScale.getY() > 0.0 ) ) 756cdf0e10cSrcweir { 757cdf0e10cSrcweir bUsingPDFExtOutDevData = true; 758cdf0e10cSrcweir mpPDFExtOutDevData->BeginGroup(); 759cdf0e10cSrcweir } 760cdf0e10cSrcweir } 761cdf0e10cSrcweir } 762cdf0e10cSrcweir } 763cdf0e10cSrcweir 764cdf0e10cSrcweir // process recursively and add MetaFile comment 765cdf0e10cSrcweir process(rGraphicPrimitive.get2DDecomposition(getViewInformation2D())); 766cdf0e10cSrcweir 767cdf0e10cSrcweir if(bUsingPDFExtOutDevData) 768cdf0e10cSrcweir { 769cdf0e10cSrcweir // emulate data handling from UnoControlPDFExportContact, original see 770cdf0e10cSrcweir // svtools/source/graphic/grfmgr.cxx 771cdf0e10cSrcweir const basegfx::B2DRange aCurrentRange( 772cdf0e10cSrcweir aTranslate.getX(), aTranslate.getY(), 773cdf0e10cSrcweir aTranslate.getX() + aScale.getX(), aTranslate.getY() + aScale.getY()); 774cdf0e10cSrcweir const Rectangle aCurrentRect( 775cdf0e10cSrcweir sal_Int32(floor(aCurrentRange.getMinX())), sal_Int32(floor(aCurrentRange.getMinY())), 776cdf0e10cSrcweir sal_Int32(ceil(aCurrentRange.getMaxX())), sal_Int32(ceil(aCurrentRange.getMaxY()))); 777cdf0e10cSrcweir const GraphicAttr& rAttr = rGraphicPrimitive.getGraphicAttr(); 778cdf0e10cSrcweir Rectangle aCropRect; 779cdf0e10cSrcweir 780cdf0e10cSrcweir if(rAttr.IsCropped()) 781cdf0e10cSrcweir { 782cdf0e10cSrcweir // calculate scalings between real image size and logic object size. This 783cdf0e10cSrcweir // is necessary since the crop values are relative to original bitmap size 784cdf0e10cSrcweir double fFactorX(1.0); 785cdf0e10cSrcweir double fFactorY(1.0); 786cdf0e10cSrcweir 787cdf0e10cSrcweir { 788cdf0e10cSrcweir const MapMode aMapMode100thmm(MAP_100TH_MM); 789cdf0e10cSrcweir const Size aBitmapSize(Application::GetDefaultDevice()->LogicToLogic( 790cdf0e10cSrcweir rGraphicPrimitive.getGraphicObject().GetPrefSize(), 791cdf0e10cSrcweir rGraphicPrimitive.getGraphicObject().GetPrefMapMode(), aMapMode100thmm)); 792cdf0e10cSrcweir const double fDivX(aBitmapSize.Width() - rAttr.GetLeftCrop() - rAttr.GetRightCrop()); 793cdf0e10cSrcweir const double fDivY(aBitmapSize.Height() - rAttr.GetTopCrop() - rAttr.GetBottomCrop()); 794cdf0e10cSrcweir 795cdf0e10cSrcweir if(!basegfx::fTools::equalZero(fDivX)) 796cdf0e10cSrcweir { 797cdf0e10cSrcweir fFactorX = aScale.getX() / fDivX; 798cdf0e10cSrcweir } 799cdf0e10cSrcweir 800cdf0e10cSrcweir if(!basegfx::fTools::equalZero(fDivY)) 801cdf0e10cSrcweir { 802cdf0e10cSrcweir fFactorY = aScale.getY() / fDivY; 803cdf0e10cSrcweir } 804cdf0e10cSrcweir } 805cdf0e10cSrcweir 806cdf0e10cSrcweir // calculate crop range and rect 807cdf0e10cSrcweir basegfx::B2DRange aCropRange; 808cdf0e10cSrcweir aCropRange.expand(aCurrentRange.getMinimum() - basegfx::B2DPoint(rAttr.GetLeftCrop() * fFactorX, rAttr.GetTopCrop() * fFactorY)); 809cdf0e10cSrcweir aCropRange.expand(aCurrentRange.getMaximum() + basegfx::B2DPoint(rAttr.GetRightCrop() * fFactorX, rAttr.GetBottomCrop() * fFactorY)); 810cdf0e10cSrcweir 811cdf0e10cSrcweir aCropRect = Rectangle( 812cdf0e10cSrcweir sal_Int32(floor(aCropRange.getMinX())), sal_Int32(floor(aCropRange.getMinY())), 813cdf0e10cSrcweir sal_Int32(ceil(aCropRange.getMaxX())), sal_Int32(ceil(aCropRange.getMaxY()))); 814cdf0e10cSrcweir } 815cdf0e10cSrcweir 816cdf0e10cSrcweir mpPDFExtOutDevData->EndGroup(rGraphicPrimitive.getGraphicObject().GetGraphic(), 817cdf0e10cSrcweir rAttr.GetTransparency(), 818cdf0e10cSrcweir aCurrentRect, 819cdf0e10cSrcweir aCropRect); 820cdf0e10cSrcweir } 821cdf0e10cSrcweir 822cdf0e10cSrcweir break; 823cdf0e10cSrcweir } 824cdf0e10cSrcweir case PRIMITIVE2D_ID_CONTROLPRIMITIVE2D : 825cdf0e10cSrcweir { 826cdf0e10cSrcweir const primitive2d::ControlPrimitive2D& rControlPrimitive = static_cast< const primitive2d::ControlPrimitive2D& >(rCandidate); 827cdf0e10cSrcweir const uno::Reference< awt::XControl >& rXControl(rControlPrimitive.getXControl()); 828cdf0e10cSrcweir bool bIsPrintableControl(false); 829cdf0e10cSrcweir 830cdf0e10cSrcweir // find out if control is printable 831cdf0e10cSrcweir if(rXControl.is()) 832cdf0e10cSrcweir { 833cdf0e10cSrcweir try 834cdf0e10cSrcweir { 835cdf0e10cSrcweir uno::Reference< beans::XPropertySet > xModelProperties(rXControl->getModel(), uno::UNO_QUERY); 836cdf0e10cSrcweir uno::Reference< beans::XPropertySetInfo > xPropertyInfo(xModelProperties.is() 837cdf0e10cSrcweir ? xModelProperties->getPropertySetInfo() 838cdf0e10cSrcweir : uno::Reference< beans::XPropertySetInfo >()); 839cdf0e10cSrcweir const ::rtl::OUString sPrintablePropertyName(RTL_CONSTASCII_USTRINGPARAM("Printable")); 840cdf0e10cSrcweir 841cdf0e10cSrcweir if(xPropertyInfo.is() && xPropertyInfo->hasPropertyByName(sPrintablePropertyName)) 842cdf0e10cSrcweir { 843cdf0e10cSrcweir OSL_VERIFY(xModelProperties->getPropertyValue(sPrintablePropertyName) >>= bIsPrintableControl); 844cdf0e10cSrcweir } 845cdf0e10cSrcweir } 846cdf0e10cSrcweir catch(const uno::Exception&) 847cdf0e10cSrcweir { 848cdf0e10cSrcweir OSL_ENSURE(false, "VclMetafileProcessor2D: No access to printable flag of Control, caught an exception!"); 849cdf0e10cSrcweir } 850cdf0e10cSrcweir } 851cdf0e10cSrcweir 852cdf0e10cSrcweir // PDF export and printing only for printable controls 853cdf0e10cSrcweir if(bIsPrintableControl) 854cdf0e10cSrcweir { 855cdf0e10cSrcweir const bool bPDFExport(mpPDFExtOutDevData && mpPDFExtOutDevData->GetIsExportFormFields()); 856cdf0e10cSrcweir bool bDoProcessRecursively(true); 857cdf0e10cSrcweir 858cdf0e10cSrcweir if(bPDFExport) 859cdf0e10cSrcweir { 860cdf0e10cSrcweir // PDF export. Emulate data handling from UnoControlPDFExportContact 861cdf0e10cSrcweir // I have now moved describePDFControl to toolkit, thus i can implement the PDF 862cdf0e10cSrcweir // form control support now as follows 863cdf0e10cSrcweir ::std::auto_ptr< ::vcl::PDFWriter::AnyWidget > pPDFControl; 864cdf0e10cSrcweir ::toolkitform::describePDFControl( rXControl, pPDFControl, *mpPDFExtOutDevData ); 865cdf0e10cSrcweir 866cdf0e10cSrcweir if(pPDFControl.get()) 867cdf0e10cSrcweir { 868cdf0e10cSrcweir // still need to fill in the location (is a class Rectangle) 869cdf0e10cSrcweir const basegfx::B2DRange aRangeLogic(rControlPrimitive.getB2DRange(getViewInformation2D())); 870cdf0e10cSrcweir const Rectangle aRectLogic( 871cdf0e10cSrcweir (sal_Int32)floor(aRangeLogic.getMinX()), (sal_Int32)floor(aRangeLogic.getMinY()), 872cdf0e10cSrcweir (sal_Int32)ceil(aRangeLogic.getMaxX()), (sal_Int32)ceil(aRangeLogic.getMaxY())); 873cdf0e10cSrcweir pPDFControl->Location = aRectLogic; 874cdf0e10cSrcweir 875cdf0e10cSrcweir Size aFontSize(pPDFControl->TextFont.GetSize()); 876cdf0e10cSrcweir aFontSize = mpOutputDevice->LogicToLogic(aFontSize, MapMode(MAP_POINT), mpOutputDevice->GetMapMode()); 877cdf0e10cSrcweir pPDFControl->TextFont.SetSize(aFontSize); 878cdf0e10cSrcweir 879cdf0e10cSrcweir mpPDFExtOutDevData->BeginStructureElement(vcl::PDFWriter::Form); 880cdf0e10cSrcweir mpPDFExtOutDevData->CreateControl(*pPDFControl.get()); 881cdf0e10cSrcweir mpPDFExtOutDevData->EndStructureElement(); 882cdf0e10cSrcweir 883cdf0e10cSrcweir // no normal paint needed (see original UnoControlPDFExportContact::do_PaintObject); 884cdf0e10cSrcweir // do not process recursively 885cdf0e10cSrcweir bDoProcessRecursively = false; 886cdf0e10cSrcweir } 887cdf0e10cSrcweir else 888cdf0e10cSrcweir { 889cdf0e10cSrcweir // PDF export did not work, try simple output. 890cdf0e10cSrcweir // Fallback to printer output by not setting bDoProcessRecursively 891cdf0e10cSrcweir // to false. 892cdf0e10cSrcweir } 893cdf0e10cSrcweir } 894cdf0e10cSrcweir 895cdf0e10cSrcweir // #i93169# used flag the wrong way; true means that nothing was done yet 896cdf0e10cSrcweir if(bDoProcessRecursively) 897cdf0e10cSrcweir { 898cdf0e10cSrcweir // printer output 899cdf0e10cSrcweir try 900cdf0e10cSrcweir { 901cdf0e10cSrcweir // remember old graphics and create new 902cdf0e10cSrcweir uno::Reference< awt::XView > xControlView(rXControl, uno::UNO_QUERY_THROW); 903cdf0e10cSrcweir const uno::Reference< awt::XGraphics > xOriginalGraphics(xControlView->getGraphics()); 904cdf0e10cSrcweir const uno::Reference< awt::XGraphics > xNewGraphics(mpOutputDevice->CreateUnoGraphics()); 905cdf0e10cSrcweir 906cdf0e10cSrcweir if(xNewGraphics.is()) 907cdf0e10cSrcweir { 908cdf0e10cSrcweir // link graphics and view 909cdf0e10cSrcweir xControlView->setGraphics(xNewGraphics); 910cdf0e10cSrcweir 911cdf0e10cSrcweir // get position 912cdf0e10cSrcweir const basegfx::B2DHomMatrix aObjectToDiscrete(getViewInformation2D().getObjectToViewTransformation() * rControlPrimitive.getTransform()); 913cdf0e10cSrcweir const basegfx::B2DPoint aTopLeftDiscrete(aObjectToDiscrete * basegfx::B2DPoint(0.0, 0.0)); 914cdf0e10cSrcweir 915cdf0e10cSrcweir // draw it 916cdf0e10cSrcweir xControlView->draw(basegfx::fround(aTopLeftDiscrete.getX()), basegfx::fround(aTopLeftDiscrete.getY())); 917cdf0e10cSrcweir bDoProcessRecursively = false; 918cdf0e10cSrcweir 919cdf0e10cSrcweir // restore original graphics 920cdf0e10cSrcweir xControlView->setGraphics(xOriginalGraphics); 921cdf0e10cSrcweir } 922cdf0e10cSrcweir } 923cdf0e10cSrcweir catch( const uno::Exception& ) 924cdf0e10cSrcweir { 925cdf0e10cSrcweir OSL_ENSURE(false, "VclMetafileProcessor2D: Printing of Control failed, caught an exception!"); 926cdf0e10cSrcweir } 927cdf0e10cSrcweir } 928cdf0e10cSrcweir 929cdf0e10cSrcweir // process recursively if not done yet to export as decomposition (bitmap) 930cdf0e10cSrcweir if(bDoProcessRecursively) 931cdf0e10cSrcweir { 932cdf0e10cSrcweir process(rControlPrimitive.get2DDecomposition(getViewInformation2D())); 933cdf0e10cSrcweir } 934cdf0e10cSrcweir } 935cdf0e10cSrcweir 936cdf0e10cSrcweir break; 937cdf0e10cSrcweir } 938cdf0e10cSrcweir case PRIMITIVE2D_ID_TEXTHIERARCHYFIELDPRIMITIVE2D : 939cdf0e10cSrcweir { 940cdf0e10cSrcweir // support for FIELD_SEQ_BEGIN, FIELD_SEQ_END and URL. It wraps text primitives (but is not limited to) 941cdf0e10cSrcweir // thus do the MetafileAction embedding stuff but just handle recursively. 