1 /**************************************************************
2 *
3 * Licensed to the Apache Software Foundation (ASF) under one
4 * or more contributor license agreements. See the NOTICE file
5 * distributed with this work for additional information
6 * regarding copyright ownership. The ASF licenses this file
7 * to you under the Apache License, Version 2.0 (the
8 * "License"); you may not use this file except in compliance
9 * with the License. You may obtain a copy of the License at
10 *
11 * http://www.apache.org/licenses/LICENSE-2.0
12 *
13 * Unless required by applicable law or agreed to in writing,
14 * software distributed under the License is distributed on an
15 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
16 * KIND, either express or implied. See the License for the
17 * specific language governing permissions and limitations
18 * under the License.
19 *
20 *************************************************************/
21
22
23
24 // MARKER(update_precomp.py): autogen include statement, do not remove
25 #include "precompiled_sw.hxx"
26
27
28 #include <hintids.hxx>
29
30 #include <com/sun/star/i18n/ScriptType.hdl>
31 #include <editeng/twolinesitem.hxx>
32 #include <editeng/charrotateitem.hxx>
33 #include <vcl/outdev.hxx>
34 #include <fmtfld.hxx>
35 #include <fldbas.hxx> // SwField
36 #include <txatbase.hxx>
37 #include <fmtruby.hxx> // SwFmtRuby
38 #include <txtatr.hxx> // SwTxtRuby
39 #include <charfmt.hxx>
40 #include <txtinet.hxx>
41 #include <fchrfmt.hxx>
42 #include <layfrm.hxx> // GetUpper()
43 #include <SwPortionHandler.hxx>
44 #include <pormulti.hxx> // SwMultiPortion
45 #include <inftxt.hxx> // SwTxtSizeInfo
46 #include <itrpaint.hxx> // SwTxtPainter
47 #include <viewopt.hxx> // SwViewOptions
48 #include <itrform2.hxx> // SwTxtFormatter
49 #include <porfld.hxx> // SwFldPortion
50 #include <porglue.hxx>
51 #include <breakit.hxx>
52 #include <pagefrm.hxx>
53 #include <rowfrm.hxx>
54 #include <pagedesc.hxx> // SwPageDesc
55 #include <tgrditem.hxx>
56 #include <swtable.hxx>
57 #include <fmtfsize.hxx>
58
59 using namespace ::com::sun::star;
60 extern sal_Bool IsUnderlineBreak( const SwLinePortion& rPor, const SwFont& rFnt );
61
62 /*-----------------10.10.00 15:23-------------------
63 * class SwMultiPortion
64 *
65 * A SwMultiPortion is not a simple portion,
66 * it's a container, which contains almost a SwLineLayoutPortion.
67 * This SwLineLayout could be followed by other textportions via pPortion
68 * and by another SwLineLayout via pNext to realize a doubleline portion.
69 * --------------------------------------------------*/
70
~SwMultiPortion()71 SwMultiPortion::~SwMultiPortion()
72 {
73 delete pFldRest;
74 }
75
Paint(const SwTxtPaintInfo &) const76 void SwMultiPortion::Paint( const SwTxtPaintInfo & ) const
77 {
78 ASSERT( sal_False,
79 "Don't try SwMultiPortion::Paint, try SwTxtPainter::PaintMultiPortion" );
80 }
81
82 /*-----------------13.10.00 16:21-------------------
83 * Summarize the internal lines to calculate the (external) size.
84 * The internal line has to calculate first.
85 * --------------------------------------------------*/
86
CalcSize(SwTxtFormatter & rLine,SwTxtFormatInfo & rInf)87 void SwMultiPortion::CalcSize( SwTxtFormatter& rLine, SwTxtFormatInfo &rInf )
88 {
89 Width( 0 );
90 Height( 0 );
91 SetAscent( 0 );
92 SetFlyInCntnt( sal_False );
93 SwLineLayout *pLay = &GetRoot();
94 do
95 {
96 pLay->CalcLine( rLine, rInf );
97 if( rLine.IsFlyInCntBase() )
98 SetFlyInCntnt( sal_True );
99 if( IsRuby() && ( OnTop() == ( pLay == &GetRoot() ) ) )
100 {
101 // An empty phonetic line doesn't need an ascent or a height.
102 if( !pLay->Width() )
103 {
104 pLay->SetAscent( 0 );
105 pLay->Height( 0 );
106 }
107 if( OnTop() )
108 SetAscent( GetAscent() + pLay->Height() );
109 }
110 else
111 SetAscent( GetAscent() + pLay->GetAscent() );
112 Height( Height() + pLay->Height() );
113 if( Width() < pLay->Width() )
114 Width( pLay->Width() );
115 pLay = pLay->GetNext();
116 } while ( pLay );
117 if( HasBrackets() )
118 {
119 KSHORT nTmp = ((SwDoubleLinePortion*)this)->GetBrackets()->nHeight;
120 if( nTmp > Height() )
121 {
122 KSHORT nAdd = ( nTmp - Height() ) / 2;
123 GetRoot().SetAscent( GetRoot().GetAscent() + nAdd );
124 GetRoot().Height( GetRoot().Height() + nAdd );
125 Height( nTmp );
126 }
127 nTmp = ((SwDoubleLinePortion*)this)->GetBrackets()->nAscent;
128 if( nTmp > GetAscent() )
129 SetAscent( nTmp );
130 }
131 }
132
CalcSpacing(long,const SwTxtSizeInfo &) const133 long SwMultiPortion::CalcSpacing( long , const SwTxtSizeInfo & ) const
134 {
135 return 0;
136 }
137
ChgSpaceAdd(SwLineLayout *,long) const138 sal_Bool SwMultiPortion::ChgSpaceAdd( SwLineLayout*, long ) const
139 {
140 return sal_False;
141 }
142
143 /*************************************************************************
144 * virtual SwMultiPortion::HandlePortion()
145 *************************************************************************/
146
HandlePortion(SwPortionHandler & rPH) const147 void SwMultiPortion::HandlePortion( SwPortionHandler& rPH ) const
148 {
149 rPH.Text( GetLen(), GetWhichPor() );
150 }
151
152 /*-----------------01.11.00 14:21-------------------
153 * SwMultiPortion::ActualizeTabulator()
154 * sets the tabulator-flag, if there's any tabulator-portion inside.
155 * --------------------------------------------------*/
156
ActualizeTabulator()157 void SwMultiPortion::ActualizeTabulator()
158 {
159 SwLinePortion* pPor = GetRoot().GetFirstPortion();
160 // First line
161 for( bTab1 = bTab2 = sal_False; pPor; pPor = pPor->GetPortion() )
162 if( pPor->InTabGrp() )
163 SetTab1( sal_True );
164 if( GetRoot().GetNext() )
165 {
166 // Second line
167 pPor = GetRoot().GetNext()->GetFirstPortion();
168 do
169 {
170 if( pPor->InTabGrp() )
171 SetTab2( sal_True );
172 pPor = pPor->GetPortion();
173 } while ( pPor );
174 }
175 }
176
177 /*-----------------16.02.01 12:07-------------------
178 * SwRotatedPortion::SwRotatedPortion(..)
179 * --------------------------------------------------*/
180
SwRotatedPortion(const SwMultiCreator & rCreate,xub_StrLen nEnd,sal_Bool bRTL)181 SwRotatedPortion::SwRotatedPortion( const SwMultiCreator& rCreate,
182 xub_StrLen nEnd, sal_Bool bRTL ) : SwMultiPortion( nEnd )
183 {
184 const SvxCharRotateItem* pRot = (SvxCharRotateItem*)rCreate.pItem;
185 if( !pRot )
186 {
187 const SwTxtAttr& rAttr = *rCreate.pAttr;
188 const SfxPoolItem *const pItem =
189 CharFmt::GetItem(rAttr, RES_CHRATR_ROTATE);
190 if ( pItem )
191 {
192 pRot = static_cast<const SvxCharRotateItem*>(pItem);
193 }
194 }
195 if( pRot )
196 {
197 sal_uInt8 nDir;
198 if ( bRTL )
199 nDir = pRot->IsBottomToTop() ? 3 : 1;
200 else
201 nDir = pRot->IsBottomToTop() ? 1 : 3;
202
203 SetDirection( nDir );
204 }
205 }
206
207 /*---------------------------------------------------
208 * SwBidiPortion::SwBidiPortion(..)
209 * --------------------------------------------------*/
210
SwBidiPortion(xub_StrLen nEnd,sal_uInt8 nLv)211 SwBidiPortion::SwBidiPortion( xub_StrLen nEnd, sal_uInt8 nLv )
212 : SwMultiPortion( nEnd ), nLevel( nLv )
213 {
214 SetBidi();
215
216 if ( nLevel % 2 )
217 SetDirection( DIR_RIGHT2LEFT );
218 else
219 SetDirection( DIR_LEFT2RIGHT );
220 }
221
222
CalcSpacing(long nSpaceAdd,const SwTxtSizeInfo & rInf) const223 long SwBidiPortion::CalcSpacing( long nSpaceAdd, const SwTxtSizeInfo& rInf ) const
224 {
225 return HasTabulator() ? 0 : GetSpaceCnt(rInf) * nSpaceAdd / SPACING_PRECISION_FACTOR;
226 }
227
ChgSpaceAdd(SwLineLayout * pCurr,long nSpaceAdd) const228 sal_Bool SwBidiPortion::ChgSpaceAdd( SwLineLayout* pCurr, long nSpaceAdd ) const
229 {
230 sal_Bool bRet = sal_False;
231 if( !HasTabulator() && nSpaceAdd > 0 && !pCurr->IsSpaceAdd() )
232 {
233 pCurr->CreateSpaceAdd();
234 pCurr->SetLLSpaceAdd( nSpaceAdd, 0 );
235 bRet = sal_True;
236 }
237
238 return bRet;
239 }
240
GetSpaceCnt(const SwTxtSizeInfo & rInf) const241 xub_StrLen SwBidiPortion::GetSpaceCnt( const SwTxtSizeInfo &rInf ) const
242 {
243 // Calculate number of blanks for justified alignment
244 SwLinePortion* pPor = GetRoot().GetFirstPortion();
245 xub_StrLen nTmpStart = rInf.GetIdx();
246 xub_StrLen nNull = 0;
247 xub_StrLen nBlanks;
248
249 for( nBlanks = 0; pPor; pPor = pPor->GetPortion() )
250 {
251 if( pPor->InTxtGrp() )
252 nBlanks = nBlanks + ((SwTxtPortion*)pPor)->GetSpaceCnt( rInf, nNull );
253 else if ( pPor->IsMultiPortion() &&
254 ((SwMultiPortion*)pPor)->IsBidi() )
255 nBlanks = nBlanks + ((SwBidiPortion*)pPor)->GetSpaceCnt( rInf );
256
257 ((SwTxtSizeInfo &)rInf).SetIdx( rInf.GetIdx() + pPor->GetLen() );
258 }
259 ((SwTxtSizeInfo &)rInf).SetIdx( nTmpStart );
260 return nBlanks;
261 }
262
263 /*-----------------01.11.00 14:22-------------------
264 * SwDoubleLinePortion::SwDoubleLinePortion(..)
265 * This constructor is for the continuation of a doubleline portion
266 * in the next line.
267 * It takes the same brackets and if the original has no content except
268 * brackets, these will be deleted.
269 * --------------------------------------------------*/
270
SwDoubleLinePortion(SwDoubleLinePortion & rDouble,xub_StrLen nEnd)271 SwDoubleLinePortion::SwDoubleLinePortion( SwDoubleLinePortion& rDouble,
272 xub_StrLen nEnd ) :
273 SwMultiPortion( nEnd ),
274 pBracket( 0 )
275 {
276 SetDirection( rDouble.GetDirection() );
277 SetDouble();
278 if( rDouble.GetBrackets() )
279 {
280 SetBrackets( rDouble );
281 // An empty multiportion needs no brackets.
282 // Notice: GetLen() might be zero, if the multiportion contains
283 // the second part of a field and the width might be zero, if
284 // it contains a note only. In this cases the brackets are okay.
285 // But if the length and the width are both zero, the portion
286 // is really empty.
287 if( rDouble.Width() == rDouble.BracketWidth() )
288 rDouble.ClearBrackets();
289 }
290 }
291
292 /*-----------------01.11.00 14:22-------------------
293 * SwDoubleLinePortion::SwDoubleLinePortion(..)
294 * This constructor uses the textattribut to get the right brackets.
295 * The textattribut could be a 2-line-attribute or a character- or
296 * internetstyle, which contains the 2-line-attribute.