942cdf0e10cSrcweir const primitive2d::TextHierarchyFieldPrimitive2D& rFieldPrimitive = static_cast< const primitive2d::TextHierarchyFieldPrimitive2D& >(rCandidate); 943cdf0e10cSrcweir static const ByteString aCommentStringCommon("FIELD_SEQ_BEGIN"); 944cdf0e10cSrcweir static const ByteString aCommentStringPage("FIELD_SEQ_BEGIN;PageField"); 945cdf0e10cSrcweir static const ByteString aCommentStringEnd("FIELD_SEQ_END"); 946cdf0e10cSrcweir 947cdf0e10cSrcweir switch(rFieldPrimitive.getType()) 948cdf0e10cSrcweir { 949cdf0e10cSrcweir default : // case drawinglayer::primitive2d::FIELD_TYPE_COMMON : 950cdf0e10cSrcweir { 951cdf0e10cSrcweir mpMetaFile->AddAction(new MetaCommentAction(aCommentStringCommon)); 952cdf0e10cSrcweir break; 953cdf0e10cSrcweir } 954cdf0e10cSrcweir case drawinglayer::primitive2d::FIELD_TYPE_PAGE : 955cdf0e10cSrcweir { 956cdf0e10cSrcweir mpMetaFile->AddAction(new MetaCommentAction(aCommentStringPage)); 957cdf0e10cSrcweir break; 958cdf0e10cSrcweir } 959cdf0e10cSrcweir case drawinglayer::primitive2d::FIELD_TYPE_URL : 960cdf0e10cSrcweir { 961cdf0e10cSrcweir const rtl::OUString& rURL = rFieldPrimitive.getString(); 962cdf0e10cSrcweir const String aOldString(rURL); 963cdf0e10cSrcweir mpMetaFile->AddAction(new MetaCommentAction(aCommentStringCommon, 0, reinterpret_cast< const sal_uInt8* >(aOldString.GetBuffer()), 2 * aOldString.Len())); 964cdf0e10cSrcweir break; 965cdf0e10cSrcweir } 966cdf0e10cSrcweir } 967cdf0e10cSrcweir 968cdf0e10cSrcweir // process recursively 969cdf0e10cSrcweir const primitive2d::Primitive2DSequence rContent = rFieldPrimitive.get2DDecomposition(getViewInformation2D()); 970cdf0e10cSrcweir process(rContent); 971cdf0e10cSrcweir 972cdf0e10cSrcweir // for the end comment the type is not relevant yet, they are all the same. Just add. 973cdf0e10cSrcweir mpMetaFile->AddAction(new MetaCommentAction(aCommentStringEnd)); 974cdf0e10cSrcweir 975cdf0e10cSrcweir if(mpPDFExtOutDevData && drawinglayer::primitive2d::FIELD_TYPE_URL == rFieldPrimitive.getType()) 976cdf0e10cSrcweir { 977cdf0e10cSrcweir // emulate data handling from ImpEditEngine::Paint 978cdf0e10cSrcweir const basegfx::B2DRange aViewRange(primitive2d::getB2DRangeFromPrimitive2DSequence(rContent, getViewInformation2D())); 979cdf0e10cSrcweir const Rectangle aRectLogic( 980cdf0e10cSrcweir (sal_Int32)floor(aViewRange.getMinX()), (sal_Int32)floor(aViewRange.getMinY()), 981cdf0e10cSrcweir (sal_Int32)ceil(aViewRange.getMaxX()), (sal_Int32)ceil(aViewRange.getMaxY())); 982cdf0e10cSrcweir vcl::PDFExtOutDevBookmarkEntry aBookmark; 983cdf0e10cSrcweir aBookmark.nLinkId = mpPDFExtOutDevData->CreateLink(aRectLogic); 984cdf0e10cSrcweir aBookmark.aBookmark = rFieldPrimitive.getString(); 985cdf0e10cSrcweir std::vector< vcl::PDFExtOutDevBookmarkEntry >& rBookmarks = mpPDFExtOutDevData->GetBookmarks(); 986cdf0e10cSrcweir rBookmarks.push_back( aBookmark ); 987cdf0e10cSrcweir } 988cdf0e10cSrcweir 989cdf0e10cSrcweir break; 990cdf0e10cSrcweir } 991cdf0e10cSrcweir case PRIMITIVE2D_ID_TEXTHIERARCHYLINEPRIMITIVE2D : 992cdf0e10cSrcweir { 993cdf0e10cSrcweir const primitive2d::TextHierarchyLinePrimitive2D& rLinePrimitive = static_cast< const primitive2d::TextHierarchyLinePrimitive2D& >(rCandidate); 994cdf0e10cSrcweir static const ByteString aCommentString("XTEXT_EOL"); 995cdf0e10cSrcweir 996cdf0e10cSrcweir // process recursively and add MetaFile comment 997cdf0e10cSrcweir process(rLinePrimitive.get2DDecomposition(getViewInformation2D())); 998cdf0e10cSrcweir mpMetaFile->AddAction(new MetaCommentAction(aCommentString)); 999cdf0e10cSrcweir 1000cdf0e10cSrcweir break; 1001cdf0e10cSrcweir } 1002cdf0e10cSrcweir case PRIMITIVE2D_ID_TEXTHIERARCHYBULLETPRIMITIVE2D : 1003cdf0e10cSrcweir { 1004cdf0e10cSrcweir // in Outliner::PaintBullet(), a MetafileComment for bullets is added, too. The 1005cdf0e10cSrcweir // "XTEXT_EOC" is used, use here, too. 1006cdf0e10cSrcweir const primitive2d::TextHierarchyBulletPrimitive2D& rBulletPrimitive = static_cast< const primitive2d::TextHierarchyBulletPrimitive2D& >(rCandidate); 1007cdf0e10cSrcweir static const ByteString aCommentString("XTEXT_EOC"); 1008cdf0e10cSrcweir 1009cdf0e10cSrcweir // process recursively and add MetaFile comment 1010cdf0e10cSrcweir process(rBulletPrimitive.get2DDecomposition(getViewInformation2D())); 1011cdf0e10cSrcweir mpMetaFile->AddAction(new MetaCommentAction(aCommentString)); 1012cdf0e10cSrcweir 1013cdf0e10cSrcweir break; 1014cdf0e10cSrcweir } 1015cdf0e10cSrcweir case PRIMITIVE2D_ID_TEXTHIERARCHYPARAGRAPHPRIMITIVE2D : 1016cdf0e10cSrcweir { 1017cdf0e10cSrcweir const primitive2d::TextHierarchyParagraphPrimitive2D& rParagraphPrimitive = static_cast< const primitive2d::TextHierarchyParagraphPrimitive2D& >(rCandidate); 1018cdf0e10cSrcweir static const ByteString aCommentString("XTEXT_EOP"); 1019cdf0e10cSrcweir 1020cdf0e10cSrcweir if(mpPDFExtOutDevData) 1021cdf0e10cSrcweir { 1022cdf0e10cSrcweir // emulate data handling from ImpEditEngine::Paint 1023cdf0e10cSrcweir mpPDFExtOutDevData->BeginStructureElement( vcl::PDFWriter::Paragraph ); 1024cdf0e10cSrcweir } 1025cdf0e10cSrcweir 1026cdf0e10cSrcweir // process recursively and add MetaFile comment 1027cdf0e10cSrcweir process(rParagraphPrimitive.get2DDecomposition(getViewInformation2D())); 1028cdf0e10cSrcweir mpMetaFile->AddAction(new MetaCommentAction(aCommentString)); 1029cdf0e10cSrcweir 1030cdf0e10cSrcweir if(mpPDFExtOutDevData) 1031cdf0e10cSrcweir { 1032cdf0e10cSrcweir // emulate data handling from ImpEditEngine::Paint 1033cdf0e10cSrcweir mpPDFExtOutDevData->EndStructureElement(); 1034cdf0e10cSrcweir } 1035cdf0e10cSrcweir 1036cdf0e10cSrcweir break; 1037cdf0e10cSrcweir } 1038cdf0e10cSrcweir case PRIMITIVE2D_ID_TEXTHIERARCHYBLOCKPRIMITIVE2D : 1039cdf0e10cSrcweir { 1040cdf0e10cSrcweir const primitive2d::TextHierarchyBlockPrimitive2D& rBlockPrimitive = static_cast< const primitive2d::TextHierarchyBlockPrimitive2D& >(rCandidate); 1041cdf0e10cSrcweir static const ByteString aCommentStringA("XTEXT_PAINTSHAPE_BEGIN"); 1042cdf0e10cSrcweir static const ByteString aCommentStringB("XTEXT_PAINTSHAPE_END"); 1043cdf0e10cSrcweir 1044cdf0e10cSrcweir // add MetaFile comment, process recursively and add MetaFile comment 1045cdf0e10cSrcweir mpMetaFile->AddAction(new MetaCommentAction(aCommentStringA)); 1046cdf0e10cSrcweir process(rBlockPrimitive.get2DDecomposition(getViewInformation2D())); 1047cdf0e10cSrcweir mpMetaFile->AddAction(new MetaCommentAction(aCommentStringB)); 1048cdf0e10cSrcweir 1049cdf0e10cSrcweir break; 1050cdf0e10cSrcweir } 1051cdf0e10cSrcweir case PRIMITIVE2D_ID_TEXTSIMPLEPORTIONPRIMITIVE2D : 1052cdf0e10cSrcweir case PRIMITIVE2D_ID_TEXTDECORATEDPORTIONPRIMITIVE2D : 1053cdf0e10cSrcweir { 1054cdf0e10cSrcweir // for supporting TEXT_ MetaFile actions there is more to do here; get the candidate 1055cdf0e10cSrcweir const primitive2d::TextSimplePortionPrimitive2D& rTextCandidate = static_cast< const primitive2d::TextSimplePortionPrimitive2D& >(rCandidate); 1056cdf0e10cSrcweir // const primitive2d::TextDecoratedPortionPrimitive2D* pTextDecoratedCandidate = dynamic_cast< const primitive2d::TextDecoratedPortionPrimitive2D* >(&rCandidate); 1057cdf0e10cSrcweir 1058cdf0e10cSrcweir // Adapt evtl. used special DrawMode 1059cdf0e10cSrcweir const sal_uInt32 nOriginalDrawMode(mpOutputDevice->GetDrawMode()); 1060cdf0e10cSrcweir adaptTextToFillDrawMode(); 1061cdf0e10cSrcweir 1062cdf0e10cSrcweir // directdraw of text simple portion; use default processing 1063cdf0e10cSrcweir RenderTextSimpleOrDecoratedPortionPrimitive2D(rTextCandidate); 1064cdf0e10cSrcweir 1065cdf0e10cSrcweir // restore DrawMode 1066cdf0e10cSrcweir mpOutputDevice->SetDrawMode(nOriginalDrawMode); 1067cdf0e10cSrcweir 1068cdf0e10cSrcweir // #i101169# if(pTextDecoratedCandidate) 1069cdf0e10cSrcweir { 1070cdf0e10cSrcweir // support for TEXT_ MetaFile actions only for decorated texts 1071cdf0e10cSrcweir if(!mxBreakIterator.is()) 1072cdf0e10cSrcweir { 1073cdf0e10cSrcweir uno::Reference< ::com::sun::star::lang::XMultiServiceFactory > xMSF(::comphelper::getProcessServiceFactory()); 1074cdf0e10cSrcweir mxBreakIterator.set(xMSF->createInstance(rtl::OUString::createFromAscii("com.sun.star.i18n.BreakIterator")), uno::UNO_QUERY); 1075cdf0e10cSrcweir } 1076cdf0e10cSrcweir 1077cdf0e10cSrcweir if(mxBreakIterator.is()) 1078cdf0e10cSrcweir { 1079cdf0e10cSrcweir const rtl::OUString& rTxt = rTextCandidate.getText(); 1080cdf0e10cSrcweir const sal_Int32 nTextLength(rTextCandidate.getTextLength()); // rTxt.getLength()); 1081cdf0e10cSrcweir 1082cdf0e10cSrcweir if(nTextLength) 1083cdf0e10cSrcweir { 1084cdf0e10cSrcweir const ::com::sun::star::lang::Locale& rLocale = rTextCandidate.getLocale(); 1085cdf0e10cSrcweir const sal_Int32 nTextPosition(rTextCandidate.getTextPosition()); 1086cdf0e10cSrcweir 1087cdf0e10cSrcweir sal_Int32 nDone; 1088cdf0e10cSrcweir sal_Int32 nNextCellBreak(mxBreakIterator->nextCharacters(rTxt, nTextPosition, rLocale, ::com::sun::star::i18n::CharacterIteratorMode::SKIPCELL, 0, nDone)); 1089cdf0e10cSrcweir ::com::sun::star::i18n::Boundary nNextWordBoundary(mxBreakIterator->getWordBoundary(rTxt, nTextPosition, rLocale, ::com::sun::star::i18n::WordType::ANY_WORD, sal_True)); 1090cdf0e10cSrcweir sal_Int32 nNextSentenceBreak(mxBreakIterator->endOfSentence(rTxt, nTextPosition, rLocale)); 1091cdf0e10cSrcweir static const ByteString aCommentStringA("XTEXT_EOC"); 1092cdf0e10cSrcweir static const ByteString aCommentStringB("XTEXT_EOW"); 1093cdf0e10cSrcweir static const ByteString aCommentStringC("XTEXT_EOS"); 1094cdf0e10cSrcweir 1095cdf0e10cSrcweir for(sal_Int32 i(nTextPosition); i < nTextPosition + nTextLength; i++) 1096cdf0e10cSrcweir { 1097cdf0e10cSrcweir // create the entries for the respective break positions 1098cdf0e10cSrcweir if(i == nNextCellBreak) 1099cdf0e10cSrcweir { 1100cdf0e10cSrcweir mpMetaFile->AddAction(new MetaCommentAction(aCommentStringA, i - nTextPosition)); 1101cdf0e10cSrcweir nNextCellBreak = mxBreakIterator->nextCharacters(rTxt, i, rLocale, ::com::sun::star::i18n::CharacterIteratorMode::SKIPCELL, 1, nDone); 1102cdf0e10cSrcweir } 1103cdf0e10cSrcweir if(i == nNextWordBoundary.endPos) 1104cdf0e10cSrcweir { 1105cdf0e10cSrcweir mpMetaFile->AddAction(new MetaCommentAction(aCommentStringB, i - nTextPosition)); 1106cdf0e10cSrcweir nNextWordBoundary = mxBreakIterator->getWordBoundary(rTxt, i + 1, rLocale, ::com::sun::star::i18n::WordType::ANY_WORD, sal_True); 1107cdf0e10cSrcweir } 1108cdf0e10cSrcweir if(i == nNextSentenceBreak) 1109cdf0e10cSrcweir { 1110cdf0e10cSrcweir mpMetaFile->AddAction(new MetaCommentAction(aCommentStringC, i - nTextPosition)); 1111cdf0e10cSrcweir nNextSentenceBreak = mxBreakIterator->endOfSentence(rTxt, i + 1, rLocale); 1112cdf0e10cSrcweir } 1113cdf0e10cSrcweir } 1114cdf0e10cSrcweir } 1115cdf0e10cSrcweir } 1116cdf0e10cSrcweir } 1117cdf0e10cSrcweir 1118cdf0e10cSrcweir break; 1119cdf0e10cSrcweir } 1120cdf0e10cSrcweir case PRIMITIVE2D_ID_POLYGONHAIRLINEPRIMITIVE2D : 1121cdf0e10cSrcweir { 1122cdf0e10cSrcweir const primitive2d::PolygonHairlinePrimitive2D& rHairlinePrimitive = static_cast< const primitive2d::PolygonHairlinePrimitive2D& >(rCandidate); 1123cdf0e10cSrcweir const basegfx::B2DPolygon& rBasePolygon = rHairlinePrimitive.getB2DPolygon(); 1124cdf0e10cSrcweir 1125cdf0e10cSrcweir if(rBasePolygon.count() > (MAX_POLYGON_POINT_COUNT_METAFILE - 1)) 1126cdf0e10cSrcweir { 1127cdf0e10cSrcweir // #i112245# Metafiles use tools Polygon and are not able to have more than 65535 points 1128cdf0e10cSrcweir // per polygon. If there are more, split the polygon in half and call recursively 1129cdf0e10cSrcweir basegfx::B2DPolygon aLeft, aRight; 1130cdf0e10cSrcweir splitLinePolygon(rBasePolygon, aLeft, aRight); 1131cdf0e10cSrcweir const primitive2d::PolygonHairlinePrimitive2D aPLeft(aLeft, rHairlinePrimitive.getBColor()); 1132cdf0e10cSrcweir const primitive2d::PolygonHairlinePrimitive2D aPRight(aRight, rHairlinePrimitive.getBColor()); 1133cdf0e10cSrcweir 1134cdf0e10cSrcweir processBasePrimitive2D(aPLeft); 1135cdf0e10cSrcweir processBasePrimitive2D(aPRight); 1136cdf0e10cSrcweir } 1137cdf0e10cSrcweir else 1138cdf0e10cSrcweir { 1139cdf0e10cSrcweir // direct draw of hairline; use default processing 1140cdf0e10cSrcweir // support SvtGraphicStroke MetaCommentAction 1141cdf0e10cSrcweir const basegfx::BColor aLineColor(maBColorModifierStack.getModifiedColor(rHairlinePrimitive.getBColor())); 1142cdf0e10cSrcweir SvtGraphicStroke* pSvtGraphicStroke = impTryToCreateSvtGraphicStroke( 1143cdf0e10cSrcweir rHairlinePrimitive.getB2DPolygon(), 1144cdf0e10cSrcweir &aLineColor, 1145cdf0e10cSrcweir 0, 0, 0, 0); 1146cdf0e10cSrcweir 1147cdf0e10cSrcweir impStartSvtGraphicStroke(pSvtGraphicStroke); 1148cdf0e10cSrcweir RenderPolygonHairlinePrimitive2D(static_cast< const primitive2d::PolygonHairlinePrimitive2D& >(rCandidate), false); 1149cdf0e10cSrcweir impEndSvtGraphicStroke(pSvtGraphicStroke); 1150cdf0e10cSrcweir } 1151cdf0e10cSrcweir break; 1152cdf0e10cSrcweir } 1153cdf0e10cSrcweir case PRIMITIVE2D_ID_POLYGONSTROKEPRIMITIVE2D : 1154cdf0e10cSrcweir { 1155cdf0e10cSrcweir const primitive2d::PolygonStrokePrimitive2D& rStrokePrimitive = static_cast< const primitive2d::PolygonStrokePrimitive2D& >(rCandidate); 1156cdf0e10cSrcweir const basegfx::B2DPolygon& rBasePolygon = rStrokePrimitive.getB2DPolygon(); 1157cdf0e10cSrcweir 1158cdf0e10cSrcweir if(rBasePolygon.count() > (MAX_POLYGON_POINT_COUNT_METAFILE - 1)) 1159cdf0e10cSrcweir { 1160cdf0e10cSrcweir // #i112245# Metafiles use tools Polygon and are not able to have more than 65535 points 1161cdf0e10cSrcweir // per polygon. If there are more, split the polygon in half and call recursively 1162cdf0e10cSrcweir basegfx::B2DPolygon aLeft, aRight; 1163cdf0e10cSrcweir splitLinePolygon(rBasePolygon, aLeft, aRight); 1164cdf0e10cSrcweir const primitive2d::PolygonStrokePrimitive2D aPLeft( 1165cdf0e10cSrcweir aLeft, rStrokePrimitive.getLineAttribute(), rStrokePrimitive.getStrokeAttribute()); 1166cdf0e10cSrcweir const primitive2d::PolygonStrokePrimitive2D aPRight( 1167cdf0e10cSrcweir aRight, rStrokePrimitive.getLineAttribute(), rStrokePrimitive.getStrokeAttribute()); 1168cdf0e10cSrcweir 1169cdf0e10cSrcweir processBasePrimitive2D(aPLeft); 1170cdf0e10cSrcweir processBasePrimitive2D(aPRight); 1171cdf0e10cSrcweir } 1172cdf0e10cSrcweir else 1173cdf0e10cSrcweir { 1174cdf0e10cSrcweir // support SvtGraphicStroke MetaCommentAction 1175cdf0e10cSrcweir SvtGraphicStroke* pSvtGraphicStroke = impTryToCreateSvtGraphicStroke( 1176cdf0e10cSrcweir rBasePolygon, 0, 1177cdf0e10cSrcweir &rStrokePrimitive.getLineAttribute(), 1178cdf0e10cSrcweir &rStrokePrimitive.getStrokeAttribute(), 1179cdf0e10cSrcweir 0, 0); 1180cdf0e10cSrcweir 1181cdf0e10cSrcweir impStartSvtGraphicStroke(pSvtGraphicStroke); 1182cdf0e10cSrcweir const attribute::LineAttribute& rLine = rStrokePrimitive.getLineAttribute(); 1183cdf0e10cSrcweir 1184cdf0e10cSrcweir // create MetaPolyLineActions, but without LINE_DASH 1185cdf0e10cSrcweir if(basegfx::fTools::more(rLine.getWidth(), 0.0)) 1186cdf0e10cSrcweir { 1187cdf0e10cSrcweir const attribute::StrokeAttribute& rStroke = rStrokePrimitive.getStrokeAttribute(); 1188cdf0e10cSrcweir basegfx::B2DPolyPolygon aHairLinePolyPolygon; 1189cdf0e10cSrcweir 1190cdf0e10cSrcweir if(0.0 == rStroke.getFullDotDashLen()) 1191cdf0e10cSrcweir { 1192cdf0e10cSrcweir aHairLinePolyPolygon.append(rBasePolygon); 1193cdf0e10cSrcweir } 1194cdf0e10cSrcweir else 1195cdf0e10cSrcweir { 1196cdf0e10cSrcweir basegfx::tools::applyLineDashing( 1197cdf0e10cSrcweir rBasePolygon, rStroke.getDotDashArray(), 1198cdf0e10cSrcweir &aHairLinePolyPolygon, 0, rStroke.getFullDotDashLen()); 1199cdf0e10cSrcweir } 1200cdf0e10cSrcweir 1201cdf0e10cSrcweir const basegfx::BColor aHairlineColor(maBColorModifierStack.getModifiedColor(rLine.getColor())); 1202cdf0e10cSrcweir mpOutputDevice->SetLineColor(Color(aHairlineColor)); 1203cdf0e10cSrcweir mpOutputDevice->SetFillColor(); 1204cdf0e10cSrcweir aHairLinePolyPolygon.transform(maCurrentTransformation); 1205cdf0e10cSrcweir 1206cdf0e10cSrcweir // #i113922# LineWidth needs to be transformed, too 1207cdf0e10cSrcweir const basegfx::B2DVector aDiscreteUnit(maCurrentTransformation * basegfx::B2DVector(rLine.getWidth(), 0.0)); 1208cdf0e10cSrcweir const double fDiscreteLineWidth(aDiscreteUnit.getLength()); 1209cdf0e10cSrcweir 1210cdf0e10cSrcweir LineInfo aLineInfo(LINE_SOLID, basegfx::fround(fDiscreteLineWidth)); 1211cdf0e10cSrcweir aLineInfo.SetLineJoin(rLine.getLineJoin()); 1212cdf0e10cSrcweir 1213cdf0e10cSrcweir for(sal_uInt32 a(0); a < aHairLinePolyPolygon.count(); a++) 1214cdf0e10cSrcweir { 1215cdf0e10cSrcweir const basegfx::B2DPolygon aCandidate(aHairLinePolyPolygon.getB2DPolygon(a)); 