297 * --------------------------------------------------*/
298
SwDoubleLinePortion(const SwMultiCreator & rCreate,xub_StrLen nEnd)299 SwDoubleLinePortion::SwDoubleLinePortion( const SwMultiCreator& rCreate,
300 xub_StrLen nEnd ) : SwMultiPortion( nEnd ), pBracket( new SwBracket() )
301 {
302 SetDouble();
303 const SvxTwoLinesItem* pTwo = (SvxTwoLinesItem*)rCreate.pItem;
304 if( pTwo )
305 pBracket->nStart = 0;
306 else
307 {
308 const SwTxtAttr& rAttr = *rCreate.pAttr;
309 pBracket->nStart = *rAttr.GetStart();
310
311 const SfxPoolItem * const pItem =
312 CharFmt::GetItem( rAttr, RES_CHRATR_TWO_LINES );
313 if ( pItem )
314 {
315 pTwo = static_cast<const SvxTwoLinesItem*>(pItem);
316 }
317 }
318 if( pTwo )
319 {
320 pBracket->cPre = pTwo->GetStartBracket();
321 pBracket->cPost = pTwo->GetEndBracket();
322 }
323 else
324 {
325 pBracket->cPre = 0;
326 pBracket->cPost = 0;
327 }
328 sal_uInt8 nTmp = SW_SCRIPTS;
329 if( pBracket->cPre > 255 )
330 {
331 String aTxt( pBracket->cPre );
332 nTmp = SwScriptInfo::WhichFont( 0, &aTxt, 0 );
333 }
334 pBracket->nPreScript = nTmp;
335 nTmp = SW_SCRIPTS;
336 if( pBracket->cPost > 255 )
337 {
338 String aTxt( pBracket->cPost );
339 nTmp = SwScriptInfo::WhichFont( 0, &aTxt, 0 );
340 }
341 pBracket->nPostScript = nTmp;
342
343 if( !pBracket->cPre && !pBracket->cPost )
344 {
345 delete pBracket;
346 pBracket = 0;
347 }
348
349 // double line portions have the same direction as the frame directions
350 if ( rCreate.nLevel % 2 )
351 SetDirection( DIR_RIGHT2LEFT );
352 else
353 SetDirection( DIR_LEFT2RIGHT );
354 }
355
356
357 /*-----------------25.10.00 09:51-------------------
358 * SwMultiPortion::PaintBracket paints the wished bracket,
359 * if the multiportion has surrounding brackets.
360 * The X-position of the SwTxtPaintInfo will be modified:
361 * the open bracket sets position behind itself,
362 * the close bracket in front of itself.
363 * --------------------------------------------------*/
364
PaintBracket(SwTxtPaintInfo & rInf,long nSpaceAdd,sal_Bool bOpen) const365 void SwDoubleLinePortion::PaintBracket( SwTxtPaintInfo &rInf,
366 long nSpaceAdd,
367 sal_Bool bOpen ) const
368 {
369 sal_Unicode cCh = bOpen ? pBracket->cPre : pBracket->cPost;
370 if( !cCh )
371 return;
372 KSHORT nChWidth = bOpen ? PreWidth() : PostWidth();
373 if( !nChWidth )
374 return;
375 if( !bOpen )
376 rInf.X( rInf.X() + Width() - PostWidth() +
377 ( nSpaceAdd > 0 ? CalcSpacing( nSpaceAdd, rInf ) : 0 ) );
378
379 SwBlankPortion aBlank( cCh, sal_True );
380 aBlank.SetAscent( pBracket->nAscent );
381 aBlank.Width( nChWidth );
382 aBlank.Height( pBracket->nHeight );
383 {
384 SwFont* pTmpFnt = new SwFont( *rInf.GetFont() );
385 sal_uInt8 nAct = bOpen ? pBracket->nPreScript : pBracket->nPostScript;
386 if( SW_SCRIPTS > nAct )
387 pTmpFnt->SetActual( nAct );
388 pTmpFnt->SetProportion( 100 );
389 SwFontSave aSave( rInf, pTmpFnt );
390 aBlank.Paint( rInf );
391 delete pTmpFnt;
392 }
393 if( bOpen )
394 rInf.X( rInf.X() + PreWidth() );
395 }
396
397 /*-----------------25.10.00 16:26-------------------
398 * SwDoubleLinePortion::SetBrackets creates the bracket-structure
399 * and fills it, if not both characters are 0x00.
400 * --------------------------------------------------*/
401
SetBrackets(const SwDoubleLinePortion & rDouble)402 void SwDoubleLinePortion::SetBrackets( const SwDoubleLinePortion& rDouble )
403 {
404 if( rDouble.pBracket )
405 {
406 pBracket = new SwBracket;
407 pBracket->cPre = rDouble.pBracket->cPre;
408 pBracket->cPost = rDouble.pBracket->cPost;
409 pBracket->nPreScript = rDouble.pBracket->nPreScript;
410 pBracket->nPostScript = rDouble.pBracket->nPostScript;
411 pBracket->nStart = rDouble.pBracket->nStart;
412 }
413 }
414
415 /*-----------------25.10.00 16:29-------------------
416 * SwDoubleLinePortion::FormatBrackets
417 * calculates the size of the brackets => pBracket,
418 * reduces the nMaxWidth-parameter ( minus bracket-width )
419 * and moves the rInf-x-position behind the opening bracket.
420 * --------------------------------------------------*/
421
FormatBrackets(SwTxtFormatInfo & rInf,SwTwips & nMaxWidth)422 void SwDoubleLinePortion::FormatBrackets( SwTxtFormatInfo &rInf, SwTwips& nMaxWidth )
423 {
424 nMaxWidth -= rInf.X();
425 SwFont* pTmpFnt = new SwFont( *rInf.GetFont() );
426 pTmpFnt->SetProportion( 100 );
427 pBracket->nAscent = 0;
428 pBracket->nHeight = 0;
429 if( pBracket->cPre )
430 {
431 String aStr( pBracket->cPre );
432 sal_uInt8 nActualScr = pTmpFnt->GetActual();
433 if( SW_SCRIPTS > pBracket->nPreScript )
434 pTmpFnt->SetActual( pBracket->nPreScript );
435 SwFontSave aSave( rInf, pTmpFnt );
436 SwPosSize aSize = rInf.GetTxtSize( aStr );
437 pBracket->nAscent = rInf.GetAscent();
438 pBracket->nHeight = aSize.Height();
439 pTmpFnt->SetActual( nActualScr );
440 if( nMaxWidth > aSize.Width() )
441 {
442 pBracket->nPreWidth = aSize.Width();
443 nMaxWidth -= aSize.Width();
444 rInf.X( rInf.X() + aSize.Width() );
445 }
446 else
447 {
448 pBracket->nPreWidth = 0;
449 nMaxWidth = 0;
450 }
451 }
452 else
453 pBracket->nPreWidth = 0;
454 if( pBracket->cPost )
455 {
456 String aStr( pBracket->cPost );
457 if( SW_SCRIPTS > pBracket->nPostScript )
458 pTmpFnt->SetActual( pBracket->nPostScript );
459 SwFontSave aSave( rInf, pTmpFnt );
460 SwPosSize aSize = rInf.GetTxtSize( aStr );
461 KSHORT nTmpAsc = rInf.GetAscent();
462 if( nTmpAsc > pBracket->nAscent )
463 {
464 pBracket->nHeight += nTmpAsc - pBracket->nAscent;
465 pBracket->nAscent = nTmpAsc;
466 }
467 if( aSize.Height() > pBracket->nHeight )
468 pBracket->nHeight = aSize.Height();
469 if( nMaxWidth > aSize.Width() )
470 {
471 pBracket->nPostWidth = aSize.Width();
472 nMaxWidth -= aSize.Width();
473 }
474 else
475 {
476 pBracket->nPostWidth = 0;
477 nMaxWidth = 0;
478 }
479 }
480 else
481 pBracket->nPostWidth = 0;
482 nMaxWidth += rInf.X();
483 }
484
485 /*-----------------26.10.00 10:36-------------------
486 * SwDoubleLinePortion::CalcBlanks
487 * calculates the number of blanks in each line and
488 * the difference of the width of the two lines.
489 * These results are used from the text adjustment.
490 * --------------------------------------------------*/
491
CalcBlanks(SwTxtFormatInfo & rInf)492 void SwDoubleLinePortion::CalcBlanks( SwTxtFormatInfo &rInf )
493 {
494 SwLinePortion* pPor = GetRoot().GetFirstPortion();
495 xub_StrLen nNull = 0;
496 xub_StrLen nStart = rInf.GetIdx();
497 SetTab1( sal_False );
498 SetTab2( sal_False );
499 for( nBlank1 = 0; pPor; pPor = pPor->GetPortion() )
500 {
501 if( pPor->InTxtGrp() )
502 nBlank1 = nBlank1 + ((SwTxtPortion*)pPor)->GetSpaceCnt( rInf, nNull );
503 rInf.SetIdx( rInf.GetIdx() + pPor->GetLen() );
504 if( pPor->InTabGrp() )
505 SetTab1( sal_True );
506 }
507 nLineDiff = GetRoot().Width();
508 if( GetRoot().GetNext() )
509 {
510 pPor = GetRoot().GetNext()->GetFirstPortion();
511 nLineDiff -= GetRoot().GetNext()->Width();
512 }
513 for( nBlank2 = 0; pPor; pPor = pPor->GetPortion() )
514 {
515 if( pPor->InTxtGrp() )
516 nBlank2 = nBlank2 + ((SwTxtPortion*)pPor)->GetSpaceCnt( rInf, nNull );
517 rInf.SetIdx( rInf.GetIdx() + pPor->GetLen() );
518 if( pPor->InTabGrp() )
519 SetTab2( sal_True );
520 }
521 rInf.SetIdx( nStart );
522 }
523
CalcSpacing(long nSpaceAdd,const SwTxtSizeInfo &) const524 long SwDoubleLinePortion::CalcSpacing( long nSpaceAdd, const SwTxtSizeInfo & ) const
525 {
526 return HasTabulator() ? 0 : GetSpaceCnt() * nSpaceAdd / SPACING_PRECISION_FACTOR;
527 }
528
529 /*-----------------01.11.00 14:29-------------------
530 * SwDoubleLinePortion::ChangeSpaceAdd(..)
531 * merges the spaces for text adjustment from the inner and outer part.
532 * Inside the doubleline portion the wider line has no spaceadd-array, the
533 * smaller line has such an array to reach width of the wider line.
534 * If the surrounding line has text adjustment and the doubleline portion
535 * contains no tabulator, it is necessary to create/manipulate the inner
536 * space arrays.
537 * --------------------------------------------------*/
538
ChgSpaceAdd(SwLineLayout * pCurr,long nSpaceAdd) const539 sal_Bool SwDoubleLinePortion::ChgSpaceAdd( SwLineLayout* pCurr,
540 long nSpaceAdd ) const
541 {
542 sal_Bool bRet = sal_False;
543 if( !HasTabulator() && nSpaceAdd > 0 )
544 {
545 if( !pCurr->IsSpaceAdd() )
546 {
547 // The wider line gets the spaceadd from the surrounding line direct
548 pCurr->CreateSpaceAdd();
549 pCurr->SetLLSpaceAdd( nSpaceAdd, 0 );
550 bRet = sal_True;
551 }
552 else
553 {
554 xub_StrLen nMyBlank = GetSmallerSpaceCnt();
555 xub_StrLen nOther = GetSpaceCnt();
556 SwTwips nMultiSpace = pCurr->GetLLSpaceAdd( 0 ) * nMyBlank + nOther * nSpaceAdd;
557
558 if( nMyBlank )
559 nMultiSpace /= nMyBlank;
560
561 if( nMultiSpace < KSHRT_MAX * SPACING_PRECISION_FACTOR )
562 {
563 // pCurr->SetLLSpaceAdd( nMultiSpace, 0 );
564 // --> FME 2006-07-11 #i65711# SetLLSpaceAdd replaces the first value,
565 // instead we want to insert a new first value:
566 std::vector<long>* pVec = pCurr->GetpLLSpaceAdd();
567 pVec->insert( pVec->begin(), nMultiSpace );
568 // <--
569 bRet = sal_True;
570 }
571 }
572 }
573 return bRet;
574 }
575 /*-----------------01.11.00 14:29-------------------
576 * SwDoubleLinePortion::ResetSpaceAdd(..)
577 * cancels the manipulation from SwDoubleLinePortion::ChangeSpaceAdd(..)
578 * --------------------------------------------------*/
579
ResetSpaceAdd(SwLineLayout * pCurr)580 void SwDoubleLinePortion::ResetSpaceAdd( SwLineLayout* pCurr )
581 {
582 pCurr->RemoveFirstLLSpaceAdd();;
583 if( !pCurr->GetLLSpaceAddCount() )
584 pCurr->FinishSpaceAdd();
585 }
586
~SwDoubleLinePortion()587 SwDoubleLinePortion::~SwDoubleLinePortion()
588 {
589 delete pBracket;
590 }
591
592 /*-----------------13.11.00 14:50-------------------
593 * SwRubyPortion::SwRubyPortion(..)
594 * constructs a ruby portion, i.e. an additional text is displayed
595 * beside the main text, e.g. phonetic characters.