1216cdf0e10cSrcweir 1217cdf0e10cSrcweir if(aCandidate.count() > 1) 1218cdf0e10cSrcweir { 1219cdf0e10cSrcweir const Polygon aToolsPolygon(aCandidate); 1220cdf0e10cSrcweir 1221cdf0e10cSrcweir mpMetaFile->AddAction(new MetaPolyLineAction(aToolsPolygon, aLineInfo)); 1222cdf0e10cSrcweir } 1223cdf0e10cSrcweir } 1224cdf0e10cSrcweir } 1225cdf0e10cSrcweir else 1226cdf0e10cSrcweir { 1227cdf0e10cSrcweir process(rCandidate.get2DDecomposition(getViewInformation2D())); 1228cdf0e10cSrcweir } 1229cdf0e10cSrcweir 1230cdf0e10cSrcweir impEndSvtGraphicStroke(pSvtGraphicStroke); 1231cdf0e10cSrcweir } 1232cdf0e10cSrcweir 1233cdf0e10cSrcweir break; 1234cdf0e10cSrcweir } 1235cdf0e10cSrcweir case PRIMITIVE2D_ID_POLYGONSTROKEARROWPRIMITIVE2D : 1236cdf0e10cSrcweir { 1237cdf0e10cSrcweir const primitive2d::PolygonStrokeArrowPrimitive2D& rStrokeArrowPrimitive = static_cast< const primitive2d::PolygonStrokeArrowPrimitive2D& >(rCandidate); 1238cdf0e10cSrcweir const basegfx::B2DPolygon& rBasePolygon = rStrokeArrowPrimitive.getB2DPolygon(); 1239cdf0e10cSrcweir 1240cdf0e10cSrcweir if(rBasePolygon.count() > (MAX_POLYGON_POINT_COUNT_METAFILE - 1)) 1241cdf0e10cSrcweir { 1242cdf0e10cSrcweir // #i112245# Metafiles use tools Polygon and are not able to have more than 65535 points 1243cdf0e10cSrcweir // per polygon. If there are more, split the polygon in half and call recursively 1244cdf0e10cSrcweir basegfx::B2DPolygon aLeft, aRight; 1245cdf0e10cSrcweir splitLinePolygon(rBasePolygon, aLeft, aRight); 1246cdf0e10cSrcweir const attribute::LineStartEndAttribute aEmpty; 1247cdf0e10cSrcweir const primitive2d::PolygonStrokeArrowPrimitive2D aPLeft( 1248cdf0e10cSrcweir aLeft, 1249cdf0e10cSrcweir rStrokeArrowPrimitive.getLineAttribute(), 1250cdf0e10cSrcweir rStrokeArrowPrimitive.getStrokeAttribute(), 1251cdf0e10cSrcweir rStrokeArrowPrimitive.getStart(), 1252cdf0e10cSrcweir aEmpty); 1253cdf0e10cSrcweir const primitive2d::PolygonStrokeArrowPrimitive2D aPRight( 1254cdf0e10cSrcweir aRight, 1255cdf0e10cSrcweir rStrokeArrowPrimitive.getLineAttribute(), 1256cdf0e10cSrcweir rStrokeArrowPrimitive.getStrokeAttribute(), 1257cdf0e10cSrcweir aEmpty, 1258cdf0e10cSrcweir rStrokeArrowPrimitive.getEnd()); 1259cdf0e10cSrcweir 1260cdf0e10cSrcweir processBasePrimitive2D(aPLeft); 1261cdf0e10cSrcweir processBasePrimitive2D(aPRight); 1262cdf0e10cSrcweir } 1263cdf0e10cSrcweir else 1264cdf0e10cSrcweir { 1265cdf0e10cSrcweir // support SvtGraphicStroke MetaCommentAction 1266cdf0e10cSrcweir SvtGraphicStroke* pSvtGraphicStroke = impTryToCreateSvtGraphicStroke( 1267cdf0e10cSrcweir rBasePolygon, 0, 1268cdf0e10cSrcweir &rStrokeArrowPrimitive.getLineAttribute(), 1269cdf0e10cSrcweir &rStrokeArrowPrimitive.getStrokeAttribute(), 1270cdf0e10cSrcweir &rStrokeArrowPrimitive.getStart(), 1271cdf0e10cSrcweir &rStrokeArrowPrimitive.getEnd()); 1272cdf0e10cSrcweir 1273cdf0e10cSrcweir impStartSvtGraphicStroke(pSvtGraphicStroke); 1274cdf0e10cSrcweir process(rCandidate.get2DDecomposition(getViewInformation2D())); 1275cdf0e10cSrcweir impEndSvtGraphicStroke(pSvtGraphicStroke); 1276cdf0e10cSrcweir } 1277cdf0e10cSrcweir 1278cdf0e10cSrcweir break; 1279cdf0e10cSrcweir } 1280cdf0e10cSrcweir case PRIMITIVE2D_ID_BITMAPPRIMITIVE2D : 1281cdf0e10cSrcweir { 1282cdf0e10cSrcweir // direct draw of transformed BitmapEx primitive; use default processing 1283cdf0e10cSrcweir RenderBitmapPrimitive2D(static_cast< const primitive2d::BitmapPrimitive2D& >(rCandidate)); 1284cdf0e10cSrcweir break; 1285cdf0e10cSrcweir } 1286cdf0e10cSrcweir case PRIMITIVE2D_ID_POLYPOLYGONBITMAPPRIMITIVE2D : 1287cdf0e10cSrcweir { 1288cdf0e10cSrcweir // need to handle PolyPolygonBitmapPrimitive2D here to support XPATHFILL_SEQ_BEGIN/XPATHFILL_SEQ_END 1289cdf0e10cSrcweir const primitive2d::PolyPolygonBitmapPrimitive2D& rBitmapCandidate = static_cast< const primitive2d::PolyPolygonBitmapPrimitive2D& >(rCandidate); 1290cdf0e10cSrcweir basegfx::B2DPolyPolygon aLocalPolyPolygon(rBitmapCandidate.getB2DPolyPolygon()); 1291cdf0e10cSrcweir 1292cdf0e10cSrcweir if(fillPolyPolygonNeededToBeSplit(aLocalPolyPolygon)) 1293cdf0e10cSrcweir { 1294cdf0e10cSrcweir // #i112245# Metafiles use tools Polygon and are not able to have more than 65535 points 1295cdf0e10cSrcweir // per polygon. If there are more use the splitted polygon and call recursively 1296cdf0e10cSrcweir const primitive2d::PolyPolygonBitmapPrimitive2D aSplitted( 1297cdf0e10cSrcweir aLocalPolyPolygon, 1298cdf0e10cSrcweir rBitmapCandidate.getFillBitmap()); 1299cdf0e10cSrcweir 1300cdf0e10cSrcweir processBasePrimitive2D(aSplitted); 1301cdf0e10cSrcweir } 1302cdf0e10cSrcweir else 1303cdf0e10cSrcweir { 1304cdf0e10cSrcweir SvtGraphicFill* pSvtGraphicFill = 0; 1305cdf0e10cSrcweir 1306cdf0e10cSrcweir if(!mnSvtGraphicFillCount && aLocalPolyPolygon.count()) 1307cdf0e10cSrcweir { 1308cdf0e10cSrcweir aLocalPolyPolygon.transform(maCurrentTransformation); 1309cdf0e10cSrcweir // calculate transformation. Get real object size, all values in FillBitmapAttribute 1310cdf0e10cSrcweir // are relative to the unified object 1311cdf0e10cSrcweir const attribute::FillBitmapAttribute& rFillBitmapAttribute = rBitmapCandidate .getFillBitmap(); 1312cdf0e10cSrcweir const basegfx::B2DRange aOutlineRange(basegfx::tools::getRange(aLocalPolyPolygon)); 1313cdf0e10cSrcweir const basegfx::B2DVector aOutlineSize(aOutlineRange.getRange()); 1314cdf0e10cSrcweir 1315cdf0e10cSrcweir // get absolute values 1316cdf0e10cSrcweir const basegfx::B2DVector aFillBitmapSize(rFillBitmapAttribute.getSize() * aOutlineSize); 1317cdf0e10cSrcweir const basegfx::B2DPoint aFillBitmapTopLeft(rFillBitmapAttribute.getTopLeft() * aOutlineSize); 1318cdf0e10cSrcweir 1319cdf0e10cSrcweir // the scaling needs scale from pixel to logic coordinate system 1320cdf0e10cSrcweir const BitmapEx& rBitmapEx = rFillBitmapAttribute.getBitmapEx(); 1321cdf0e10cSrcweir Size aBmpSizePixel(rBitmapEx.GetSizePixel()); 1322cdf0e10cSrcweir 1323cdf0e10cSrcweir if(!aBmpSizePixel.Width()) 1324cdf0e10cSrcweir { 1325cdf0e10cSrcweir aBmpSizePixel.Width() = 1; 1326cdf0e10cSrcweir } 1327cdf0e10cSrcweir 1328cdf0e10cSrcweir if(!aBmpSizePixel.Height()) 1329cdf0e10cSrcweir { 1330cdf0e10cSrcweir aBmpSizePixel.Height() = 1; 1331cdf0e10cSrcweir } 1332cdf0e10cSrcweir 1333cdf0e10cSrcweir // setup transformation like in impgrfll 1334cdf0e10cSrcweir SvtGraphicFill::Transform aTransform; 1335cdf0e10cSrcweir 1336cdf0e10cSrcweir // scale values are divided by bitmap pixel sizes 1337cdf0e10cSrcweir aTransform.matrix[0] = aFillBitmapSize.getX() / aBmpSizePixel.Width(); 1338cdf0e10cSrcweir aTransform.matrix[4] = aFillBitmapSize.getY() / aBmpSizePixel.Height(); 1339cdf0e10cSrcweir 1340cdf0e10cSrcweir // translates are absolute 1341cdf0e10cSrcweir aTransform.matrix[2] = aFillBitmapTopLeft.getX(); 1342cdf0e10cSrcweir aTransform.matrix[5] = aFillBitmapTopLeft.getY(); 1343cdf0e10cSrcweir 1344cdf0e10cSrcweir // setup fill graphic like in impgrfll 1345cdf0e10cSrcweir Graphic aFillGraphic = Graphic(rBitmapEx); 1346cdf0e10cSrcweir aFillGraphic.SetPrefMapMode(MapMode(MAP_PIXEL)); 1347cdf0e10cSrcweir aFillGraphic.SetPrefSize(aBmpSizePixel); 1348cdf0e10cSrcweir 1349cdf0e10cSrcweir pSvtGraphicFill = new SvtGraphicFill( 1350cdf0e10cSrcweir PolyPolygon(aLocalPolyPolygon), 1351cdf0e10cSrcweir Color(), 1352cdf0e10cSrcweir 0.0, 1353cdf0e10cSrcweir SvtGraphicFill::fillEvenOdd, 1354cdf0e10cSrcweir SvtGraphicFill::fillTexture, 1355cdf0e10cSrcweir aTransform, 1356cdf0e10cSrcweir rFillBitmapAttribute.getTiling(), 1357cdf0e10cSrcweir SvtGraphicFill::hatchSingle, 1358cdf0e10cSrcweir Color(), 1359cdf0e10cSrcweir SvtGraphicFill::gradientLinear, 1360cdf0e10cSrcweir Color(), 1361cdf0e10cSrcweir Color(), 1362cdf0e10cSrcweir 0, 1363cdf0e10cSrcweir aFillGraphic); 1364cdf0e10cSrcweir } 1365cdf0e10cSrcweir 1366cdf0e10cSrcweir // Do use decomposition; encapsulate with SvtGraphicFill 1367cdf0e10cSrcweir impStartSvtGraphicFill(pSvtGraphicFill); 1368cdf0e10cSrcweir process(rCandidate.get2DDecomposition(getViewInformation2D())); 1369cdf0e10cSrcweir impEndSvtGraphicFill(pSvtGraphicFill); 1370cdf0e10cSrcweir } 1371cdf0e10cSrcweir 1372cdf0e10cSrcweir break; 1373cdf0e10cSrcweir } 1374cdf0e10cSrcweir case PRIMITIVE2D_ID_POLYPOLYGONHATCHPRIMITIVE2D : 1375cdf0e10cSrcweir { 1376cdf0e10cSrcweir // need to handle PolyPolygonHatchPrimitive2D here to support XPATHFILL_SEQ_BEGIN/XPATHFILL_SEQ_END 1377cdf0e10cSrcweir const primitive2d::PolyPolygonHatchPrimitive2D& rHatchCandidate = static_cast< const primitive2d::PolyPolygonHatchPrimitive2D& >(rCandidate); 1378cdf0e10cSrcweir const attribute::FillHatchAttribute& rFillHatchAttribute = rHatchCandidate.getFillHatch(); 1379cdf0e10cSrcweir basegfx::B2DPolyPolygon aLocalPolyPolygon(rHatchCandidate.getB2DPolyPolygon()); 1380cdf0e10cSrcweir 1381cdf0e10cSrcweir // #i112245# Metafiles use tools Polygon and are not able to have more than 65535 points 1382cdf0e10cSrcweir // per polygon. Split polygon until there are less than that 1383cdf0e10cSrcweir while(fillPolyPolygonNeededToBeSplit(aLocalPolyPolygon)) 1384cdf0e10cSrcweir ; 1385cdf0e10cSrcweir 1386cdf0e10cSrcweir if(rFillHatchAttribute.isFillBackground()) 1387cdf0e10cSrcweir { 1388cdf0e10cSrcweir // with fixing #i111954# (see below) the possible background 1389cdf0e10cSrcweir // fill of a hatched object was lost.Generate a background fill 1390cdf0e10cSrcweir // primitive and render it 1391cdf0e10cSrcweir const primitive2d::Primitive2DReference xBackground( 1392cdf0e10cSrcweir new primitive2d::PolyPolygonColorPrimitive2D( 1393cdf0e10cSrcweir aLocalPolyPolygon, 1394cdf0e10cSrcweir rHatchCandidate.getBackgroundColor())); 1395cdf0e10cSrcweir 1396cdf0e10cSrcweir process(primitive2d::Primitive2DSequence(&xBackground, 1)); 1397cdf0e10cSrcweir } 1398cdf0e10cSrcweir 1399cdf0e10cSrcweir SvtGraphicFill* pSvtGraphicFill = 0; 1400cdf0e10cSrcweir aLocalPolyPolygon.transform(maCurrentTransformation); 1401cdf0e10cSrcweir 1402cdf0e10cSrcweir if(!mnSvtGraphicFillCount && aLocalPolyPolygon.count()) 1403cdf0e10cSrcweir { 1404cdf0e10cSrcweir // re-create a VCL hatch as base data 1405cdf0e10cSrcweir SvtGraphicFill::HatchType eHatch(SvtGraphicFill::hatchSingle); 1406cdf0e10cSrcweir 1407cdf0e10cSrcweir switch(rFillHatchAttribute.getStyle()) 1408cdf0e10cSrcweir { 1409cdf0e10cSrcweir default: // attribute::HATCHSTYLE_SINGLE : 1410cdf0e10cSrcweir { 1411cdf0e10cSrcweir eHatch = SvtGraphicFill::hatchSingle; 1412cdf0e10cSrcweir break; 1413cdf0e10cSrcweir } 1414cdf0e10cSrcweir case attribute::HATCHSTYLE_DOUBLE : 1415cdf0e10cSrcweir { 1416cdf0e10cSrcweir eHatch = SvtGraphicFill::hatchDouble; 1417cdf0e10cSrcweir break; 1418cdf0e10cSrcweir } 1419cdf0e10cSrcweir case attribute::HATCHSTYLE_TRIPLE : 1420cdf0e10cSrcweir { 1421cdf0e10cSrcweir eHatch = SvtGraphicFill::hatchTriple; 1422cdf0e10cSrcweir break; 1423cdf0e10cSrcweir } 1424cdf0e10cSrcweir } 1425cdf0e10cSrcweir 1426cdf0e10cSrcweir SvtGraphicFill::Transform aTransform; 1427cdf0e10cSrcweir 1428cdf0e10cSrcweir // scale 1429cdf0e10cSrcweir aTransform.matrix[0] *= rFillHatchAttribute.getDistance(); 1430cdf0e10cSrcweir aTransform.matrix[4] *= rFillHatchAttribute.getDistance(); 1431cdf0e10cSrcweir 1432cdf0e10cSrcweir // rotate (was never correct in impgrfll anyways, use correct angle now) 1433cdf0e10cSrcweir aTransform.matrix[0] *= cos(rFillHatchAttribute.getAngle()); 1434cdf0e10cSrcweir aTransform.matrix[1] *= -sin(rFillHatchAttribute.getAngle()); 1435cdf0e10cSrcweir aTransform.matrix[3] *= sin(rFillHatchAttribute.getAngle()); 1436cdf0e10cSrcweir aTransform.matrix[4] *= cos(rFillHatchAttribute.getAngle()); 1437cdf0e10cSrcweir 1438cdf0e10cSrcweir pSvtGraphicFill = new SvtGraphicFill( 1439cdf0e10cSrcweir PolyPolygon(aLocalPolyPolygon), 1440cdf0e10cSrcweir Color(), 1441cdf0e10cSrcweir 0.0, 1442cdf0e10cSrcweir SvtGraphicFill::fillEvenOdd, 1443cdf0e10cSrcweir SvtGraphicFill::fillHatch, 1444cdf0e10cSrcweir aTransform, 1445cdf0e10cSrcweir false, 1446cdf0e10cSrcweir eHatch, 1447cdf0e10cSrcweir Color(rFillHatchAttribute.getColor()), 1448cdf0e10cSrcweir SvtGraphicFill::gradientLinear, 1449cdf0e10cSrcweir Color(), 1450cdf0e10cSrcweir Color(), 1451cdf0e10cSrcweir 0, 1452cdf0e10cSrcweir Graphic()); 1453cdf0e10cSrcweir } 1454cdf0e10cSrcweir 1455cdf0e10cSrcweir // Do use decomposition; encapsulate with SvtGraphicFill 1456cdf0e10cSrcweir impStartSvtGraphicFill(pSvtGraphicFill); 1457cdf0e10cSrcweir 1458cdf0e10cSrcweir // #i111954# do NOT use decomposition, but use direct VCL-command 1459cdf0e10cSrcweir // process(rCandidate.get2DDecomposition(getViewInformation2D())); 1460cdf0e10cSrcweir const PolyPolygon aToolsPolyPolygon(aLocalPolyPolygon); 1461cdf0e10cSrcweir const HatchStyle aHatchStyle( 1462cdf0e10cSrcweir attribute::HATCHSTYLE_SINGLE == rFillHatchAttribute.getStyle() ? HATCH_SINGLE : 1463cdf0e10cSrcweir attribute::HATCHSTYLE_DOUBLE == rFillHatchAttribute.getStyle() ? HATCH_DOUBLE : 1464cdf0e10cSrcweir HATCH_TRIPLE); 1465cdf0e10cSrcweir 1466cdf0e10cSrcweir mpOutputDevice->DrawHatch(aToolsPolyPolygon, 1467cdf0e10cSrcweir Hatch(aHatchStyle, 1468cdf0e10cSrcweir Color(rFillHatchAttribute.getColor()), 1469cdf0e10cSrcweir basegfx::fround(rFillHatchAttribute.getDistance()), 1470cdf0e10cSrcweir basegfx::fround(rFillHatchAttribute.getAngle() / F_PI1800))); 1471cdf0e10cSrcweir 1472cdf0e10cSrcweir impEndSvtGraphicFill(pSvtGraphicFill); 1473cdf0e10cSrcweir 1474cdf0e10cSrcweir break; 1475cdf0e10cSrcweir } 1476cdf0e10cSrcweir case PRIMITIVE2D_ID_POLYPOLYGONGRADIENTPRIMITIVE2D : 1477cdf0e10cSrcweir { 1478cdf0e10cSrcweir const primitive2d::PolyPolygonGradientPrimitive2D& rGradientCandidate = static_cast< const primitive2d::PolyPolygonGradientPrimitive2D& >(rCandidate); 1479cdf0e10cSrcweir basegfx::B2DPolyPolygon aLocalPolyPolygon(rGradientCandidate.getB2DPolyPolygon()); 1480cdf0e10cSrcweir 1481cdf0e10cSrcweir // #i112245# Metafiles use tools Polygon and are not able to have more than 65535 points 1482cdf0e10cSrcweir // per polygon. Split polygon until there are less than that 1483cdf0e10cSrcweir while(fillPolyPolygonNeededToBeSplit(aLocalPolyPolygon)) 1484cdf0e10cSrcweir ; 1485cdf0e10cSrcweir 1486cdf0e10cSrcweir // for support of MetaCommentActions of the form XGRAD_SEQ_BEGIN, XGRAD_SEQ_END 1487cdf0e10cSrcweir // it is safest to use the VCL OutputDevice::DrawGradient method which creates those. 1488cdf0e10cSrcweir // re-create a VCL-gradient from FillGradientPrimitive2D and the needed tools PolyPolygon 1489cdf0e10cSrcweir Gradient aVCLGradient; 1490cdf0e10cSrcweir impConvertFillGradientAttributeToVCLGradient(aVCLGradient, rGradientCandidate.getFillGradient(), false); 1491cdf0e10cSrcweir aLocalPolyPolygon.transform(maCurrentTransformation); 1492cdf0e10cSrcweir 1493cdf0e10cSrcweir // #i82145# ATM VCL printing of gradients using curved shapes does not work, 1494cdf0e10cSrcweir // i submitted the bug with the given ID to THB. When that task is fixed it is 1495cdf0e10cSrcweir // necessary to again remove this subdivision since it decreases possible 1496cdf0e10cSrcweir // printing quality (not even resolution-dependent for now). THB will tell 1497cdf0e10cSrcweir // me when that task is fixed in the master 1498cdf0e10cSrcweir const PolyPolygon aToolsPolyPolygon(basegfx::tools::adaptiveSubdivideByAngle(aLocalPolyPolygon)); 1499cdf0e10cSrcweir 1500cdf0e10cSrcweir // XPATHFILL_SEQ_BEGIN/XPATHFILL_SEQ_END support 1501cdf0e10cSrcweir SvtGraphicFill* pSvtGraphicFill = 0; 1502cdf0e10cSrcweir 1503cdf0e10cSrcweir if(!mnSvtGraphicFillCount && aLocalPolyPolygon.count()) 1504cdf0e10cSrcweir { 1505cdf0e10cSrcweir // setup gradient stuff like in like in impgrfll 1506cdf0e10cSrcweir SvtGraphicFill::GradientType eGrad(SvtGraphicFill::gradientLinear); 1507cdf0e10cSrcweir 1508cdf0e10cSrcweir switch(aVCLGradient.GetStyle()) 1509cdf0e10cSrcweir { 1510cdf0e10cSrcweir default : // GRADIENT_LINEAR: 1511cdf0e10cSrcweir case GRADIENT_AXIAL: 1512cdf0e10cSrcweir eGrad = SvtGraphicFill::gradientLinear; 1513cdf0e10cSrcweir break; 1514cdf0e10cSrcweir case GRADIENT_RADIAL: 1515cdf0e10cSrcweir case GRADIENT_ELLIPTICAL: 1516cdf0e10cSrcweir eGrad = SvtGraphicFill::gradientRadial; 1517cdf0e10cSrcweir break; 1518cdf0e10cSrcweir case GRADIENT_SQUARE: 1519cdf0e10cSrcweir case GRADIENT_RECT: 1520cdf0e10cSrcweir eGrad = SvtGraphicFill::gradientRectangular; 1521cdf0e10cSrcweir break; 1522cdf0e10cSrcweir } 1523cdf0e10cSrcweir 1524cdf0e10cSrcweir pSvtGraphicFill = new SvtGraphicFill( 1525cdf0e10cSrcweir aToolsPolyPolygon, 1526cdf0e10cSrcweir Color(), 1527cdf0e10cSrcweir 0.0, 1528cdf0e10cSrcweir SvtGraphicFill::fillEvenOdd, 1529cdf0e10cSrcweir SvtGraphicFill::fillGradient, 1530cdf0e10cSrcweir SvtGraphicFill::Transform(), 1531cdf0e10cSrcweir false, 1532cdf0e10cSrcweir SvtGraphicFill::hatchSingle, 1533cdf0e10cSrcweir Color(), 1534cdf0e10cSrcweir eGrad, 1535cdf0e10cSrcweir aVCLGradient.GetStartColor(), 1536cdf0e10cSrcweir aVCLGradient.GetEndColor(), 1537cdf0e10cSrcweir aVCLGradient.GetSteps(), 1538cdf0e10cSrcweir Graphic()); 1539cdf0e10cSrcweir } 1540cdf0e10cSrcweir 1541cdf0e10cSrcweir // call VCL directly; encapsulate with SvtGraphicFill 1542cdf0e10cSrcweir impStartSvtGraphicFill(pSvtGraphicFill); 1543cdf0e10cSrcweir mpOutputDevice->DrawGradient(aToolsPolyPolygon, aVCLGradient); 1544cdf0e10cSrcweir impEndSvtGraphicFill(pSvtGraphicFill); 1545cdf0e10cSrcweir 1546cdf0e10cSrcweir // NO usage of common own gradient randerer, not used ATM for VCL MetaFile, see text above 1547cdf0e10cSrcweir // RenderPolyPolygonGradientPrimitive2D(static_cast< const primitive2d::PolyPolygonGradientPrimitive2D& >(rCandidate)); 1548cdf0e10cSrcweir 1549cdf0e10cSrcweir break; 1550cdf0e10cSrcweir } 1551cdf0e10cSrcweir case PRIMITIVE2D_ID_POLYPOLYGONCOLORPRIMITIVE2D : 1552cdf0e10cSrcweir { 1553cdf0e10cSrcweir const