596 * --------------------------------------------------*/
597
598
SwRubyPortion(const SwRubyPortion & rRuby,xub_StrLen nEnd)599 SwRubyPortion::SwRubyPortion( const SwRubyPortion& rRuby, xub_StrLen nEnd ) :
600 SwMultiPortion( nEnd ),
601 nRubyOffset( rRuby.GetRubyOffset() ),
602 nAdjustment( rRuby.GetAdjustment() )
603 {
604 SetDirection( rRuby.GetDirection() ),
605 SetTop( rRuby.OnTop() );
606 SetRuby();
607 }
608
609 /*-----------------13.11.00 14:50-------------------
610 * SwRubyPortion::SwRubyPortion(..)
611 * constructs a ruby portion, i.e. an additional text is displayed
612 * beside the main text, e.g. phonetic characters.
613 * --------------------------------------------------*/
614
SwRubyPortion(const SwMultiCreator & rCreate,const SwFont & rFnt,const IDocumentSettingAccess & rIDocumentSettingAccess,xub_StrLen nEnd,xub_StrLen nOffs,const sal_Bool * pForceRubyPos)615 SwRubyPortion::SwRubyPortion( const SwMultiCreator& rCreate, const SwFont& rFnt,
616 const IDocumentSettingAccess& rIDocumentSettingAccess,
617 xub_StrLen nEnd, xub_StrLen nOffs,
618 const sal_Bool* pForceRubyPos )
619 : SwMultiPortion( nEnd )
620 {
621 SetRuby();
622 ASSERT( SW_MC_RUBY == rCreate.nId, "Ruby expected" );
623 ASSERT( RES_TXTATR_CJK_RUBY == rCreate.pAttr->Which(), "Wrong attribute" );
624 const SwFmtRuby& rRuby = rCreate.pAttr->GetRuby();
625 nAdjustment = rRuby.GetAdjustment();
626 nRubyOffset = nOffs;
627
628 // in grid mode we force the ruby text to the upper or lower line
629 if ( pForceRubyPos )
630 SetTop( *pForceRubyPos );
631 else
632 SetTop( ! rRuby.GetPosition() );
633
634 const SwCharFmt* pFmt = ((SwTxtRuby*)rCreate.pAttr)->GetCharFmt();
635 SwFont *pRubyFont;
636 if( pFmt )
637 {
638 const SwAttrSet& rSet = pFmt->GetAttrSet();
639 pRubyFont = new SwFont( rFnt );
640 pRubyFont->SetDiffFnt( &rSet, &rIDocumentSettingAccess );
641
642 // we do not allow a vertical font for the ruby text
643 pRubyFont->SetVertical( rFnt.GetOrientation() );
644 }
645 else
646 pRubyFont = NULL;
647
648 String aStr( rRuby.GetText(), nOffs, STRING_LEN );
649 SwFldPortion *pFld = new SwFldPortion( aStr, pRubyFont );
650 pFld->SetNextOffset( nOffs );
651 pFld->SetFollow( sal_True );
652
653 if( OnTop() )
654 GetRoot().SetPortion( pFld );
655 else
656 {
657 GetRoot().SetNext( new SwLineLayout() );
658 GetRoot().GetNext()->SetPortion( pFld );
659 }
660
661 // ruby portions have the same direction as the frame directions
662 if ( rCreate.nLevel % 2 )
663 {
664 // switch right and left ruby adjustment in rtl environment
665 if ( 0 == nAdjustment )
666 nAdjustment = 2;
667 else if ( 2 == nAdjustment )
668 nAdjustment = 0;
669
670 SetDirection( DIR_RIGHT2LEFT );
671 }
672 else
673 SetDirection( DIR_LEFT2RIGHT );
674 }
675
676 /*-----------------13.11.00 14:56-------------------
677 * SwRubyPortion::_Adjust(..)
678 * In ruby portion there are different alignments for
679 * the ruby text and the main text.
680 * Left, right, centered and two possibilities of block adjustment
681 * The block adjustment is realized by spacing between the characters,
682 * either with a half space or no space in front of the first letter and
683 * a half space at the end of the last letter.
684 * Notice: the smaller line will be manipulated, normally it's the ruby line,
685 * but it could be the main text, too.
686 * If there is a tabulator in smaller line, no adjustment is possible.
687 * --------------------------------------------------*/
688
_Adjust(SwTxtFormatInfo & rInf)689 void SwRubyPortion::_Adjust( SwTxtFormatInfo &rInf )
690 {
691 SwTwips nLineDiff = GetRoot().Width() - GetRoot().GetNext()->Width();
692 xub_StrLen nOldIdx = rInf.GetIdx();
693 if( !nLineDiff )
694 return;
695 SwLineLayout *pCurr;
696 if( nLineDiff < 0 )
697 { // The first line has to be adjusted.
698 if( GetTab1() )
699 return;
700 pCurr = &GetRoot();
701 nLineDiff = -nLineDiff;
702 }
703 else
704 { // The second line has to be adjusted.
705 if( GetTab2() )
706 return;
707 pCurr = GetRoot().GetNext();
708 rInf.SetIdx( nOldIdx + GetRoot().GetLen() );
709 }
710 KSHORT nLeft = 0; // the space in front of the first letter
711 KSHORT nRight = 0; // the space at the end of the last letter
712 sal_uInt16 nSub = 0;
713 switch ( nAdjustment )
714 {
715 case 1: nRight = static_cast<sal_uInt16>(nLineDiff / 2); // no break
716 case 2: nLeft = static_cast<sal_uInt16>(nLineDiff - nRight); break;
717 case 3: nSub = 1; // no break
718 case 4:
719 {
720 xub_StrLen nCharCnt = 0;
721 SwLinePortion *pPor;
722 for( pPor = pCurr->GetFirstPortion(); pPor; pPor = pPor->GetPortion() )
723 {
724 if( pPor->InTxtGrp() )
725 ((SwTxtPortion*)pPor)->GetSpaceCnt( rInf, nCharCnt );
726 rInf.SetIdx( rInf.GetIdx() + pPor->GetLen() );
727 }
728 if( nCharCnt > nSub )
729 {
730 SwTwips nCalc = nLineDiff / ( nCharCnt - nSub );
731 short nTmp;
732 if( nCalc < SHRT_MAX )
733 nTmp = -short(nCalc);
734 else
735 nTmp = SHRT_MIN;
736
737 pCurr->CreateSpaceAdd( SPACING_PRECISION_FACTOR * nTmp );
738 nLineDiff -= nCalc * ( nCharCnt - 1 );
739 }
740 if( nLineDiff > 1 )
741 {
742 nRight = static_cast<sal_uInt16>(nLineDiff / 2);
743 nLeft = static_cast<sal_uInt16>(nLineDiff - nRight);
744 }
745 break;
746 }
747 default: ASSERT( sal_False, "New ruby adjustment" );
748 }
749 if( nLeft || nRight )
750 {
751 if( !pCurr->GetPortion() )
752 pCurr->SetPortion( new SwTxtPortion( *pCurr ) );
753 SwMarginPortion *pMarg = new SwMarginPortion( 0 );
754 if( nLeft )
755 {
756 pMarg->AddPrtWidth( nLeft );
757 pMarg->SetPortion( pCurr->GetPortion() );
758 pCurr->SetPortion( pMarg );
759 }
760 if( nRight )
761 {
762 pMarg = new SwMarginPortion( 0 );
763 pMarg->AddPrtWidth( nRight );
764 pCurr->FindLastPortion()->Append( pMarg );
765 }
766 }
767
768 pCurr->Width( Width() );
769 rInf.SetIdx( nOldIdx );
770 }
771
772 /*-----------------08.11.00 14:14-------------------
773 * CalcRubyOffset()
774 * has to change the nRubyOffset, if there's a fieldportion
775 * in the phonetic line.
776 * The nRubyOffset is the position in the rubystring, where the
777 * next SwRubyPortion has start the displaying of the phonetics.
778 * --------------------------------------------------*/
779
CalcRubyOffset()780 void SwRubyPortion::CalcRubyOffset()
781 {
782 const SwLineLayout *pCurr = &GetRoot();
783 if( !OnTop() )
784 {
785 pCurr = pCurr->GetNext();
786 if( !pCurr )
787 return;
788 }
789 const SwLinePortion *pPor = pCurr->GetFirstPortion();
790 const SwFldPortion *pFld = NULL;
791 while( pPor )
792 {
793 if( pPor->InFldGrp() )
794 pFld = (SwFldPortion*)pPor;
795 pPor = pPor->GetPortion();
796 }
797 if( pFld )
798 {
799 if( pFld->HasFollow() )
800 nRubyOffset = pFld->GetNextOffset();
801 else
802 nRubyOffset = STRING_LEN;
803 }
804 }
805
806 /*-----------------13.10.00 16:22-------------------
807 * SwTxtSizeInfo::GetMultiCreator(..)
808 * If we (e.g. the position rPos) are inside a two-line-attribute or
809 * a ruby-attribute, the attribute will be returned in a SwMultiCreator-struct,
810 * otherwise the function returns zero.
811 * The rPos parameter is set to the end of the multiportion,
812 * normally this is the end of the attribute,
813 * but sometimes it is the start of another attribute, which finished or
814 * interrupts the first attribute.
815 * E.g. a ruby portion interrupts a 2-line-attribute, a 2-line-attribute
816 * with different brackets interrupts another 2-line-attribute.
817 * --------------------------------------------------*/
818
819 /*-----------------13.11.00 15:38-------------------
820 * lcl_Has2Lines(..)
821 * is a little help function for GetMultiCreator(..)
822 * It extracts the 2-line-format from a 2-line-attribute or a character style.
823 * The rValue is set to sal_True, if the 2-line-attribute's value is set and
824 * no 2-line-format reference is passed. If there is a 2-line-format reference,
825 * then the rValue is set only, if the 2-line-attribute's value is set _and_
826 * the 2-line-formats has the same brackets.
827 * --------------------------------------------------*/
828
lcl_Has2Lines(const SwTxtAttr & rAttr,const SvxTwoLinesItem * & rpRef,sal_Bool & rValue)829 sal_Bool lcl_Has2Lines( const SwTxtAttr& rAttr, const SvxTwoLinesItem* &rpRef,
830 sal_Bool &rValue )
831 {
832 const SfxPoolItem* pItem = CharFmt::GetItem( rAttr, RES_CHRATR_TWO_LINES );
833 if( pItem )
834 {
835 rValue = ((SvxTwoLinesItem*)pItem)->GetValue();
836 if( !rpRef )
837 rpRef = (SvxTwoLinesItem*)pItem;
838 else if( ((SvxTwoLinesItem*)pItem)->GetEndBracket() !=
839 rpRef->GetEndBracket() ||
840 ((SvxTwoLinesItem*)pItem)->GetStartBracket() !=
841 rpRef->GetStartBracket() )
842 rValue = sal_False;
843 return sal_True;
844 }
845 return sal_False;
846 }
847
848 /*-----------------16.02.01 16:39-------------------
849 * lcl_HasRotation(..)
850 * is a little help function for GetMultiCreator(..)
851 * It extracts the charrotation from a charrotate-attribute or a character style.
852 * The rValue is set to sal_True, if the charrotate-attribute's value is set and
853 * no charrotate-format reference is passed.
854 * If there is a charrotate-format reference, then the rValue is set only,
855 * if the charrotate-attribute's value is set _and_ identical
856 * to the charrotate-format's value.
857 * --------------------------------------------------*/
858
lcl_HasRotation(const SwTxtAttr & rAttr,const SvxCharRotateItem * & rpRef,sal_Bool & rValue)859 sal_Bool lcl_HasRotation( const SwTxtAttr& rAttr,
860 const SvxCharRotateItem* &rpRef, sal_Bool &rValue )
861 {
862 const SfxPoolItem* pItem = CharFmt::GetItem( rAttr, RES_CHRATR_ROTATE );
863 if ( pItem )
864 {
865 rValue = 0 != ((SvxCharRotateItem*)pItem)->GetValue();
866 if( !rpRef )
867 rpRef = (SvxCharRotateItem*)pItem;
868 else if( ((SvxCharRotateItem*)pItem)->GetValue() !=
869 rpRef->GetValue() )
870 rValue = sal_False;
871 return sal_True;
872 }
873
874 return sal_False;
875 }
876
GetMultiCreator(xub_StrLen & rPos,SwMultiPortion * pMulti) const877 SwMultiCreator* SwTxtSizeInfo::GetMultiCreator( xub_StrLen &rPos,
878 SwMultiPortion* pMulti ) const
879 {
880 SwScriptInfo& rSI = ((SwParaPortion*)GetParaPortion())->GetScriptInfo();
881
882 // get the last embedding level
883 sal_uInt8 nCurrLevel;
884 if ( pMulti )
885 {
886 ASSERT( pMulti->IsBidi(), "Nested MultiPortion is not BidiPortion" )
887 // level associated with bidi-portion;
888 nCurrLevel = ((SwBidiPortion*)pMulti)->GetLevel();
889 }
890 else
891 // no nested bidi portion required
892 nCurrLevel = GetTxtFrm()->IsRightToLeft() ? 1 : 0;
893
894 // check if there is a field at rPos:
895 sal_uInt8 nNextLevel = nCurrLevel;
896 sal_Bool bFldBidi = sal_False;
897
898 if ( CH_TXTATR_BREAKWORD == GetChar( rPos ) )
899 {
900 bFldBidi = sal_True;
901 /*
902 // examining the script of the field text should be sufficient
903 // for 99% of all cases
904 XubString aTxt = GetTxtFrm()->GetTxtNode()->GetExpandTxt( rPos, 1 );
905
906 if ( pBreakIt->GetBreakIter().is() && aTxt.Len() )
907 {
908 sal_Bool bFldDir = ( i18n::ScriptType::COMPLEX ==
909 pBreakIt->GetRealScriptOfText( aTxt, 0 ) );
910 sal_Bool bCurrDir = ( 0 != ( nCurrLevel % 2 ) );
911 if ( bFldDir != bCurrDir )
912 {
913 nNextLevel = nCurrLevel + 1;
914 bFldBidi = sal_True;
915 }
916 }*/
917 }
918 else
919 nNextLevel = rSI.DirType( rPos );
920
921 if ( GetTxt().Len() != rPos && nNextLevel > nCurrLevel )
922 {
923 rPos = bFldBidi ? rPos + 1 : rSI.NextDirChg( rPos, &nCurrLevel );
924 if ( STRING_LEN == rPos )
925 return NULL;
926 SwMultiCreator *pRet = new SwMultiCreator;
927 pRet->pItem = NULL;
928 pRet->pAttr = NULL;
929 pRet->nId = SW_MC_BIDI;
930 pRet->nLevel = nCurrLevel + 1;
931 return pRet;
932 }
933
934 // a bidi portion can only contain other bidi portions
935 if ( pMulti )
936 return NULL;
937
938 const SvxCharRotateItem* pRotate = NULL;
939 const SfxPoolItem* pRotItem;
940 if( SFX_ITEM_SET == pFrm->GetTxtNode()->GetSwAttrSet().
941 GetItemState( RES_CHRATR_ROTATE, sal_True, &pRotItem ) &&
942 ((SvxCharRotateItem*)pRotItem)->GetValue() )
943 pRotate = (SvxCharRotateItem*)pRotItem;
944 else
945 pRotItem = NULL;
946 const SvxTwoLinesItem* p2Lines = NULL;
947 const SfxPoolItem* pItem;
948 if( SFX_ITEM_SET == pFrm->GetTxtNode()->GetSwAttrSet().
949 GetItemState( RES_CHRATR_TWO_LINES, sal_True, &pItem ) &&
950 ((SvxTwoLinesItem*)pItem)->GetValue() )
951 p2Lines = (SvxTwoLinesItem*)pItem;
952 else
953 pItem = NULL;
954
955 const SwpHints *pHints = pFrm->GetTxtNode()->GetpSwpHints();
956 if( !pHints && !p2Lines && !pRotate )
957 return NULL;
958 const SwTxtAttr *pRuby = NULL;
959 sal_Bool bTwo = sal_False;
960 sal_Bool bRot = sal_False;
961 sal_uInt16 n2Lines = USHRT_MAX;
962 sal_uInt16 nRotate = USHRT_MAX;
963 sal_uInt16 nCount = pHints ? pHints->Count() : 0;
964 sal_uInt16 i;
965 for( i = 0; i < nCount; ++i )
966 {
967 const SwTxtAttr *pTmp = (*pHints)[i];
968 xub_StrLen nStart = *pTmp->GetStart();
969 if( rPos < nStart )
970 break;
971 if( *pTmp->GetAnyEnd() > rPos )
972 {
973 if( RES_TXTATR_CJK_RUBY == pTmp->Which() )
974 pRuby = pTmp;
975 else
976 {
977 const SvxCharRotateItem* pRoTmp = NULL;
978 if( lcl_HasRotation( *pTmp, pRoTmp, bRot ) )
979 {
980 nRotate = bRot ? i : nCount;
981 pRotate = pRoTmp;
982 }
983 const SvxTwoLinesItem* p2Tmp = NULL;
984 if( lcl_Has2Lines( *pTmp, p2Tmp, bTwo ) )
985 {
986 n2Lines = bTwo ? i : nCount;
987 p2Lines = p2Tmp;
988 }
989 }
990 }
991 }
992 if( pRuby )
993 { // The winner is ... a ruby attribute and so
994 // the end of the multiportion is the end of the ruby attribute.
995 rPos = *pRuby->End();
996 SwMultiCreator *pRet = new SwMultiCreator;
997 pRet->pItem = NULL;
998 pRet->pAttr = pRuby;
999 pRet->nId = SW_MC_RUBY;
1000 pRet->nLevel = GetTxtFrm()->IsRightToLeft() ? 1 : 0;
1001 return pRet;
1002 }
1003 if( n2Lines < nCount || ( pItem && pItem == p2Lines &&
1004 rPos < GetTxt().Len() ) )
1005 { // The winner is a 2-line-attribute,
1006 // the end of the multiportion depends on the following attributes...
1007 SwMultiCreator *pRet = new SwMultiCreator;
1008
1009 // We note the endpositions of the 2-line attributes in aEnd as stack
1010 SvXub_StrLens aEnd;
1011
1012 // The bOn flag signs the state of the last 2-line attribute in the
1013 // aEnd-stack, it is compatible with the winner-attribute or
1014 // it interrupts the other attribute.
1015 sal_Bool bOn = sal_True;
1016
1017 if( n2Lines < nCount )
1018 {
1019 pRet->pItem = NULL;
1020 pRet->pAttr = (*pHints)[n2Lines];
1021 aEnd.push_front( *pRet->pAttr->End() );
1022 if( pItem )
1023 {
1024 aEnd.front() = GetTxt().Len();
1025 bOn = ((SvxTwoLinesItem*)pItem)->GetEndBracket() ==
1026 p2Lines->GetEndBracket() &&
1027 ((SvxTwoLinesItem*)pItem)->GetStartBracket() ==
1028 p2Lines->GetStartBracket();
1029 }
1030 }
1031 else
1032 {
1033 pRet->pItem = pItem;
1034 pRet->pAttr = NULL;
1035 aEnd.push_front( GetTxt().Len() );
1036 }
1037 pRet->nId = SW_MC_DOUBLE;
1038 pRet->nLevel = GetTxtFrm()->IsRightToLeft() ? 1 : 0;
1039
1040 // n2Lines is the index of the last 2-line-attribute, which contains
1041 // the actual position.
1042 i = 0;
1043 // At this moment we know that at position rPos the "winner"-attribute
1044 // causes a 2-line-portion. The end of the attribute is the end of the
1045 // portion, if there's no interrupting attribute.
1046 // There are two kinds of interruptors:
1047 // - ruby attributes stops the 2-line-attribute, the end of the
1048 // multiline is the start of the ruby attribute
1049 // - 2-line-attributes with value "Off" or with different brackets,
1050 // these attributes may interrupt the winner, but they could be
1051 // neutralized by another 2-line-attribute starting at the same
1052 // position with the same brackets as the winner-attribute.
1053
1054 // In the following loop rPos is the critical position and it will be
1055 // evaluated, if at rPos starts a interrupting or a maintaining
1056 // continuity attribute.
1057 while( i < nCount )
1058 {
1059 const SwTxtAttr *pTmp = (*pHints)[i++];
1060 if( *pTmp->GetAnyEnd() <= rPos )
1061 continue;
1062 if( rPos < *pTmp->GetStart() )
1063 {
1064 // If bOn is sal_False and the next attribute starts later than rPos
1065 // the winner attribute is interrupted at rPos.
1066 // If the start of the next attribute is behind the end of
1067 // the last attribute on the aEnd-stack, this is the endposition
1068 // on the stack is the end of the 2-line portion.
1069 if( !bOn || aEnd.back() < *pTmp->GetStart() )
1070 break;
1071 // At this moment, bOn is sal_True and the next attribute starts
1072 // behind rPos, so we could move rPos to the next startpoint
1073 rPos = *pTmp->GetStart();
1074 // We clean up the aEnd-stack, endpositions equal to rPos are
1075 // superfluous.
1076 while( !aEnd.empty() && aEnd.back() <= rPos )
1077 {
1078 bOn = !bOn;
1079 aEnd.pop_back();
1080 }
1081 // If the endstack is empty, we simulate an attribute with
1082 // state sal_True and endposition rPos
1083 if( aEnd.empty() )
1084 {
1085 aEnd.push_front( rPos );
1086 bOn = sal_True;
1087 }
1088 }
1089 // A ruby attribute stops the 2-line immediately
1090 if( RES_TXTATR_CJK_RUBY == pTmp->Which() )
1091 return pRet;
1092 if( lcl_Has2Lines( *pTmp, p2Lines, bTwo ) )
1093 { // We have an interesting attribute..
1094 if( bTwo == bOn )
1095 { // ...with the same state, so the last attribute could
1096 // be continued.
1097 if( aEnd.back() < *pTmp->End() )
1098 aEnd.back() = *pTmp->End();
1099 }
1100 else
1101 { // ...with a different state.
1102 bOn = bTwo;
1103 // If this is smaller than the last on the stack, we put
1104 // it on the stack. If it has the same endposition, the last
1105 // could be removed.
1106 if( aEnd.back() > *pTmp->End() )
1107 aEnd.push_back( *pTmp->End() );
1108 else if( aEnd.size() > 1 )
1109 aEnd.pop_back();
1110 else
1111 aEnd.back() = *pTmp->End();
1112 }
1113 }
1114 }
1115 if( bOn && !aEnd.empty() )
1116 rPos = aEnd.back();
1117 return pRet;
1118 }
1119 if( nRotate < nCount || ( pRotItem && pRotItem == pRotate &&
1120 rPos < GetTxt().Len() ) )
1121 { // The winner is a rotate-attribute,
1122 // the end of the multiportion depends on the following attributes...
1123 SwMultiCreator *pRet = new SwMultiCreator;
1124 pRet->nId = SW_MC_ROTATE;
1125
1126 // We note the endpositions of the 2-line attributes in aEnd as stack
1127 SvXub_StrLens aEnd;
1128
1129 // The bOn flag signs the state of the last 2-line attribute in the
1130 // aEnd-stack, which could interrupts the winning rotation attribute.
1131 sal_Bool bOn = pItem ? sal_True : sal_False;
1132 aEnd.push_front( GetTxt().Len() );
1133 // n2Lines is the index of the last 2-line-attribute, which contains
1134 // the actual position.
1135 i = 0;
1136 xub_StrLen n2Start = rPos;
1137 while( i < nCount )
1138 {
1139 const SwTxtAttr *pTmp = (*pHints)[i++];
1140 if( *pTmp->GetAnyEnd() <= n2Start )
1141 continue;
1142 if( n2Start < *pTmp->GetStart() )
1143 {
1144 if( bOn || aEnd.back() < *pTmp->GetStart() )
1145 break;
1146 n2Start = *pTmp->GetStart();
1147 while( !aEnd.empty() && aEnd.back() <= n2Start )
1148 {
1149 bOn = !bOn;
1150 aEnd.pop_back();
1151 }
1152 if( aEnd.empty() )
1153 {
1154 aEnd.push_front( n2Start );
1155 bOn = sal_False;
1156 }
1157 }
1158 // A ruby attribute stops immediately
1159 if( RES_TXTATR_CJK_RUBY == pTmp->Which() )
1160 {
1161 bOn = sal_True;
1162 break;
1163 }
1164 p2Lines = NULL;
1165 if( lcl_Has2Lines( *pTmp, p2Lines, bTwo ) )
1166 {
1167 if( bTwo == bOn )
1168 {
1169 if( aEnd.back() < *pTmp->End() )
1170 aEnd.back() = *pTmp->End();
1171 }
1172 else
1173 {
1174 bOn = bTwo;
1175 if( aEnd.back() > *pTmp->End() )
1176 aEnd.push_back( *pTmp->End() );
1177 else if( aEnd.size() > 1 )
1178 aEnd.pop_back();
1179 else
1180 aEnd.back() = *pTmp->End();
1181 }
1182 }
1183 }
1184 if( !bOn && !aEnd.empty() )
1185 n2Start = aEnd.back();
1186
1187 if( !aEnd.empty() )
1188 aEnd.clear();
1189
1190 bOn = sal_True;
1191 if( nRotate < nCount )
1192 {
1193 pRet->pItem = NULL;
1194 pRet->pAttr = (*pHints)[nRotate];
1195 aEnd.push_front( *pRet->pAttr->End() );
1196 if( pRotItem )
1197 {
1198 aEnd.front() = GetTxt().Len();
1199 bOn = ((SvxCharRotateItem*)pRotItem)->GetValue() ==
1200 pRotate->GetValue();
1201 }
1202 }
1203 else
1204 {
1205 pRet->pItem = pRotItem;
1206 pRet->pAttr = NULL;
1207 aEnd.push_front( GetTxt().Len() );
1208 }
1209 i = 0;
1210 while( i < nCount )
1211 {
1212 const SwTxtAttr *pTmp = (*pHints)[i++];
1213 if( *pTmp->GetAnyEnd() <= rPos )
1214 continue;
1215 if( rPos < *pTmp->GetStart() )
1216 {
1217 if( !bOn || aEnd.back() < *pTmp->GetStart() )
1218 break;
1219 rPos = *pTmp->GetStart();
1220 while( !aEnd.empty() && aEnd.back() <= rPos )
1221 {
1222 bOn = !bOn;
1223 aEnd.pop_back();
1224 }
1225 if( aEnd.empty() )
1226 {
1227 aEnd.push_front( rPos );
1228 bOn = sal_True;
1229 }
1230 }
1231 if( RES_TXTATR_CJK_RUBY == pTmp->Which() )
1232 {
1233 bOn = sal_False;
1234 break;
1235 }
1236 if( lcl_HasRotation( *pTmp, pRotate, bTwo ) )
1237 {
1238 if( bTwo == bOn )
1239 {
1240 if( aEnd.back() < *pTmp->End() )
1241 aEnd.back() = *pTmp->End();
1242 }
1243 else
1244 {
1245 bOn = bTwo;
1246 if( aEnd.back() > *pTmp->End() )
1247 aEnd.push_back( *pTmp->End() );
1248 else if( aEnd.size() > 1 )
1249 aEnd.pop_back();
1250 else
1251 aEnd.back() = *pTmp->End();
1252 }
1253 }
1254 }
1255 if( bOn && !aEnd.empty() )
1256 rPos = aEnd.back();
1257 if( rPos > n2Start )
1258 rPos = n2Start;
1259 return pRet;
1260 }
1261 return NULL;
1262 }
1263
1264 /*-----------------01.11.00 14:52-------------------
1265 * SwSpaceManipulator
1266 * is a little helper class to manage the spaceadd-arrays of the text adjustment
1267 * during a PaintMultiPortion.