primitive2d::PolyPolygonColorPrimitive2D& rPolygonCandidate(static_cast< const primitive2d::PolyPolygonColorPrimitive2D& >(rCandidate)); 1554cdf0e10cSrcweir basegfx::B2DPolyPolygon aLocalPolyPolygon(rPolygonCandidate.getB2DPolyPolygon()); 1555cdf0e10cSrcweir 1556cdf0e10cSrcweir // #i112245# Metafiles use tools Polygon and are not able to have more than 65535 points 1557cdf0e10cSrcweir // per polygon. Split polygon until there are less than that 1558cdf0e10cSrcweir while(fillPolyPolygonNeededToBeSplit(aLocalPolyPolygon)) 1559cdf0e10cSrcweir ; 1560cdf0e10cSrcweir 1561cdf0e10cSrcweir const basegfx::BColor aPolygonColor(maBColorModifierStack.getModifiedColor(rPolygonCandidate.getBColor())); 1562cdf0e10cSrcweir aLocalPolyPolygon.transform(maCurrentTransformation); 1563cdf0e10cSrcweir 1564cdf0e10cSrcweir // XPATHFILL_SEQ_BEGIN/XPATHFILL_SEQ_END support 1565cdf0e10cSrcweir SvtGraphicFill* pSvtGraphicFill = 0; 1566cdf0e10cSrcweir 1567cdf0e10cSrcweir if(!mnSvtGraphicFillCount && aLocalPolyPolygon.count()) 1568cdf0e10cSrcweir { 1569cdf0e10cSrcweir // setup simple color fill stuff like in impgrfll 1570cdf0e10cSrcweir pSvtGraphicFill = new SvtGraphicFill( 1571cdf0e10cSrcweir PolyPolygon(aLocalPolyPolygon), 1572cdf0e10cSrcweir Color(aPolygonColor), 1573cdf0e10cSrcweir 0.0, 1574cdf0e10cSrcweir SvtGraphicFill::fillEvenOdd, 1575cdf0e10cSrcweir SvtGraphicFill::fillSolid, 1576cdf0e10cSrcweir SvtGraphicFill::Transform(), 1577cdf0e10cSrcweir false, 1578cdf0e10cSrcweir SvtGraphicFill::hatchSingle, 1579cdf0e10cSrcweir Color(), 1580cdf0e10cSrcweir SvtGraphicFill::gradientLinear, 1581cdf0e10cSrcweir Color(), 1582cdf0e10cSrcweir Color(), 1583cdf0e10cSrcweir 0, 1584cdf0e10cSrcweir Graphic()); 1585cdf0e10cSrcweir } 1586cdf0e10cSrcweir 1587cdf0e10cSrcweir // set line and fill color 1588cdf0e10cSrcweir mpOutputDevice->SetFillColor(Color(aPolygonColor)); 1589cdf0e10cSrcweir mpOutputDevice->SetLineColor(); 1590cdf0e10cSrcweir 1591cdf0e10cSrcweir // call VCL directly; encapsulate with SvtGraphicFill 1592cdf0e10cSrcweir impStartSvtGraphicFill(pSvtGraphicFill); 1593cdf0e10cSrcweir mpOutputDevice->DrawPolyPolygon(aLocalPolyPolygon); 1594cdf0e10cSrcweir impEndSvtGraphicFill(pSvtGraphicFill); 1595cdf0e10cSrcweir 1596cdf0e10cSrcweir break; 1597cdf0e10cSrcweir } 1598cdf0e10cSrcweir case PRIMITIVE2D_ID_METAFILEPRIMITIVE2D : 1599cdf0e10cSrcweir { 1600dfe9de19SHerbert Dürr static bool bUseMetaFilePrimitiveDecomposition(true); 1601dfe9de19SHerbert Dürr 1602dfe9de19SHerbert Dürr if(bUseMetaFilePrimitiveDecomposition) 1603dfe9de19SHerbert Dürr { 1604dfe9de19SHerbert Dürr // use new Metafile decomposition 1605dfe9de19SHerbert Dürr process(rCandidate.get2DDecomposition(getViewInformation2D())); 1606dfe9de19SHerbert Dürr } 1607dfe9de19SHerbert Dürr else 1608dfe9de19SHerbert Dürr { 1609dfe9de19SHerbert Dürr // direct draw of MetaFile, use default pocessing 1610dfe9de19SHerbert Dürr RenderMetafilePrimitive2D(static_cast< const primitive2d::MetafilePrimitive2D& >(rCandidate)); 1611dfe9de19SHerbert Dürr } 1612dfe9de19SHerbert Dürr 1613dfe9de19SHerbert Dürr break; 1614cdf0e10cSrcweir } 1615cdf0e10cSrcweir case PRIMITIVE2D_ID_MASKPRIMITIVE2D : 1616cdf0e10cSrcweir { 1617cdf0e10cSrcweir // mask group. Special handling for MetaFiles. 1618cdf0e10cSrcweir const primitive2d::MaskPrimitive2D& rMaskCandidate = static_cast< const primitive2d::MaskPrimitive2D& >(rCandidate); 1619cdf0e10cSrcweir 1620cdf0e10cSrcweir if(rMaskCandidate.getChildren().hasElements()) 1621cdf0e10cSrcweir { 1622cdf0e10cSrcweir basegfx::B2DPolyPolygon aMask(rMaskCandidate.getMask()); 1623cdf0e10cSrcweir 1624cdf0e10cSrcweir if(aMask.count()) 1625cdf0e10cSrcweir { 1626cdf0e10cSrcweir // prepare new mask polygon and rescue current one 1627cdf0e10cSrcweir aMask.transform(maCurrentTransformation); 1628cdf0e10cSrcweir const basegfx::B2DPolyPolygon aLastClipPolyPolygon(maClipPolyPolygon); 1629cdf0e10cSrcweir 1630cdf0e10cSrcweir if(maClipPolyPolygon.count()) 1631cdf0e10cSrcweir { 1632cdf0e10cSrcweir // there is already a clip polygon set; build clipped union of 1633cdf0e10cSrcweir // current mask polygon and new one 1634cdf0e10cSrcweir maClipPolyPolygon = basegfx::tools::clipPolyPolygonOnPolyPolygon( 1635cdf0e10cSrcweir aMask, 1636cdf0e10cSrcweir maClipPolyPolygon, 1637cdf0e10cSrcweir true, // #i106516# we want the inside of aMask, not the outside 1638cdf0e10cSrcweir false); 1639cdf0e10cSrcweir } 1640cdf0e10cSrcweir else 1641cdf0e10cSrcweir { 1642cdf0e10cSrcweir // use mask directly 1643cdf0e10cSrcweir maClipPolyPolygon = aMask; 1644cdf0e10cSrcweir } 1645cdf0e10cSrcweir 1646cdf0e10cSrcweir if(maClipPolyPolygon.count()) 1647cdf0e10cSrcweir { 1648cdf0e10cSrcweir // set VCL clip region; subdivide before conversion to tools polygon. Subdivision necessary (!) 1649cdf0e10cSrcweir // Removed subdivision and fixed in Region::ImplPolyPolyRegionToBandRegionFunc() in VCL where 1650cdf0e10cSrcweir // the ClipRegion is built from the Polygon. A AdaptiveSubdivide on the source polygon was missing there 1651cdf0e10cSrcweir mpOutputDevice->Push(PUSH_CLIPREGION); 1652cdf0e10cSrcweir //mpOutputDevice->SetClipRegion(Region(PolyPolygon(basegfx::tools::adaptiveSubdivideByAngle(maClipPolyPolygon)))); 1653*ddde725dSArmin Le Grand //mpOutputDevice->SetClipRegion(Region(PolyPolygon(maClipPolyPolygon))); 1654*ddde725dSArmin Le Grand mpOutputDevice->SetClipRegion(Region(maClipPolyPolygon)); 1655cdf0e10cSrcweir } 1656cdf0e10cSrcweir 1657cdf0e10cSrcweir // recursively paint content 1658cdf0e10cSrcweir process(rMaskCandidate.getChildren()); 1659cdf0e10cSrcweir 1660cdf0e10cSrcweir if(maClipPolyPolygon.count()) 1661cdf0e10cSrcweir { 1662cdf0e10cSrcweir // restore VCL clip region 1663cdf0e10cSrcweir mpOutputDevice->Pop(); 1664cdf0e10cSrcweir } 1665cdf0e10cSrcweir 1666cdf0e10cSrcweir // restore to rescued clip polygon 1667cdf0e10cSrcweir maClipPolyPolygon = aLastClipPolyPolygon; 1668cdf0e10cSrcweir } 1669cdf0e10cSrcweir else 1670cdf0e10cSrcweir { 1671cdf0e10cSrcweir // no mask, no clipping. recursively paint content 1672cdf0e10cSrcweir process(rMaskCandidate.getChildren()); 1673cdf0e10cSrcweir } 1674cdf0e10cSrcweir } 1675cdf0e10cSrcweir 1676cdf0e10cSrcweir break; 1677cdf0e10cSrcweir } 1678cdf0e10cSrcweir case PRIMITIVE2D_ID_MODIFIEDCOLORPRIMITIVE2D : 1679cdf0e10cSrcweir { 1680cdf0e10cSrcweir // modified color group. Force output to unified color. Use default pocessing. 1681cdf0e10cSrcweir RenderModifiedColorPrimitive2D(static_cast< const primitive2d::ModifiedColorPrimitive2D& >(rCandidate)); 1682cdf0e10cSrcweir break; 1683cdf0e10cSrcweir } 1684cdf0e10cSrcweir case PRIMITIVE2D_ID_HIDDENGEOMETRYPRIMITIVE2D : 1685cdf0e10cSrcweir { 1686cdf0e10cSrcweir // HiddenGeometryPrimitive2D; to rebuilt the old MetaFile creation, it is necessary to 1687cdf0e10cSrcweir // not ignore them (as it was thought), but to add a MetaFile entry for them. 1688cdf0e10cSrcweir basegfx::B2DRange aInvisibleRange(rCandidate.getB2DRange(getViewInformation2D())); 1689cdf0e10cSrcweir 1690cdf0e10cSrcweir if(!aInvisibleRange.isEmpty()) 1691cdf0e10cSrcweir { 1692cdf0e10cSrcweir aInvisibleRange.transform(maCurrentTransformation); 1693cdf0e10cSrcweir const Rectangle aRectLogic( 1694cdf0e10cSrcweir (sal_Int32)floor(aInvisibleRange.getMinX()), (sal_Int32)floor(aInvisibleRange.getMinY()), 1695cdf0e10cSrcweir (sal_Int32)ceil(aInvisibleRange.getMaxX()), (sal_Int32)ceil(aInvisibleRange.getMaxY())); 1696cdf0e10cSrcweir 1697cdf0e10cSrcweir mpOutputDevice->SetFillColor(); 1698cdf0e10cSrcweir mpOutputDevice->SetLineColor(); 1699cdf0e10cSrcweir mpOutputDevice->DrawRect(aRectLogic); 1700cdf0e10cSrcweir } 1701cdf0e10cSrcweir 1702cdf0e10cSrcweir break; 1703cdf0e10cSrcweir } 1704cdf0e10cSrcweir case PRIMITIVE2D_ID_UNIFIEDTRANSPARENCEPRIMITIVE2D : 1705cdf0e10cSrcweir { 1706cdf0e10cSrcweir // for metafile: Need to examine what the pure vcl version is doing here actually 1707cdf0e10cSrcweir // - uses DrawTransparent with metafile for content and a gradient 1708cdf0e10cSrcweir // - uses DrawTransparent for single PolyPoylgons directly. Can be detected by 1709cdf0e10cSrcweir // checking the content for single PolyPolygonColorPrimitive2D 1710cdf0e10cSrcweir const primitive2d::UnifiedTransparencePrimitive2D& rUniTransparenceCandidate = static_cast< const primitive2d::UnifiedTransparencePrimitive2D& >(rCandidate); 1711cdf0e10cSrcweir const primitive2d::Primitive2DSequence rContent = rUniTransparenceCandidate.getChildren(); 1712cdf0e10cSrcweir 1713cdf0e10cSrcweir if(rContent.hasElements()) 1714cdf0e10cSrcweir { 1715cdf0e10cSrcweir if(0.0 == rUniTransparenceCandidate.getTransparence()) 1716cdf0e10cSrcweir { 1717cdf0e10cSrcweir // not transparent at all, use content 1718cdf0e10cSrcweir process(rUniTransparenceCandidate.getChildren()); 1719cdf0e10cSrcweir } 1720cdf0e10cSrcweir else if(rUniTransparenceCandidate.getTransparence() > 0.0 && rUniTransparenceCandidate.getTransparence() < 