1268 * The constructor prepares the array for the first line of multiportion,
1269 * the SecondLine-function restores the values for the first line and prepares
1270 * the second line.
1271 * The destructor restores the values of the last manipulation.
1272 * --------------------------------------------------*/
1273
1274 class SwSpaceManipulator
1275 {
1276 SwTxtPaintInfo& rInfo;
1277 SwMultiPortion& rMulti;
1278 std::vector<long>* pOldSpaceAdd;
1279 MSHORT nOldSpIdx;
1280 long nSpaceAdd;
1281 sal_Bool bSpaceChg : 1;
1282 sal_uInt8 nOldDir : 2;
1283 public:
1284 SwSpaceManipulator( SwTxtPaintInfo& rInf, SwMultiPortion& rMult );
1285 ~SwSpaceManipulator();
1286 void SecondLine();
GetSpaceAdd() const1287 inline long GetSpaceAdd() const { return nSpaceAdd; }
1288 };
1289
SwSpaceManipulator(SwTxtPaintInfo & rInf,SwMultiPortion & rMult)1290 SwSpaceManipulator::SwSpaceManipulator( SwTxtPaintInfo& rInf,
1291 SwMultiPortion& rMult ) :
1292 rInfo( rInf ), rMulti( rMult )
1293 {
1294 pOldSpaceAdd = rInfo.GetpSpaceAdd();
1295 nOldSpIdx = rInfo.GetSpaceIdx();
1296 nOldDir = rInfo.GetDirection();
1297 rInfo.SetDirection( rMulti.GetDirection() );
1298 bSpaceChg = sal_False;
1299
1300 if( rMulti.IsDouble() )
1301 {
1302 nSpaceAdd = ( pOldSpaceAdd && !rMulti.HasTabulator() ) ?
1303 rInfo.GetSpaceAdd() : 0;
1304 if( rMulti.GetRoot().IsSpaceAdd() )
1305 {
1306 rInfo.SetpSpaceAdd( rMulti.GetRoot().GetpLLSpaceAdd() );
1307 rInfo.ResetSpaceIdx();
1308 bSpaceChg = rMulti.ChgSpaceAdd( &rMulti.GetRoot(), nSpaceAdd );
1309 }
1310 else if( rMulti.HasTabulator() )
1311 rInfo.SetpSpaceAdd( NULL );
1312 }
1313 else if ( ! rMulti.IsBidi() )
1314 {
1315 rInfo.SetpSpaceAdd( rMulti.GetRoot().GetpLLSpaceAdd() );
1316 rInfo.ResetSpaceIdx();
1317 }
1318 }
1319
SecondLine()1320 void SwSpaceManipulator::SecondLine()
1321 {
1322 if( bSpaceChg )
1323 {
1324 rInfo.RemoveFirstSpaceAdd();
1325 bSpaceChg = sal_False;
1326 }
1327 SwLineLayout *pLay = rMulti.GetRoot().GetNext();
1328 if( pLay->IsSpaceAdd() )
1329 {
1330 rInfo.SetpSpaceAdd( pLay->GetpLLSpaceAdd() );
1331 rInfo.ResetSpaceIdx();
1332 bSpaceChg = rMulti.ChgSpaceAdd( pLay, nSpaceAdd );
1333 }
1334 else
1335 {
1336 rInfo.SetpSpaceAdd( (!rMulti.IsDouble() || rMulti.HasTabulator() ) ?
1337 0 : pOldSpaceAdd );
1338 rInfo.SetSpaceIdx( nOldSpIdx);
1339 }
1340 }
1341
~SwSpaceManipulator()1342 SwSpaceManipulator::~SwSpaceManipulator()
1343 {
1344 if( bSpaceChg )
1345 {
1346 rInfo.RemoveFirstSpaceAdd();
1347 bSpaceChg = sal_False;
1348 }
1349 rInfo.SetpSpaceAdd( pOldSpaceAdd );
1350 rInfo.SetSpaceIdx( nOldSpIdx);
1351 rInfo.SetDirection( nOldDir );
1352 }
1353
1354 /*-----------------13.10.00 16:24-------------------
1355 * SwTxtPainter::PaintMultiPortion manages the paint for a SwMultiPortion.
1356 * External, for the calling function, it seems to be a normal Paint-function,
1357 * internal it is like a SwTxtFrm::Paint with multiple DrawTextLines
1358 * --------------------------------------------------*/
1359
PaintMultiPortion(const SwRect & rPaint,SwMultiPortion & rMulti,const SwMultiPortion * pEnvPor)1360 void SwTxtPainter::PaintMultiPortion( const SwRect &rPaint,
1361 SwMultiPortion& rMulti, const SwMultiPortion* pEnvPor )
1362 {
1363 GETGRID( pFrm->FindPageFrm() )
1364 const sal_Bool bHasGrid = pGrid && GetInfo().SnapToGrid();
1365 sal_uInt16 nGridWidth = 0;
1366 sal_uInt16 nRubyHeight = 0;
1367 sal_Bool bRubyTop = sal_False;
1368
1369 if ( bHasGrid )
1370 {
1371 nGridWidth = pGrid->GetBaseHeight();
1372 nRubyHeight = pGrid->GetRubyHeight();
1373 bRubyTop = ! pGrid->GetRubyTextBelow();
1374 }
1375
1376 // do not allow grid mode for first line in ruby portion
1377 const sal_Bool bRubyInGrid = bHasGrid && rMulti.IsRuby();
1378
1379 const sal_uInt16 nOldHeight = rMulti.Height();
1380 const sal_Bool bOldGridModeAllowed = GetInfo().SnapToGrid();
1381
1382 if ( bRubyInGrid )
1383 {
1384 GetInfo().SetSnapToGrid( ! bRubyTop );
1385 rMulti.Height( pCurr->Height() );
1386 }
1387
1388 SwLayoutModeModifier aLayoutModeModifier( *GetInfo().GetOut() );
1389 sal_uInt8 nEnvDir = 0;
1390 sal_uInt8 nThisDir = 0;
1391 sal_uInt8 nFrmDir = 0;
1392 if ( rMulti.IsBidi() )
1393 {
1394 // these values are needed for the calculation of the x coordinate
1395 // and the layout mode
1396 ASSERT( ! pEnvPor || pEnvPor->IsBidi(), "I expected a BidiPortion" )
1397 nFrmDir = GetInfo().GetTxtFrm()->IsRightToLeft() ? 1 : 0;
1398 nEnvDir = pEnvPor ? ((SwBidiPortion*)pEnvPor)->GetLevel() % 2 : nFrmDir;
1399 nThisDir = ((SwBidiPortion&)rMulti).GetLevel() % 2;
1400 }
1401
1402 #if OSL_DEBUG_LEVEL > 1
1403 // only paint first level bidi portions
1404 if( rMulti.Width() > 1 && ! pEnvPor )
1405 GetInfo().DrawViewOpt( rMulti, POR_FLD );
1406 #endif
1407
1408 if ( bRubyInGrid )
1409 rMulti.Height( nOldHeight );
1410
1411 // do we have to repaint a post it portion?
1412 if( GetInfo().OnWin() && rMulti.GetPortion() &&
1413 ! rMulti.GetPortion()->Width() )
1414 rMulti.GetPortion()->PrePaint( GetInfo(), &rMulti );
1415
1416 // old values must be saved and restored at the end
1417 xub_StrLen nOldLen = GetInfo().GetLen();
1418 KSHORT nOldX = KSHORT(GetInfo().X());
1419 long nOldY = GetInfo().Y();
1420 xub_StrLen nOldIdx = GetInfo().GetIdx();
1421
1422 SwSpaceManipulator aManip( GetInfo(), rMulti );
1423
1424 SwFontSave *pFontSave;
1425 SwFont* pTmpFnt;
1426
1427 if( rMulti.IsDouble() )
1428 {
1429 pTmpFnt = new SwFont( *GetInfo().GetFont() );
1430 if( rMulti.IsDouble() )
1431 {
1432 SetPropFont( 50 );
1433 pTmpFnt->SetProportion( GetPropFont() );
1434 }
1435 pFontSave = new SwFontSave( GetInfo(), pTmpFnt, this );
1436 }
1437 else
1438 {
1439 pFontSave = NULL;
1440 pTmpFnt = NULL;
1441 }
1442
1443 if( rMulti.HasBrackets() )
1444 {
1445 xub_StrLen nTmpOldIdx = GetInfo().GetIdx();
1446 GetInfo().SetIdx(((SwDoubleLinePortion&)rMulti).GetBrackets()->nStart);
1447 SeekAndChg( GetInfo() );
1448 ((SwDoubleLinePortion&)rMulti).PaintBracket( GetInfo(), 0, sal_True );
1449 GetInfo().SetIdx( nTmpOldIdx );
1450 }
1451
1452 KSHORT nTmpX = KSHORT(GetInfo().X());
1453
1454 SwLineLayout* pLay = &rMulti.GetRoot();// the first line of the multiportion
1455 SwLinePortion* pPor = pLay->GetFirstPortion();//first portion of these line
1456 SwTwips nOfst = 0;
1457
1458 // GetInfo().Y() is the baseline from the surrounding line. We must switch
1459 // this temporary to the baseline of the inner lines of the multiportion.
1460 if( rMulti.HasRotation() )
1461 {
1462 if( rMulti.IsRevers() )
1463 {
1464 GetInfo().Y( nOldY - rMulti.GetAscent() );
1465 nOfst = nTmpX + rMulti.Width();
1466 }
1467 else
1468 {
1469 GetInfo().Y( nOldY - rMulti.GetAscent() + rMulti.Height() );
1470 nOfst = nTmpX;
1471 }
1472 }
1473 else if ( rMulti.IsBidi() )
1474 {
1475 // does the current bidi portion has the same direction
1476 // as its environment?