1.0) 1721cdf0e10cSrcweir { 1722cdf0e10cSrcweir // try to identify a single PolyPolygonColorPrimitive2D in the 1723cdf0e10cSrcweir // content part of the transparence primitive 1724cdf0e10cSrcweir const primitive2d::PolyPolygonColorPrimitive2D* pPoPoColor = 0; 1725cdf0e10cSrcweir static bool bForceToMetafile(false); 1726cdf0e10cSrcweir 1727cdf0e10cSrcweir if(!bForceToMetafile && 1 == rContent.getLength()) 1728cdf0e10cSrcweir { 1729cdf0e10cSrcweir const primitive2d::Primitive2DReference xReference(rContent[0]); 1730cdf0e10cSrcweir pPoPoColor = dynamic_cast< const primitive2d::PolyPolygonColorPrimitive2D* >(xReference.get()); 1731cdf0e10cSrcweir } 1732cdf0e10cSrcweir 1733cdf0e10cSrcweir // PolyPolygonGradientPrimitive2D, PolyPolygonHatchPrimitive2D and 1734cdf0e10cSrcweir // PolyPolygonBitmapPrimitive2D are derived from PolyPolygonColorPrimitive2D. 1735cdf0e10cSrcweir // Check also for correct ID to exclude derived implementations 1736cdf0e10cSrcweir if(pPoPoColor && PRIMITIVE2D_ID_POLYPOLYGONCOLORPRIMITIVE2D == pPoPoColor->getPrimitive2DID()) 1737cdf0e10cSrcweir { 1738cdf0e10cSrcweir // single transparent PolyPolygon identified, use directly 1739cdf0e10cSrcweir const basegfx::BColor aPolygonColor(maBColorModifierStack.getModifiedColor(pPoPoColor->getBColor())); 1740cdf0e10cSrcweir basegfx::B2DPolyPolygon aLocalPolyPolygon(pPoPoColor->getB2DPolyPolygon()); 1741cdf0e10cSrcweir 1742cdf0e10cSrcweir // #i112245# Metafiles use tools Polygon and are not able to have more than 65535 points 1743cdf0e10cSrcweir // per polygon. Split polygon until there are less than that 1744cdf0e10cSrcweir while(fillPolyPolygonNeededToBeSplit(aLocalPolyPolygon)) 1745cdf0e10cSrcweir ; 1746cdf0e10cSrcweir 1747cdf0e10cSrcweir // now transform 1748cdf0e10cSrcweir aLocalPolyPolygon.transform(maCurrentTransformation); 1749cdf0e10cSrcweir 1750cdf0e10cSrcweir // XPATHFILL_SEQ_BEGIN/XPATHFILL_SEQ_END support 1751cdf0e10cSrcweir SvtGraphicFill* pSvtGraphicFill = 0; 1752cdf0e10cSrcweir 1753cdf0e10cSrcweir if(!mnSvtGraphicFillCount && aLocalPolyPolygon.count()) 1754cdf0e10cSrcweir { 1755cdf0e10cSrcweir // setup simple color with transparence fill stuff like in impgrfll 1756cdf0e10cSrcweir pSvtGraphicFill = new SvtGraphicFill( 1757cdf0e10cSrcweir PolyPolygon(aLocalPolyPolygon), 1758cdf0e10cSrcweir Color(aPolygonColor), 1759cdf0e10cSrcweir rUniTransparenceCandidate.getTransparence(), 1760cdf0e10cSrcweir SvtGraphicFill::fillEvenOdd, 1761cdf0e10cSrcweir SvtGraphicFill::fillSolid, 1762cdf0e10cSrcweir SvtGraphicFill::Transform(), 1763cdf0e10cSrcweir false, 1764cdf0e10cSrcweir SvtGraphicFill::hatchSingle, 1765cdf0e10cSrcweir Color(), 1766cdf0e10cSrcweir SvtGraphicFill::gradientLinear, 1767cdf0e10cSrcweir Color(), 1768cdf0e10cSrcweir Color(), 1769cdf0e10cSrcweir 0, 1770cdf0e10cSrcweir Graphic()); 1771cdf0e10cSrcweir } 1772cdf0e10cSrcweir 1773cdf0e10cSrcweir // set line and fill color 1774cdf0e10cSrcweir const sal_uInt16 nTransPercentVcl((sal_uInt16)basegfx::fround(rUniTransparenceCandidate.getTransparence() * 100.0)); 1775cdf0e10cSrcweir mpOutputDevice->SetFillColor(Color(aPolygonColor)); 1776cdf0e10cSrcweir mpOutputDevice->SetLineColor(); 1777cdf0e10cSrcweir 1778cdf0e10cSrcweir // call VCL directly; encapsulate with SvtGraphicFill 1779cdf0e10cSrcweir impStartSvtGraphicFill(pSvtGraphicFill); 1780cdf0e10cSrcweir mpOutputDevice->DrawTransparent( 1781cdf0e10cSrcweir PolyPolygon(aLocalPolyPolygon), 1782cdf0e10cSrcweir nTransPercentVcl); 1783cdf0e10cSrcweir impEndSvtGraphicFill(pSvtGraphicFill); 1784cdf0e10cSrcweir } 1785cdf0e10cSrcweir else 1786cdf0e10cSrcweir { 1787cdf0e10cSrcweir // svae old mfCurrentUnifiedTransparence and set new one 1788cdf0e10cSrcweir // so that contained SvtGraphicStroke may use the current one 1789cdf0e10cSrcweir const double fLastCurrentUnifiedTransparence(mfCurrentUnifiedTransparence); 1790cdf0e10cSrcweir // #i105377# paint the content metafile opaque as the transparency gets 1791cdf0e10cSrcweir // split of into the gradient below 1792cdf0e10cSrcweir // mfCurrentUnifiedTransparence = rUniTransparenceCandidate.getTransparence(); 1793cdf0e10cSrcweir mfCurrentUnifiedTransparence = 0; 1794cdf0e10cSrcweir 1795cdf0e10cSrcweir // various content, create content-metafile 1796cdf0e10cSrcweir GDIMetaFile aContentMetafile; 1797cdf0e10cSrcweir const Rectangle aPrimitiveRectangle(impDumpToMetaFile(rContent, aContentMetafile)); 1798cdf0e10cSrcweir 1799cdf0e10cSrcweir // restore mfCurrentUnifiedTransparence; it may have been used 1800cdf0e10cSrcweir // while processing the sub-content in impDumpToMetaFile 1801cdf0e10cSrcweir mfCurrentUnifiedTransparence = fLastCurrentUnifiedTransparence; 1802cdf0e10cSrcweir 1803cdf0e10cSrcweir // create uniform VCL gradient for uniform transparency 1804cdf0e10cSrcweir Gradient aVCLGradient; 1805cdf0e10cSrcweir const sal_uInt8 nTransPercentVcl((sal_uInt8)basegfx::fround(rUniTransparenceCandidate.getTransparence() * 255.0)); 1806cdf0e10cSrcweir const Color aTransColor(nTransPercentVcl, nTransPercentVcl, nTransPercentVcl); 1807cdf0e10cSrcweir 1808cdf0e10cSrcweir aVCLGradient.SetStyle(GRADIENT_LINEAR); 1809cdf0e10cSrcweir aVCLGradient.SetStartColor(aTransColor); 1810cdf0e10cSrcweir aVCLGradient.SetEndColor(aTransColor); 1811cdf0e10cSrcweir aVCLGradient.SetAngle(0); 1812cdf0e10cSrcweir aVCLGradient.SetBorder(0); 1813cdf0e10cSrcweir aVCLGradient.SetOfsX(0); 1814cdf0e10cSrcweir aVCLGradient.SetOfsY(0); 1815cdf0e10cSrcweir aVCLGradient.SetStartIntensity(100); 1816cdf0e10cSrcweir aVCLGradient.SetEndIntensity(100); 1817cdf0e10cSrcweir aVCLGradient.SetSteps(2); 1818cdf0e10cSrcweir 1819cdf0e10cSrcweir // render it to VCL 1820cdf0e10cSrcweir mpOutputDevice->DrawTransparent( 1821cdf0e10cSrcweir aContentMetafile, aPrimitiveRectangle.TopLeft(), 1822cdf0e10cSrcweir aPrimitiveRectangle.GetSize(), aVCLGradient); 1823cdf0e10cSrcweir } 1824cdf0e10cSrcweir } 1825cdf0e10cSrcweir } 1826cdf0e10cSrcweir 1827cdf0e10cSrcweir break; 1828cdf0e10cSrcweir } 1829cdf0e10cSrcweir case PRIMITIVE2D_ID_TRANSPARENCEPRIMITIVE2D : 1830cdf0e10cSrcweir { 1831cdf0e10cSrcweir // for metafile: Need to examine what the pure vcl version is doing here actually 1832cdf0e10cSrcweir // - uses DrawTransparent with metafile for content and a gradient 1833cdf0e10cSrcweir // i can detect this here with checking the gradient part for a single 1834cdf0e10cSrcweir // FillGradientPrimitive2D and reconstruct the gradient. 1835cdf0e10cSrcweir // If that detection goes wrong, i have to create an transparence-blended bitmap. Eventually 1836cdf0e10cSrcweir // do that in stripes, else RenderTransparencePrimitive2D may just be used 1837cdf0e10cSrcweir const primitive2d::TransparencePrimitive2D& rTransparenceCandidate = static_cast< const primitive2d::TransparencePrimitive2D& >(rCandidate); 1838cdf0e10cSrcweir const primitive2d::Primitive2DSequence rContent = rTransparenceCandidate.getChildren(); 1839cdf0e10cSrcweir const primitive2d::Primitive2DSequence rTransparence = rTransparenceCandidate.getTransparence(); 1840cdf0e10cSrcweir 1841cdf0e10cSrcweir if(rContent.hasElements() && rTransparence.hasElements()) 1842cdf0e10cSrcweir { 1843cdf0e10cSrcweir // try to identify a single FillGradientPrimitive2D in the 1844cdf0e10cSrcweir // transparence part of the primitive 1845cdf0e10cSrcweir const primitive2d::FillGradientPrimitive2D* pFiGradient = 0; 1846cdf0e10cSrcweir static bool bForceToBigTransparentVDev(false); 1847cdf0e10cSrcweir 1848cdf0e10cSrcweir if(!bForceToBigTransparentVDev && 1 == rTransparence.getLength()) 1849cdf0e10cSrcweir { 1850cdf0e10cSrcweir const primitive2d::Primitive2DReference xReference(rTransparence[0]); 1851cdf0e10cSrcweir pFiGradient = dynamic_cast< const primitive2d::FillGradientPrimitive2D* >(xReference.get()); 1852cdf0e10cSrcweir } 1853cdf0e10cSrcweir 1854cdf0e10cSrcweir // Check also for correct ID to exclude derived implementations 1855cdf0e10cSrcweir if(pFiGradient && PRIMITIVE2D_ID_FILLGRADIENTPRIMITIVE2D == pFiGradient->getPrimitive2DID()) 1856cdf0e10cSrcweir { 1857cdf0e10cSrcweir // various content, create content-metafile 1858cdf0e10cSrcweir GDIMetaFile aContentMetafile; 1859cdf0e10cSrcweir const Rectangle aPrimitiveRectangle(impDumpToMetaFile(rContent, aContentMetafile)); 1860cdf0e10cSrcweir 1861cdf0e10cSrcweir // re-create a VCL-gradient from FillGradientPrimitive2D 1862cdf0e10cSrcweir Gradient aVCLGradient; 1863cdf0e10cSrcweir impConvertFillGradientAttributeToVCLGradient(aVCLGradient, pFiGradient->getFillGradient(), true); 1864cdf0e10cSrcweir 1865cdf0e10cSrcweir // render it to VCL 1866cdf0e10cSrcweir mpOutputDevice->DrawTransparent( 1867cdf0e10cSrcweir aContentMetafile, aPrimitiveRectangle.TopLeft(), 1868cdf0e10cSrcweir aPrimitiveRectangle.GetSize(), aVCLGradient); 1869cdf0e10cSrcweir } 1870cdf0e10cSrcweir else 1871cdf0e10cSrcweir { 1872cdf0e10cSrcweir // sub-transparence group. Draw to VDev first. 1873cdf0e10cSrcweir // this may get refined to tiling when resolution is too big here 1874cdf0e10cSrcweir 1875cdf0e10cSrcweir // need to avoid switching off MapMode stuff here; maybe need another 1876cdf0e10cSrcweir // tooling class, cannot just do the same as with the pixel renderer. 1877cdf0e10cSrcweir // Need to experiment... 1878cdf0e10cSrcweir 1879cdf0e10cSrcweir // Okay, basic implementation finished and tested. The DPI stuff was hard 1880cdf0e10cSrcweir // and not easy to find out that it's needed. 1881cdf0e10cSrcweir // Since this will not yet happen normally (as long as noone constructs 1882cdf0e10cSrcweir // transparence primitives with non-trivial transparence content) i will for now not 1883cdf0e10cSrcweir // refine to tiling here. 1884cdf0e10cSrcweir 1885cdf0e10cSrcweir basegfx::B2DRange aViewRange(primitive2d::getB2DRangeFromPrimitive2DSequence(rContent, getViewInformation2D())); 1886cdf0e10cSrcweir aViewRange.transform(maCurrentTransformation); 1887cdf0e10cSrcweir const Rectangle aRectLogic( 1888cdf0e10cSrcweir (sal_Int32)floor(aViewRange.getMinX()), (sal_Int32)floor(aViewRange.getMinY()), 1889cdf0e10cSrcweir (sal_Int32)ceil(aViewRange.getMaxX()), (sal_Int32)ceil(aViewRange.getMaxY())); 1890cdf0e10cSrcweir const Rectangle aRectPixel(mpOutputDevice->LogicToPixel(aRectLogic)); 1891cdf0e10cSrcweir const Size aSizePixel(aRectPixel.GetSize()); 1892cdf0e10cSrcweir const Point aEmptyPoint; 1893cdf0e10cSrcweir VirtualDevice aBufferDevice; 1894cdf0e10cSrcweir 1895cdf0e10cSrcweir if(aBufferDevice.SetOutputSizePixel(aSizePixel)) 1896cdf0e10cSrcweir { 1897cdf0e10cSrcweir // create and set MapModes for target devices 1898cdf0e10cSrcweir MapMode aNewMapMode(mpOutputDevice->GetMapMode()); 1899cdf0e10cSrcweir aNewMapMode.SetOrigin(Point(-aRectLogic.Left(), -aRectLogic.Top())); 1900cdf0e10cSrcweir aBufferDevice.SetMapMode(aNewMapMode); 1901cdf0e10cSrcweir 1902cdf0e10cSrcweir // prepare view transformation for target renderers 1903cdf0e10cSrcweir // ATTENTION! Need to apply another scaling because of the potential DPI differences 1904cdf0e10cSrcweir // between Printer and VDev (mpOutputDevice and aBufferDevice here). 1905cdf0e10cSrcweir // To get the DPI, LogicToPixel from (1,1) from MAP_INCH needs to be used. 1906cdf0e10cSrcweir basegfx::B2DHomMatrix aViewTransform(aBufferDevice.GetViewTransformation()); 1907cdf0e10cSrcweir const Size aDPIOld(mpOutputDevice->LogicToPixel(Size(1, 1), MAP_INCH)); 1908cdf0e10cSrcweir const Size aDPINew(aBufferDevice.LogicToPixel(Size(1, 1), MAP_INCH)); 1909cdf0e10cSrcweir const double fDPIXChange((double)aDPIOld.getWidth() / (double)aDPINew.getWidth()); 1910cdf0e10cSrcweir const double fDPIYChange((double)aDPIOld.getHeight() / (double)aDPINew.getHeight()); 1911cdf0e10cSrcweir 1912cdf0e10cSrcweir if(!basegfx::fTools::equal(fDPIXChange, 1.0) || !basegfx::fTools::equal(fDPIYChange, 1.0)) 1913cdf0e10cSrcweir { 1914cdf0e10cSrcweir aViewTransform.scale(fDPIXChange, fDPIYChange); 1915cdf0e10cSrcweir } 1916cdf0e10cSrcweir 1917cdf0e10cSrcweir // create view information and pixel renderer. Reuse known ViewInformation 1918cdf0e10cSrcweir // except new transformation and range 1919cdf0e10cSrcweir const geometry::ViewInformation2D aViewInfo( 1920cdf0e10cSrcweir getViewInformation2D().getObjectTransformation(), 1921cdf0e10cSrcweir aViewTransform, 1922cdf0e10cSrcweir aViewRange, 1923cdf0e10cSrcweir getViewInformation2D().getVisualizedPage(), 1924cdf0e10cSrcweir getViewInformation2D().getViewTime(), 1925cdf0e10cSrcweir getViewInformation2D().getExtendedInformationSequence()); 1926cdf0e10cSrcweir 1927cdf0e10cSrcweir VclPixelProcessor2D aBufferProcessor(aViewInfo, aBufferDevice); 1928cdf0e10cSrcweir 1929cdf0e10cSrcweir // draw content using pixel renderer 1930cdf0e10cSrcweir aBufferProcessor.process(rContent); 1931cdf0e10cSrcweir const Bitmap aBmContent(aBufferDevice.GetBitmap(aEmptyPoint, aSizePixel)); 1932cdf0e10cSrcweir 1933cdf0e10cSrcweir // draw transparence using pixel renderer 1934cdf0e10cSrcweir aBufferDevice.Erase(); 1935cdf0e10cSrcweir aBufferProcessor.process(rTransparence); 1936cdf0e10cSrcweir const AlphaMask aBmAlpha(aBufferDevice.GetBitmap(aEmptyPoint, aSizePixel)); 1937cdf0e10cSrcweir 1938cdf0e10cSrcweir #ifdef DBG_UTIL 1939cdf0e10cSrcweir static bool bDoSaveForVisualControl(false); 1940cdf0e10cSrcweir if(bDoSaveForVisualControl) 1941cdf0e10cSrcweir { 1942cdf0e10cSrcweir SvFileStream aNew(String(ByteString( "c:\\test.bmp" ), RTL_TEXTENCODING_UTF8), STREAM_WRITE|STREAM_TRUNC); 1943cdf0e10cSrcweir aNew << aBmContent; 1944cdf0e10cSrcweir } 1945cdf0e10cSrcweir #endif 1946cdf0e10cSrcweir 1947cdf0e10cSrcweir // paint 1948cdf0e10cSrcweir mpOutputDevice->DrawBitmapEx( 1949cdf0e10cSrcweir aRectLogic.TopLeft(), 1950cdf0e10cSrcweir aRectLogic.GetSize(), 1951cdf0e10cSrcweir BitmapEx(aBmContent, aBmAlpha)); 1952cdf0e10cSrcweir } 1953cdf0e10cSrcweir } 1954cdf0e10cSrcweir } 1955cdf0e10cSrcweir 1956cdf0e10cSrcweir break; 1957cdf0e10cSrcweir } 1958cdf0e10cSrcweir case PRIMITIVE2D_ID_TRANSFORMPRIMITIVE2D : 1959cdf0e10cSrcweir { 1960cdf0e10cSrcweir // use default transform group pocessing 1961cdf0e10cSrcweir RenderTransformPrimitive2D(static_cast< const primitive2d::TransformPrimitive2D& >(rCandidate)); 1962cdf0e10cSrcweir break; 1963cdf0e10cSrcweir } 1964cdf0e10cSrcweir case PRIMITIVE2D_ID_PAGEPREVIEWPRIMITIVE2D : 1965cdf0e10cSrcweir { 1966cdf0e10cSrcweir // new XDrawPage for ViewInformation2D 1967cdf0e10cSrcweir RenderPagePreviewPrimitive2D(static_cast< const primitive2d::PagePreviewPrimitive2D& >(rCandidate)); 1968cdf0e10cSrcweir break; 1969cdf0e10cSrcweir } 1970cdf0e10cSrcweir case PRIMITIVE2D_ID_MARKERARRAYPRIMITIVE2D : 1971cdf0e10cSrcweir { 1972cdf0e10cSrcweir // use default marker array pocessing 1973cdf0e10cSrcweir RenderMarkerArrayPrimitive2D(static_cast< const primitive2d::MarkerArrayPrimitive2D& >(rCandidate)); 1974cdf0e10cSrcweir break; 1975cdf0e10cSrcweir } 1976cdf0e10cSrcweir case PRIMITIVE2D_ID_POINTARRAYPRIMITIVE2D : 1977cdf0e10cSrcweir { 1978cdf0e10cSrcweir // use default point array pocessing 1979cdf0e10cSrcweir RenderPointArrayPrimitive2D(static_cast< const primitive2d::PointArrayPrimitive2D& >(rCandidate)); 1980cdf0e10cSrcweir break; 1981cdf0e10cSrcweir } 1982cdf0e10cSrcweir case PRIMITIVE2D_ID_CHARTPRIMITIVE2D : 1983cdf0e10cSrcweir { 1984cdf0e10cSrcweir // ChartPrimitive2D 1985cdf0e10cSrcweir const primitive2d::ChartPrimitive2D& rChartPrimitive = static_cast< const primitive2d::ChartPrimitive2D& >(rCandidate); 1986cdf0e10cSrcweir 1987cdf0e10cSrcweir if(!renderChartPrimitive2D( 1988cdf0e10cSrcweir rChartPrimitive, 1989cdf0e10cSrcweir *mpOutputDevice, 1990cdf0e10cSrcweir getViewInformation2D())) 1991cdf0e10cSrcweir { 1992cdf0e10cSrcweir // fallback to decomposition (MetaFile) 1993cdf0e10cSrcweir process(rChartPrimitive.get2DDecomposition(getViewInformation2D())); 1994cdf0e10cSrcweir } 1995cdf0e10cSrcweir break; 1996cdf0e10cSrcweir } 1997cdf0e10cSrcweir case PRIMITIVE2D_ID_STRUCTURETAGPRIMITIVE2D : 1998cdf0e10cSrcweir { 1999cdf0e10cSrcweir // structured tag primitive 2000cdf0e10cSrcweir const primitive2d::StructureTagPrimitive2D& rStructureTagCandidate = static_cast< const primitive2d::StructureTagPrimitive2D& >(rCandidate); 2001cdf0e10cSrcweir const vcl::PDFWriter::StructElement& rTagElement(rStructureTagCandidate.getStructureElement()); 2002cdf0e10cSrcweir const bool bTagUsed(vcl::PDFWriter::NonStructElement != rTagElement); 2003cdf0e10cSrcweir 2004cdf0e10cSrcweir if(mpPDFExtOutDevData && bTagUsed) 2005cdf0e10cSrcweir { 2006cdf0e10cSrcweir // write start tag 2007cdf0e10cSrcweir mpPDFExtOutDevData->BeginStructureElement(rTagElement); 2008cdf0e10cSrcweir } 2009cdf0e10cSrcweir 2010cdf0e10cSrcweir // proccess childs normally 2011cdf0e10cSrcweir process(rStructureTagCandidate.getChildren()); 2012cdf0e10cSrcweir 2013cdf0e10cSrcweir if(mpPDFExtOutDevData && bTagUsed) 2014cdf0e10cSrcweir { 2015cdf0e10cSrcweir // write end tag 2016cdf0e10cSrcweir mpPDFExtOutDevData->EndStructureElement(); 2017cdf0e10cSrcweir } 2018cdf0e10cSrcweir 2019cdf0e10cSrcweir break; 2020cdf0e10cSrcweir } 2021cdf0e10cSrcweir case PRIMITIVE2D_ID_EPSPRIMITIVE2D : 2022cdf0e10cSrcweir { 2023cdf0e10cSrcweir RenderEpsPrimitive2D(static_cast< const primitive2d::EpsPrimitive2D& >(rCandidate)); 2024cdf0e10cSrcweir break; 2025cdf0e10cSrcweir } 2026cdf0e10cSrcweir default : 2027cdf0e10cSrcweir { 2028cdf0e10cSrcweir // process recursively 2029cdf0e10cSrcweir process(rCandidate.get2DDecomposition(getViewInformation2D())); 2030cdf0e10cSrcweir break; 2031cdf0e10cSrcweir } 2032cdf0e10cSrcweir } 2033cdf0e10cSrcweir } 2034cdf0e10cSrcweir } // end of namespace processor2d 2035cdf0e10cSrcweir } // end of namespace drawinglayer 2036cdf0e10cSrcweir 2037cdf0e10cSrcweir ////////////////////////////////////////////////////////////////////////////// 2038cdf0e10cSrcweir // eof 2039