1477 if ( nEnvDir != nThisDir )
1478 {
1479 // different directions, we have to adjust the x coordinate
1480 SwTwips nMultiWidth = rMulti.Width() +
1481 rMulti.CalcSpacing( GetInfo().GetSpaceAdd(), GetInfo() );
1482
1483 if ( nFrmDir == nThisDir )
1484 GetInfo().X( GetInfo().X() - nMultiWidth );
1485 else
1486 GetInfo().X( GetInfo().X() + nMultiWidth );
1487 }
1488
1489 nOfst = nOldY - rMulti.GetAscent();
1490
1491 // set layout mode
1492 aLayoutModeModifier.Modify( nThisDir );
1493 }
1494 else
1495 nOfst = nOldY - rMulti.GetAscent();
1496
1497 sal_Bool bRest = pLay->IsRest();
1498 sal_Bool bFirst = sal_True;
1499
1500 ASSERT( 0 == GetInfo().GetUnderFnt() || rMulti.IsBidi(),
1501 " Only BiDi portions are allowed to use the common underlining font" )
1502
1503 do
1504 {
1505 if ( bHasGrid )
1506 {
1507 if( rMulti.HasRotation() )
1508 {
1509 const sal_uInt16 nAdjustment = ( pLay->Height() - pPor->Height() ) / 2 +
1510 pPor->GetAscent();
1511 if( rMulti.IsRevers() )
1512 GetInfo().X( nOfst - nAdjustment );
1513 else
1514 GetInfo().X( nOfst + nAdjustment );
1515 }
1516 else
1517 {
1518 // special treatment for ruby portions in grid mode
1519 SwTwips nAdjustment = 0;
1520 if ( rMulti.IsRuby() )
1521 {
1522 if ( bRubyTop != ( pLay == &rMulti.GetRoot() ) )
1523 // adjust base text
1524 nAdjustment = ( pCurr->Height() - nRubyHeight - pPor->Height() ) / 2;
1525 else if ( bRubyTop )
1526 // adjust upper ruby text
1527 nAdjustment = nRubyHeight - pPor->Height();
1528 // else adjust lower ruby text
1529 }
1530
1531 GetInfo().Y( nOfst + nAdjustment + pPor->GetAscent() );
1532 }
1533 }
1534 else if( rMulti.HasRotation() )
1535 {
1536 if( rMulti.IsRevers() )
1537 GetInfo().X( nOfst - AdjustBaseLine( *pLay, pPor, 0, 0, sal_True ) );
1538 else
1539 GetInfo().X( nOfst + AdjustBaseLine( *pLay, pPor ) );
1540 }
1541 else
1542 GetInfo().Y( nOfst + AdjustBaseLine( *pLay, pPor ) );
1543
1544 sal_Bool bSeeked = sal_True;
1545 GetInfo().SetLen( pPor->GetLen() );
1546
1547 if( bRest && pPor->InFldGrp() && !pPor->GetLen() )
1548 {
1549 if( ((SwFldPortion*)pPor)->HasFont() )
1550 bSeeked = sal_False;
1551 else
1552 SeekAndChgBefore( GetInfo() );
1553 }
1554 else if( pPor->InTxtGrp() || pPor->InFldGrp() || pPor->InTabGrp() )
1555 SeekAndChg( GetInfo() );
1556 else if ( !bFirst && pPor->IsBreakPortion() && GetInfo().GetOpt().IsParagraph() )
1557 {
1558 if( GetRedln() )
1559 SeekAndChg( GetInfo() );
1560 else
1561 SeekAndChgBefore( GetInfo() );
1562 }
1563 else
1564 bSeeked = sal_False;
1565
1566 SwLinePortion *pNext = pPor->GetPortion();
1567 if(GetInfo().OnWin() && pNext && !pNext->Width() )
1568 {
1569 if ( !bSeeked )
1570 SeekAndChg( GetInfo() );
1571 pNext->PrePaint( GetInfo(), pPor );
1572 }
1573
1574 CheckSpecialUnderline( pPor );
1575 SwUnderlineFont* pUnderLineFnt = GetInfo().GetUnderFnt();
1576 if ( pUnderLineFnt )
1577 {
1578 if ( rMulti.IsDouble() )
1579 pUnderLineFnt->GetFont().SetProportion( 50 );
1580 pUnderLineFnt->SetPos( GetInfo().GetPos() );
1581 }
1582
1583 if ( rMulti.IsBidi() )
1584 {
1585 // we do not allow any rotation inside a bidi portion
1586 SwFont* pTmpFont = GetInfo().GetFont();
1587 pTmpFont->SetVertical( 0, GetInfo().GetTxtFrm()->IsVertical() );
1588 }
1589
1590 if( pPor->IsMultiPortion() && ((SwMultiPortion*)pPor)->IsBidi() )
1591 {
1592 // but we do allow nested bidi portions
1593 ASSERT( rMulti.IsBidi(), "Only nesting of bidi portions is allowed" )
1594 PaintMultiPortion( rPaint, (SwMultiPortion&)*pPor, &rMulti );
1595 }
1596 else
1597 pPor->Paint( GetInfo() );
1598
1599 if( GetFnt()->IsURL() && pPor->InTxtGrp() )
1600 GetInfo().NotifyURL( *pPor );
1601
1602 bFirst &= !pPor->GetLen();
1603 if( pNext || !pPor->IsMarginPortion() )
1604 pPor->Move( GetInfo() );
1605
1606 pPor = pNext;
1607
1608 // If there's no portion left, we go to the next line
1609 if( !pPor && pLay->GetNext() )
1610 {
1611 pLay = pLay->GetNext();
1612 pPor = pLay->GetFirstPortion();
1613 bRest = pLay->IsRest();
1614 aManip.SecondLine();
1615
1616 // delete underline font
1617 delete GetInfo().GetUnderFnt();
1618 GetInfo().SetUnderFnt( 0 );
1619
1620 if( rMulti.HasRotation() )
1621 {
1622 if( rMulti.IsRevers() )
1623 {
1624 nOfst += pLay->Height();
1625 GetInfo().Y( nOldY - rMulti.GetAscent() );
1626 }
1627 else
1628 {
1629 nOfst -= pLay->Height();
1630 GetInfo().Y( nOldY - rMulti.GetAscent() + rMulti.Height() );
1631 }
1632 }
1633 else if ( bHasGrid && rMulti.IsRuby() )
1634 {
1635 GetInfo().X( nTmpX );
1636 if ( bRubyTop )
1637 {
1638 nOfst += nRubyHeight;
1639 GetInfo().SetSnapToGrid( sal_True );
1640 }
1641 else
1642 {
1643 nOfst += pCurr->Height() - nRubyHeight;
1644 GetInfo().SetSnapToGrid( sal_False );
1645 }
1646 } else
1647 {
1648 GetInfo().X( nTmpX );
1649 // We switch to the baseline of the next inner line
1650 nOfst += rMulti.GetRoot().Height();
1651 }
1652 }
1653 } while( pPor );
1654
1655 if ( bRubyInGrid )
1656 GetInfo().SetSnapToGrid( bOldGridModeAllowed );
1657
1658 // delete underline font
1659 if ( ! rMulti.IsBidi() )
1660 {
1661 delete GetInfo().GetUnderFnt();
1662 GetInfo().SetUnderFnt( 0 );
1663 }
1664
1665 GetInfo().SetIdx( nOldIdx );
1666 GetInfo().Y( nOldY );
1667
1668 if( rMulti.HasBrackets() )
1669 {
1670 xub_StrLen nTmpOldIdx = GetInfo().GetIdx();
1671 GetInfo().SetIdx(((SwDoubleLinePortion&)rMulti).GetBrackets()->nStart);
1672 SeekAndChg( GetInfo() );
1673 GetInfo().X( nOldX );
1674 ((SwDoubleLinePortion&)rMulti).PaintBracket( GetInfo(),
1675 aManip.GetSpaceAdd(), sal_False );
1676 GetInfo().SetIdx( nTmpOldIdx );
1677 }
1678 // Restore the saved values
1679 GetInfo().X( nOldX );
1680 GetInfo().SetLen( nOldLen );
1681 delete pFontSave;
1682 delete pTmpFnt;
1683 SetPropFont( 0 );
1684 }
1685
lcl_ExtractFieldFollow(SwLineLayout * pLine,SwLinePortion * & rpFld)1686 sal_Bool lcl_ExtractFieldFollow( SwLineLayout* pLine, SwLinePortion* &rpFld )
1687 {
1688 SwLinePortion* pLast = pLine;
1689 rpFld = pLine->GetPortion();
1690 while( rpFld && !rpFld->InFldGrp() )
1691 {
1692 pLast = rpFld;
1693 rpFld = rpFld->GetPortion();
1694 }
1695 sal_Bool bRet = rpFld != 0;
1696 if( bRet )
1697 {
1698 if( ((SwFldPortion*)rpFld)->IsFollow() )
1699 {
1700 rpFld->Truncate();
1701 pLast->SetPortion( NULL );
1702 }
1703 else
1704 rpFld = NULL;
1705 }
1706 pLine->Truncate();
1707 return bRet;
1708 }
1709
1710 /*----------------------------------------------------
1711 * lcl_TruncateMultiPortion
1712 * If a multi portion completely has to go to the
1713 * next line, this function is called to truncate
1714 * the rest of the remaining multi portion
1715 * --------------------------------------------------*/
1716
lcl_TruncateMultiPortion(SwMultiPortion & rMulti,SwTxtFormatInfo & rInf,xub_StrLen nStartIdx)1717 void lcl_TruncateMultiPortion( SwMultiPortion& rMulti, SwTxtFormatInfo& rInf,
1718 xub_StrLen nStartIdx )
1719 {
1720 rMulti.GetRoot().Truncate();
1721 rMulti.GetRoot().SetLen(0);
1722 rMulti.GetRoot().Width(0);
1723 // rMulti.CalcSize( *this, aInf );
1724 if ( rMulti.GetRoot().GetNext() )
1725 {
1726 rMulti.GetRoot().GetNext()->Truncate();
1727 rMulti.GetRoot().GetNext()->SetLen( 0 );
1728 rMulti.GetRoot().GetNext()->Width( 0 );
1729 }
1730 rMulti.Width( 0 );
1731 rMulti.SetLen(0);
1732 rInf.SetIdx( nStartIdx );
1733 }
1734
1735 /*-----------------------------------------------------------------------------
1736 * SwTxtFormatter::BuildMultiPortion
1737 * manages the formatting of a SwMultiPortion. External, for the calling
1738 * function, it seems to be a normal Format-function, internal it is like a
1739 * SwTxtFrm::_Format with multiple BuildPortions
1740 *---------------------------------------------------------------------------*/
1741
BuildMultiPortion(SwTxtFormatInfo & rInf,SwMultiPortion & rMulti)1742 sal_Bool SwTxtFormatter::BuildMultiPortion( SwTxtFormatInfo &rInf,
1743 SwMultiPortion& rMulti )
1744 {
1745 SwTwips nMaxWidth = rInf.Width();
1746 KSHORT nOldX = 0;
1747
1748 if( rMulti.HasBrackets() )
1749 {
1750 xub_StrLen nOldIdx = rInf.GetIdx();
1751 rInf.SetIdx( ((SwDoubleLinePortion&)rMulti).GetBrackets()->nStart );
1752 SeekAndChg( rInf );
1753 nOldX = KSHORT(GetInfo().X());
1754 ((SwDoubleLinePortion&)rMulti).FormatBrackets( rInf, nMaxWidth );
1755 rInf.SetIdx( nOldIdx );
1756 }
1757
1758 SeekAndChg( rInf );
1759 SwFontSave *pFontSave;
1760 if( rMulti.IsDouble() )
1761 {
1762 SwFont* pTmpFnt = new SwFont( *rInf.GetFont() );
1763 if( rMulti.IsDouble() )
1764 {
1765 SetPropFont( 50 );
1766 pTmpFnt->SetProportion( GetPropFont() );
1767 }
1768 pFontSave = new SwFontSave( rInf, pTmpFnt, this );
1769 }
1770 else
1771 pFontSave = NULL;
1772
1773 SwLayoutModeModifier aLayoutModeModifier( *GetInfo().GetOut() );
1774 if ( rMulti.IsBidi() )
1775 {
1776 // set layout mode
1777 aLayoutModeModifier.Modify( ! rInf.GetTxtFrm()->IsRightToLeft() );
1778 }
1779
1780 SwTwips nTmpX = 0;
1781
1782 if( rMulti.HasRotation() )
1783 {
1784 // For nMaxWidth we take the height of the body frame.
1785 // #i25067#: If the current frame is inside a table, we restrict
1786 // nMaxWidth to the current frame height, unless the frame size
1787 // attribute is set to variable size:
1788
1789 // We set nTmpX (which is used for portion calculating) to the
1790 // current Y value
1791 const SwPageFrm* pPage = pFrm->FindPageFrm();
1792 ASSERT( pPage, "No page in frame!");
1793 const SwLayoutFrm* pUpperFrm = pPage;
1794
1795 if ( pFrm->IsInTab() )
1796 {
1797 pUpperFrm = pFrm->GetUpper();
1798 while ( pUpperFrm && !pUpperFrm->IsCellFrm() )
1799 pUpperFrm = pUpperFrm->GetUpper();
1800 ASSERT( pUpperFrm, "pFrm is in table but does not have an upper cell frame" )
1801 const SwTableLine* pLine = ((SwRowFrm*)pUpperFrm->GetUpper())->GetTabLine();
1802 const SwFmtFrmSize& rFrmFmtSize = pLine->GetFrmFmt()->GetFrmSize();
1803 if ( ATT_VAR_SIZE == rFrmFmtSize.GetHeightSizeType() )
1804 pUpperFrm = pPage;
1805 }
1806 if ( pUpperFrm == pPage && !pFrm->IsInFtn() )
1807 pUpperFrm = pPage->FindBodyCont();
1808
1809 nMaxWidth = pUpperFrm ?
1810 ( rInf.GetTxtFrm()->IsVertical() ?
1811 pUpperFrm->Prt().Width() :
1812 pUpperFrm->Prt().Height() ) :
1813 USHRT_MAX;
1814 }
1815 else
1816 nTmpX = rInf.X();
1817
1818 SwMultiPortion* pOldMulti = pMulti;
1819
1820 pMulti = &rMulti;
1821 SwLineLayout *pOldCurr = pCurr;
1822 xub_StrLen nOldStart = GetStart();
1823 SwTwips nMinWidth = nTmpX + 1;
1824 SwTwips nActWidth = nMaxWidth;
1825 const xub_StrLen nStartIdx = rInf.GetIdx();
1826 xub_StrLen nMultiLen = rMulti.GetLen();
1827
1828 SwLinePortion *pFirstRest;
1829 SwLinePortion *pSecondRest;
1830 if( rMulti.IsFormatted() )
1831 {
1832 if( !lcl_ExtractFieldFollow( &rMulti.GetRoot(), pFirstRest )
1833 && rMulti.IsDouble() && rMulti.GetRoot().GetNext() )
1834 lcl_ExtractFieldFollow( rMulti.GetRoot().GetNext(), pFirstRest );
1835 if( !rMulti.IsDouble() && rMulti.GetRoot().GetNext() )
1836 lcl_ExtractFieldFollow( rMulti.GetRoot().GetNext(), pSecondRest );
1837 else
1838 pSecondRest = NULL;
1839 }
1840 else
1841 {
1842 pFirstRest = rMulti.GetRoot().GetPortion();
1843 pSecondRest = rMulti.GetRoot().GetNext() ?
1844 rMulti.GetRoot().GetNext()->GetPortion() : NULL;
1845 if( pFirstRest )
1846 rMulti.GetRoot().SetPortion( NULL );
1847 if( pSecondRest )
1848 rMulti.GetRoot().GetNext()->SetPortion( NULL );
1849 rMulti.SetFormatted();
1850 nMultiLen = nMultiLen - rInf.GetIdx();
1851 }
1852
1853 // save some values
1854 const XubString* pOldTxt = &(rInf.GetTxt());
1855 const SwTwips nOldPaintOfst = rInf.GetPaintOfst();
1856
1857 XubString aMultiStr( rInf.GetTxt(), 0, nMultiLen + rInf.GetIdx() );
1858 rInf.SetTxt( aMultiStr );
1859 SwTxtFormatInfo aInf( rInf, rMulti.GetRoot(), nActWidth );
1860 // Do we allow break cuts? The FirstMulti-Flag is evaluated during
1861 // line break determination.
1862 sal_Bool bFirstMulti = rInf.GetIdx() != rInf.GetLineStart();
1863
1864 SwLinePortion *pNextFirst = NULL;
1865 SwLinePortion *pNextSecond = NULL;
1866 sal_Bool bRet = sal_False;
1867
1868 GETGRID( pFrm->FindPageFrm() )
1869 const sal_Bool bHasGrid = pGrid && GRID_LINES_CHARS == pGrid->GetGridType();
1870
1871 sal_uInt16 nGridWidth = 0;
1872 sal_uInt16 nRubyHeight = 0;
1873 sal_Bool bRubyTop = sal_False;
1874
1875 if ( bHasGrid )
1876 {
1877 nGridWidth = pGrid->GetBaseHeight();
1878 nRubyHeight = pGrid->GetRubyHeight();
1879 bRubyTop = ! pGrid->GetRubyTextBelow();
1880 }
1881
1882 do
1883 {
1884 pCurr = &rMulti.GetRoot();
1885 nStart = nStartIdx;
1886 bRet = sal_False;
1887 FormatReset( aInf );
1888 aInf.X( nTmpX );
1889 aInf.Width( KSHORT(nActWidth) );
1890 aInf.RealWidth( KSHORT(nActWidth) );
1891 aInf.SetFirstMulti( bFirstMulti );
1892 aInf.SetNumDone( rInf.IsNumDone() );
1893 aInf.SetFtnDone( rInf.IsFtnDone() );
1894
1895 if( pFirstRest )
1896 {
1897 ASSERT( pFirstRest->InFldGrp(), "BuildMulti: Fieldrest expected");
1898 SwFldPortion *pFld =
1899 ((SwFldPortion*)pFirstRest)->Clone(
1900 ((SwFldPortion*)pFirstRest)->GetExp() );
1901 pFld->SetFollow( sal_True );
1902 aInf.SetRest( pFld );
1903 }
1904 aInf.SetRuby( rMulti.IsRuby() && rMulti.OnTop() );
1905
1906 // in grid mode we temporarily have to disable the grid for the ruby line
1907 const sal_Bool bOldGridModeAllowed = GetInfo().SnapToGrid();
1908 if ( bHasGrid && aInf.IsRuby() && bRubyTop )
1909 aInf.SetSnapToGrid( sal_False );
1910
1911 // If there's no more rubytext, then buildportion is forbidden
1912 if( pFirstRest || !aInf.IsRuby() )
1913 BuildPortions( aInf );
1914
1915 aInf.SetSnapToGrid( bOldGridModeAllowed );
1916
1917 rMulti.CalcSize( *this, aInf );
1918 pCurr->SetRealHeight( pCurr->Height() );
1919
1920 if( rMulti.IsBidi() )
1921 {
1922 pNextFirst = aInf.GetRest();
1923 break;
1924 }
1925
1926 if( rMulti.HasRotation() && !rMulti.IsDouble() )
1927 break;
1928 // second line has to be formatted
1929 else if( pCurr->GetLen()<nMultiLen || rMulti.IsRuby() || aInf.GetRest())
1930 {
1931 xub_StrLen nFirstLen = pCurr->GetLen();
1932 delete pCurr->GetNext();
1933 pCurr->SetNext( new SwLineLayout() );
1934 pCurr = pCurr->GetNext();
1935 nStart = aInf.GetIdx();
1936 aInf.X( nTmpX );
1937 SwTxtFormatInfo aTmp( aInf, *pCurr, nActWidth );
1938 if( rMulti.IsRuby() )
1939 {
1940 aTmp.SetRuby( !rMulti.OnTop() );
1941 pNextFirst = aInf.GetRest();
1942 if( pSecondRest )
1943 {
1944 ASSERT( pSecondRest->InFldGrp(), "Fieldrest expected");
1945 SwFldPortion *pFld = ((SwFldPortion*)pSecondRest)->Clone(
1946 ((SwFldPortion*)pSecondRest)->GetExp() );
1947 pFld->SetFollow( sal_True );
1948 aTmp.SetRest( pFld );
1949 }
1950 if( !rMulti.OnTop() && nFirstLen < nMultiLen )
1951 bRet = sal_True;
1952 }
1953 else
1954 aTmp.SetRest( aInf.GetRest() );
1955 aInf.SetRest( NULL );
1956
1957 // in grid mode we temporarily have to disable the grid for the ruby line
1958 if ( bHasGrid && aTmp.IsRuby() && ! bRubyTop )
1959 aTmp.SetSnapToGrid( sal_False );
1960
1961 BuildPortions( aTmp );
1962
1963 aTmp.SetSnapToGrid( bOldGridModeAllowed );
1964
1965 rMulti.CalcSize( *this, aInf );
1966 rMulti.GetRoot().SetRealHeight( rMulti.GetRoot().Height() );
1967 pCurr->SetRealHeight( pCurr->Height() );
1968 if( rMulti.IsRuby() )
1969 {
1970 pNextSecond = aTmp.GetRest();
1971 if( pNextFirst )
1972 bRet = sal_True;
1973 }
1974 else
1975 pNextFirst = aTmp.GetRest();
1976 if( ( !aTmp.IsRuby() && nFirstLen + pCurr->GetLen() < nMultiLen )
1977 || aTmp.GetRest() )
1978 // our guess for width of multiportion was too small,
1979 // text did not fit into multiportion
1980 bRet = sal_True;
1981 }
1982 if( rMulti.IsRuby() )
1983 break;
1984 if( bRet )
1985 {
1986 // our guess for multiportion width was too small,
1987 // we set min to act
1988 nMinWidth = nActWidth;
1989 nActWidth = ( 3 * nMaxWidth + nMinWidth + 3 ) / 4;
1990 if ( nActWidth == nMaxWidth && rInf.GetLineStart() == rInf.GetIdx() )
1991 // we have too less space, we must allow break cuts
1992 // ( the first multi flag is considered during TxtPortion::_Format() )
1993 bFirstMulti = sal_False;
1994 if( nActWidth <= nMinWidth )
1995 break;
1996 }
1997 else
1998 {
1999 // For Solaris, this optimization can causes trouble:
2000 // Setting this to the portion width ( = rMulti.Width() )
2001 // can make GetTextBreak inside SwTxtGuess::Guess return to small
2002 // values. Therefore we add some extra twips.
2003 if( nActWidth > nTmpX + rMulti.Width() + 6 )
2004 nActWidth = nTmpX + rMulti.Width() + 6;
2005 nMaxWidth = nActWidth;
2006 nActWidth = ( 3 * nMaxWidth + nMinWidth + 3 ) / 4;
2007 if( nActWidth >= nMaxWidth )
2008 break;
2009 // we do not allow break cuts during formatting
2010 bFirstMulti = sal_True;
2011 }
2012 delete pNextFirst;
2013 pNextFirst = NULL;
2014 } while ( sal_True );
2015
2016 pMulti = pOldMulti;
2017
2018 pCurr = pOldCurr;
2019 nStart = nOldStart;
2020 SetPropFont( 0 );
2021
2022 rMulti.SetLen( rMulti.GetRoot().GetLen() + ( rMulti.GetRoot().GetNext() ?
2023 rMulti.GetRoot().GetNext()->GetLen() : 0 ) );
2024
2025 if( rMulti.IsDouble() )
2026 {
2027 ((SwDoubleLinePortion&)rMulti).CalcBlanks( rInf );
2028 if( ((SwDoubleLinePortion&)rMulti).GetLineDiff() )
2029 {
2030 SwLineLayout* pLine = &rMulti.GetRoot();
2031 if( ((SwDoubleLinePortion&)rMulti).GetLineDiff() > 0 )
2032 {
2033 rInf.SetIdx( nStartIdx + pLine->GetLen() );
2034 pLine = pLine->GetNext();
2035 }
2036 if( pLine )
2037 {
2038 GetInfo().SetMulti( sal_True );
2039 CalcNewBlock( pLine, NULL, rMulti.Width() );
2040 GetInfo().SetMulti( sal_False );
2041 }
2042 rInf.SetIdx( nStartIdx );
2043 }
2044 if( ((SwDoubleLinePortion&)rMulti).GetBrackets() )
2045 {
2046 rMulti.Width( rMulti.Width() +
2047 ((SwDoubleLinePortion&)rMulti).BracketWidth() );
2048 GetInfo().X( nOldX );
2049 }
2050 }
2051 else
2052 {
2053 rMulti.ActualizeTabulator();
2054 if( rMulti.IsRuby() )
2055 {
2056 ((SwRubyPortion&)rMulti).Adjust( rInf );
2057 ((SwRubyPortion&)rMulti).CalcRubyOffset();
2058 }
2059 }
2060 if( rMulti.HasRotation() )
2061 {
2062 SwTwips nH = rMulti.Width();
2063 SwTwips nAsc = rMulti.GetAscent() + ( nH - rMulti.Height() )/2;
2064 if( nAsc > nH )
2065 nAsc = nH;
2066 else if( nAsc < 0 )
2067 nAsc = 0;
2068 rMulti.Width( rMulti.Height() );
2069 rMulti.Height( KSHORT(nH) );
2070 rMulti.SetAscent( KSHORT(nAsc) );
2071 bRet = ( rInf.GetPos().X() + rMulti.Width() > rInf.Width() ) &&
2072 nStartIdx != rInf.GetLineStart();
2073 }
2074 else if ( rMulti.IsBidi() )
2075 {
2076 bRet = rMulti.GetLen() < nMultiLen || pNextFirst;
2077 }
2078
2079 // line break has to be performed!
2080 if( bRet )
2081 {
2082 ASSERT( !pNextFirst || pNextFirst->InFldGrp(),
2083 "BuildMultiPortion: Surprising restportion, field expected" );
2084 SwMultiPortion *pTmp;
2085 if( rMulti.IsDouble() )
2086 pTmp = new SwDoubleLinePortion( ((SwDoubleLinePortion&)rMulti),
2087 nMultiLen + rInf.GetIdx() );
2088 else if( rMulti.IsRuby() )
2089 {
2090 ASSERT( !pNextSecond || pNextSecond->InFldGrp(),
2091 "BuildMultiPortion: Surprising restportion, field expected" );
2092
2093 if ( rInf.GetIdx() == rInf.GetLineStart() )
2094 {
2095 // the ruby portion has to be split in two portions
2096 pTmp = new SwRubyPortion( ((SwRubyPortion&)rMulti),
2097 nMultiLen + rInf.GetIdx() );
2098
2099 if( pNextSecond )
2100 {
2101 pTmp->GetRoot().SetNext( new SwLineLayout() );
2102 pTmp->GetRoot().GetNext()->SetPortion( pNextSecond );
2103 }
2104 pTmp->SetFollowFld();
2105 }
2106 else
2107 {
2108 // we try to keep our ruby portion together
2109 lcl_TruncateMultiPortion( rMulti, rInf, nStartIdx );
2110 pTmp = 0;
2111 }
2112 }
2113 else if( rMulti.HasRotation() )
2114 {
2115 // we try to keep our rotated portion together
2116 lcl_TruncateMultiPortion( rMulti, rInf, nStartIdx );
2117 pTmp = new SwRotatedPortion( nMultiLen + rInf.GetIdx(),
2118 rMulti.GetDirection() );
2119 }
2120 // during a recursion of BuildMultiPortions we may not build
2121 // a new SwBidiPortion, this would cause a memory leak
2122 else if( rMulti.IsBidi() && ! pMulti )
2123 {
2124 if ( ! rMulti.GetLen() )
2125 lcl_TruncateMultiPortion( rMulti, rInf, nStartIdx );
2126
2127 // If there is a HolePortion at the end of the bidi portion,
2128 // it has to be moved behind the bidi portion. Otherwise
2129 // the visual cursor traveling gets into trouble.
2130 SwLineLayout& aRoot = rMulti.GetRoot();
2131 SwLinePortion* pPor = aRoot.GetFirstPortion();
2132 while ( pPor )
2133 {
2134 if ( pPor->GetPortion() && pPor->GetPortion()->IsHolePortion() )
2135 {
2136 SwLinePortion* pHolePor = pPor->GetPortion();
2137 pPor->SetPortion( NULL );
2138 aRoot.SetLen( aRoot.GetLen() - pHolePor->GetLen() );
2139 rMulti.SetLen( rMulti.GetLen() - pHolePor->GetLen() );
2140 rMulti.SetPortion( pHolePor );
2141 break;
2142 }
2143 pPor = pPor->GetPortion();
2144 }
2145
2146 pTmp = new SwBidiPortion( nMultiLen + rInf.GetIdx(),
2147 ((SwBidiPortion&)rMulti).GetLevel() );
2148 }
2149 else
2150 pTmp = NULL;
2151
2152 if ( ! rMulti.GetLen() && rInf.GetLast() )
2153 {
2154 SeekAndChgBefore( rInf );
2155 rInf.GetLast()->FormatEOL( rInf );
2156 }
2157
2158 if( pNextFirst && pTmp )
2159 {
2160 pTmp->SetFollowFld();
2161 pTmp->GetRoot().SetPortion( pNextFirst );
2162 }
2163 else
2164 // A follow field portion is still waiting. If nobody wants it,
2165 // we delete it.
2166 delete pNextFirst;
2167
2168 rInf.SetRest( pTmp );
2169 }
2170
2171 rInf.SetTxt( *pOldTxt );
2172 rInf.SetPaintOfst( nOldPaintOfst );
2173 rInf.SetStop( aInf.IsStop() );
2174 rInf.SetNumDone( sal_True );
2175 rInf.SetFtnDone( sal_True );
2176 SeekAndChg( rInf );
2177 delete pFirstRest;
2178 delete pSecondRest;
2179 delete pFontSave;
2180 return bRet;
2181 }
2182
2183 /*-----------------08.11.00 09:29-------------------
2184 * SwTxtFormatter::MakeRestPortion(..)
2185 * When a fieldportion at the end of line breaks and needs a following
2186 * fieldportion in the next line, then the "restportion" of the formatinfo
2187 * has to be set. Normally this happens during the formatting of the first
2188 * part of the fieldportion.
2189 * But sometimes the formatting starts at the line with the following part,
2190 * especially when the following part is on the next page.
2191 * In this case the MakeRestPortion-function has to create the following part.
2192 * The first parameter is the line that contains possibly a first part
2193 * of a field. When the function finds such field part, it creates the right
2194 * restportion. This may be a multiportion, e.g. if the field is surrounded by
2195 * a doubleline- or ruby-portion.
2196 * The second parameter is the start index of the line.
2197 * --------------------------------------------------*/
2198
MakeRestPortion(const SwLineLayout * pLine,xub_StrLen nPosition)2199 SwLinePortion* SwTxtFormatter::MakeRestPortion( const SwLineLayout* pLine,
2200 xub_StrLen nPosition )
2201 {
2202 if( !nPosition )
2203 return NULL;
2204 xub_StrLen nMultiPos = nPosition - pLine->GetLen();
2205 const SwMultiPortion *pTmpMulti = NULL;
2206 const SwMultiPortion *pHelpMulti = NULL;
2207 const SwLinePortion* pPor = pLine->GetFirstPortion();
2208 SwFldPortion *pFld = NULL;
2209 while( pPor )
2210 {
2211 if( pPor->GetLen() )
2212 {
2213 if( !pHelpMulti )
2214 {
2215 nMultiPos = nMultiPos + pPor->GetLen();
2216 pTmpMulti = NULL;
2217 }
2218 }
2219 if( pPor->InFldGrp() )
2220 {
2221 if( !pHelpMulti )
2222 pTmpMulti = NULL;
2223 pFld = (SwFldPortion*)pPor;
2224 }
2225 else if( pPor->IsMultiPortion() )
2226 {
2227 ASSERT( !pHelpMulti || pHelpMulti->IsBidi(),
2228 "Nested multiportions are forbidden." );
2229
2230 pFld = NULL;
2231 pTmpMulti = (SwMultiPortion*)pPor;
2232 }
2233 pPor = pPor->GetPortion();
2234 // If the last portion is a multi-portion, we enter it
2235 // and look for a field portion inside.
2236 // If we are already in a multiportion, we could change to the
2237 // next line
2238 if( !pPor && pTmpMulti )
2239 {
2240 if( pHelpMulti )
2241 { // We're already inside the multiportion, let's take the second
2242 // line, if we are in a double line portion
2243 if( !pHelpMulti->IsRuby() )
2244 pPor = pHelpMulti->GetRoot().GetNext();
2245 pTmpMulti = NULL;
2246 }
2247 else
2248 { // Now we enter a multiportion, in a ruby portion we take the
2249 // main line, not the phonetic line, in a doublelineportion we
2250 // starts with the first line.
2251 pHelpMulti = pTmpMulti;
2252 nMultiPos = nMultiPos - pHelpMulti->GetLen();
2253 if( pHelpMulti->IsRuby() && pHelpMulti->OnTop() )
2254 pPor = pHelpMulti->GetRoot().GetNext();
2255 else
2256 pPor = pHelpMulti->GetRoot().GetFirstPortion();
2257 }
2258 }
2259 }
2260 if( pFld && !pFld->HasFollow() )
2261 pFld = NULL;
2262
2263 SwLinePortion *pRest = NULL;
2264 if( pFld )
2265 {
2266 const SwTxtAttr *pHint = GetAttr( nPosition - 1 );
2267 if ( pHint
2268 && ( pHint->Which() == RES_TXTATR_FIELD
2269 || pHint->Which() == RES_TXTATR_ANNOTATION ) )
2270 {
2271 pRest = NewFldPortion( GetInfo(), pHint );
2272 if( pRest->InFldGrp() )
2273 ((SwFldPortion*)pRest)->TakeNextOffset( pFld );
2274 else
2275 {
2276 delete pRest;
2277 pRest = NULL;
2278 }
2279 }
2280 }
2281 if( !pHelpMulti )
2282 return pRest;
2283
2284 nPosition = nMultiPos + pHelpMulti->GetLen();
2285 SwMultiCreator* pCreate = GetInfo().GetMultiCreator( nMultiPos, 0 );
2286
2287 if ( !pCreate )
2288 {
2289 ASSERT( !pHelpMulti->GetLen(), "Multiportion without attribut?" );
2290 if ( nMultiPos )
2291 --nMultiPos;
2292 pCreate = GetInfo().GetMultiCreator( --nMultiPos, 0 );
2293 }
2294
2295 if( pRest || nMultiPos > nPosition || ( pHelpMulti->IsRuby() &&
2296 ((SwRubyPortion*)pHelpMulti)->GetRubyOffset() < STRING_LEN ) )
2297 {
2298 SwMultiPortion* pTmp;
2299 if( pHelpMulti->IsDouble() )
2300 pTmp = new SwDoubleLinePortion( *pCreate, nMultiPos );
2301 else if( pHelpMulti->IsBidi() )
2302 pTmp = new SwBidiPortion( nMultiPos, pCreate->nLevel );
2303 else if( pHelpMulti->IsRuby() )
2304 {
2305 sal_Bool bRubyTop;
2306 sal_Bool* pRubyPos = 0;
2307
2308 if ( GetInfo().SnapToGrid() )
2309 {
2310 GETGRID( pFrm->FindPageFrm() )
2311 if ( pGrid )
2312 {
2313 bRubyTop = ! pGrid->GetRubyTextBelow();
2314 pRubyPos = &bRubyTop;
2315 }
2316 }
2317
2318 pTmp = new SwRubyPortion( *pCreate, *GetInfo().GetFont(),
2319 *pFrm->GetTxtNode()->getIDocumentSettingAccess(),
2320 nMultiPos, ((SwRubyPortion*)pHelpMulti)->GetRubyOffset(),
2321 pRubyPos );
2322 }
2323 else if( pHelpMulti->HasRotation() )
2324 pTmp = new SwRotatedPortion( nMultiPos, pHelpMulti->GetDirection() );
2325 else
2326 {
2327 delete pCreate;
2328 return pRest;
2329 }
2330 delete pCreate;
2331 pTmp->SetFollowFld();
2332 if( pRest )
2333 {
2334 SwLineLayout *pLay = &pTmp->GetRoot();
2335 if( pTmp->IsRuby() && pTmp->OnTop() )
2336 {
2337 pLay->SetNext( new SwLineLayout() );
2338 pLay = pLay->GetNext();
2339 }
2340 pLay->SetPortion( pRest );
2341 }
2342 return pTmp;
2343 }
2344 return pRest;
2345 }
2346
2347
2348
2349 /*-----------------23.10.00 10:47-------------------
2350 * SwTxtCursorSave notes the start and current line of a SwTxtCursor,
2351 * sets them to the values for GetCrsrOfst inside a multiportion
2352 * and restores them in the destructor.
2353 * --------------------------------------------------*/
2354
SwTxtCursorSave(SwTxtCursor * pTxtCursor,SwMultiPortion * pMulti,SwTwips nY,sal_uInt16 & nX,xub_StrLen nCurrStart,long nSpaceAdd)2355 SwTxtCursorSave::SwTxtCursorSave( SwTxtCursor* pTxtCursor,
2356 SwMultiPortion* pMulti,
2357 SwTwips nY,
2358 sal_uInt16& nX,
2359 xub_StrLen nCurrStart,
2360 long nSpaceAdd )
2361 {
2362 pTxtCrsr = pTxtCursor;
2363 nStart = pTxtCursor->nStart;
2364 pTxtCursor->nStart = nCurrStart;
2365 pCurr = pTxtCursor->pCurr;
2366 pTxtCursor->pCurr = &pMulti->GetRoot();
2367 while( pTxtCursor->Y() + pTxtCursor->GetLineHeight() < nY &&
2368 pTxtCursor->Next() )
2369 ; // nothing
2370 nWidth = pTxtCursor->pCurr->Width();
2371 nOldProp = pTxtCursor->GetPropFont();
2372
2373 if ( pMulti->IsDouble() || pMulti->IsBidi() )
2374 {
2375 bSpaceChg = pMulti->ChgSpaceAdd( pTxtCursor->pCurr, nSpaceAdd );
2376
2377 sal_uInt16 nSpaceCnt;
2378 if ( pMulti->IsDouble() )
2379 {
2380 pTxtCursor->SetPropFont( 50 );
2381 nSpaceCnt = ((SwDoubleLinePortion*)pMulti)->GetSpaceCnt();
2382 }
2383 else
2384 {
2385 const xub_StrLen nOldIdx = pTxtCursor->GetInfo().GetIdx();
2386 pTxtCursor->GetInfo().SetIdx ( nCurrStart );
2387 nSpaceCnt = ((SwBidiPortion*)pMulti)->GetSpaceCnt(pTxtCursor->GetInfo());
2388 pTxtCursor->GetInfo().SetIdx ( nOldIdx );
2389 }
2390
2391 if( nSpaceAdd > 0 && !pMulti->HasTabulator() )
2392 pTxtCursor->pCurr->Width( static_cast<sal_uInt16>(nWidth + nSpaceAdd * nSpaceCnt / SPACING_PRECISION_FACTOR ) );
2393
2394 // For a BidiPortion we have to calculate the offset from the
2395 // end of the portion
2396 if ( nX && pMulti->IsBidi() )
2397 nX = pTxtCursor->pCurr->Width() - nX;
2398 }
2399 else
2400 bSpaceChg = sal_False;
2401 }
2402
~SwTxtCursorSave()2403 SwTxtCursorSave::~SwTxtCursorSave()
2404 {
2405 if( bSpaceChg )
2406 SwDoubleLinePortion::ResetSpaceAdd( pTxtCrsr->pCurr );
2407 pTxtCrsr->pCurr->Width( KSHORT(nWidth) );
2408 pTxtCrsr->pCurr = pCurr;
2409 pTxtCrsr->nStart = nStart;
2410 pTxtCrsr->SetPropFont( nOldProp );
2411 }
2412
2413 /* vim: set noet sw=4 ts=4: */
2414